Formation and thermal stability of selenites and hydrogen selenites of samarium

The solubility isotherm of the Sm₂O₃-SeO₂-H₂O system was studied at 100°C. The two compounds obtained in the three-component system were identified by the Schreinemakers method as well as by chemical, thermoanalytical and X-ray diffraction analyses after their isolation in pure state.     

Kinetic parameters of decomposition of some selenites

Studying the kinetics of isothermal decomposition of thirteen selenites at isothermal heating, the values of activation energy E of the process, pre-exponential factor A in Arrhenius equation and changes of entropy for the formation of the activated complex of the reagent were calculated. Direct dependence between the thermal stability of the selenites and their cation radii on their 'hardness' or 'softness' was found. The dependence was interpreted in the terms of the generalized perturbation theory of chemical reactivity. Kinetic compensation effect was observed only for the selenites, which thermally decompose by the same mechanism.     

A study of the selenites of cerium

The solubilities of the systems CeO₂-SeO₂-H₂O and Ce₂O₃-SeO₂-H₂O were studied at 100°C. The field of crystallization of Ce(SeO₃)₂ was established in the system CeO₂-SeO₂-H₂O, and fields of crystallization of Ce₂(SeO₃)₃ and Ce₂(SeO₃)₃H₂SeO₃ were established in the system Ce₂O₃-SeO₂-H₂O. The compound obtained were identified by means of chemical, X-ray and derivatograph analysis. The mechanism of thermal dissociation of Ce(SeO₃)₂, Ce₂(SeO₃)₃ and Ce₂(SeO₃)₃·H₂SeO₃ was studied. This revised version was published online in August 2006 with corrections to the Cover Date.     

Thermal Decomposition Studies of Mixed Rare Earth Hydrogen Selenite Crystals

Mixed rare earth hydrogen selenite crystals, neodymium praseodymium hydrogen selenite (Nd_xPr_1−x(HSeO₃)(SeO₃)⋅2H₂O), Neodymium samarium hydrogen selenite (Nd_xSm_1−x(HSeO₃)(SeO₃)⋅2H₂O) and praseodymium samarium hydrogen selenite (Pr_xSm_1−x(HSeO₃)(SeO₃)⋅2H₂O) were prepared by gel diffusion technique. Simultaneous thermogravimetric and differential thermal analysis were carried out on the grown crystals. Decomposition is observed to occurs in six steps, which gives the evidence of successive losses of H₂O and SeO₂. The final product due to decomposition is a mixed rare earth oxides. FT-IR spectrum of the crystal samples heated at different temperatures complemented to the TG-DTA results. This revised version was published online in July 2006 with corrections to the Cover Date.     

Thermal decomposition of 4,4′-dipyridyl complexes of light rare-earth thiocyanates in air atmosphere

The thermal decompositions of Ln(NCS)₃(4-dipy)₂·5H₂O were studied, whereLn=La, Pr, Nd, Sm, Eu and Y, and 4-dipy=4,4′-dipyridyl. The compounds are first dehydrated. During the thermal decomposition of Ln(NCS)₃(4-dipy)₂, deamination takes place. The transient products decompose with the formation of Ln₂O₂SO₄. The energies of activation for the first step of dehydration of the La, Pr, Nd, Sm and Eu complexes were determined.

---

Zusammenfassung Es wurde die thermische Zersetzung von Ln(NCS)₃(4-dipy)₂.5H₂O mitLn=La, Pr, Nd, Sm, Eu, Y und 4-dipy=4,4′-Dipyridyl untersucht. Die Verbindungen werden zuerst dehydratiert. Bei der thermischen Zersetzung von Ln(NCS)₃(4-dipy)₂ findet eine Desaminierung statt. Die übergangsprodukte zersetzen sich unter Bildung von Ln₂O₂SO₄. Die Aktivierungsenergie für den ersten Schritt der Dehydratation der La-, Pr-, Nd-, Sm- und Eu-Komplexe wurde ermittelt.

