Models for the biological production of glycerol and biosurfactants from potato-processing industry residuals

Applied Biochemistry and Biotechnology -     

Biosynthesis and characterization of gold nanoparticles produced by laccase from Paraconiothyrium variabile

During recent years investigation on the development of eco-friendly processes for production of gold nanoparticles (GNPs) have received much attention due to hazardous effects of chemical compounds used for nanoparticle preparation. In the present study, the purified laccase from Paraconiothyrium variabile was applied for synthesis of Au nanoparticles (AuNPs) and the properties of produced nanoparticles were characterized. The UV-vis spectrum of formed AuNPs showed a peak at 530 nm related to surface plasmon absorbance of GNPs represented the formation of gold nanoparticles after 20 min incubation of HAuCl(4) (0.6 mM) in the presence of 73 U laccase at 70°C. Transmission electron microscopy (TEM) image of AuNPs showed well dispersed nanoparticles in the range of 71-266 nm as determined by the laser light scattering method. The pattern of energy dispersive X-ray (EDX) of the prepared GNPs confirmed the structure of gold nanocrystals.     

Adsorption on stainless steel surfaces of biosurfactants produced by gram-negative and gram-positive bacteria: Consequence on the bioadhesive behavior of Listeria monocytogenes

The ability of adsorbed biosurfactants (Pf and Lb) obtained from gram-negative bacterium (Pseudomonas fluorescens) or gram-positive bacterium (Lactobacillus helveticus) to inhibit adhesion of four listerial strains to stainless steel was investigated. These metallic surfaces were characterized using the following complementary analytical techniques: contact-angle measurements (CAM), atomic force microscopy (AFM), polarization modulation-infrared reflection-adsorption spectroscopy (PM-IRRAS) and X-ray photoelectron spectroscopy (XPS). Contact-angles with polar liquids (water and formamide) indicated that the stainless steel surface covered with adsorbed biosurfactant was more hydrophilic and electron-donating than bare stainless steel. The surface characterization by XPS and PM-IRRAS revealed that conditioning the stainless steel changes the substrate in two ways, by modifying the surface alloy composition and by leaving an thin adsorbed organic layer. AFM observations enabled to say that the layer covered entirely the surface and was probably thicker (with patches) in the case of Pf-conditioned surfaces compared to the Lb-conditioned ones, which seemed to be less homogeneous. Though the added layer was thin, significant chemical changes were observed that can account for drastic modifications in the surface adhesive properties. As a matter of fact, adhesion tests showed that both used biosurfactants were effective by decreasing strongly the level of contamination of stainless steel surfaces by the four strains of Listeria monocytogenes. The more important decrease concerned the CIP104794 and CIP103573 strains (>99.7%) on surface conditioned by L. helveticus biosurfactant. A less reduced phenomenon (75.2%) for the CIP103574 strain on stainless steel with absorbed biosurfactant from P. fluorescens was observed. Whatever the strain of L. monocytogenes and the biosurfactant used, this antiadhesive biologic coating reduced both total adhering flora and viable and cultivable adherent bacteria on stainless steel surfaces. This study confirms that biosurfactants constitute an effective strategy to prevent microbial colonization of metallic surfaces by pathogenic bacteria like the food-borne pathogen L. monocytogenes.     

Spectroscopic characterization of mineral crystals produced by the bacterium Azospirillum brasilense

The results of spectroscopic structural and trace elemental analyses of mineral crystals produced by the soil nitrogen-fixing bacterium Azospirillum brasilense cultivated in a synthetic medium are presented and discussed. The mineral formed is shown to have a structure close to struvite (MgNH(4)PO(4) x 6H(2)O; ASTM file No. 15-762) with some differences which may be attributed to the presence of isomorphic admixtures of other cations (struvite is known to have a variety of forms). AAS/AES and ion chromatography analyses for a number of biologically important microelements and their role in the formation of the crystal structure, as well as some questions related to biomineralization are also discussed.     

Contribution to the analytical characterization of coatings produced by thermal spraying

This paper reports on the use of Auger electron spectroscopy (AES)/ depth profile analysis for the investigation of plasma-sprayed coatings. Prior to spraying the St 37 substrates are heated to 300 °C or 500 °C for ceramic or metallic layers, respectively. Studies of the starting materials and of the interfaces are important if the adhesion mechanism is to be understood. Therefore the initial components—the unheated and heated substrates and the powder particles NiCrAl, Al₂O₃ and ZrO₂-7.25Y₂O₃—are analyzed. Depth profiles obtained from two coatings St 37/NiCrAl and St 37/Al₂O₃ show the influence of plasmaspraying on substrate surfaces and sprayed particles. Plasma-spraying mainly causes a decrease of superficial carbon contamination for both coating layers. In the case of St 37/NiCrAl incorporation of carbon in the sprayed layer is observed. The whole layer is almost completely oxidized except for some areas where substrate and particle material are present. It is assumed that these areas are identical with so-called adherence zones.Dedicated to Professor Günther Tölg on the occasion of his 60th birthday     

