SYNTHESIS OF NEW HIGH MOLECULAR WEIGHT AND REACTIVE LADDERLIKE POLYSILSESQUIOXANES*

Ladderlike polychloropropylsilsesquioxane (CP-T) was first synthesized by "stepwise coupling polymerization".The molecular weight of CP-T is as high as 1.7×10~5. It is a tough, elastic reactive ladderlike polymer and has good heat-resistant and adhesive properties. CP-T can further react with many nucleophilic reagents to generate new ladderlike reactivepolysilsesquioxanes, which can be used as potential precursors in the synthesis of functional ladderlike polymers.     

SYNTHESIS AND-CHARACTERIZATION OF THE SOLUBLE, HIGH MOLECULAR WEIGHT AND LADDERLIKE POLYHYDROSILSESQUIOXANE AND ITS COPOLYMERS

The high molecular ladderlike polyhydrosilsesquioxane (LPHSQ) and its copolymer, ladderlike random copolymethylhydrosilsesquioxane (LR-PMHSQ) and ladderlike block copolymethylsilsesqui-oxane(LB-PMHSQ) have been synthesized by a preaminolysis reaction of the corresponding trichlorosilane with 1 ,4-phenylene diamine(PDA) then by hydrolysis and polycondensation reactions The thermographs of these polymers measured by DSC method indicate that these macromolecular backbones are very rigid as seen from the DSC curves which are almost horizontal from room temperature until 350 ~C without noticeable glass transition. The content of Si—H group in the polymers can be regulated by changing the composition of the two copolymerized monomers. So the ladderlike polymers including its copolymers can be the useful precursors for the functional polymers, especially such as fishbone-like liquid crystalline polymers.     

SYNTHESIS AND MESOMORPHIC PROPERTIES OF FISHBONE-LIKE LIQUID CRYSTALLINE POLYSILSESQUIOXANES——Ⅰ. FISHBONE-LIKE, β-DIKETONE-BASED LIQUID CRYSTALLINE POLYSILSESQUIOXANES AND THEIR COPPER COMPLEXES*

Two kinds of fishbone-like, β-diketone-based liquid crystalline polysilsesquioxanes(FBDKLCP'S), homopolymeric (H-FBDKLCP) and copolymeric (C-FBDKaLCP) have been first synthesized via the hydrosilylation reaction of a vinyl-terminated β-diketone with the homopolymeric ladderlike polyhydrosilsesquioxane (LPHSQ) and random copolymethylhydrosilsesquioxane (LRPMHSQ) respectively. These new kinds of FBDKLCP with M of 10~4 is thermotroic liquid crystalline polymer and its clearing temperatures T_i's and mesophase range △T's are much higher than those of the corresponding comb-like β-diketone liquid crystalline polysiloxane (DKLCP) by about 200℃. Similar results have been observed with the comparison of the two different structure Cu-coordinating compounds The significant increases in T_((?))'s and △T's of the FBDKLCP and Cu-FBDKLCP are mainly attributed to the great rigidity of the ladderlike polysilsesquioxane backbone.     

Surface study of ladderlike polyepoxysiloxanes

By using the two‐liquid geometric method and the three‐liquid acid‐base method, we are the first to determine the surface tensions of ladderlike polyepoxysiloxanes by the measurement of contact angles on thin films. Three kinds of ladderlike polymers have been synthesized: A C (which has the alkyl group and the epoxy group graft to the ladderlike polysilsesquioxane chain), A C P (which has the alkyl group, phenyl group, and epoxy group graft to the ladderlike chain), and A P (which has the phenyl group and epoxy group in the ladderlike side chain). The results showed that when different liquids and different theories are chosen to determine the surface energies, there are some minor differences in the values but a similar trend is still exhibited. The surface energies of these three polymers are in the following order of γ_{SA C} < γ_{SA C P} < γ_{SA P}. Interestingly, the surface energy increases for these polymers are mainly from the nonpolar part of the polyepoxysiloxanes. XPS surface analysis indicated that the Si and O ratios of these polymers at the air‐polymer interface were in the order of A C > A C P > A P, suggesting Si atoms were more likely to migrate to the polymer surface and the bulky effect of the phenyl groups could also interfere with the migration of the Si atoms. As a result, Si and O ratio at the interface determines the order of apparent surface energy for these three polymers. Experimental data also reflect that there are differences between the ladderlike polyepoxysiloxanes and the commercially available linear polysiloxanes. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 138–147, 2000     

