软段结构对聚氨酯性能影响的研究

用熔融缩聚法俣成了己二酸系和己二酸／芳香二酸混合系两个系列的聚酯；同溶液一步法将部分聚酯与ＭＤＩ反应，形成一系列聚酯型氨酯，以化学分析，ＶＰＯ，ＩＲ，ＤＳＣ，ＷＡＸＤ，力学拉伸等手段对聚酯和聚氨酯进行了表征；讨论了软段聚酯的结构对聚氨酯的结晶性，耐热性，粘结性等性能的影响。     

用DSC研究线形多嵌段聚氨酯与聚氯乙烯、氯化聚氯乙烯共混相容性

用示差扫描量热法（DSC）研究了线形多嵌段聚氨酯（PU）与聚氯乙烯（PVC）、氯化聚氯乙烯（CPVC）共混相容性，说明了PU／VC、PU／CPVC的相容是由于共混物中形成了新的氢键的缘故．聚酯型聚氨酯与PVC、CPVC的相容性要好子聚酸型聚氨酯，CPVC与PU的相容性又要好于PVC．聚氨酯中硬段的引入不利于PU／PVC、PU／CPVC的相容性．     

含有二个聚醚软链段的聚醚聚酯嵌段共聚物的合成及其血液相容性的研究

本文报道了一类新的具有二种聚醚软链段(PTMGT和PEGT)和一种聚酯硬链段(PET)的混合聚醚-聚酯嵌段共聚物(MPEE)的合成和它的血液相容性,并与具有相同软、硬链段比及相同软链段组成比(PTMGT/PEGT)的二种聚醚聚酯嵌段共聚物(PTMGT-PET和PEGT-PET)的共混物(BPEE)的性质进行了比较,结果表明:(1)聚醚聚酯嵌段共聚物的血液相容性可以通过引入亲水性好的PEGT组分而得到提高;(2)在多数的组成比下,共聚型的MPEE具有比共混型的BPEE优良的血液相容性;(3)特定的组成比:PTMGT/PEGT=60/40(mol),共混型的BPEE:(60/40)呈现最好的血液相容性以及最佳的力学性质。研究中发现材料的微相分离结构同血液相容性有关,细微的相分离结构可导致优良的血液相容性。     

抗凝血聚氨酯材料的研究进展

聚氨酯由于其优良的抗凝血性能和良好的物理机械性能而成为目前研究和应用最广的一种生物医用高分子材料。本文就嵌段型聚氨酯、拦枝型聚氨酯、离子型聚氨酯及其它具有良好发展前景的聚氨酯抗凝血材料的研究进展作扼要综述。     

含有二个聚醚软链段的聚醚聚酯嵌段共聚物的合成及其血液相容性的研究

 本文报道了一类新的具有二种聚醚软链段(PTMGT和PEGT)和一种聚酯硬链段(PET)的混合聚醚-聚酯嵌段共聚物(MPEE)的合成和它的血液相容性,并与具有相同软、硬链段比及相同软链段组成比(PTMGT/PEGT)的二种聚醚聚酯嵌段共聚物(PTMGT-PET和PEGT-PET)的共混物(BPEE)的性质进行了比较,结果表明:(1)聚醚聚酯嵌段共聚物的血液相容性可以通过引入亲水性好的PEGT组分而得到提高;(2)在多数的组成比下,共聚型的MPEE具有比共混型的BPEE优良的血液相容性;(3)特定的组成比:PTMGT/PEGT=60/40(mol),共混型的BPEE:(60/40)呈现最好的血液相容性以及最佳的力学性质。研究中发现材料的微相分离结构同血液相容性有关,细微的相分离结构可导致优良的血液相容性。     

三氟化硼引发四氢呋喃聚合的研究——以环氧氯丙烷为促进剂

<正> 四氢呋喃(THF)通过正离子开环聚合而制得的聚丁二醇(PTMG)是生产嵌段聚醚聚氨酯及嵌段聚醚聚酯弹性材料的重要原料。目前制备PTMG所采用的引发剂都是强酸型的,如高氯酸、氟磺酸或发烟硫酸等,对设备腐蚀严重。用酸性较弱的三氟化硼引发聚合在文献上也有一些研究报道,但尚难以采用,其主要困难在于实际应用的     

热致性液晶嵌段共聚酯的合成及表征

以对羟基苯甲酸甲酯和乙二醇为原料，通过熔融酯交换反应合成中间体（Ⅰ）：双（对一羟基苯甲酸）乙二醇酯．用溶液缩合法合成了三种不同嵌段长度的液晶嵌段共聚酯（Ｐ２４７、Ｐ２７７、Ｐ２７４）作为液晶聚合物与热塑性聚合物的“增容剂”．ＦＴＩＲ，Ｈ ＮＭＲ分析表明，嵌段共聚酯的结构和组成与分子设计基本相符；偏光显微镜证实，嵌段共聚酯在一定温度范围内为热致性向列型液晶，在较低温度为均相，在较高温度为两相结构．     

不同软段结构聚氨酯-酰亚胺嵌段共聚物的合成及热性能研究

用二步法合成了不同软段 (PPO ,PEG ,PEPA)聚氨酯 酰亚胺 (PUI)嵌段共聚物 ,FTIR光谱表征了所有合成PUI分子主链均含有酰亚胺链段 ,并研究了PUI嵌段共聚物的热性能受软段类型及长度的影响 .DSC研究表明聚酯型PUI的软硬段之间的相容性比聚醚型PUI好 ,随相同软段分子量的增加 ,PUI体系的软硬段兼容性变差 ,并显示了相分离的特征 ;热失重 (TGA)研究得出不同软段的PUI样品的热稳定性大小顺序为 :PEPA PUI >PEG PUI>PPO PUI ;动态力学 (DMTA)研究给出了所合成的PUI样品在 5 0～ 2 0 0℃范围内均出现了较长的模量平台显示出有较好的耐热性 ,且随硬段含量的升高其储能模量不断增强     

主链型液晶聚硅氧烷聚氨酯的合成及性质

合成了主链型联苯类及氧化偶氯苯类液晶聚硅氧烷聚氨酯弹性体，采用红外光谱，示差扫描量热，动态粘弹谱及带热台偏光显微镜等方法对聚合物进行了表征，讨论了它们的结构与性能．研究结果表明，这一系列多嵌段聚氨酯多数是向列型的液晶高分子聚合物，液晶相的形成同嵌段聚氨酯样品的软硬段相互作用有着密切的联系     

嵌段聚酯型聚脲氨酯弹性体的动态力学性能

聚氨酯(PU)的微区结构和宏观力学性能之间的关系是PU的一个重要课题。本文用动态力学方法对基于4,4'-二苯基甲烷二异氰酸酯(MDI),乙二胺(ED)和聚已二酸丁二醇酯(PBA)的嵌段聚酯型聚脲氨酯(PUU)弹性体进行了研究,探讨了不同软段分子量和硬段     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.