Polarization maintaining holey fibers for residual dispersion compensation over S + C + L wavelength bands

We report on a highly birefringent holey fiber for broadband dispersion compensation covering the S, C, and L telecommunication bands i.e. wavelength ranging from 1460 to 1625 nm. The finite element method with circular perfectly matched layer boundary condition is used to investigate the guiding properties. Numerical analysis demonstrates that it is possible to obtain negative dispersion coefficient of about −470 to −850 ps/nm/km over S to L-bands and a relative dispersion slope perfectly matched with single mode fiber (SMF) of about 0.0036 nm⁻¹ at 1550 nm. At the same time birefringence of the order 2.53 × 10⁻² is realized at 1550 nm wavelength. Owing to superior optical properties of the proposed holey fiber, this can be a promising candidate for broadband dispersion compensation and sensing applications.     

Numerical analysis of birefringence and coupling length on dual-core photonics crystal fiber with complex air holes

A type of high birefringence dual-core photonic crystal fibers (DC-PCFs) with a central row of elliptical air holes have been proposed. The transverse electric field vector distributions of the two modes are evaluated, the birefringence or coupling length with the different parameters is numerically analyzed based on finite-element method. The numerical results show values for the birefringence of 8.247 × 10⁻³ (for wavelength, λ = 1.5 μm and lattice length, Λ = 1.3 μm), and for the coupling lengths about 3.1 mm and 2.6 mm (λ = 1.5 μm and Λ = 1.5 μm) to modes of x and y polarized, respectively. With the increasing of the air-filling fraction in proposed DC-PCF, the coupling length becomes longer and the birefringence becomes higher.     

High birefringence and low loss circular air-holes photonic crystal fiber using complex unit cells in cladding

We propose a high birefringence and low loss index-guiding photonic crystal fiber (PCF) using the complex unit cells in cladding by the finite-element method. Results show that the birefringence and confinement loss in such PCF fiber is determined not only by the whole cladding asymmetry but also the shape of the PCF core. The maximal modal birefringence and lowest confinement loss of our proposed structures at the excitation wavelength of λ = 1550 nm can be achieved at 8.7 × 10⁻³ and 5.27 × 10⁻⁵ dB/km, respectively.     

Analysis of a highly birefringent photonic crystal fiber with ellipse–rhombus air core

A novel highly birefringent photonic crystal fiber with small effective mode area is proposed. Four elliptical air-holes are designed in the internal layer of the fiber to cause the anisotropy, and the fiber has the property of highly birefringence and small effective mode area. The influences of elliptical air-holes on effective index, birefringence, effective mode area and nonlinear coefficient are analyzed by using full-vector finite element method (FEM). Simulation results show the birefringence can achieve the magnitude of 10⁻³ under the condition of d > 2.3 μm and a > 1.4 μm, which d and a are the distance and semimajor axis of elliptical air holes. By adjusting the parameters d and a, different effective mode area and nonlinear coefficient can be obtained, which demonstrates the flexibility of the proposed photonic crystal fiber.     

Loss-reduced highly birefringent selectively liquid-filled photonic crystal fibers

We have theoretically investigated the birefringence and loss properties of the selectively liquid-filled photonic crystal fibers with the liquid asymmetrically infiltrated into one-line air holes along x-axis. A high birefringence value B = 1.74 × 10⁻³ can be achieved at λ = 1.55 μm. By varying the index of the infiltrating liquid, the birefringence values are shown to be well tuned. In addition, the confinement losses can be efficiently reduced by diminishing the number of liquid holes, which is quite useful for optical devices.     

Designing of endlessly single mode polarization maintaining highly birefringent nonlinear micro-structure fiber at telecommunication window by FV-FEM

An endlessly single mode highly polarization maintaining nonlinear microstructure fiber at telecommunication window is reported via full-vector finite element method. By taking three ring hexagonal PCF with suitable fiber parameter such as air hole diameter in cladding region d = 0.8 μm, pitch 2.3 μm and introducing four symmetrical large air holes near core region d′ = 2 μm, single mode (V_eff ≤ π), small effective mode area 2.7 μm², nonlinear co-efficient 44.39 W⁻¹ km⁻¹, high phase birefringence of the order of 10⁻³ and group birefringence of the order of 10⁻⁴ with beat length 0.3 μm at wavelength 1.55 μm are achieved.     

Polarization maintaining large nonlinear coefficient photonic crystal fibers using rotational hybrid cladding

In this paper, we present and explore a new hybrid cladding design for improved birefringence and highly nonlinear photonic crystal fibers (PCFs) in a broad range of wavelength bands. The birefringence of the fundamental mode in such a PCF is numerically analyzed using the finite element method (FEM). It is demonstrated that it is possible to design a simple highly nonlinear hybrid PCF (HyPCF) with a nonlinear coefficient of the about 46 W⁻¹ km⁻¹ at a 1.55 μm wavelength. According to simulation, the highest modal birefringence and lowest confinement loss of our proposed structure at the excitation wavelength of λ = 1.55 μm can be achieved at a magnitude of 1.77 × 10⁻² and of the order less than 10² dB/km with only five rings of air-holes in the fiber cladding.     