STUDY ON THE SYNTHESIS AND CHARACTERIZATION OF THE SOLUBLE, HIGH MOLECULAR WEIGHT AND LAD D ERLIKE PO LYMETH YLSILSESQ UIO XANE

A new method for the preparation of a soluble ladderlike polymethylsilsesquioxane with high molecular weight ((?)=10~5—10~6) and low molecular weight distribution (D=Mw/Mn) in common solvents instead of the formerly used toxic methylisobutylketone has been developed. The structure and macromolecular regularity were characterized by IR, X-ray diffraction, and ~(29)Si-NMR spectroscopy. The thermal property was studied by TGA and DSC.     

Hydrogen‐bonding‐aided synthesis of novel ladderlike organobridged polysiloxane containing side‐chain naphthyl groups

With a hydrogen‐bonding template, a novel soluble aryl amide‐bridged ladderlike polysiloxane, containing naphthyl as the side‐chain group, has been successfully synthesized via a stepwise coupling polymerization. It is proposed that the monomer, N,N′‐di(3‐naphthyldiethoxylsilyl‐propyl)‐[4,4′‐oxybis(benzyl amide)], prepared by Grignard and hydrosilylation reactions, undergoes self‐assembly first via amido hydrogen bonding and then via hydrolysis, followed by condensation under controlled reaction conditions to yield a high molecular weight, soluble, dark yellow polymer. The analytical results (Fourier transform infrared, ¹H NMR, ²⁹Si NMR, X‐ray diffraction, differential scanning calorimetry, and vapor pressure osmometry) show that the polymer possesses an ordered ladderlike architecture. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 636–644, 2003     

Synthesis and Characterization of Novel Poly(Arylene Ether)s from 1,3‐bis(4‐Hydroxyphenyl) Benzene

Abstract

Several poly(aryl ether)s have been prepared by the condensation of 1,3‐bis(4‐hydroxy phenyl) benzene with different trifluoromethyl activated bis‐fluoro compounds. IR, ¹H and ¹³C NMR, and elemental analyses have established the resulting polymer structures. The properties of the polymers have been evaluated by DSC, TGA, dynamic mechanical analysis (DMA) and stress–strain analysis. The polymers 1a and 1c showed semi‐crystalline behavior as evident by sharp crystalline melting peaks at 299°C and 330°C along with glass transitions at 202°C and 216°C, respectively. The polymers showed very good thermal stability in air, high modulus, and high tensile strength with low elongation at break.     

Crystal engineering: Supramolecular structures by cocrystallization ofMeso-1,2-diphenyl-1,2-ethanediol and bisimines,simple cases of molecular recognition

The crystal structures of molecular complexes betweenmeso- 1,2-diphenyl-1,2-ethanediol and two bisimines (N,N-(dibenzylidene)-ethylenediamine and glyoxylidene-bis(2,4-dimethyl-3-pentyl-amine) are reported at different temperatures. The structure-determining motif of the cocrystalline arrangement is one single O-H . N hydrogen bond resulting in infinite ladderlike polymers. The supramolecular structure is formed by recognition of fitting species: Thed- orl-isomers do not arrange in such structures.¹H NMR experiments show that no prearrangements take place by forming complexes in solution.     

