Optical filter based on subtractive dispersion planar reflective gratings

We have successfully designed, fabricated, and tested an optical filter based on cascaded planar reflective gratings. The device uses a combination of two grating elements arranged in a subtractive dispersion configuration. The first grating demultiplexes a 300 nm wide band and drops optical channels at 1490 and 1550 nm, commonly used in passive optical networks. The second grating completely counter-balances the dispersion properties of the first grating and ultimately yields zero dispersion in the output waveguide. Such a configuration allows the transmission of optical signals though the device in an ultra-wide band spanning 1250-1410 nm. The filter was manufactured using an industry standard silica-on-silicon process which was augmented with grating facet formation and metallization. In spite of using low refractive index contrast waveguides (0.82%), the device had a remarkably low footprint of only 0.21 cm². Applications of the device in passive optical networks are discussed.     

Power penalty of cascaded Bragg gratings in the presence of PMD and PDL

Considering the presence of birefringence in Bragg gratings, the spectral polarization mode dispersion (PMD) and polarization dependent loss (PDL) induced power penalty of eye opening is examined for a network with cascaded Bragg gratings. It is shown that when the birefringence in the grating is less than 10⁻⁵, the induced power penalty is less than 0.1 dB for a network with up to 30 cascaded Bragg gratings. However, when the grating birefringence is on the order of 10⁻⁴, the induced power penalty can be as high as 5.6 dB for a network with 14 cascaded Bragg gratings.     

Phase interpretation for polarization-dependent near-field images of high-density gratings

It has been described that the near-field images of a high-density grating at the half self-imaging distance could be different for TE and TM polarization states. We propose that the phases of the diffraction orders play an important role in such polarization dependence. The view is verified through the coincidence of the numerical result of finite-difference time-domain method and the reconstructed results from the rigorous coupled-wave analysis. Field distributions of TE and TM polarizations are given numerically for a grating with period d = 2.3λ, which are verified through experiments with the scanning near-field optical microscopy technique. The concept of phase interpretation not only explains the polarization dependence at the half self-imaging distance of gratings with a physical view, but also, it could be widely used to describe the near-field diffraction of a variety of periodic diffractive optical elements whose feature size comparable to the wavelength.     

Tunable optical add-drop multiplexer based on long-period fiber gratings for coarse wavelength division multiplexing systems

We propose and experimentally demonstrate a voltage-controllable add-drop multiplexer with a tunable coupler based on long-period fiber gratings (LPFGs). The tunable coupler is based on cladding mode coupling between two parallel LPFGs with divided coil heaters, which controls the resonant wavelength positions of the two LPFGs. The wavelength tunability of the tunable coupler is measured to be -0.45 nm/degrees C in the temperature range from 20 to 120 degrees C. The large tuning range of optical signals (approximately 50.54 nm) from 1502.32 to 1552.86 nm, which covers both the short (S) and the conventional (C) bands, is achieved. The channel isolation is as high as approximately 40 dB. It has several advantages, including a broad tuning range of wavelength in both the S- and C-bands, high channel isolation, no backreflection, and so on.     

TM-mode perturbation analysis of dielectric gratings

An improved perturbation procedure that was previously presented for TE modes guided by dielectric gratings is extended here to TM modes. In both cases, the fields are described in terms of a transverse transmission-line network, which lends considerable physical insight into the behavior of dielectric gratings. However, TM modes require equivalent sources of both the voltage and current varieties, in contrast to TE modes which involve only current sources. By comparing with an exact solution, the numerical results obtained by the present perturbation procedure are found to be very accurate. This work was supported by the U.S. Office of Naval Research, under Contract No. N 00014-67-A-0438-0014, and by the U.S. Joint Services Electronics Program, under Contract No. F 44620-69-C-0047.     

Long-period fiber gratings fabricated with a CO2 laser beam and phase mask

A new holographic technique is proposed for fabricating long-period fiber gratings (LPGs) using a CO₂-laser and a phase mask. A CO₂ laser operating at 10.6 μm is incident normally on the phase mask and the diffracted interfering beams imprint a thermally induced periodic modulation into the cladding of the fiber placed behind the mask. Preliminary results of this technique are presented and discussed. An unusual self-tapered fiber LPG (STFLPG) is also presented.     