Design of two kinds of dual-core high birefringence and high coupling degree photonic crystal fibers

We propose two kinds of dual-core high birefringence and high coupling degree photonic crystal fibers (DHBHCD-PCFs) in this paper. The characteristics of birefringence and coupling are studied by multipole method. Numerical results show that the birefringence and the coupling length reach an order of 10^− 2 and 10^− 5 m at 1.55 μm, respectively. It is found that the birefringence and the coupling intensity increase with the increase of air-filling fraction, which is different from other dual-core fibers. The DHBHCD-PCFs with high degree of polarization-maintaining and high coupling degree are helpful for manufacturing minitype photonic apparatus.     

Photoinduced anisotropy in an azo-containing ionic liquid-crystalline polymer

Photoinduced anisotropy in an azobenzene ionic liquid-crystalline polymer was investigated through dichroism, birefringence and polarization holography. A dichroism degree of 1.58 and a birefringence value Δn ∼ 10⁻² were achieved in the polymer film at room temperature, and the polymer film was found to possess the characteristics of reversible and long-term optical storage. Particularly the stored birefringence could be enhanced to Δn ∼ 10⁻¹ by annealing the film, and it is attributed to the thermal self-organization of the molecules. Furthermore, linear- and circular-polarization holographic recordings were accomplished in the polymer film and pure polarization gratings were produced.     

Squeezed hexagonal highly birefringent photonic crystal fiber with low effective modal area

A modified hexagonal index guiding photonic crystal fiber made of pure silica with high birefringence and a low effective modal area is proposed, and properties, including birefringence and effective modal area, are numerically analyzed using the multipole method. Numerical results show that high birefringence of 1.362 × 10⁻² and a low effective modal area of 3.435 μm² are achieved at 1.55 μm, simultaneously. Moreover, impacts of hole spacing and hole size on birefringence and effective modal area are also investigated in detail.     

Large-scale forcing with less communication in finite-difference simulations of stationary isotropic turbulence

This study proposes a new forcing scheme suitable for massively-parallel finite-difference simulations of stationary isotropic turbulence. The proposed forcing scheme, named reduced-communication forcing (RCF), is based on the same idea as the conventional large-scale forcing scheme, but requires much less data communication, leading to a high parallel efficiency. It has been confirmed that the RCF scheme works intrinsically in the same manner as the conventional large-scale forcing scheme. Comparisons have revealed that a fourth-order finite-difference model run in combination with the RCF scheme (FDM-RCF) is as good as a spectral model, while requiring less computational costs. For the range 80 < Re_λ < 540, where Re_λ is the Taylor microscale-based Reynolds number, large computations using the FDM-RCF scheme show that the Reynolds dependences of skewness and flatness factors have similar power-laws as found in previous studies.     

Nonlinear refraction and photoinduced birefringence in chlorophosphonazo I doped polymer thin films

The nonlinear refraction and photoinduced birefringence of chlorophosphonazo I (CPA I ) doped PVA thin films were investigated. The single-beam Z-scan measurement showed that CPA I doped PVA thin film possessed a large value of nonlinear refractive index (n₂=1.82×10⁻¹² cm²/W) under a pulse 532 nm excitation, and the mechanism accounting for the process of nonlinear refraction was discussed in term of resonant electronic effect. Moreover, fast and stable molecular reorientation was observed when investigating the photoinduced birefringence of CPA I doped PVA thin film with a CW 532 nm laser as pump light and a CW 650 nm laser as probe light.     

Structure and optical properties of ZnS thin films grown by glancing angle deposition

The glancing angle deposition (GLAD) technique was used to deposit ZnS films by electron beam evaporation method. The cross sectional scanning electron microscopy (SEM) image illustrated a highly orientated microstructure composed of slanted column. The atomic force microscopy (AFM) analysis indicated that incident flux angle had significant effects on the nodule size and surface roughness. Under identical nominal thickness, the actual thickness of the GLAD films is related to the incident flux angle. The refractive index and in-plane birefringence of the GLAD ZnS films were discussed, and the maximum birefringence Δn = 0.036 was obtained at incident flux angle of α = 80°. Therefore, the glancing angle deposition technique is a promising way to create a columnar structure with enhanced birefringent property.     

The influence of skew rays on angular losses in air-clad fibres

Detailed experimental transmission properties of high numerical aperture air-clad undoped fibres are presented. Measurements of the angular transmissivity indicate a 15% lower numerical aperture (NA = 0.75) compared to theoretical predictions for the bridge thickness and wavelength ratio of δ/λ = 0.226. The discrepancy is attributed to skew rays that are deliberately launched and which are subject to larger loss rates through diffractive tunnelling in frustrated total internal reflection than meridional rays. Measurements of the angular propagation losses show that light launched at angles less than the critical angle for total internal reflection experiences low initial losses as well as low propagation losses. Light launched at steeper angles experiences a significant initial loss attributed to loss of skew rays within 1.5 m of propagation as well as larger general propagation losses.     