TEMPERATURE DEPENDENCE OF THE FLUORESCENCE SPECTRA OF LADDERLIKE POLYPHENYLSILSESQUIOXANE AND LADDERLIKE 1,4-PHENYLENE-BRIDGED POLYVINYLSILOXANE

Fluorescence spectra of ladderlike polyphenylsilsesquioxane (LPPS) and ladderlike 1,4-phenylene-bridgedpolyvinylsiloxane (LPPVS) have been measured as a function of temperature (4-55℃), in dilute tetrahydrofuran solution.The excimer (I_E) to monomer (I_M) intensity ratio (I_E/I_M) of LPPS dilute solution shows a double linear Arrhenius plot with abreak point ascribable to a transition temperature T_t This behavior has not been found for single chain polyorganosiloxanes.When InI_E of LPPS was plotted against I/T it also gave a double linear plot with one break point, which was found in singlechain polyorganosiloxanes. The different behaviors between LPPS and single chain polyorganosiloxanes may be mainlyattributed to the relatively rigid double-chain macromolecular backbone of LPPS. However, the In(I_E/I_M) of dilute LPPVSsolution versus I/T shows a simple linear variation with a positive slope which confirms our proposition. The differencebetween the fluorescence results of LPPS and those of LPPVS may possibly derive from their structure differences andcooperative motion in backbone chain bonds.     

SYNTHESIS AND CHARACTERIZATION OF A NOVEL REACTIVE OLIGOMERIC LADDERLIKE COPOLYMETHYL-AMINOPROPYL SILSESQUIOXANE

A novel ordered reactive oligomeric ladderlike copolymethyl-aminopropylsilsesquioxane (Me-AP-T), was successfully synthesized by an efficient hydrosilylation graft reaction of 1,1,1-trimethyl-N-2-propenyl-silanamine with a reactive oligomeric |adderlike copolymethyl-hydrosilsesquioxane (Me-H-T), which was prepared by “supramolecular chemistry-dictated stepwise coupling polymerization” process. FT-IR, ^1H- and ^29Si-NMR spectra show that hydrosilylation reaction proceeds completely. Moreover, ^1H-NMR spectra also indicate that both the molar ratios of ≡SiMe group to Si-H and ≡SiMe group to ≡SiPrNH2 are approximately 1:1 respectively based on the ratio of integrated resonance areas of the different groups. XRD analysis and ^29Si-NMR spectra are used for investigating the ladderlike structure of the polymers. A high Tg (128.38℃) of Me-AP-T shown in DSC measurement implies that the ordered reactive Me-AP-T macromolecules have much stiff chains.     

CHEMO-ENZYMATIC SYNTHESIS AND CHARACTERIZATION OF NOVEL FUNCTIONALIZED AMPHIPHILIC POLYMERS

ABSTRACT

The condensation copolymerization of Dimethyl 5-hydroxyisophthalate (1) with Polyethylene glycols (PEGs) (2a–2d) of varying molecular weights, catalyzed by Novozyme-435 (immobilized Candida antarctica lipase B) in bulk is reported. The structures of the resulting polymers, Poly[(poly(oxyethylene)-oxy-5-hydroxyisophthaloyl] (3a–3c) were characterized by ¹H (1D and 2D) and ¹³C-NMR spectroscopic experiments. Further, these polymers have been derivatized by attaching decanyl and 12-hydroxydodecanyl chains to the phenolic hydroxyl group. The resulting amphiphilic polymeric systems were characterized by detailed spectroscopic analysis. Light Scattering Photometry as well as Gel Per meation Chromatography were used to evaluate the particle size and molecular weights of the polymers. In principle, the method developed is flexible so that it can be used to generate a wide array of functionalized amphiphilic polymers. In the absence of biocatalytic transformation, such structural control would be extremely difficult or currently impossible to obtain.     

