电堆积与等速电泳结合的毛细管电泳进样富集方法的研究

 提出电堆积与等速电泳结合的毛细管电泳进样富集方法 ,并对电堆积和等速电泳进样富集的最佳条件进行了研究。在 15kV电压 ,电堆积进样 70s和等速电泳富集 40s条件下 ,对两种结构相近的药物普萘洛尔和美托洛尔用毛细管区带电泳法进行了分离。pH 4.0 ,30mmol/L醋酸钠 醋酸、30mmol/Lβ 丙氨酸 醋酸和 1.5 mmol/L醋酸钠 醋酸溶液分别作背景 (或前导 )、尾随和样品缓冲液。与常规电迁移进样方法比较 ,信号增强因子约为 2 5 0和16 0 ;总分析时间与常规法相近。     

肌肽类生物活性肽的毛细管电泳在线富集技术

建立了毛细管区带电泳(CZE)在线富集3种肌肽类活性肽(肌肽、鹅肌肽和高肌肽)的两种简便有效的方法。一种是大体积进样反向压力排除基体富集（LVSRP）技术,即通过流体动力学进样,在不改变电源极性的条件下,利用反向压力排除样品基体,电堆积富集后进行CZE分离;另一种是大体积进样电渗流排除基体富集（LVSEP）技术,即通过流体动力学进样,于运行缓冲液中加入溴化十六烷基三甲基铵(CTAB)动态修饰毛细管表面,通过电渗流排除样品基体,改变电源极性后进行CZE分离。与常规CZE相比,LVSRP技术和LVSEP技术使检测灵敏度提高了40~60倍。对影响两种富集过程的一些因素进行了研究,在最优富集条件下考察本方法的线性范围为0.080~5.0 μmol/L。对3种生物活性肽的检测限(S/N=3)分别为LVSRP 41~58 nmol/L,LVSEP 35~43 nmol/L。     

毛细管电泳大体积进样在柱复合富集技术

提出场放大进样和酸堆积结合的大体积样品复合富集方法,实现了毛细管电泳对高盐样品中阳离 子的有效富集和分离。向样液中添加70%(V/V)乙腈,场放大进样600s后,电动注入强酸做酸堆积,预富集 样品带用毛细管区带电泳分离仍能获得满意的分离度。此法的富集倍数约为常规电动进样的800倍。普萘 洛尔和美托洛尔的检出限分别达到1×10-4mg/L和7×10-4mg/L     

基于场放大进样及Au纳米粒子双重富集用于大肠杆菌检测的毛细管电泳电化学免疫分析法

利用Au纳米粒子作为辣根过氧化物酶(HRP)标记抗体的载体,结合电堆积预富集技术,发展了一种基于场放大进样及Au纳米粒子双重富集的毛细管电泳电化学免疫分析技术用于大肠杆菌的检测.大肠杆菌与酶标抗体免疫反应后直接进行场放大进样预富集,免疫样品快速迁移并堆积在毛细管入口端,同时带负电荷的金纳米粒子向阳极端迁移,在样品与缓冲溶液的界面处吸附样品离子.金纳米粒子作为多酶载体使检测信号进一步放大.以标记在抗体上的HRP催化H2O2氧化邻苯二胺产生的电流信号来检测大肠杆菌.同常规电动进样毛细管电泳相比,该双重富集技术可使灵敏度提高1400倍.该方法对大肠杆菌检测的线性范围为2.0～2000.0 cfu mL-1,检出限为1.0 cfu mL-1,实现了对扇贝样品中大肠杆菌的快速、灵敏检测.     

毛细管筛分电泳中电动超荷电结合预填充水塞在线富集十二烷基磺酸钠-蛋白质的复合物

提出了一种应用于毛细管筛分电泳中的电动超荷电结合柱头水塞堆积样品的方法,实现了十二烷基磺酸钠-蛋白质复合物的在线富集。一般情况下,电动超荷电方法是一种将电动进样与瞬时等速电泳联用的富集技术。具体过程是,首先在毛细管中注入背景电解质,再注入适量的前导电解质,然后电动进样一段时间。最后注入后导电解质开始瞬时等速电泳及分离的过程。本文在常规的电动超荷电技术基础上,在电动进样之前先注入一段含有聚合物的水塞以进一步提高富集效果。同时,考察了电动超荷电中不同富集方法叠加联用的效果,包括聚合物的筛分效应、结合水塞和不结合水塞的场放大样品进样效果、瞬时等速电泳等。结果表明,由于十二烷基磺酸钠-蛋白质复合物的质荷比接近,电动进样中的进样歧视得到消除,电动超荷电结合含聚合物水塞堆积样品的方法可以无歧视地在线富集十二烷基磺酸钠-蛋白质复合物,检测灵敏度增强1000倍以上。该方法非常适用于低丰度蛋白质的分析,并可同时提供相对分子质量信息。     

样品堆积——毛细管电泳的柱上浓缩技术

评叙了样品堆积，一种毛细管电泳提高检测灵敏度的柱上浓缩技术。样品堆积包括电堆积富集与场增加进样两种方法，分别在流动动力进样与电动进样过程中实现。本文从理论上说明了实现样品堆积及优化样品堆积富集效率须采取的实验措施，并对样品堆积目前的应用状况进行了全面介绍。     

场放大进样-毛细管电泳非接触式电导快速检测蔬菜中草酸

采用场放大进样-毛细管电泳非接触式电导,建立了分离检测蔬菜中水溶性草酸的方法。以25 mmol/L乙酸溶液为电泳运行液,未涂层石英毛细管,负高压分离,电动进样-11 kV×10 s,草酸可在5 min内获得良好分离和灵敏检测,检出限为6μg/L,定量限为20μg/L。日内和日间精度的相对标准偏差(RSD)≤5%。蔬菜样品中共存的常见无机阴离子和有机基质不干扰草酸的测定,样品无需复杂的前处理就可直接进样分析。该方法可用于蔬菜中水溶性草酸含量的检测。     

