Analysis of dideoxyadenosine triphosphate by CE with fluorescence detection. I. Derivatization through the phosphate group

A CZE method was developed, which separates 2',3'-dideoxyadenosine-5'-triphosphate (ddATP) from other metabolites and endogenous nucleotides at high concentrations (20-200 microg/mL) to allow UV detection. To enhance sensitivity, fluorescence detection which requires prior derivatization of compounds was examined. Precapillary derivatization of ddATP in the presence of N-(3-dimethylaminopropyl)-N'-ethylcarbodiimide hydrochloride (EDAC) with dansyl ethylenediamine (dansyl EDA) was faster and stable compared to that of 4,4-difluoro-5,7-dimethyl-4-bora-3a,4a-diaza-s-indacene-3-propionyl ethylenediamine (BODIPY FL EDA). Reaction conditions, reagent concentrations and detection parameters were optimized and highest derivatization efficiency was achieved in 0.1 M 1-methylimidazole buffer (pH 8.0) with 140 mM EDAC in 1-methylimidazole buffer and 30 mM dansyl EDA in DMF for 90 min at 60 degrees C. Dansyl EDA derivatives of ddATP, 2'-deoxyadenosine-5'-triphosphate (dATP) and ATP were comigrating with the CZE method; therefore, a MEKC method was developed and optimized for repeatable separations. Upon dansylation, sensitivity of ddATP with fluorescence detection (LOQ = 12 ng/mL) was 160 times higher than UV detection (LOQ = 1.9 microg/mL).     

Simultaneous determination of deoxycytidine diphosphate and deoxycytidine triphosphate by capillary electrophoresis with transient isotachophoretic stacking: a sensitive monitoring method for ribonucleotide reductase activity

A simple and rapid capillary electrophoretic method was developed for simultaneous determination of sub‐micromolar 2′‐deoxycytidine 5′‐diphosphate (dCDP) and 2′‐deoxycytidine 5′‐triphosphate (dCTP) levels in enzyme assays without using radioactively labeled substrates. The separation was performed at 25°C using MES in the BGE as the terminating ion, the chloride ions in the sample buffer as the leading ion, and PEG 4000 in the BGE as the EOF suppressor for sample stacking by transient isotachophoresis (tITP). Several parameters affecting the separation were investigated, including the pH of the BGE, the concentration of sodium chloride in the sample buffer, and the concentrations of MES and PEG 4000 in the running buffer. Good separation with high separation efficiency was achieved within 6 min under optimal conditions. In comparison with the simple CZE method, the present tITP‐CZE method enabled a 150‐fold increase in the injection time without any decrease in resolution and the sensitivity was enhanced up to two orders of magnitude with the new method. The linear range of the method was 0.1–10 μM for dCDP and dCTP. The limits of detection of dCDP and dCTP were 85 and 73 nM, respectively. The proposed method was successfully applied for the activity assay of ribonucleotide reductase from Hep G2 and Sf9 cells.     

Sensitive amperometric detection for capillary electrophoresis of phenol carbamates with in‐line thermal hydrolysis strategy

A strategy on amperometric detection for CZE of phenol carbamates as model analytes with a facile in‐line thermal hydrolysis was presented, in which a thermal hydrolysis, subsequent CZE separation and final column‐end amperometric detection were accomplished in an intact capillary. Key parameters of hydrolysis dynamics of carbamates and electrochemical detection of the hydrolysates were studied, as well as electrophoretic conditions. Under the optimal conditions, the capillary was utilized as chambers for in situ hydrolysis, CZE separation, and electrochemical detection. The successive separation of hydrolysates of five carbamates (propoxur, carbofuran, 3‐OH‐carbofuran, carbaryl and bendiocarb) were achieved within 17 min. Applied to vegetable samples, the recoveries of carbamates fortified at 0.02 and 0.05 mg/kg were ranging in 88–107.2 and 86.3–107.3%, respectively. The success in the implementation of such a scheme resulted in a simple instrument as compared with those current analytical methods with post‐column derivization or pre‐column hydrolysis, or online enrichment in chip, respectively. This protocol might possess a potential utility for the sensitive amperometric detection of phenol carbamates.     

