L波段可调谐线形腔Er/Yb共掺双包层光纤激光器

报道了一种结构简单、工作在L波段、可调谐的线形腔Er/Yb共掺双包层光纤激光器.利用由两段高双折射光纤和两个偏振控制器构成的环镜滤波器对激光器进行调谐，使调谐范围达到34 nm，功率起伏小于±0.2 dB.用976 nm多模LD泵浦Er/Yb共掺双包层光纤产生的ASE作为二次泵源，对未泵浦的一段光纤进行泵浦，使腔内Er/Yb共掺光纤的增益谱移到L波段;多个泵浦源同时对Er/Yb共掺双包层光纤进行侧向泵浦，使激光器输出功率超过了200 mW.     

Self-Q-switching and mode-locking in an all-fiber Er/Yb co-doped fiber ring laser

Using a section of un-pumped Er/Yb co-doped fiber (EYDF) as a saturable absorber, Self-Q-switching and self-mode-locking pulses have been obtained in an all-fiber EYDF ring laser. Such laser is with the self-Q-switched pulse threshold of 135.22 mW, the repetition rate of approximately 22.2 kHz, and the pulse duration of ∼2.8 μs, respectively. The self-mode-locked threshold is 591.8 mW. By incorporating the saturable absorption in an un-pumped EYDF and a Mach-Zehnder interferometer, when the pump power is increased to 1242.9 mW, the continuous-wave (CW) mode-locking with the pulse width of 26 ns has also been demonstrated experimentally for the first time.     

Experimental characterization of an Yb-doped fiber ring laser with frequency-shifted feedback

We present experimental characteristics of an Yb³⁺-doped fiber ring laser operating with frequency-shifted feedback (FSF) through an acousto-optic modulator (AOM) and seeded by both a stationary continuous-wave (CW) laser and spontaneous emission. We show the spectrum and output characteristics for operations with several effective gain bandwidths, as established by Fabry-Perot etalons inside the cavity. Observation using a high finesse Fabry-Perot interferometer shows that, as expected from earlier work, although the spectrum of the FSF laser without seeding is continuous, when seeded by a CW-laser the spectrum consists of a comb of discrete modes, each offset from the seed by an integer number of AOM frequency shifts. The experimental results are in excellent quantitative agreement with the theory developed earlier [L. Yatsenko, B.W. Shore, K. Bergmann, Opt. Commun. 236 (2004) 183].     

Dual-wavelength-switching operation based on optical bistability in pump-bypassed ytterbium-doped fiber laser

The bistable feature of residual pump in a pump-bypassed Yb-doped fiber laser offers the potential to pump Er/Yb co-doped fiber in a bifurcated cavity for the lasing of the 1537 nm line. The results of our proof-of-concept demonstration show that the oscillations at 1040 nm and 1537 nm are operated in the wavelength-switching mode, and this suggests that the combination of optical bistability in a pump-bypassed fiber laser cavity with a bifurcated cavity could be one simple and efficient method for switchable dual-wavelength operation. PACS 42.55.Wd; 42.65.Pc; 42.79.Ta     

Yb：Er共掺杂对掺铒光纤激光器中自脉冲行为的抑制作用

为了进一步提高镱铒共掺杂光纤激光器的实用性，对镱铒掺杂光纤激光器的自脉冲现象进行了理论分析。利用掺杂光纤中铒离子对的可饱和吸收的作用而引起自脉冲运转及离子对互作用模型作为理论基础建立系统模型，通过理论计算分析了共掺杂镱后掺铒光纤的有效抽运速率，证明了镱铒共掺杂可以提高有效抽运速率。使用这种光纤，可以使抑制光纤激光器中离子对导致的自脉冲效应所需的抽运功率水平大大降低。半导体激光器输出的抽运功率足以抑制由离子对导致的自脉冲，提供稳定激光运转。在研制稳定单频或高重复频率锁模光纤激光器方面，这种可用激光二极管抽运的镱铒共掺光纤具有很大的潜力。     

高功率掺镱双包层光纤放大器放大特性理论模拟

 运用掺镱双包层光纤放大器的理论模型,分析了连续和脉冲光放大时放大自发辐射(ASE)的计算方法。采用Runge-Kutta方法求解了考虑ASE稳态时掺镱双包层光纤放大器的放大特性,采用有限差分法求解了矩形、高斯和超高斯脉冲的放大特性。结果表明：用3 m长的双包层光纤、10 W的泵浦功率可以将脉宽3 ns、峰值功率为1 W的脉冲信号光峰值功率放大到15 kW左右;在饱和增益情况下,脉冲的波形变尖,宽度变窄;采用短的大模场双包层光纤和后向泵浦方式可以有效地降低ASE,并避免有害非线性效应。     

Wavelength tunable erbium-doped fiber ring laser operating in L-band

We describe a novel erbium-doped fiber ring laser utilizing the backward amplified spontaneous emission (ASE) power as a secondary pump source so that it can operate in L-band stably. The output wavelength can be tuned in a wide range of 45 nm, from 1560 to 1605 nm. We also compared this scheme with the condition of not using the ASE as secondary pump source, and found this scheme could improve the performance of the laser when using the same components.     

