Quantum study on the branching ratio of the reaction NO2+OH

A reduced dimensionality (RD) approximation is developed for the title reaction which treats the angle of approach of the hydroxyl radical to the nitrogen dioxide molecule and the radial distance between the two species explicitly. All other degrees of freedom are treated adiabatically. Electronic structure calculations at the complete active space self-consistent field level are used to fit a potential energy surface (PES) in these two coordinates. Within this RD model the adiabatic capture centrifugal sudden approximation is used to calculate the high pressure limit rate constant. A correction for reflection from the PES due to rotationally nonadiabatic transitions is applied using the wave packet capture approximation. The branching ratio for the title reaction is calculated for the atmospherically significant temperature range of 200-400 K at 20 Torr without distinguishing between the conformers of HOONO. The result is k(HOONO)k(HNO(3) )=0.051 at 20 Torr and 300 K, which is in good agreement with the measured branching ratio between cis-cis-HOONO and nitric acid. This suggests that most of the different conformers of HOONO were converted to the most stable cis-cis conformer on the time scale of the measurements made.     

Product branching from the CH2CH2OH radical intermediate of the OH + ethene reaction

Using a crossed laser-molecular beam scattering apparatus and tunable photoionization detection, these experiments determine the branching to the product channels accessible from the 2-hydroxyethyl radical, the first radical intermediate in the addition reaction of OH with ethene. Photodissociation of 2-bromoethanol at 193 nm forms 2-hydroxyethyl radicals with a range of vibrational energies, which was characterized in our first study of this system ( J. Phys. Chem. A 2010 , 114 , 4934 ). In this second study, we measure the relative signal intensities of ethene (at m/e = 28), vinyl (at m/e = 27), ethenol (at m/e = 44), formaldehyde (at m/e = 30), and acetaldehyde (at m/e = 44) products and correct for the photoionization cross sections and kinematic factors to determine a 0.765:0.145:0.026:0.063:<0.01 branching to the OH + C(2)H(4), H(2)O + C(2)H(3), CH(2)CHOH + H, H(2)CO + CH(3), and CH(3)CHO + H product asymptotes. The detection of the H(2)O + vinyl product channel is surprising when starting from the CH(2)CH(2)OH radical adduct; prior studies had assumed that the H(2)O + vinyl products were solely from the direct abstraction channel in the bimolecular collision of OH and ethene. We suggest that these products may result from a frustrated dissociation of the CH(2)CH(2)OH radical to OH + ethene in which the C-O bond begins to stretch, but the leaving OH moiety abstracts an H atom to form H(2)O + vinyl. We compare our experimental branching ratio to that predicted from statistical microcanonical rate constants averaged over the vibrational energy distribution of our CH(2)CH(2)OH radicals. The comparison suggests that a statistical prediction using 1-D Eckart tunneling underestimates the rate constants for the branching to the product channels of OH + ethene, and that the mechanism for the branching to the H(2)O + vinyl channel is not adequately treated in such theories.     

Direct kinetics study of the temperature dependence of the CH2O branching channel for the CH3O2 + HO2 reaction

A direct kinetics study of the temperature dependence of the CH₂O branching channel for the CH₃O₂ + HO₂ reaction has been performed using the turbulent flow technique with high‐pressure chemical ionization mass spectrometry for the detection of reactants and products. The temperature dependence of the CH₂O‐producing channel rate constant was investigated between 298 and 218 K at a pressure of 100 Torr, and the data were fitted to the following Arrhenius expression: 1.6 × 10^?15 × exp[(1730 ± 130)/T] cm³ molecule^?1 s^?1. Using the Arrhenius expression for the overall rate of the CH₃O₂ + HO₂ reaction and this result, the 298 K branching ratio for the CH₂O producing channel is measured to be 0.11, and the branching ratio is calculated to increase to a value of 0.31 at 218 K, the lowest temperature accessed in this study. The results are compared to the analogous CH₃O₂ + CH₃O₂ reaction and the potential atmospheric ramifications of significant CH₂O production from the CH₃O₂ + HO₂ reaction are discussed. © 2001 John Wiley & Sons, Inc. Int J Chem Kinet 33: 363–376, 2001     

Quasiclassical trajectory study of the C(1D) + H2 reaction and isotopomeric variants: kinetic isotope effect and CD/CH branching ratio