Quantitative analysis of hindered amine light stabilizers by CZE with UV detection and quadrupole TOF mass spectrometric detection

The current work describes the development of a CZE method with quadrupole QTOF‐MS detection and UV detection for the quantitation of Cyasorb 3529, a common hindered amine light stabilizer (HALS), in polymer materials. Analysis of real polymer samples revealed that the oligomer composition of Cyasorb 3529 changes during processing, a fact hampering the development of a straightforward method for quantitation based on calibration with a Cyasorb 3529 standard. To overcome this obstacle in‐depth investigations of the oligomer composition of this HALS using QTOF‐MS and QTOF‐MS/MS had to be performed whereby 22 new oligomer structures, in addition to the ten structures already described, were identified. Finally, a CZE method for quantitative analysis of this HALS was developed starting with a comprehensive characterization of a Cyasorb 3529 standard using CZE‐QTOF‐MS, subsequently allowing the correct assignment of most Cyasorb 3529 oligomers in an electropherogram with UV detection. Employing the latter detection technique and hexamethyl‐melamine as internal standard, peak areas obtained for the melamine could be correlated with those from the triazine ring, the UV‐absorbing unit present in the HALS. This approach finally allowed proper quantitation of the single oligomers of Cyasorb 3529, an imperative for the quantitative assessment of this HALS in real polymer samples.     

Separation and determination of enkephalin-related peptides using capillary electrophoresis

CZE with UV-absorption detection has been used for the separation and determination of enkephalin-related peptides. The experimental conditions, such as pH and concentration of running buffer, applied voltage, injection method, and time, were investigated in detail. Excellent separation efficiency could be obtained for ten enkephalin-related peptides with a 50 microm (ID) x 58 cm capillary using sodium dihydrogen phosphate as the running buffer (pH 3.11) when 20 kV of applied voltage was used. The concentration detection limits were found to be in the range of 0.31-1.94 microg/mL (defined as S/N = 3). The proposed method has been applied to analyze the spiked cerebrospinal fluid (CSF) sample, and the results showed that CZE is a powerful technique for separation and detection of the above biological peptides.     

DNA fragment separations by on‐line combination of capillary isotachophoresis–capillary zone electrophoresis with UV detection

A high‐speed DNA fragment separation system based on an on‐line combination of capillary ITP with CZE (CITP‐CZE) and using UV detection at 260 nm was developed. A novel CITP‐CZE buffer system of pH 6.1 was designed for the separation of ten DNA fragments with sizes ranging from 100 to 1000 bp. An effect of underivatized α‐, β‐ and γ‐cyclodextrins on the resolution of DNA fragments in the CZE step of the CITP‐CZE combination was systematically investigated. Methylhydroxyethylcellulose present in the BGE was used to eliminate the EOF. DNA ladder fragments were separated within 10 min with LODs in the range of 1–5 ng/μL (S/N = 3). The RSDs of the migration time and peak area of individual DNA fragments were in the range of 1–3 and 3–9%, respectively. The developed CITP‐CZE system was further applied to the analysis of digest plasmid DNA samples.     

A study of interactions between bacteria and antibiotics by capillary electrophoresis

To assess the bacteria–antibiotic interactions in patients with postoperative wound infections, a simple electrophoretic test was performed. To estimate the effectiveness of the antibiotic therapy and to prepare 3‐day profiles of bacteria “quantity” in biological samples, CE was used. As our team demonstrated earlier, the method is easy and fast, sample pretreatment is not necessary, and it is characterized by high selectivity. Finally, the statistically optimal and significant results of the CZE test analysis for detection of Escherichia coli cells was established for migration time lower than 3.5 min. The obtained sensitivity and specificity amounted to 89.5 and 100%, respectively. It is the first application of CZE in the study of medical therapy.     

Separation and determination of ephedrine and pseudoephedrine in Ephedrae Herba by CZE modified with a Cu(II)-L-lysine complex

A CZE method using a complex of 2.5 mM Cu(II)-L-lysine (molar ratio is 1:2) as additive in a run buffer solution composed of Tris-H(3)PO(4) (pH 4.5) was developed for the simultaneous determination of ephedrine and pseudoephedrine within 4 min. The effects of pH, composition, and concentration of run buffer as well as the composition and concentration of the Cu(II)-L-lysine complex on the separation were investigated. The linear ranges for the determination of ephedrine and pseudoephedrine were 15.0-225.0 and 20.0-250.0 mg/L with LODs both of 5.0 mg/L. Satisfactory result for the determination of ephedrine and pseudoephedrine in Ephedrae Herba from different producing area was obtained by the proposed method. Ephedrine and pseudoephedrine were separated effectively with each other and with the other compounds in the sample. The RSD for the determination of the two constituents in the samples varied from 1.82 to 2.76%, and the recovery ranged between 95.0 and 104.0%.     