Perylene diimide copolymers with dithienothiophene and dithienopyrrole: Use in n‐channel and ambipolar field‐effect transistors

Solution‐processable polymers consisting of perylene diimide (PDI) acceptor moieties alternating with dithienothiophene (DTT), N‐dodecyl‐dithienopyrrole (DTP), or oligomers of these donor groups have been synthesized. We have, in addition to varying the donor, varied the N,N′ substituents of the PDIs. The thermal, optical, electrochemical, and charge‐transport properties of the polymers have been investigated. The polymers show broad absorption extending from 300 to 1000 nm with optical band gaps as low as 1.2 eV; the band gap decreases with increasing the conjugation length of donor block, or by replacement of DTT by DTP. The electron affinities of the polymers, estimated from electrochemical data, range from ?3.87 to ?4.01 eV and are slightly affected by the specific choice of donor moiety, while the estimated ionization potentials (?5.31 to ?5.92 eV) are more sensitive to the choice of donor. Bottom‐gate top‐contact organic field‐effect transistors based on the polymers generally exhibit n‐channel behavior with electron mobilities as high as 1.7 × 10^–2 cm²/V/s and on/off ratios as high as 10⁶; one PDI‐DTP polymer is an ambipolar transport material with electron mobility of 4 × 10^–4 cm²/V/s and hole mobility of 4 × 10^–5 cm²/V/s in air. There is considerable variation in the charge transport properties of the polymers with the chemical structures. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis,characterization, and thermal properties of ladderlike polyepoxysiloxanes

Starting from trichlorosilanes and using 1,4‐phenylenediamine as a template, we have synthesized some ladderlike poly(glycidyl‐co‐alkyl/aryl)siloxanes (polyepoxysiloxanes or polyepoxies for short). The structures of copolymers were confirmed through IR, ¹H NMR, elemental analyses, and gel permeation chromatography. Curing behaviors of these polyepoxies in the absence and presence of a curing agent have been studied with DSC. It was shown that these epoxies could be cured without any curing agent. Copolymers having aromatic groups showed higher curing reactivity than those having alkyl groups. The experimental results also demonstrate that the curing reaction occurred solely via epoxy functionality, not via the condensation reaction of the hydroxy groups located at the end of polymer main chains. The thermal stability of the cured polymers was examined by thermogravimetric analysis. The results confirm that polyepoxies with aromatic groups had better thermal stability than those with alkyl groups. It was also found that polyepoxies cured with a diamine have a higher thermal stability than those cured in the absence of a curing agent. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2215–2222, 2001     

Two novel branched chain polymeric metal complexes based on Cd(II), Zn(II) with fluorene,thiophene, 8‐hydroxyquinoline,and 1,10‐phenathroline ligand: synthesis,characterization, photovoltaic properties,and their application in DSSCs

Two novel side chain polymeric metal complexes (PFT‐Cd and PFT‐Zn) have been designed, synthesized, and characterized. These polymers were found to be good thermally stable and high glass transitions temperature, which indicate that these polymers could be applied as photovoltaic materials for dye‐sensitized solar cells (DSSCs). The obtained polymers exhibited good photovoltaic property. The DSSCs based on the PFT‐Cd and PFT‐Zn exhibited a maximum solar‐to‐electricity conversion efficiency (η) up to 3.37% (J_sc = 7.27 mA/cm², V_oc = 0.67 V, and FF = 0.69) and 3.01% (V_oc = 0.72 V, J_sc = 6.10 mA/cm², FF = 0.69) under simulated AM 1.5 G solar irradiation (90–95 mW/cm²). The result shows that these novel materials are suitable for the dye‐sensitized solar cells. Copyright © 2011 John Wiley & Sons, Ltd.     

Synthesis of highly fluorescent materials: Isoindole-containing polymers

A series of stable, highly fluorescent and highly phenylated isoindoles have been synthesized by treating the respective o-dibenzoylbenzenes with anilines at 200°C in the presence of a catalytic amount of p-toluenesulfonic acid. The correlation between the emission frequences and the structures of the isoindoles is described. The same reaction has also been used to transform a series of poly(o-dibenzoylbenzene)s into poly(isoindole)s. The resulting polymers have been studied by ¹H-NMR, DSC, TGA, and fluorescence spectra. They are highly fluorescent materials with high molecular weights, high glass transition temperatures, and high thermal stabilities. The tetraphenyl substituted isoindole-containing polymers have a maximum emission around 468 nm, whereas the diphenyl substituted isoindole-containing polymers have their maximum emission around 486 nm. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3293–3299, 1999     