LC/ESI‐MS/MS characterisation of lipopeptide biosurfactants produced by the Bacillus licheniformis V9T14 strain

Lipopeptide biosurfactants produced by the Bacillus licheniformis V9T14 strain showed an interesting anti‐adhesion activity against biofilm formation of human pathogenic bacterial strains. The chemical characterisation of the crude extract of V9T14 strain was first developed through electrospray ionisation mass spectrometry (ESI‐MS) and ESI‐MS/MS direct infusions: two sets of molecular ion species belonging to the fengycin and surfactin families were revealed and their structures defined, interpreting their product ion spectra. The LC/ESI‐MS analysis of the crude extract allowed to separate in different chromatogram ranges the homologues and the isoforms of the two lipopeptide families. The extract was then fractionated by silica gel chromatography in two main fractions, I and II. The purified biosurfactants were analysed through a new, rapid and suitable LC/ESI‐MS/MS method, which allowed characterising the composition and the structures of the produced lipopeptides. LC/ESI‐MS/MS analysis of fraction I showed the presence of C₁₃, C₁₄ and C₁₅ surfactin homologues, whose structures were confirmed by the product ion spectra of the sodiated molecules [M + Na]⁺ at m/z 1030, 1044 and 1058. LC/ESI‐MS/MS analysis of fraction II confirmed the presence of two main fengycin isoforms, with the protonated molecules [M + H]⁺ at m/z 1478 and 1506 corresponding to C₁₇ fengycin A and C₁₇ fengycin B, respectively. Other homologues (C₁₄ to C₁₆) were revealed and confirmed as belonging to fengycin A or B according to the retention times and the product ions generated, although with the same nominal mass. Finally, a relative percentage content of each homologue for both lipopeptides families in the whole extract was proposed. Copyright © 2010 John Wiley & Sons, Ltd.     

Removal of natural uranium from water produced in the oil industry using Algerian bentonite

Batch sorption experiments have been carried out to remove natural uranium (NORM) from water obtained together with crude oil and natural gas, using Algerian bentonites. The effect of some important factors such as S/L ratio, pH, initial concentration, particle size was evaluated and a kinetic study performed. The value of the distribution coefficient (K _d) at equilibrium for natural uranium varied from 30 to 600 cm³·g⁻¹ and 50 to 1100 cm³·g⁻¹ (∼10% margin error) using natural bentonite and drilling bentonite, respectively. The isotherms showed that the data are consistent with both Freundlich and Langmuir models.     

Isotopomer analysis of lipid biosynthesis by high resolution mass spectrometry and NMR

We have coupled 2D-NMR and infusion FT-ICR-MS with computer-assisted assignment to profile ¹³C-isotopologues of glycerophospholipids (GPL) directly in crude cell extracts, resulting in very high information throughput of >3000 isobaric molecules in a few minutes. A mass accuracy of better than 1 ppm combined with a resolution of 100,000 at the measured m/z was required to distinguish isotopomers from other GPL structures. Isotopologue analysis of GPLs extracted from LCC2 breast cancer cells grown on [U-¹³C]-glucose provided a rich trove of information about the biosynthesis and turnover of the GPLs. The isotopologue intensity ratios from the FT-ICR-MS were accurate to ≈1% or better based on natural abundance background, and depended on the signal-to-nose ratio. The time course of incorporation of ¹³C from [U-¹³C]-glucose into a particular phosphatidylcholine was analyzed in detail, to provide a quantitative measure of the sizes of glycerol, acetyl CoA and total GPL pools in growing LCC2 cells. Independent and complementary analysis of the positional ¹³C enrichment in the glycerol and fatty acyl chains obtained from high resolution 2D NMR was used to verify key aspects of the model. This technology enables simple and rapid sample preparation, has rapid analysis, and is generally applicable to unfractionated GPLs of almost any head group, and to mixtures of other classes of metabolites.     

Analytical characterization of wine and its precursors by capillary electrophoresis

The accurate determination of marker chemical species in grape, musts, and wines presents a unique analytical challenge with high impact on diverse areas of knowledge such as health, plant physiology, and economy. Capillary electromigration techniques have emerged as a powerful tool, allowing the separation and identification of highly polar compounds that cannot be easily separated by traditional HPLC methods, providing complementary information and permitting the simultaneous analysis of analytes with different nature in a single run. The main advantage of CE over traditional methods for wine analysis is that in most cases samples require no treatment other than filtration. The purpose of this article is to present a revision on capillary electromigration methods applied to the analysis of wine and its precursors over the last decade. The current state of the art of the topic is evaluated, with special emphasis on the natural compounds that have allowed wine to be considered as a functional food. The most representative revised compounds are phenolic compounds, amino acids, proteins, elemental species, mycotoxins, and organic acids. Finally, a discussion on future trends of the role of capillary electrophoresis in the field of analytical characterization of wines for routine analysis, wine classification, as well as multidisciplinary aspects of the so-called "from soil to glass" chain is presented.     