Capillary zone electrophoresis tandem mass spectrometry detects low concentration host cell impurities in monoclonal antibodies

We have evaluated CZE‐ESI‐MS/MS for detection of trace amounts of host cell protein impurities in recombinant therapeutics. Compared to previously published procedures, we have optimized the buffer pH used in the formation of a pH junction to increase injection volume. We also prepared a 5‐point calibration curve by spiking 12 standard proteins into a solution of a human mAb. A custom CZE‐MS/MS system was used to analyze the tryptic digest of this mixture without depletion of the antibody. CZE generated a ～70‐min separation window (～90‐min total analysis duration) and ～300‐peak capacity. We also analyzed the sample using ultra‐performance LC‐MS/MS. CZE‐MS/MS generated approximately five times higher base peak intensity and more peptide identifications for low‐level spiked proteins. Both methods detected all proteins spiked at ～100 ppm level with respect to the antibody.     

Analysis of cyanobacterial toxins (anatoxin-a, cylindrospermopsin, microcystin-LR) by capillary electrophoresis

Capillary zone electrophoresis (CZE) and micellar electrokinetic chromatography (MEKC) were applied to the simultaneous separation of cyanobacterial toxins (anatoxin-a, microcystin-LR, cylindrospermopsin). The analytical performance data of both methods, optimized for the three toxins, were similar with a precision of migration times smaller than 0.8 RSD% and a detection limit in the range of 1-4 microg/mL, using spectrophotometric detection at 230 nm. Both methods were applied to an analysis of cyanotoxins in water bloom samples and crude cyanobacterial extracts. The results obtained indicate that, for complex matrices, the sequential application of CZE and MEKC is necessary. It is recommended to use both CE techniques for the analysis of the same sample in order to confirm the results by an orthogonal approach.     

Online preconcentration and two‐dimensional separation of cationic compounds via hyphenation of capillary zone electrophoresis with cyclodextrin‐modified micellar electrokinetic capillary chromatography

A novel preconcentration/separation approach, which online combined CZE with CD‐modified MEKC, was developed for simultaneous enhancing resolving power and detection sensitivity. CZE with cation‐selective exhaustive injection and transient ITP preconcentration was used as the first dimension, from which the effluent fractions were further analyzed by CD‐modified MEKC acting as the second dimension. As the key to successful integration of CZE with MEKC, a new interface was designed and electroaccumulation focusing strategy was employed to avoid analyte band diffusion at the interface. The comprehensive 2‐D system was successfully established with only one high voltage and four electrodes. The grouping of two orthogonal separation techniques, together with analytes preconcentration techniques, significantly enhanced resolution and sensitivity for 2‐D separation of cationic compounds. The resulting electrophoregram was quite different from that of either single CZE or MEKC. Up to 14 000‐ to 35 000‐fold improvement in sensitivity was obtained relative to conventional electrokinetic injection method. The limits of detection (S/N=3) were in the range of 0.03–0.1 μg/L. The number of theoretical plates was in the range of 103 000–184 000. This method was successfully applied to the analysis of trace cationic cardiovascular drugs in wastewater.     

Fiber optic Z-cell for CZE

Fiber optic Z-cell for CZE was designed, constructed, tested and compared with on-column detection. Ten times higher sensitivity for Z-cell in comparison with on-column detection was achieved as expected from optical pathlength ratio. Linear dynamic range was > 4 orders of magnitude for both cells.     

Determination of (E)-10-hydroxy-2-decenoic acid content in pure royal jelly: a comparison between a new CZE method and HPLC

A new CZE method was developed and compared with HPLC for the determination of (E)-10-hydroxy-2-decenoic acid (10-HDA) in royal jelly (RJ) samples of different geographical origin. The results obtained with the CZE method were highly correlated with those of HPLC (p < 0.01). Under optimized conditions, CZE employed minimal amounts of 50 mM tetraborate buffer as BGE, without the addition of organic solvents, EOF or pH modifiers. The CZE method showed a wide linear response range (0.006-0.808 mg 10-HDA/mL), a good sensitivity (LOD and LOQ were 0.002 and 0.004 mg/mL, respectively) and a satisfactory instrumental repeatability with respect to migration time and peak area (RSD% less than 1.0 and 2.0% on migration time for intra- and interday assay, respectively and less than 2.0 and for 4.0% on peak area for intra- and interday assay, respectively). The 10-HDA content in RJ ranged from 0.8 to 3.2 g/100 g of RJ and a significant difference (p < 0.05) was found between the Italian and extra-European average values: 2.5 and 1.6 g/100 g of RJ, respectively, according to the CZE data. The possibility of application of CZE for routine analyses on RJ and RJ based products to verify their authenticity is highlighted here.     

