APPLICATION OF PENALTY FUNCTION METHOD IN ISOPARANIETRIC HYBRID FINITE ELEMENT ANALYSIS

IntroductionSince T.H.H.Pain firstly puts forward hybrid element method[1]in1964, the researchand application of hybrid element have got great development. T.H.H.Painet al.havemade important pioneer works in the domain of the research on incompatible displacementstructure hybrid elementstress pattern[2,3]in recentdecades. Reference [4] had provided theoptimizing design concept of hybrid element further and established standardization methodof incompatible displacement structure hybrid eleme…     

并行有限元网格生成方法及其应用

大型工程数值仿真中,在前处理阶段需要生成千万甚至亿量级的网格,传统的串行网格生成方法由于内存和时间的限制,难以处理如此规模的网格。针对此问题,本文提出了一种大规模网格并行生成方法。首先基于推进波前法对几何模型进行初始体网格划分,接着利用图论理论进行区域分解,并通过表面单元恢复保持其几何精度,然后通过分裂法进行网格的并行生成。将所述方法应用到实际大型工程数值仿真前处理阶段,结果表明所述方法可以获得较好的并行效率,同时所产生的网格质量可以满足后续计算需要。     

应用于弹性问题的重心有限元法

摘要：通过几何的方法构造了在任意多边形上的具有重心型格式的平均值插值函数,并利用Galerkin法提出了应用于弹性问题的重心有限元法。重心有限元法的插值函数在多边形单元间是协调的,能够方便的施加本质边界条件。重心有限元法的插值函数对于不同边数的多边形单元具有统一的表达形式,编程实现简便易行,能够方便的应用于复杂几何区域的求解。通过重心有限元法分别进行了小片试验、悬臂梁和复合材料的有效模量的数值模拟。小片试验的计算精度达到了机器精度;悬臂梁的计算结果与解析解的吻合程度较高;复合材料的有效模量的数值模拟结果与传统有限元和解析解吻合得较好,变化趋势合理。     

Variable penalty method for finite element analysis of incompressible flow

A new scheme is applied for increasing the accuracy of the penalty finite element method for incompressible flow by systematically varying from element to element the sign and magnitude of the penalty parameter λ, which enters through ?.v + p/λ = 0, an approximation to the incompressibility constraint. Not only is the error in this approximation reduced beyond that achievable with a constant λ, but also digital truncation error is lowered when it is aggravated by large variations in element size, a critical problem when the discretization must resolve thin boundary layers. The magnitude of the penalty parameter can be chosen smaller than when λ is constant, which also reduces digital truncation error; hence a shorter word-length computer is more likely to succeed. Error estimates of the method are reviewed. Boundary conditions which circumvent the hazards of aphysical pressure modes are catalogued for the finite element basis set chosen here. In order to compare performance, the variable penalty method is pitted against the conventional penalty method with constant λ in several Stokes flow case studies.     

饱和多孔介质中的混合有限元法和有限应变下应变局部化分析

对基于Biot理论的饱和多孔介质中动力-渗流耦合分析提出了一个耦合场混合元．固相位移、应变和有效应力以及流相压力、压力梯度和Darcy速度在单元内均处理为独立变量分别插值．基于胡海昌-Washizu三变量广义变分原理给出的饱和多孔介质动力-渗流耦合问题控制方程的单元弱形式，导出了单元公式．进一步导出了考虑压力相关非关联塑性的非线性单元公式和发展了相应的一致性算法．对几何非线性分析，采用了共旋公式途径．数值结果例题显示所发展耦合场混合元模拟大应变下由应变软化引起以应变局部化为特征的渐进破坏现象的性能．     

超级有限元法及其在结构工程中的应用

本文探讨一种基于半连续半离散思想，适用于复杂结构（如高层框架、剪力墙、桁架、网架等结构系统）工程分析的超级有限元，其结构数值分析是按连续体进行，但又按单个构件进行有限元计算。这种按整体系统进行离散所获得的单元内部包含众多构件，有别于一般常见的实体有限元，称为“超级有限元”。这种方法自由度数比一般有限元法少很多，又与单元内部所含构件数多少无关，并可求取结构内每个构件的内力值。     