The recently proposed ab initio single-sheeted double many-body expansion potential energy for the methylene molecule has been used to perform quasiclassical trajectory (QCT) calculations for the title reaction. Thermal and initial state-specific (v = 0, j = 0) rate constants for the C((1)D) + H(2)/HD/D(2) reactions have been obtained over a wide range of temperatures. Cross sections for the reaction C((1)D) + H(2) and its deuterated isotopes have also been calculated, as well as the CD/CH branching ratios for the C((1)D) + HD reaction. It is found that the CD + H product channel in the C((1)D) + HD reaction is preferred relative to the CH + D channel. The estimated rate constants are predicted to be in the order k(H2) > k(HD) > k(D2) and the calculated cross sections and rate constants compared with available theoretical and experimental data.     

Primary branching ratios for the low-temperature reaction of state-prepared N2+ with CH4, C2H2, and C2H4

Product branching ratios (BRs) are reported for ion-molecule reactions of state-prepared nitrogen cation (N(2)(+)) with methane (CH(4)), acetylene (C(2)H(2)). and ethylene (C(2)H(4)) at low temperature using a modified ion imaging apparatus. These reactions are performed in a supersonic nozzle expansion characterized by a rotational temperature of 40 ± 5K. For the N(2)(+) + CH(4) reaction, a BR of 0.83:0.17 is obtained for the dissociative charge-transfer (CT) reaction that gives rise to the formation of CH(3)(+) and CH(2)(+) product ions, respectively. The N(2)(+) + C(2)H(2) ion-molecule reaction proceeds through a nondissociative CT process that results in the sole formation of C(2)H(2)(+) product ions. The reaction of N(2)(+) with C(2)H(4) leads to the formation of C(2)H(3)(+) and C(2)H(2)(+) product ions with a BR of 0.74:0.26, respectively. The reported BR for the N(2)(+) + C(2)H(4) reaction is supportive of a nonresonant dissociative CT mechanism similar to the one that accompanies the N(2)(+) + CH(4) reaction. No dependence of the branching ratios on N(2)(+) rotational level was observed. In addition to providing direct insight into the dynamics of the state-prepared N(2)(+) ion-molecule reactions with the target neutral hydrocarbon molecules, the reported low-temperature BRs are also important for accurate modeling of the nitrogen-dominated upper atmosphere of Saturn's moon, Titan.     

Ab initio study of the spectroscopy of CH3N and CH3CH2N

Complete active space (CAS) calculations with 6-311++g(3df,3pd) basis sets were performed for a large number of electronic states of the nitrate free radical (CH3N/CH3CH2N) and their positive and negative ions. All calculated states are valence states, and their characters are discussed in detail. To investigate the Jahn-Teller effect on the CH3N radical, Cs symmetry was used for both CH3N and CH3CH2N in calculations. The results (CASPT2 adiabatic excitation energies and CASSI oscillator strengths) suggest that the calculated transitions of CH3N at 32172 and 32139 cm(-1) are attributed to the 2(3)A' ' --> 1(3)A' ' and 1(3)A' --> 1(3)A' ', respectively, which is in accordance with the A3E --> X3A2 emission spectrum at T0 = 31 817 cm(-1). The calculated transitions of CH3CH2N at 334 nm are attributed to the 1(3)A' ' --> 2(3)A' ' and 1(3)A' ' --> 1(3)A', respectively, which is in accordance with the UV absorption spectrum of a series of 11 bands beginning at 335 nm. The vertical and adiabatic ionization energies were obtained to compare with the PES data. These results are in agreement with previous experimental data, which is discussed in detail.     

A shock tube study of the CH2O + NO2 reaction at high temperatures

The reaction of CH₂O with NO₂ has been studied with a shock tube equipped with two stabilized ew CO lasers. The production of CO, NO, and H₂O has been monitored with the CO lasers in the temperature range of 1140–1650 K using three different Ar-diluted CH₂O-NO₂ mixtures. Kinetic modeling and sensitivity analysis of the observed CO, NO, and H₂O production profiles over the entire range of reaction conditions employed indicate that the bimolecular metathetical reaction, NO₂ + CH₂O → HONO + CHO (1) affects most strongly the yields of these products. Combination of the kinetically modeled values of ??₁ with those obtained recently from a low temperature pyrolytic study, ref. [8], leads to for the broad temperature range of 300–2000 K.     