二维毛细管电泳电化学检测尿样中的β-阻断剂

设计并制作了在柱电化学(EC)检测池,用于在同一根毛细管中进行中心切割二维毛细管电泳(2D-CE)在线纯化分离检测尿样中的6种β-阻断剂.尿样先在15 mmol/L NaAc缓冲液中进行毛细管区带电泳(CZE)分离,带正电荷的β-阻断剂与中性和带负电荷的干扰物质分成不同区带,然后在检测端施加13.8 kPa压力将干扰成分从毛细管入口端排出,同时将目标组分驱送到毛细管入口端,最后在90 mmol/L NaAc-30 mmol/L SDS缓冲液中进行胶束电动毛细管色谱(MEKC)分离.场放大样品堆积(FASS)/胶束推扫在柱双重富集技术不仅有效抵消压力驱送过程中产生的区带扩散,还可进一步压缩样品区带,提高检测灵敏度.本方法成功用于服药后鼠尿样品中6种β-阻断剂的分离测定,经第一维CZE分离排除干扰后,在未涂层毛细管柱(60 cm ×50 μm i.d.)、90 mmol/L NaAc/HAc-30 mmol/L SDS运行缓冲液、检测电位0.8 V、运行电压10 kV条件下,对6种β-阻断剂进行在线富集分离,峰高、峰面积和迁移时间的相对标准偏差(RSD)分别为2.0%～4.1%, 1.4%～3.7%和0.9%～2.7%(n=6).本研究为毛细管电泳在复杂样品在线纯化分析等方面的应用提供了新方法.     

准静态扫集胶束电动毛细管色谱法测定扇贝样品中的贝类毒素

采用准静态扫集胶束电动毛细管色谱(MEKC)法测定了扇贝样品中的2种贝类毒素。毛细管内首先充满含十二烷基硫酸钠(SDS)的缓冲溶液,调节缓冲溶液的pH值,使电渗流等于SDS胶束的电泳流速,电动进样时,带正电荷的贝类毒素离子被SDS扫集吸附,由于SDS在毛细管内处于准静止状态,可使进样时间延长至320 s。与常规电动进样MEKC相比,石房蛤毒素和软骨藻酸的检测灵敏度分别提高950和810倍。该方法对石房蛤毒素和软骨藻酸的检出限分别为0.05,0.12 ng/m L。方法可实现对扇贝样品中2种贝类毒素的快速、灵敏检测。     

阴离子耗尽进样胶束扫集毛细管电动色谱法在线富集测定甘草黄酮类化合物

建立了一个毛细管胶束电动色谱(MEKC)在线富集阴离子耗尽进样(ASEI)联用扫集(sweeping)技术测定3种甘草黄酮化合物(异甘草素、甘草素和甘草苷)的方法。考察了MEKC的分离条件和富集体系的优化条件,其中样品基质、水塞进入时间、进样时间对目标化合物的富集效果有较大的影响。在优化实验条件下,异甘草素、甘草素和甘草苷的富集倍数分别提高了110、120、300倍,检出限分别为0.015、0.014、0.011mg/L。该方法用于中药制剂中甘草素、异甘草素和甘草苷含量的测定,回收率在90.6%～107%之间,相对标准偏差(RSD)均小于4.5%(n=3)。实验证明,该方法可成功地应用于实际样品中甘草素、异甘草素和甘草苷含量的测定     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.     

Knoevenagel condensation catalyzed by novel Nmm-based ionic liquids in water

A series of novel N-methyl morpholine (Nmm) based ionic liquids with 1,2-propanediol group were synthesized and used as catalysts for Knoevenagel condensation at room temperature in water. Under the effect of the catalyst, various aldehydes or aliphatic ketones could react with a wide range of activated methylene compounds well, including malononitrile, alkyl cyanoacetate, cyanoacetamide, β-diketone, barbituric acid, 2-arylacetonitrile and thiazolidinedione. Furthermore, most of the products could be separated just by filtrating and washing with water. Additionally, the catalyst is recyclable and applicable for the large-scale synthesis.     

Construction of polyheterocyclic spirotetrahydrothiophene derivatives via sulfa-Michael/aldol cascade reaction

A series of polyheterocyclic spirotetrahydrothiophene derivatives were obtained in moderate to excellent yields via a catalyst-free sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 under mild conditions. We also present the first asymmetric sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 with moderate to good enantioselectivities catalyzed by readily available chiral phase-transfer catalysts (PTCs).     

Suzuki-Miyaura reactions of the soluble guanylate cyclase inhibitor NS2028: a non-product specific route to C-8 substituted analogues

Both soluble guanylate cyclase (sGC) inhibitors ODQ 1 and NS2028 2 are synthesized via improved protocols. In the former case treating 3,4-dihydroquinoxalin-2(1H)-one oxime 8, which can be prepared in two steps from 1,2-benzenediamine, with 1,1′-carbonyldiimidazole (CDI) gives the dihydro-ODQ 10 that in the presence of KMnO₄ oxidises to give ODQ 1 in an overall yield of 46% starting from 1,2-benzenediamine. In the latter case, the synthesis affords NS2028 2 from 2-amino-4-bromophenol 3 in three steps with an overall yield of 85% and avoids the need for chromatography. Furthermore, Suzuki-Miyaura reaction conditions are described that enable the preparation of 8-aryl and 8-heteroaryl derivatives of NS2028 directly from NS2028 2. Finally, demethylation of the 8-(methoxyphenyl) substituted analogues afforded the 8-(hydroxyphenyl) derivatives 40-42. All new products are fully characterised.