     

Thermal decomposition of rare-earth trioxalatocobaltates

The thermal decomposition of rare-earth trioxalatocobaltates LnCo(C₂O₄)₃ · x H₂O, where Ln  La, Pr, Nd, has been studied in flowing atmospheres of air/oxygen, argon/ nitrogen, carbon dioxide and a vacuum. The compounds decompose through three major steps, viz. dehydration, decomposition of the oxalate to an intermediate carbonate, which further decomposes to yield rare-earth cobaltite as the final product. The formation of the final product is influenced by the surrounding gas atmosphere. Studies on the thermal decomposition of photodecomposed lanthanum trioxalatocobaltate and a mechanical mixture of lanthanum oxalate and cobalt oxalate in 1 : 2 molar ratio reveal that the decomposition behaviour of the two samples is different. The drawbacks of the decomposition scheme proposed earlier have been pointed out, and logical schemes based on results obtained by TG, DTA, DTG, supplemented by various physico-chemical techniques such as gas and chemical analyses, IR and mass spectroscopy, surface area and magnetic susceptibility measurements and X-ray powder diffraction methods, have been proposed for the decomposition in air of rare-earth trioxalatocobaltates as well as for the photoreduced lanthanum salt and a mechanical mixture of lanthanum and cobalt oxalates.     

Physicochemical study on selenites of the three-component system Yb2O3-SeO2-H2O

The solubility isotherm of the three-component system Yb₂O₃-SeO₂-H₂O at 100°C was studied. There are two fields of crystallization in the solubility diagram at this temperature - a small one of Yb₂(SeO₃)₃·4H₂O and a large one of YbH(SeO₃)₂·2H₂O. These compounds were identified by the Schreinemakers' method, and by chemical and X-ray analyses as well. Simultaneous TG and DTA curves of the two compounds obtained were made and the mechanism of the thermal decomposition was described. This revised version was published online in July 2006 with corrections to the Cover Date.     

Thermal decomposition of some linear trinuclear schiff base complexes with acetate bridges

Ni(II)–M(II)–Ni(II) nuclear structured complexes were prepared from N,N’-bis(salicylidene)-1,3-propanediamine (LH2) and its derivatives N,N’-bis(salicylidene)-2,2’-dimethyl-1,3-propanediamine (LDMH₂) and N,N’-bis(salicylidene)-2-hydroxy-1,3-propanediamine (LOH3), where M represents one of the following metal ions; Mn(II), Co(II), Ni(II), Cu(II), Zn(II), Cd(II). Two different μ-bridges are found between the metal nucleus of the complexes. The phenolic oxygens and acetate ions tend to form μ-bridges between the terminal Ni(II) ions and central metal(II) ion. The coordinatively bonded DMF molecules, in the complexes, were observed to abandon the structure between 160–180°C. Further heating resulted primarily in the thermal decomposition of the complexes above 310°C, whereas metal oxide residue mixtures were observed above 650°C.     

Thermal analysis of the selenites of the ternary system Nd2O3-SeO2-H2O AT 100°C

The solubility isotherm of the system Nd₂O₃-SeO₂-H₂O at 100°C was studied and drawn. All possible selenites of neodymium were obtained and characterized. Thermal decomposition of all phases in the system was studied and its mechanism was described. This revised version was published online in August 2006 with corrections to the Cover Date.     

Thermal behaviour of mixed Sn and Ge phosphates

Pure and mixed Ge and Sn hydrogenphosphates, prepared either by refluxing in 8M H₃PO₄ or by hydrothermal treatment at 180° or 300°C, have been characterized in terms of chemical composition and thermal behaviour and also tested as catalysts in the 1-butene isomerization, in order to correlate acidic properties with preparation method. Solid solutions for every composition in this system are formed only when using the refluxing method, as proved by X-ray and TG-DTA data. The hydrothermal treatments are strongly influenced by the hydrolysability of the Ge phosphate: in almost all the samples, where Ge was present, GeOHPO₄ was identified on TG-DTA curves by the endothermic H₂O weight loss at 700°–800°C. The acidic properties of the various materials decrease as GeOHPO₄ content increases.     