Erbium-ytterbium co-doped multi-wavelength double-clad fiber laser around 1612 nm

We report an erbium-ytterbium (Er/Yb) co-doped multi-wavelength laser operation around 1612 nm. The fiber laser was constructed in a figure-of-eight configuration and using a piece of polarization-maintaining (PM) Er/Yb double clad fiber as the gain medium. The oscillation laser lines around 1612 nm could be controlled by carefully adjusting the polarization controllers in the cavity, which might result in single line, dual line or triple line fiber laser operation. The line space was measured about 3.3 nm (±0.2 nm) which was believed to be strongly dependent on the length of the PM Er/Yb co-doped double-clad fiber.     

Comment on "passively Q-switched fiber laser that uses saturable Raman gain"

Recently, an interesting pulsing behavior of a fiber laser with intracavity Raman conversion was reported [Y. Zhao and S. D. Jackson, Opt. Lett.31, 751 (2006)]. The pulsing has been interpreted as passive Q switching, but this interpretation needs to be revised. An alternative explanation predicts transient phenomena, which do not lead to a regular pulse train.     

High-power Tm-doped fiber distributed-feedback laser at 1943 nm

We report on high-power operation of a fiber distributed-feedback (DFB) laser fabricated from Tm-doped photosensitive alumino-silicate fiber and in-band pumped by an Er/Yb fiber laser at 1565 nm. The fiber DFB laser yielded up to 875 mW of single-ended output at 1943 nm on two orthogonally polarized modes for 3.5 W of absorbed pump power. Further scaling of the DFB laser output power was achieved with the aid of a simple Tm-doped fiber amplifier stage spliced directly to the DFB fiber without the need of an optical isolator. The maximum output power from the DFB laser and fiber amplifier was >3 W for a combined absorbed pump power of 8.1 W. The influence of thermal loading, owing to quantum defect heating in the Tm-doped core, on the output power and longitudinal mode behavior is discussed, and the prospects for further improvement in performance are considered.     

Amplified spontaneous emission properties of a single mode Er3+-doped tellurite fiber

Spectral characteristics of the amplified spontaneous emission(ASE)from a novel single mode Er3+ doped tellurite fiber with D-type cladding is reported in this letter.When pumped at 980 nm,an ASE source that has nearly a 100-nm flat FWHM bandwidth is obtained with a fiber length of 30-60 cm. Variation of ASE spectra with pump powers and fiber lengths are measured.Output power up to 2.0 mW is obtained with a launched pump power of 660 mW.     

Temperature effects on supercontinuum generation using a continuous-wave Raman fiber laser

We describe the effect of temperature variations on supercontinuum (SC) generation in optical fibers using a continuous-wave (CW) Raman fiber laser as a pump. We achieve supercontinuum generation by pumping only ∼2 W of power into a 7 km-long nonzero dispersion-shifted fiber (NZDSF) in the region of small anomalous dispersion. In these conditions, the supercontinuum builds up basically on modulational instability and Raman. At room temperature, the supercontinuum covers effectively the S, C and L transmission bands defined by the International Telecommunication Union (ITU). Temperature tuning of the fiber environment provides a means of tuning the fiber dispersion, and thus a means of changing the width and shape of the supercontinuum spectrum. We demonstrate a 27% increase in the 10-dB SC width. We believe that the application of this new tuning mechanism to other experimental configurations using pulsed sources might be used to produce extremely broad supercontinuums.     

All-fiberized Tm-doped fiber MOPA with 30-W output power

We demonstrate a 30-W all-fiberized laser in a master oscillator power amplifier(MOPA) structure with a central wavelength of 1 950 nm.The laser is a continuous-wave(CW) operation with double-clad Tm-doped silica fiber pumped by pigtailed laser diodes with a central wavelength of 793 nm.The optical-to-optical efficiency of the MOPA system is 37.5% with respect to the total 80-W pump power.The maximal slope efficiency of the system is approximately 43%,which belongs to the main amplifier and exceeds the Stoke limit.No obvious amplified spontaneous emitting(ASE) is observed in the experiment,and the power can be scaled straightforwardly by improving the pump power.     

自调Q、自锁模铒/镱共掺光纤激光器

研究了结构新颖的环形腔铒/镱（Er/Yb）共掺双包层光纤激光器.为了获得高功率激光输出,使用6个激光二极管（LD）同时抽运Er/Yb共掺光纤,采用光纤光栅（FBG）Sagnac环作为波长选择器,得到了中心波长为1548.11 nm、谱线宽度为0.06 nm的窄线宽激光输出;并利用增益光纤作为可饱和吸收体,实现了自调Q、自锁模脉冲输出.当抽运功率为719 mW时,激光器输出自调Q脉冲,脉冲周期为20μs,脉冲宽度为2.8μs,脉冲的平均功率为38.4mW,峰值功率为274.3mW;当抽运功率为3.6 W时,激光器输出自锁模脉冲,脉冲宽度为4ns,平均功率为319 mW,脉冲峰值功率大于10 W,重复频率为7.937 MHz.     