Isolation and partial characterization of a biosurfactant mixture produced by Sphingobacterium sp. isolated from soil

The concentration decay curves for the adsorption of phenol on organobentonite were obtained in an agitated tank batch adsorber. The experimental adsorption rate data were interpreted with diffusional models as well as first-order, second-order and Langmuir kinetic models. The surface diffusion model adjusted the data quite well, revealing that the overall rate of adsorption was controlled by surface diffusion. Furthermore, the surface diffusion coefficient increased raising the mass of phenol adsorbed at equilibrium and was independent of the particle diameter in the range 0.042-0.0126 cm. It was demonstrated that the overall rate of adsorption was essentially not affected by the external mass transfer. The second-order and the Langmuir kinetic models fitted the experimental data quite well; however, the kinetic constants of both models varied without any physical meaning while increasing the particle size and the mass of phenol adsorbed at equilibrium.     

Spectroscopic characterization of mineral crystals produced by the bacterium Azospirillum brasilense

The results of spectroscopic structural and trace elemental analyses of mineral crystals produced by the soil nitrogen-fixing bacterium Azospirillum brasilense cultivated in a synthetic medium are presented and discussed. The mineral formed is shown to have a structure close to struvite (MgNH₄PO₄ × 6H₂O; ASTM file No. 15-762) with some differences which may be attributed to the presence of isomorphic admixtures of other cations (struvite is known to have a variety of forms). AAS/AES and ion chromatography analyses for a number of biologically important microelements and their role in the formation of the crystal structure, as well as some questions related to biomineralization are also discussed.     

Unusual enniatins produced by the insect pathogenic fungus Verticillium hemipterigenum: isolation and studies on precursor-directed biosynthesis

Two new enniatins H (3) and I (4), whose substituents on 2-hydroxycarboxylic acid moieties were different from those of known compounds, were isolated, together with known enniatins B (1) and B₄ (2), from the insect pathogenic fungus Verticillium hemipterigenum BCC 1449. Structures of these compounds were elucidated by spectroscopic means. Studies on precursor-directed biosynthesis with strain BCC 1449 led to the production and identification of three analogs, enniatins G (5), C (6) and MK1688 (7), as well as the stereochemical elucidation of 3 and 4. Enniatins 1-7 were evaluated for their antiplasmodial and antimycobacterial activities.     

Thiamin biosynthesis in eukaryotes: characterization of the enzyme-bound product of thiazole synthase from Saccharomyces cerevisiae and its implications in thiazole biosynthesis

The biosynthesis of thiamin pyrophosphate in eukaryotes is different from the prokaryotic biosynthesis and is poorly understood to date. Only one thiazole biosynthetic gene has been identified (Thi4 in Saccharomyces cerevisiae). Here we report the identification and characterization of a Thi4-bound metabolite that consists of the ADP adduct of 5-(2-hydroxyethyl)-4-methylthiazole-2-carboxylic acid. The unexpected structure of this compound yields the first insights into the mechanism of thiamin thiazole biosynthesis in eukaryotes.     

Impedimetric characterization of the changes produced in the electrode–solution interface by bacterial attachment

This paper describes a new method for measuring the attachment of bacteria, specifically Escherichia coli on platinum electrodes using impedance spectroscopy. Impedance spectroscopy measurements showed that the double layer capacitance of the electrode was very sensitive both to the concentration of bacteria in the solution and to the attachment time. Impedance measurements of E. coli were compared with classical measurements of bacterial attachment on identical electrodes such as staining/microscopy and bacterial removal by sonication and plating onto agar. The relationship between the measured impedance of the electrode during attachment and the biophysical processes involved is discussed.     

Analytical characterization of polymers used in conservation and restoration by ATR-FTIR spectroscopy

In the last few decades many new polymers have been synthesized that are now being used in cultural heritage conservation. The physical and chemical properties and the long-term behaviors of these new polymers are determined by the chemical composition of the starting materials used in their synthesis along with the nature of the substances added to facilitate their production. The practical applications of these polymers depend on their composition and form (foam, film, sheets, pressure-sensitive adhesives, heat-seal adhesives, etc.). Some materials are used in restoration works and others for the exhibition, storage and transport of works of art. In all cases, it is absolutely necessary to know their compositions. Furthermore, many different materials that are manufactured for other objectives are also used for conservation and restoration. The technical information about the materials provided by the manufacturer is usually incomplete, so it is necessary to analytically characterize such materials. FTIR spectrometry is widely used for polymer identification, and, more recently, ATR–FTIR has been shown to give excellent results. This paper reports the ATR-FTIR analysis of samples of polymeric materials used in the conservation of artworks. These samples were examined directly in the solid material without sample preparation.     

Removal of uranium by the adsorbents produced from coffee residues

Large amounts of coffee residues contaminate the environment and reprocessing of them as valuable products such as adsorbents will be a good solution from an environmental and economic point of view. In this study some adsorbents were produced from coffee residues and used for batch removal experiments of uranium from aqueous solutions. The adsorption kinetics was found to follow the Lagergren equation. The adsorption process was described with the Langmuir and Freundlich isotherms. Additionally, the effect of different cations on the adsorption of uranium was studied.