Thermal decomposition features of calcium and rare-earth oxalates

Thermal decomposition of Ln₂(C₂O₄)₃ · 9H₂O concentrate (Ln = La, Ce, Pr, Nd) in the presence of CaC₂O₄ · H₂O was studied by X-ray diffraction, thermogravimetry, and chemical analysis. Annealing at temperatures above 374°C in the absence of calcium oxalate gives rise to the solid solution of CeO₂-based rare-earth oxides. Calcite CaCO₃ is formed in the presence of calcium oxalate at annealing temperatures above 442°C, which impedes the formation of lanthanide oxide solid solution and favors crystallization of oxides as individual La₂O₃, CeO₂, Pr₆O₁₁, and Nd₂O₃ phases. An increase in temperature above 736°C is accompanied by decomposition of calcium carbonate to give rise to an individual CaO phase and an individual phase of CeO₂-based lanthanide oxide solid solution.     

Thermal decomposition of 2,2′-dipyridyl and 4,4′-dipyridyl complexes with rare-earth elements in air atmosphere

The present work provides data concerning thermal decomposition of 2,2′-dipyridyl(2-dipy) and 4,4′-dipyridyl(4-dipy) with rare-earth elements (Ln) based on literature and our own sustained studies which comprised about 100 complexes.

---

Zusammenfassung Ausgehend von Literaturangaben und unseren eigenen Untersuchungen von mehr als 100 Komplexen liefert vorliegende Arbeit Angaben zur thermischen Zersetzung von 2,2′-Dipyridyl(2-dipy) und 4,4′-Dipyridyl(4-dipy) mit Seltenerdenelementen (Ln).

     

Syntheses, crystal structures and photoluminescence properties of three novel organically bonded indium selenates or selenites

Three new organically bonded indium(III) selenates or selenites, namely, In₂(2,2′-bipy)₂(SeO₄)₃(H₂O)₂·2H₂O (1), In₂(2,2′-bipy)₂(SeO₄)(C₂O₄)₂·0.5H₂O (2) and In₂(2,2′-bipy)₂(SeO₃)₂(C₂O₄) (3) (2,2′-bipy=2,2′-bipyridine) have been synthesized by hydro/solvothermal reactions by using the in situ ligand synthesis technique (2 and 3) and structurally characterized. The structure of compound 1 features a dimer composed of two InO₄N₂ octahedra bridged by three SeO₄ tetrahedra via cornering sharing. The structure of compound 2 shows a 2D inorganic-organic hybrid layer in which the indium (III) ions are bridged by both selenate and oxalate anions, whereas the structure of compound 3 possesses a 2D inorganic-organic hybrid layer composed of the indium (III) ions interconnected by both selenite and oxalate anions. The adjacent layers are further interconnected via π…π interactions between the bipy ligands. Compound 1 displays an intra-ligand luminescent emission band at λ_max=360 nm whereas compounds 2 and 3 both exhibit intra-ligand luminescent emission bands at λ_max=389 nm.     

Phase States of Europium Selenites in Aqueous Medium and in Thermal Analysis

The solubility isotherm of the system Eu₂O₃-SeO₂-H₂O was studied at 100°C. Certain amounts of the obtained selenites (normal and acid) were subjected to thermal analysis. The intermediate phases were isolated and chemical and X-ray phase analysis was made. The scheme of thermal decomposition was determined. This revised version was published online in August 2006 with corrections to the Cover Date.     

Thermal decomposition of cadmium peroxotitanate to CdTiO3

TG, DTA and DSC curves of Cd₂[Ti₂(O₂)₂O(OH)₆]·H₂O were recorded and used to determine the isothermal conditions suitable for obtaining the intermediate samples corresponding to the phases observed during the thermal decomposition. The samples were identified by quantitative analysis, IR spectroscopy and X-ray analysis. The experimental results were used to propose a mechanism of thermal decomposition of the investigated compound to CdTiO₃. The optimum conditions were also determined for obtaining CdTiO₃ with well-defined crystallinity.     