Bimolecular rate constant and product branching ratio measurements for the reaction of C2H with ethene and propene at 79 K

The reactions of the ethynyl radical (C(2)H) with ethene (C(2)H(4)) and propene (C(3)H(6)) are studied under low temperature conditions (79 K) in a pulsed Laval nozzle apparatus. Ethynyl radicals are formed by 193 nm photolysis of acetylene (C(2)H(2)) and the reactions are studied in nitrogen as a carrier gas. Reaction products are sampled and subsequently photoionized by the tunable vacuum ultraviolet radiation of the Advanced Light Source (ALS) at Lawrence Berkeley National Laboratory. The product ions are detected mass selectively and time-resolved by a quadrupole mass spectrometer. Bimolecular rate coefficients are determined under pseudo-first-order conditions, yielding values in good agreement with previous measurements. Photoionization spectra are measured by scanning the ALS photon energy while detecting the ionized reaction products. Analysis of the photoionization spectra yields-for the first time-low temperature isomer resolved product branching ratios. The reaction between C(2)H and ethene is found to proceed by H-loss and yields 100% vinylacetylene. The reaction between C(2)H and propene results in (85 ± 10)% C(4)H(4) (m/z = 52) via CH(3)-loss and (15 ± 10)% C(5)H(6) (m/z = 66) by H-loss. The C(4)H(4) channel is found to consist of 100% vinylacetylene. For the C(5)H(6) channel, analysis of the photoionization spectrum reveals that (62 ± 16)% is in the form of 4-penten-1-yne, (27 ± 8)% is in the form of cis- and trans-3-penten-1-yne and (11 ± 10)% is in the form of 2-methyl-1-buten-3-yne.     

Low-temperature branching ratios for the reaction of state-prepared N2(+) with acetonitrile

In this work, the primary product branching ratio (BR) for the reaction of state-prepared nitrogen cation (N(2)(+)) with acetonitrile (CH(3)CN), a possible minor constituent of Titan's upper atmosphere, is reported. The ion-molecule reaction occurs in the collision region of the supersonic nozzle expansion that is characterized by a rotational temperature of 45 ± 5 K. A BR of 0.86 ± 0.01/0.14 ± 0.01 is obtained for the formation CH(2)CN(+) and the CH(3)CN(+) product ions, respectively. The reported BR overwhelmingly favors the formation of CH(2)CN(+) product channel and is consistent with a simple capture process that is accompanied by a nonresonant dissociative charge transfer reaction. The BRs are independent of the N(2) rotational levels excited. Apart from providing insights onto the dynamics of the title ion-molecule reaction, the reported BR represents the most accurate available low-temperature experimental measurement for the reaction useful to aid in the accurate modeling of Titan's nitrile chemistry.     

Kinetics and product branching ratios of the reaction of (1)CH2 with H2 and D2

The reactions of singlet methylene (a(1)A1 (1)CH2) with hydrogen and deuterium have been studied by experimental and theoretical techniques. The rate coefficients for the removal of singlet methylene with H2 (k1) and D2 (k2) have been measured from 195 to 798 K and are essentially temperature-independent with values of k1 = (10.48 +/- 0.32) x 10(-11) cm(3) molecule(-1) s(-1) and k2 = (5.98 +/- 0.34) x 10(-11) cm(3) molecule(-1) s(-1), where the errors represent 2sigma, giving a ratio of k1/k2 = 1.75 +/- 0.11. In the reaction with H2, singlet methylene can be removed by reaction giving CH3 + H or deactivated to ground-state triplet methylene. Direct measurement of the H atom product showed that the fraction of relaxation decreased from 0.3 at 195 K to essentially zero at 398 K. For the reaction with deuterium, either H or D may be eliminated. Experimentally, the H:D ratio was determined to be 1.8 +/- 0.5 over the range 195-398 K. Theoretically, the reaction kinetics has been predicted with variable reaction coordinate transition state theory and with rigid-body trajectory simulations employing various high-level, ab initio-determined potential energy surfaces. The magnitudes of the calculated rate coefficients are in agreement with experiment, but the calculations show a significant negative temperature dependence that is not observed in the experimental results. The calculated and experimental H to D ratios from the reaction of singlet methylene with D2 are in good agreement, suggesting that the reaction proceeds entirely through the formation of a long-lived methane intermediate with a statistical distribution of energy.     