Stress reduction in planar waveguide using polymer top layer

Planar optical waveguides consisting of layers from different materials created at elevated temperatures usually exhibit substantial stresses. By controlling the layer thickness of polymeric top layer on planar waveguide structures, it is possible to use very thin layers for stress compensation, significantly reducing required deposition times. It is possible to reduce birefringence within planar device by controlling top polymer layer thickness with thermal expansion coefficient greater than silica or PMMA.     

A 1 × 4 polarization and wavelength independent optical power splitter based on a novel wide-angle low-loss Y-junction

A 1 × 4 polarization and wavelength independent optical power splitter is reported. This device is based on a novel wide-angle low-loss Y-junction structure which can give a theoretical TE junction excess loss of 0.26 dB at a branching angle of 16°. To the best of our knowledge, it is so far the lowest reported loss at such a large angle. The detailed design of the device and its fabrication are described. Our experimental results show the measured TE excess loss to be 1.2 dB and TM excess loss 1.8 dB for the whole splitter over the wavelength between 1.47 μm and 1.57 μm.     

平面波导偏转光栅特性分析

本文借助由偏转波耦合方程得出的偏转系数R就平面波导偏转光栅的角度特性以及频率特性进行了讨论。分析表明,偏转光栅的这些特性主要决定于入射波与偏转波间耦合系数|K|与光栅长度L的乘积|K|L,而不单独依赖于|K|或L。     

Design of high-efficiency diffraction gratings based on total internal reflection for pulse compressor

We present designs of high-efficiency compression grating based on total internal reflection (TIR) for picosecond pulse laser at 1053 nm. The setup is devised by directly etching gratings into the bottom side of a prism so that light can successfully enter (or exit) the compression grating. Dependence of the −1 order diffraction efficiencies on the constructive parameters is analyzed for TE- and TM-polarized incident light at Littrow angle by using Fourier modal method in order to obtain optimal grating structure. The electric field enhancement within the high-efficiency TIR gratings is regarded as another criterion to optimize the structure of the TIR gratings. With the criterion of high diffraction efficiency, low electric field enhancement and sufficient manufacturing latitude, TIR compression gratings with optimized constructive parameters are obtained for TE- and TM-polarized incident light, respectively. The grating for TE-polarized light exhibits diffraction efficiencies higher than 0.95 within 23 nm bandwidth and relatively low square of electric field enhancement ratio of 5.7. Regardless of the internal electric field enhancement, the grating for TM-polarized light provides diffraction efficiencies higher than 0.95 within 42 nm bandwidth. With compact structure, such TIR compression gratings made solely of fused silica should be of great interest for application to chirped pulse amplification (CPA) systems.     

Femtosecond pulse shaping with space-to-time conversion based on planar optics

We propose a novel structure of planar optical configuration for implementation of the space-to-time conversion for femtosecond pulse shaping. The previous apparatuses of femtosecond pulse shaping are 4f Fourier-transforming type system that is usually large, expensive, difficult to align. The planar integration of free-space optical systems on solid substrates is an optical module with the attractive advantages of compact, reliable and robust. This apparatus is analyzed in details and the design of the particular lens for femtosecond pulse shaping based on planar optics is presented.     

Large refractive index modulation tilted holographic planar structured grating based on dichromated gelatin

A new type grating, tilted holographic planar structured dichromated gelatin (DCG) grating with large refractive index modulation, is presented in this paper. The grating is inscribed by superposing two coherent laser beams from the front and the thin side surfaces, respectively. The relationship between the tilted angle and the three types of coupling modes is analyzed when coupling with fiber. Besides, the couple mode theory and experimental investigation are applied on major characteristics analysis of the radiation mode DCG grating of tilted angle 45°. Due to the tilted planar structured grating has large refractive index modulation, it not only offers convenience for connecting (or integrating) with other fiber or waveguide-based devices, but also provide some special characteristics such as low wavelength selectivity (which is required for some applications such as multiple spectrum biomedical imaging). Therefore, this unique grating device has a wide application in optical fields such as for the waveguide-based, parallel, multiple spectrum imaging system.     