Interval finite element method and its application on anti-slide stability analysis

The problem of interval correlation results in interval extension is discussed by the relationship of interval-valued functions and real-valued functions. The methods of reducing interval extension are given. Based on the ideas of the paper, the formulas of sub-interval perturbed finite element method based on the elements are given. The sub-interval amount is discussed and the approximate computation formula is given. At the same time, the computational precision is discussed and some measures of improving computational efficiency are given. Finally, based on sub-interval perturbed finite element method and anti-slide stability analysis method, the formula for computing the bounds of stability factor is given. It provides a basis for estimating and evaluating reasonably anti-slide stability of structures.     

广义扩展有限元法及其在裂纹扩展分析中的应用

结合广义有限元法(GFEM)和扩展有限元法(XFEM)的特点,提出了一种新的数值方法——广义扩展有限元法(GXFEM)。阐述了广义扩展有限元法的基本原理,对相关公式进行推导,探讨数值实施中需注意的重要问题,给出利用广义扩展有限元法进行断裂分析时应力强度因子的计算方法,编写了广义扩展有限元法程序。通过算例进行了应力强度因子的计算,模拟了结构裂纹的扩展过程。算例结果表明,利用广义扩展有限元法计算裂纹扩展问题,不需要进行过密的网格划分,且网格在裂纹扩展后无需重新剖分,具有相当高的计算精度。     

钢-混凝土混合框架结构多尺度分析及其建模方法

多尺度计算是保证计算精度的同时最大限度降低计算代价的有效途径,在众多学科领域和工程问题中都得到了应用.在结构有限元多尺度分析领域,要解决的一个关键问题是如何实现局部微观模型与宏观结构模型之间的共同工作.为实现精细有限元模型在植入宏观结构模型时不同尺度模型界面的变形协调,提出有限元微观模型与宏观模型的界面连接方法,给出了轴向、横向和转角的约束方程.通过编制用户子程序,使该方法在有限元软件中得以实现,并通过简单的圆柱筒算例,对界面连接的合理性进行了验证.最后基于多尺度建模方法和复杂混合结构节点的精细模型,给出了钢-混凝土混合框架结构多尺度弹塑性时程分析的应用实例,结果表明多尺度计算可较好模拟节点的复杂边界条件.本文建议的界面连接方法可有效实现不同尺度模型界面的变形协调,为工程结构进行多尺度提供了条件.     

离散元与壳体有限元结合的多尺度方法及其应用

在深入研究复杂结构和非均质材料冲击响应和破坏机理的过程中,往往遇到多尺度计算问题。本文尝试建立三维离散元与壳体有限元结合的多尺度方法用于处理圆柱壳问题,该方法采用三维离散元对感兴趣的局域进行局部模拟,利用平板壳体有限元进行整体模拟,采用一种特殊的过渡层使离散元区和有限元区能很好的衔接。我们将这一方法应用于激光辐照下充压柱壳的热/力耦合冲击破坏响应,得到的模拟结果与文献报道有较好的吻合。     

Mixed finite element method of hexahedral elements for Navier-Stokes problem

In this paper, we derive a new mixed element format of hexahedral elements for Navier-Stokes problem in three-dimensional space.     

The conjugate gradient method and block iterative method for penalty finite element of three dimensional navier-stokes equation

A conjugate gradient and block iterative algorithm for element solution of penalty variational form of Navier-Stokes equations are presented. Because the algorithm of solving single variable minimizing problem is simplified, the computing time is greatly saved. In this paper numerical examples are also provided.     

P-version hybrid analytical finite element method for plate bending problems

Two sets of trial functions with different variables are constructed for the admissible space of the finite element analysis. The trial functions satisfy the equilibrium differential equation inside elements, while the deflections and rotations on the edges of the elements are approximated by the Peano hierarchical interpolation functions. Then, a generalized variational principle is applied to set up the p-version hybrid analytical finite element method for plate bending problems. The accuracy of finite element computation can be improved by increasing the order of the interpolation polynomials with fixed mesh. In the finite element formulation, to obtain the stiffness matrices and the load vectors, it is only necessary to perform quadrature over the edges of the elements. These matrices and vectors possess an embedding structure. The conformability between the elements can be controlled automatically.This work is supported by the Natural Science Foundation of China and the Aeronautical Science Foundation of China.     