Synthesis,characterization, and properties of novel ladderlike phosphorus‐containing polysilsesquioxanes

Novel ladderlike polysilsesquioxanes that contain phosphorus were successfully synthesized by the sol–gel method. The polysilsesquioxanes were characterized by Fourier transform infrared spectroscopy, ²⁹Si NMR, and X‐ray diffraction. The characterizations demonstrated that the polymer possesses a typical ladderlike structure. The thermogravimetric and differential scanning calorimetric data revealed that the polysilsesquioxanes possess excellent thermal stability. A kinetic analysis of thermal degradation showed that the activation energy of thermal degradation is 187 kJ/mol, according to Kissinger's method. The activation energy of thermal degradation normally increases with conversion (from 171 to 309 kJ/mol) according to Ozawa's method. The average activation energy, calculated by Ozawa's method, was 209 kJ/mol. The scanning electron microscopic photograph and Si and P mappings of ladderlike polysilsesquioxanes showed that the particles were uniformly dispersed at the molecular level and that the sizes of the polysilsesquioxane particles were less than 100 nm. The ultraviolet–visible spectra of the ladderlike polysilsesquioxanes revealed no absorbance in the range of 400–800 nm. Ladderlike polysilsesquioxanes possess excellent optical transparency and excellent flame retardance. This transmittance may be used as a criterion for identifying the formation of a homogeneous phase. These polymers have great potential in waveguide applications. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1371–1379, 2003     

Synthesis and properties of novel soluble poly(aryl amine ketone)s as high-performance polymers

A series of poly(aryl amine ketone)s have been obtained by the condensation polymerization of different aromatic dibromides with different primary aromatic diamines via palladium-catalyzed aryl amination reaction. The structures of polymers are characterized by means of FT-IR, 1H NMR spectroscopy, and elemental analysis. The results show an agreement with the proposed structures. DSC and TG measurements show that polymers possess high glass transition temperature (Tg>170℃) and good thermal stability with high decomposition temperatures (TD>450℃). These novel polymers also exhibit good mechanical behaviors and good solubility.     

Coordination chain polymeric assemblies of trivalent lanthanides with multidentate Schiff base synthetic, spectral investigation and thermal aspects

The coordination chain polymers of La(III), Ce(III), Pr(III), Nd(III) and Sm(III) with N,N’-di(o-thiophenyl)terephthalaldehydediimine have been prepared and characterized by elemental analysis, ¹H NMR, ¹³C NMR, magnetic measurements, infrared spectra, reflectance spectra and thermogravimetric analysis. A coordination number of seven around the metal ion is suggested. The thermal decompositions of the coordination polymers have been studied. The kinetic parameters have been calculated using Freeman-Carroll method. The thermodynamic activation parameters such as entropy (S*), preexponential factor (A), enthalpy (H*) and free energy of the decomposition (G*) have been evaluated.     

聚芳亚胺的合成、结构与性能

以不同的二碘化合物和芳香二胺为单体,通过两种不同的方法经缩聚反应得到了系列高分子量、低分布的聚芳亚胺。其结构由FT-IR, 1H NMR1和元素分析表征。由DSC和TG测定结果可知,该系聚合物具有较高的玻璃化转变温度(Tg＞150℃)和良好的热稳定性(TD＞400℃)。另外,该系聚合物还表现出良好的溶解性能。     

1,3-Adamantanyl dimethylsiloxane copolymers. Preparation and properties

1,3-bis(Dimethylhydroxysilyl)adamantane(I) has been prepared. Thermal condensation polymerization of this monomer yields poly-1,3-adamantyl-1,1,3,3-tetramethyldisiloxane. Condensation of I with bis(dimethylamino)dimethylsilane or 1,3-bis(dimethylamino)-1,1,3,3-tetramethyldisiloxane gave the expected 1,3-adamantyl dimethylsiloxane copolymers (II and III) respectively. These polymers have been characterized by ¹H,¹³C, and ²⁹SiNMR as well as GPC and TGA. They have unusually high thermal stability.