基于光纤光栅波长路由的光纤自愈网

介绍了一种基于光纤光栅波长路由的全光双纤单向自愈环网,环内四节点具有16×10Gbit/s的传输能力。利用啁啾光纤光栅(CFBG)的波长可选择特性,实现了分布式的上下话路和波长选择功能,同时有效地补偿了传输色散。网络管理参照了网络管理协议(SNMP)的网络管理模型,通过对网络的重要参数进行实时监测来控制网络运行。实验结果表明,当环上任一处光缆发生故障时,通信业务能够自动恢复,恢复时间小于50ms,可实现网络的快速自愈,符合ITU-T G.841的建议规定。     

Effect of recording conditions on the anisotropic diffraction of volume holographic gratings

The anisotropic Bragg diffraction of the volume holographic gratings in photorefractive crystals are investigated based on the model of anisotropic coupled-wave theory. The effect of the initial intensity ratio and the recording angles of the two recording waves on the anisotropic Bragg diffraction properties is discussed. It is shown that both the ratio of the initial intensity and the incident angles of the recording waves are selective action for the anisotropic Bragg diffraction efficiency of the volume holographic gratings, while these two recording conditions are not selective action for the isotropic Bragg diffraction. Furthermore, the Bragg phase matching condition of anisotropic diffraction is analyzed when the recording angles change.     

A simple integrated ratiometric wavelength monitor based on a directional coupler

A simple integrated ratiometric wavelength-monitoring device based on a single directional coupler (DC) is proposed and designed. To meet the desired spectral response, a computationally fast method is proposed to optimize the separation distance between two waveguides and the interaction length of the DC based on the local supermodes solution. The wavelength discrimination of the designed structure is demonstrated numerically.     

Large deflection angle fan-out element based on dislocated grating array

We study the possibility of designing and fabricating a fan-out element based on a computer-generated hologram (CGH) which is capable of providing a large deflection angle without using excessively small CGH cells. The recent development of CGHs using dislocated grating arrays was employed to design the fan-out element. Experimental results show that a deflection angle of 41° was achieved using a CGH cell size of 10 μm×10 μm and an operating optical wavelength of 0.98 μm. Further experimental results and theoretical analysis are also presented in order to investigate the characteristics of this type of fan-out element.     

Demonstration of two-point velocity measurement using diffraction grating elements for integrated multi-point differential laser Doppler velocimeter

We have proposed a configuration of an integrated multi-point differential laser Doppler velocimeter (LDV) using arrayed waveguide gratings (AWGs) as grating elements. This paper demonstrates two-point velocity measurement using the proposed configuration with diffraction grating elements. An experiment was conducted using a free-space optical setup with bulk diffraction gratings instead of AWGs. The experimental results indicate that velocities at different positions can be measured using the proposed configuration. The measured separation of the two measurement positions was about 20.5 mm, about 11% of the working distance.     

基于长周期光纤光栅的FBG解调方法北大核心CSCD

研究了基于长周期光纤光栅(long-period fiber gratings,LPFG)的光纤布拉格光栅(fiber Bragg gratings,FBG)解调方法,该方法利用LPFG的透射谱作为边沿滤波器解调FBG,其解调性能主要取决于LPFG的透射光谱深度。详细分析了CO_(2)激光写制法对透射光谱的影响,制作了透射光谱深度为25 dB的LPFG,并采用该光栅搭建了FBG解调装置,将FBG粘贴于金属应变片表面,测试了其静态与动态响应特征。实验结果表明:该方法制作简单,成本低,具有较好的线性动态范围,可以实现较高灵敏度的FBG解调。     

两介质波导的最小中心间距

根据波导的耦合模理论,推导出两介质波导单位长度串扰的表达式,并在一定串扰的前提下,定义了两介质波导最小间距和最小中心间距,提出采用最小中心间距做为衡量波导集成度的参量.分析了波导尺寸及折射率差对最小间距、最小中心间距的影响.分析和模拟结果表明:折射率差越大,两波导最小间距、最小中心间距越小;在大折射率差的条件下,两波导最小间距可以降低到1 μm以下;在给定的工作波长、折射率分布的条件下,两介质波导的最小中心间距存在最小值.