Nonlinear optical properties and photoinduced anisotropy of an azobenzene ionic liquid-crystalline polymer

The nonlinear optical properties and photoinduced anisotropy of an azobenzene ionic liquid-crystalline polymer were investigated. The single beam Z-scan measurement showed the polymer film possessed a value of nonlinear refractive index n₂ = −1.07 × 10⁻⁹ cm²/W under a picosecond 532 nm excitation. Photoinduced anisotropy in the polymer was studied through dichroism and photoinduced birefringence. A photoinduced birefringence value Δn ∼ 10⁻² was achieved in the polymer film. The mechanism for the nonlinear optical response and the physical process of photoinduced anisotropy in the polymer were discussed.     

Electrical assisted laser floating zone (EALFZ) growth of 2212-BSCCO superconducting fibres

The new electrical assisted laser floating zone (EALFZ) technique was used to grow superconducting fibres of Bi₂Sr₂CaCu₂O₈ (2212-BSCCO). The application of an electrical current through the crystallization interface proved to advantageously modify the phase nature and texture of 2212-BSCCO polycrystalline fibres compared to conventionally laser floating zone (LFZ) grown ones. The current application during the growth induces a selective and more intense ionic migration along the fibre axis. As a result, an increase in superconducting phase fraction and a decrease of residual melt were observed together with grain alignment intensification. The main outcome in the superconducting properties is the improvement of the critical current density at 77 K, from 1.2 × 10³ A/cm², in the LFZ fibres, to 2.8 × 10³ A/cm², in the EALFZ processed ones.     

Bandwidth tuning of hybrid liquid-crystal Šolc filters based on an optical cancelling technique

We demonstrate that in addition to their role in tuning the wavelength of an N-stage hybrid liquid-crystal Šolc filter, liquid-crystal cells can also be used to vary the transmission bandwidth of such filter around any of the tuned wavelength. This bandwidth tuning is based on the variation of the number of stages by what we call here an “optical cancelling technique”. This is achieved by varying the birefringence of the liquid-crystal cells whose optical path difference switches between two particular values. We show that for a 10-stage filter and at λ_i = 1.532 μm, the calculated 3-dB bandwidth varies from 2.6 to 11.8 nm when the number of “optically-cancelled” hybrid plates increases from 0 to 8. During the tuning process, the contrast ratio remains equal to that of the equivalent classical Šolc filter.     

Picosecond laser amplification system with 93 W high average power

A high average power picosecond laser amplification system with diode-end-pumped Nd:YVO₄ and diode-side-pumped Nd:YAG is described. Laser with power up to 92.7 W, repetition frequency of 73.3 MHz, pulse duration of 26.5 ps, and beam quality of M² < 3.5 is generated in the amplification system. Thermal-birefringence-induced depolarization in the Nd:YAG rod laser head amplifier is measured to be 21.9 W though birefringence compensation is performed.     

Highly birefrigent photonic crystal fiber with high negative dispersion for broadband dispersion compensation

In this paper, we proposed a dual-enhanced core photonic crystal fiber (PCF) with high birefringence and ultra-high negative dispersion for dispersion compensation in a polarization maintained optical system. Using finite difference time domain (FDTD) method, we presented dispersion compensating PCF (DC-PCF) with negative dispersion between −1650 ps nm⁻¹ km⁻¹ and −2305 ps nm⁻¹ km⁻¹ in C-band and particularly −2108 ps nm⁻¹ km⁻¹ in λ = 1.55 μm wavelength. By this method, we can compensate dispersion in 124 km long span of a conventional single mode fiber (SMF) by 1 km-long of the DC-PCF at λ = 1.55 μm wavelength. Moreover, fundamental mode of the proposed PCF can induce birefringence about 3.5 × 10⁻³ at 1.55 μm wavelength.     

Highly birefringent photonic crystal fiber polarization splitter made of soft glass

A soft glass dual core polarization splitter based on highly birefringent photonic crystal fiber (PCF) is proposed and the full vector finite element method (FEM) is employed to analyze the impacts of structural parameters on birefringence and the coupling length, and simulation results show that high birefringence on the order of 10⁻² can be obtained at 1.55 μm, moreover, hole size, hole pitch and elliptic ratio all affect birefringence and the coupling length. Based on these results, the PCF's structure is optimized to realize a polarization splitter of 282 μm whose largest extinction ratio is around −45.42 dB at 1.55 μm. Meanwhile, the bandwidth at the extinction ratio of −10 dB is about 90 nm, and around 32 nm at −20 dB.