Syntheses, structural studies, and magnetic properties of divalent Cu and Co selenites with organic constituents

Six new divalent metal selenites have been synthesized by hydro-/solvothermal methods which leads to the incorporation of the organic template as a cation or a ligand. The structure of [H(2)pip][Cu(SeO(3))(2)] (1) (pip=piperazine) features 1D anionic chains of [Cu(SeO(3))(2)](2-) which are cross-linked by the template cations through hydrogen bonds into a 2D layer. In [Cu(C(3)H(4)N(2))(SeO(3))] (2) the organic template is coordinated to the copper(II) ion of the inorganic Cu(SeO(3)) layer. The isostructural compounds [H(2)en][M(HSeO(3))(2)Cl(2)] (en=ethylenediamine; M=Cu (3), Co (4)) contain layers of [MCl(2)(HSeO(3))(2)](2-) units (M=Cu, Co), which are cross-linked by the template cations via hydrogen bonds into a 3D network. The structure of [H(2)en][Cu(2)(SeO(3))(2)(HSeO(3))](2)H(2)O (5), consists of a pillared layered architecture in which the Cu(SeO(3)) layers are further interconnected by bridging hydrogen selenite groups (the pillar). The compound [H(2)pip][Cu(2)(Se(2)O(5))(3)] (6), which crystallizes as a 3D open framework represents the first organically templated metal diselenite. These new compounds are thermally stable up to at least 170 degrees C. All of the compounds exhibit fairly strong antiferromagnetic interactions. More interestingly, compounds 3 and 4 behave as a weak ferromagnets below the critical temperatures of T(c)=12 and 8 K, respectively, and both of them exhibit spin-flop phase transitions around 800+/-100 Oe.     

Thermal decomposition behavior of precursors for yttrium aluminum garnet

Precursor powders for yttrium aluminum garnet (YAG) were synthesized by solution combustion reactions (nitrate–glycine reaction with stoichiometric and sub-stoichiometric amount of fuel) and simple decomposition of nitrate solution. The TG-DTA, FTIR and XRD analyses of the precursors and the typical heat-treated samples were carried out to understand the processes occurring at various stages during heating to obtain phase pure YAG. Precursors from all the reactions exhibited dehydration of adsorbed moisture in the temperature range of 30 to 300°C. The precursor from nitrate–glycine reaction with stoichiometric amount of fuel (precursor- A) contained entrapped oxides of carbon (CO and CO₂) and a carbonaceous contaminant. It exhibited burning away of the carbonaceous contaminant and crystallization to pure YAG accompanied by loss of oxides of carbon in the temperature ranges of 400 to 600 and 880 to 1050°C. The precursor from simple decomposition of nitrates (precursor-B) exhibited denitration cum dehydroxylation and crystallization in the temperature ranges of 300 to 600 and 850 to 1050°C. The precursor from nitrate–glycine reaction with sub-stoichiometric amount of fuel (precursor-C) contained entrapped carbon dioxide and exhibited its release during crystallization in the temperature range of 850 to 1050°C. This study established that, in case of metal nitrate–glycine combustion reactions, crystalline YAG formation occurs from an amorphous compound with entrapped oxides of carbon. In case of simple decomposition of metal nitrates, formation of crystalline YAG occurs from an amorphous oxide intermediate.     

Synthesis and spectral characteristics of cyclohexylmethoxy-substituted phthalocyanines of rare-earth elements

New symmetrical metal complexes of the rare-earth element phthalocyanines were synthesized by the reaction of 4,5-bis(cyclohexylmethoxy)phthalonitrile, obtained for the first time, with the rare-earth element salts, as well as starting from the corresponding free phthalocyanine. A correlation between method of the synthesis and the reaction product compositions was studied. Structures of the complexes obtained were confirmed by mass spectrometry, X-ray crystallography, and electronic absorption spectroscopy. All the metal complexes are well soluble in organic solvents. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2343–2349, December, 2007.