Methanol oxidation in a flow reactor: Implications for the branching ratio of the CH3OH+OH reaction

The oxidation of methanol in a flow reactor has been studied experimentally under diluted, fuel-lean conditions at 650–1350 K, over a wide range of O₂ concentrations (1%–16%), and with and without the presence of nitric oxide. The reaction is initiated above 900 K, with the oxidation rate decreasing slightly with the increasing O₂ concentration. Addition of NO results in a mutually promoted oxidation of CH₃OH and NO in the 750–1100 K range. The experimental results are interpreted in terms of a revised chemical kinetic model. Owing to the high sensitivity of the mutual sensitization of CH₃OH and NO oxidation to the partitioning of CH₃O and CH₂OH, the CH₃OH + OH branching fraction could be estimated as α = 0.10 ± 0.05 at 990 K. Combined with low-temperature measurements, this value implies a branching fraction that is largely independent of temperature. It is in good agreement with recent theoretical estimates, but considerably lower than values employed in previous modeling studies. Modeling predictions with the present chemical kinetic model is in quantitative agreement with experimental results below 1100 K, but at higher temperatures and high O₂ concentration the model underpredicts the oxidation rate. © 2008 Wiley Periodicals, Inc. Int J Chem Kinet 40: 423–441, 2008     

Shock tube investigation of CH3 + CH3OCH3

The title reaction has been investigated in a diaphragmless shock tube by laser schlieren densitometry over the temperature range 1163-1629 K and pressures of 60, 120, and 240 Torr. Methyl radicals were produced by dissociation of 2,3-butanedione in the presence of an excess of dimethyl ether. Rate coefficients for CH(3) + CH(3)OCH(3) were obtained from simulations of the experimental data yielding the following expression which is valid over the range 1100-1700 K: k = (10.19 ± 3.0)T(3.78)?exp((-4878/T)) cm(3) mol(-1)s(-1). The experimental results are in good agreement with estimates by Curran and co-workers [Fischer, S. L.; Dryer, F. L.; Curran, H. J. Int. J. Chem. Kinet.2000, 32 (12), 713-740. Curran, H. J.; Fischer, S. L.; Dryer, F. L. Int. J. Chem. Kinet.2000, 32 (12), 741-759] but about a factor of 2.6 lower than those of Zhao et al. [Zhao, Z.; Chaos, M.; Kazakov, A.; Dryer, F. L. Int. J. Chem. Kinet.2008, 40 (1), 1-18].     

Ab initio study of the potential energy surface and product branching ratios for the reaction of O(1D) with CH3CH2Br

The potential energy surface of O(¹D) + CH₃CH₂Br reaction has been studied using QCISD(T)/6‐311++G(d,p)//MP2/6‐311G(d,p) method. The calculations reveal an insertion‐elimination reaction mechanism of the title reaction. The insertion process has two possibilities: one is the O(¹D) inserting into C? Br bond of CH₃CH₂Br producing one energy‐rich intermediate CH₃CH₂OBr and another is the O(¹D) inserting into one of the C? H bonds of CH₃CH₂Br producing two energy‐rich intermediates, IM1 and IM2. The three intermediates subsequently decompose to various products. The calculations of the branching ratios of various products formed though the three intermediates have been carried out using RRKM theory at the collision energies of 0, 5, 10, 15, 20, 25, and 30 kcal/mol. CH₃CH₂O + Br are the main decomposition products of CH₃CH₂OBr. CH₃COH + HBr and CH₂CHOH + HBr are the main decomposition products for IM1; CH₂CHOH + HBr are the main decomposition products for IM2. As IM1 is more stable and more likely to form than CH₃CH₂OBr and IM2, CH₃COH + HBr and CH₂CHOH + HBr are probably the main products of the O(¹D) + CH₃CH₂Br reaction. Our computational results can give insight into reaction mechanism and provide probable explanations for future experiments. © 2009 Wiley Periodicals, Inc. Int J Quantum Chem, 2011     