Heart‐cut nano‐LC–CZE–MS for the characterization of proteins on the intact level

Multidimensional separation techniques play an increasingly important role in separation science, especially for the analysis of complex samples such as proteins. The combination of reversed‐phase liquid chromatography in the nanoscale and CZE is especially beneficial due to their nearly orthogonal separation mechanism and well‐suited geometries/dimensions. Here, a heart‐cut nano‐LC–CZE–MS setup was developed utilizing for the first time a mechanical 4‐port valve as LC–CE interface. A model protein mixture containing four different protein species was first separated by nano LC followed by a heart‐cut transfer of individual LC peaks and subsequent CZE–MS analysis. In the CZE dimension, various glycoforms of one protein species were separated. Improved separation capabilities were achieved compared to the 1D methods, which was exemplarily shown for ribonuclease B and its different glycosylated forms. LODs in the lower μg/mL range were determined, which are considerably lower compared to traditional CZE–MS. In addition, this study represents the first application of an LC–CE–MS system for intact protein analysis. The nano‐LC–CZE–MS system is expected to be applicable to various other analytical challenges.     

Determination of eight illegal drugs in human urine by combination of magnetic solid‐phase extraction with capillary zone electrophoresis

Using magnetite/silica/poly(methacrylic acid‐co‐ethylene glycol dimethacrylate) (Fe₃O₄/SiO₂/poly(MAA‐co‐EDMA)) magnetic microspheres, a rapid and high‐throughput magnetic solid‐phase extraction coupled with capillary zone electrophoresis (MSPE‐CZE) method was developed for the determination of illegal drugs (ketamine, amphetamines, opiates, and metabolites). The MSPE of target analytes could be completed within 2 min, and the eight target analytes could be baseline separated within 15 min by CZE with 30 mM phosphate buffer solution (PBS, pH 2.0) containing 15% v/v ACN as background electrolyte. Furthermore, hydrodynamic injection with field‐amplified sample stacking (FASS) was employed to enhance the sensitivity of this MSPE‐CZE method. Under such optimal conditions, the limits of detection for the eight target analytes ranged from 0.015 to 0.105 μg/mL. The application feasibility of MSPE‐CZE in illegal drugs monitoring was demonstrated by analyzing urine samples, and the recoveries of target drugs for the spiked sample ranging from 85.4 to 110.1%. The method reproducibility was tested by evaluating the intra‐ and interday precisions, and relative standard deviations of <10.3 and 12.4%, respectively, were obtained. To increase throughput of the analysis, a home‐made MSPE array that has potential application to the treatment of 96 samples simultaneously was used.     

CZE separation of amitrol and triazine herbicides in environmental water samples with acid-assisted on-column preconcentration

A simple analytical scheme for the detection and quantification of amitrol and triazine herbicides (atrazine, ametryn and atraton) and degradation product (2‐hydroxyatrazine) in environmental water samples by CZE is reported. On‐column preconcentration of analytes from untreated water samples (mineral, spring, tap and river water) is accomplished by introducing an acid plug (200 mM citrate of pH 2.0) after the sample and then proceeding with the CZE separation, using 100 mM formiate buffer of pH 3.5 as running buffer and 25.0 KV as separation voltage. UV detection at 200 nm provides LODs from 50 to 300 nM in untreated samples and they were lowered tenfold by sample preconcentration by evaporation. Calculated recoveries were typically higher than 90%. Minimal detectable concentration of the electroactive amitrol could be decreased about 20‐fold when electrochemical detection was employed by monitoring the amperometric signal at +800 mV using a carbon paste electrode (LOD of 9.6 nM, 0.81 μg/L, versus 170 nM, 14.3 μg/L, using amperometric and UV detection, respectively) in untreated water samples.     