Quantitative analysis of optical power budget of bismuth oxide-based erbium-doped fiber

We investigated optical power budget of Bi₂O₃-based erbium-doped fiber (BIEDF). Lateral spontaneous emissions and scattering laser powers in the BIEDF were measured quantitatively by using an integrating sphere. Compared with the power of amplified spontaneous emission and signal detected at the output fiber end, it was found that considerable powers were consumed by the laterally emitting lights. As an optically undetected loss limits power conversion efficiency (PCE) of the fiber amplifier, the effect of nonradiative decay from the termination level of pump excited state absorption (pump ESA) was estimated from decay rate analyses of the relevant levels. The nonradiative loss was comparable to amplified signal power in the BIEDF when pumped with a 980-nm LD. Nonradiative decay following cooperative upconversion (CUP) process is also discussed using rate equations analysis.     

Yb3+:Y2O3透明陶瓷激光器获得5 W连续激光输出

用带尾纤输出的激光二极管作为抽运源,采用端面抽运10％Yb^3 ：Y2O3多晶透明陶瓷的方式获得了连续激光输出。抽运阈值功率为5．6W,当陶瓷介质吸收的抽运功率为31．11W时,Yb^3 ：Y2O3多晶透明陶瓷获得了最大连续激光输出功率5．48W。光—光转换效率为17．6％,斜率效率为25％。同时在激光实验过程中,没有发现饱和现象,因此采用更高功率的激光二极管作为抽运源,陶瓷的激光输出功率会得到进一步提高。这一研究成果表明,多晶透明陶瓷是一种非常有潜力的激光增益介质。     

Pump-Induced Lasing Wavelength Shift in Er/Yb Codoped Fiber Grating Lasers

１ＩｎｔｒｏｄｕｃｔｉｏｎＥｒｂｉｕｍ／Ｙｔｅｒｂｉｕｍｃｏｄｏｐｅｄｆｉｂｅｒｓａｒｅｉｄｅａｌｇａｉｎｍｅｄｉａｆｏｒｃｏｎｓｔｒｕｃｔｉｎｇｓｉｎｇｌｅｆｒｅｑｕｅｎｃｙｆｉｂｅｒｌａｓｅｒｓ．Ｔｈｅｉｒｂｒｏａｄａｂｓｏｒｐｔｉｏｎｂａｎｄ...     

High-energy Q-switched operation of a fiber-laser-pumped Er:YAG laser

A high-energy Q-switched Er:YAG laser in-band pumped by an Er,Yb co-doped fiber laser is reported. A simple two-mirror multi-mode resonator incorporating an electro-optic Q-switch and a multi-Brewster-plate polarizer was employed, together with a simple compensation scheme to reduce the depolarization loss due to thermally induced stress birefringence in the Er:YAG crystal at high pump powers. The laser yielded Q-switched pulses at 1617 nm with 30.5-mJ pulse energy and <20-ns pulse duration (FWHM) at 20-Hz repetition rate, corresponding to a peak power of >1.5 MW for 55 W of pump power at 1532 nm. The prospects for further improvement in Q-switched performance are discussed.     

Theoretical and experimental study of transient response of the Yb-doped fiber amplifier

Some analysis of the transient response of the Yb-doped fiber amplifier are performed by solving a set of time-dependent rate and power transfer equations based on finite-difference method.Meanwhile,the variation of time to reach the steady state for upper level population distribution,the forward and backward amplified spontaneous emissions(ASEs)and stored energy on the system parameters including pump power,fiber length,Yb-doped concentration,and core area are numerically simulated,respectively.The results show that,by optimizing pump pulse width,stored energy can reach or even exceed the steady state value of continuous wave(CW)pump.By increasing Yb-doped concentration and core area,stored energy is increased,the ASE is suppressed and the ASE built-up time is postponed.In addition,the experimental results show the validity of the theoretical ASE built-up time.The obtained results can provide important guiding for the optimization of pump pulse width and fiber parameters.     

Suppression of pump-to-Stokes relative intensity noise transfer in Raman fiber laser by injection of modulated signal

A feasible approach is theoretically demonstrated that suppresses the relative intensity noise (RIN) transfer from pump sources to the proposed Raman fiber laser (RFL) output at the first-order Stokes line. The technique is accomplished by injecting a modulated signal at second-order Stokes shift from the pump wavelength according to the monitored RFL output, which indirectly consumes the pump power fluctuations and results in suppression of the RIN transfer to the RFL output. With the RFL used as a pump source for co-pumped Raman fiber amplifiers, further calculation results show that the Q-factor penalty due to RIN transfer can be dramatically reduced.