A weighted penalty finite element method for the analysis of power-law fluid flow problems

In this paper, a new finite element method for the flow analysis of the viscous incompressible power-law fluid is proposed by the use of penalty-hybrid/mixed finite element formulation and by the introduction of an alternative perturbation, which is weighted by viscosity, of the continuity equation. A numerical example is presented to exhibit the efficiency of the method.The Project Supported by the National Natural Science Foundation of China.     

非饱和多孔介质中热-渗流-力学耦合的混合元法

提出了一个非饱和多孔介质中热-渗流-力学耦合分析的混合有限元 方法. 固相位移、应变和净应力；孔隙水和气的压力、压力空间梯度和Darcy速度；多相混 合介质的温度、温度空间梯度和热流量在单元内均为独立变量分别插值. 基于胡海 昌-Washizu 三变量广义变分原理给出的多孔介质中热-渗流-力学耦合问题控制方程的单元弱形式，导 出了单元公式. 采用共旋公式进行几何非线性分析. 数值结果证明了所提出的单元模拟以 应变局部化为特征的渐进破坏的能力     

Mixed time discontinuous space-time finite element method for convection diffusion equations

A mixed time discontinuous space-time finite element scheme for secondorder convection diffusion problems is constructed and analyzed. Order of the equation is lowered by the mixed finite element method. The low order equation is discretized with a space-time finite element method, continuous in space but discontinuous in time. Stability, existence, uniqueness and convergence of the approximate solutions are proved. Numerical results are presented to illustrate efficiency of the proposed method.     

光滑粒子法与有限元的耦合算法及其在冲击动力学中的应用

扼要讨论了光滑粒子法的离散思想,充分利用光滑粒子法和有限元方法各自的优点,提出了一种初始时刻用有限元建模,计算过程中大变形单元自动转换为光滑粒子的耦合算法。高速碰撞的系列算例说明,耦合算法不但适宜于计算大变形冲击动力学问题,而且由于集两种方法的优点于一身,可以更高效地模拟一些高速碰撞问题,提高计算效率。     

Three‐dimensional simulation of planar contraction viscoelastic flow by penalty finite element method

The planar contraction flow is a benchmark problem for the numerical investigation of viscoelastic flow. The mathematical model of three‐dimensional viscoelastic fluids flow is established and the numerical simulation of its planar contraction flow is conducted by using the penalty finite element method with a differential Phan‐Thien–Tanner constitutive model. The discrete elastic viscous split stress formulation in cooperating with the inconsistent streamline upwind scheme is employed to improve the computation stability. The distributions of velocity and stress obtained by simulation are compared with that of Quinzani's experimental results detected by laser–doppler velocimetry and flow‐induced birefringence technologies. It shows that the numerical results agree well with the experimental results. The numerical methods proposed in the study can be well used to predict complex flow patterns of viscoelastic fluids. Copyright © 2009 John Wiley & Sons, Ltd.     

Hahn-Tsai复合材料的非线性杂交应力有限元方法

成功建立了Hahn-Tsai复合材料模型的非线性杂交应力有限元方程,采用Newton-Raphson迭代法求解结构的非线性位移方程。在迭代过程中,为了提高计算效率可采用简单迭代法由节点位移求解单元应力场。但是,当载荷增加到一定程度以后,非线性应力场由于循环迭代而无法收敛,显然,一般的加速方法不能解决这种循环迭代的发散问题。因此,本文发展了一种确实有效的非线性应力场迭代新方法,在不增加计算工作量的情况下,不仅极大地提高了收敛速度,而且对于较大载荷也能够很好地收敛,从而解决了大载荷下非线性杂交元方法失败的关键问题。数值算例表明该方法是确实可行的。