Qualitative and quantitative analysis of active flavonoids in Flos Lonicerae by capillary zone electrophoresis coupled with solid-phase extraction

Flavonoids are an important bioactive group in the commonly used herbal medicine Flos Lonicerae. A new method of capillary zone electrophoresis (CZE) coupled with solid-phase extraction (SPE) was developed for simultaneous assay of flavonoid aglycones and glycosides in Flos Lonicerae. Optimum CZE separation was achieved with a background electrolyte (BGE) solution consisting of 80 mM boric acid and 20 mM phosphate acid, adjusted to pH 8.1, with 15% acetonitrile (v/v) added, and applying a separation voltage of 28 kV. The SPE method was used for pretreating the complex matrix of botanical materials and good reproducibility was obtained when avicularin was used as internal standard. Linearity of the method was excellent with correlation coefficients (r2) in the range of 0.9995-0.9999 and detection limits were lower than 0.6 microg/mL for the four flavonoids. The obtained recoveries varied between 93 to 104% while the relative standard deviations (RSDs) were below 4.4% (n=3). The developed CZE method was successfully used for the separation of eight flavonoids and the quantification of the four flavonoids in five species of Flos Lonicerae.     

Rapid and sensitive determination of free thiols by capillary zone electrophoresis with near‐infrared laser‐induced fluorescence detection using a new BODIPY‐based probe as labeling reagent

A CZE with near‐infrared (NIR) LIF detection method has been developed for the analysis of six low molecular weight thiols including glutathione, homocysteine, cysteine, γ‐glutamylcysteine, cysteinylglycine, and N‐acetylcysteine. For this purpose, a new NIR fluorescent probe, 1,7‐dimethyl‐3,5‐distyryl‐8‐phenyl‐(4'‐iodoacetamido)difluoroboradiaza‐s‐indacene was utilized as the labeling reagent, whose excitation wavelength matches the commercially available NIR laser line of 635 nm. The optimum procedure included a derivatization step of the free thiols at 45°C for 25 min and CZE analysis conducted within 14 min in the running buffer containing 16 mmol/L pH 7.0 sodium citrate and 60% v/v ACN. The LODs (S/N = 3) ranged from 0.11 nmol/L for N‐acetylcysteine to 0.31 nmol/L for γ‐glutamylcysteine, which are better than or comparable to those reported with other derivatization‐based CE‐LIF methods. As the first trial of NIR CE‐LIF method for thiol determination, the practical application of the proposed method has been validated by detecting thiols in cucumber and tomato samples with recoveries of 96.5–104.3%.     

Cell activity analysis by capillary zone electrophoresis combined with specific cell staining

Capillary zone electrophoresis (CZE) was used to determine Hela cells activity with Hela treated by 0-46?μM methylmercury (MeHg) as the apoptosis model. The treated and untreated cells were stained by four different dyes (Janus Green B, Rhodamine 123, Neutral Red and Trypan Blue) and analyzed by CZE with UV/Vis detection. The absorbance of cells at 214?nm could indicate the degree of cell shrinkage and component leakage induced by MeHg. The intensity of cell absorbance at maximum visible absorption wavelength of dyes represented mitochondrial activity, lysosome phagocytosis ability and cell membrane integrity. For different concentrations of MeHg treatment, the change of cell activity was in good agreement with Janus Green B uptake colorimetric assay (R2 =0.914) and 3-(4, 5-dimethylthiazol-2-yl)-2, 5-di-phenyltetrazolium bromide (MTT) assay (R2 =0.892). 80% of RSD (n=3) values were in the range of 0.5-15.0%. The established CZE method could be used to analyze intact cells with only UV-Vis detector. The CZE method has some features equivalent to the existing universal method, and it has the potential to be a universal tool for cell activity determination.     

Determination of Naphthalenesulfonate Isomers in Industrial Effluents and River Water by Solid‐Phase Extraction and Capillary Zone Electrophoresis

This work presents a method to separate polar naphthalenesulfonate (NS) isomers by capillary zone electrophoresis (CZE) with ultraviolet detection in industrial effluents and river water samples. The method involves extraction of samples by a polystyrene‐divinylbenzene copolymer (PS‐DVB) solid‐phase extraction (SPE) cartridge. The most effective CZE separation conditions were obtained in 20 mM borate buffer with 30% acetonitrile at pH 9.0 and 30 °C. The method proposed herein provides a high precision and sensitivity for NS isomers, to quantitation at ≤ 1.0 μg/L in 200 mL of the water samples. Recovery of the NS isomers in spiked water samples ranged from 73% to 87% while RSD ranging from 5.6 to 9.7%. The analysis of industrial effluents and river water samples was performed and naphthalene‐2‐sulfonate was found as a major pollutant. The difficulties in quantitating and identifying analytes in complex environmental samples can be resolved by using an internal standard response factor to calculate concentrations and relative migration times for peak confirmation.