Kinetic study of the reaction of OH with CH2I2

Flash photolysis (FP) coupled to resonance fluorescence (RF) was used to measure the absolute rate coefficients (k(1)) for the reaction of OH(X(2)Π) radicals with diiodomethane (CH(2)I(2)) over the temperature range 295-374 K. The experiments involved time-resolved RF detection of the OH (A(2)Σ(+)→X(2)Π transition at λ = 308 nm) following FP of the H(2)O/CH(2)I(2)/He mixtures. The OH(X(2)Π) radicals were produced by FP of H(2)O in the vacuum-UV at wavelengths λ > 120 nm. Decays of OH radicals in the presence of CH(2)I(2) are observed to be exponential, and the decay rates are found to be linearly dependent on the CH(2)I(2) concentration. The results are described by the Arrhenius expression k(1)(T) = (4.2 ± 0.5) × 10(-11) exp[-(670 ± 20)K/T] cm(3) molecule(-1) s(-1). The implications of the reported kinetic results for understanding the atmospheric chemistry of CH(2)I(2) are discussed.     

Rate constants and branching ratios for the reaction of CH radicals with NH3: a combined experimental and theoretical study

The reaction between CH radicals and NH(3) molecules is known to be rapid down to at least 23 K {at which temperature k = (2.21 ± 0.17) × 10(-10) cm(3) molecule(-1) s(-1): Bocherel ; et al. J. Phys. Chem. 1996, 100, 3063}. However, there have been only limited theoretical investigations of this reaction and its products are not known. This paper reports (i) ab initio quantum chemical calculations on the energy paths that lead to various reaction products, (ii) calculations of the overall rate constant and branching ratios to different products using transition state and master equation methods, and (iii) an experimental determination of the H atom yield from the reaction. The ab initio calculations show that reaction occurs predominantly via the initial formation of a datively bound HC-NH(3) complex and reveal low energy pathways to three sets of reaction products: H(2)CNH + H, HCNH(2) + H, and CH(3) + NH. The transition state calculations indicate the roles of "outer" and "inner" transition states and yield rate constants between 20 and 320 K that are in moderate agreement with the experimental values. These calculations and those using the master equation approach show that the branching ratio for the most exothermic reaction, to H(2)CNH + H, is ca. 96% throughout the temperature range covered by the calculations, with those to HCNH(2) + H and CH(3) + NH being (4 ± 3)% and <0.3%, respectively. In the experiments, multiple photon dissociation of CHBr(3) was used to generate CH radicals and laser-induced fluorescence at 121.56 nm (VUV-LIF) was employed to observe H atoms. By comparing signals from CH + NH(3) with those from CH + CH(4), where the yield of H atoms is known to be unity, it is possible to estimate that the yield of H atoms from CH + NH(3) is equal to 0.89 ± 0.07 (2σ), in satisfactory agreement with the theoretical estimate.     

Absolute rate coefficient determination and reaction mechanism investigation for the reaction of Cl atoms with CH2I2 and the oxidation mechanism of CH2I radicals

The gas-phase reaction of atomic chlorine with diiodomethane was studied over the temperature range 273-363 K with the very low-pressure reactor (VLPR) technique. The reaction takes place in a Knudsen reactor at pressures below 3 mTorr, where the steady-state concentration of both reactants and stable products is continuously measured by electron-impact mass spectrometry. The absolute rate coefficient as a function of temperature was given by k = (4.70 +/- 0.65) x 10-11 exp[-(241 +/- 33)/T] cm3molecule-1s-1, in the low-pressure regime. The quoted uncertainties are given at a 95% level of confidence (2sigma) and include systematic errors. The reaction occurs via two pathways: the abstraction of a hydrogen atom leading to HCl and the abstraction of an iodine atom leading to ICl. The HCl yield was measured to be ca. 55 +/- 10%. The results suggest that the reaction proceeds via the intermediate CH2I2-Cl adduct formation, with a I-Cl bond strength of 51.9 +/- 15 kJ mol-1, calculated at the B3P86/aug-cc-pVTZ-PP level of theory. Furthermore, the oxidation reactions of CHI2 and CH2I radicals were studied by introducing an excess of molecular oxygen in the Knudsen reactor. HCHO and HCOOH were the primary oxidation products indicating that the reactions with O2 proceed via the intermediate peroxy radical formation and the subsequent elimination of either IO radical or I atom. HCHO and HCOOH were also detected by FT-IR, as the reaction products of photolytically generated CH2I radicals with O2 in a static cell, which supports the proposed oxidation mechanism. Since the photolysis of CH2I2 is about 3 orders of magnitude faster than its reactive loss by Cl atoms, the title reaction does not constitute an important tropospheric sink for CH2I2.     

A shock tube study of the reactions of CH with CO2 and O2

The formation and consumption of CH radicals during shock-induced pyrolysis of a few ppm ethane diluted in argon was measured by a ring-dye laser spectrometer. Absorption-over-time profiles, measured at a resonance line in the Q-branch of the A²Δ − X²Π band of CH at λ = 431.1311 nm, were recorded and transformed into CH concentrations by known absorption coefficients. By adding some hundred ppm of CO₂ or O₂ to the initial mixtures, the CH concentration profiles were significantly perturbed. Both the perturbed and unperturbed CH concentration profiles have been compared with calculations based on a reaction kinetic model. A sensitivity analysis revealed that the perturbation process was dominated by direct reactions of CH with the added molecules. By fitting calculated to observed CH profiles the following rate coefficients were obtained The experiments were performed in the temperature range between 2500 K and 3500 K. © 1996 John Wiley & Sons, Inc.     

CH2与HNCO反应机理的量子化学研究

异氰酸(HNCO)分解引发的一系列自由基反应是氮氧化物快速消除机理所研究的领域,由于该反应在燃烧化学中讨论氮氧化物NOx的消除过程十分重要,所以获得这些反应准确的位垒就成为实验化学和理论化学所要解决的问题,本文采用量子化学方法,研究了CH2与HNCO体系的反应机理,力求从理论角度给出合理的解释。     

Ab initio study of the ClO + NH2 reaction: prediction of the total rate constant and product branching ratios

The mechanism for ClO + NH2 has been investigated by ab initio molecular orbital and transition-state theory calculations. The species involved have been optimized at the B3LYP/6-311+G(3df,2p) level and their energies have been refined by single-point calculations with the modified Gaussian-2 method, G2M(CC2). Ten stable isomers have been located and a detailed potential energy diagram is provided. The rate constants and branching ratios for the low-lying energy channel products including HCl + HNO, Cl + NH2O, and HOCl + 3NH (X(3)Sigma(-)) are calculated. The result shows that formation of HCl + HNO is dominant below 1000 K; over 1000 K, Cl + NH2O products become dominant. However, the formation of HOCl + 3NH (X(3)Sigma(-)) is unimportant below 1500 K. The pressure-independent individual and total rate constants can be expressed as k1(HCl + HNO) = 4.7 x 10(-8)(T(-1.08)) exp(-129/T), k(2)(Cl + NH2O) = 1.7 x 10(-9)(T(-0.62)) exp(-24/T), k3(HOCl + NH) = 4.8 x 10(-29)(T5.11) exp(-1035/T), and k(total) = 5.0 x 10(-9)(T(-0.67)) exp(-1.2/T), respectively, with units of cm(3) molecule(-1) s(-1), in the temperature range of 200-2500 K.     

Ab initio, density functional theory, and continuum solvation model prediction of the product ratio in the S(N)2 reaction of NO2(-) with CH3CH2Cl and CH3CH2Br in DMSO solution

The reaction pathways for the interaction of the nitrite ion with ethyl chloride and ethyl bromide in DMSO solution were investigated at the ab initio level of theory, and the solvent effect was included through the polarizable continuum model. The performance of BLYP, GLYP, XLYP, OLYP, PBE0, B3PW91, B3LYP, and X3LYP density functionals has been tested. For the ethyl bromide case, our best ab initio calculations at the CCSD(T)/aug-cc-pVTZ level predicts product ratio of 73% and 27% for nitroethane and ethyl nitrite, respectively, which can be compared with the experimental values of 67% and 33%. This translates to an error in the relative DeltaG* of only 0.17 kcal mol(-1). No functional is accurate (deviation <0.5 kcal mol(-1)) for predicting relative DeltaG*. The hybrid X3LYP functional presents the best performance with deviation 0.82 kcal mol(-1). The present problem should be included in the test set used for the evaluation of new functionals.