Isomerism in rhodium(I) N,S-donor heteroscorpionates: ring substituent and ancillary ligand effects

The heteroscorpionate ligands [HB(taz)(2)(pz(R))](-) (pz(R) = pz, pz(Me2), pz(Ph)) and [HB(taz)(pz)(2)](-), synthesised from the appropriate potassium hydrotris(pyrazolyl)borate salt and 4-ethyl-3-methyl-5-thioxo-1,2,4-triazole (Htaz), react with [{Rh(cod)(μ-Cl)}(2)] to give [Rh(cod)Tx] {Tx = HB(taz)(2)(pz), HB(taz)(2)(pz(Me2)), HB(taz)(2)(pz(Ph)), HB(taz)(pz)(2)}; the heteroscorpionate rhodaboratrane [Rh{B(taz)(2)(pz(Me2))}{HB(taz)(2)(pz(Me2))}] is the only isolable product from the reaction of [{Rh(nbd)(μ-Cl)}(2)] with K[HB(taz)(2)(pz(Me2))]. Carbonylation of the cod complexes gave a mixture of [Rh(CO)(2)Tx] and [(RhTx)(2)(μ-CO)(3)] which reacts with PR(3) to give [Rh(CO)(PR(3))Tx] (R = Cy, NMe(2), Ph, OPh). In the solid state the complexes are square planar with the particular structure dependent on the steric and/or electronic properties of the scorpionate and ancillary ligands. The complex [Rh(cod){HB(taz)(pz)(2)}] has the heteroscorpionate κ(2)[N(2)]-coordinated to rhodium with the B-H bond directed away from the rhodium square plane while [Rh(cod){HB(taz)(2)(pz(Me2))}] is κ(2)[SN]-coordinated, with the B-H bond directed towards the metal. The complexes [Rh(CO)(PPh(3)){HB(taz)(2)(pz)}] and [Rh(CO)(PPh(3)){HB(taz)(2)(pz(Me2))}] are also κ(2)[SN]-coordinated but with the pyrazolyl ring cis to PPh(3); in the former the B-H bond is directed towards rhodium while in the latter the ring is pseudo-parallel to the rhodium square plane, as also found for [Rh(CO)(2){HB(taz)(2)(pz(Me2))}]. The analogues [Rh(CO)(PR(3)){HB(taz)(2)(pz(Me2))}] (R = Cy, NMe(2)) have the phosphines trans to the pyrazolyl ring. Uniquely, [Rh(CO)(PPh(3)){HB(taz)(2)(pz(Ph))}] is κ(2)[S(2)]-coordinated. A qualitative mechanism is given for the rapid ring-exchange, and hence isomerisation, observed in solution.     

The synthesis, characterisation and reactivity of 2-phosphanylethylcyclopentadienyl complexes of cobalt, rhodium and iridium

2-Phosphanylethylcyclopentadienyl lithium compounds, Li[C(5)R'(4)(CH(2))(2)PR(2)] (R = Et, R' = H or Me, R = Ph, R' = Me), have been prepared from the reaction of spirohydrocarbons C(5)R'(4)(C(2)H(4)) with LiPR(2). C(5)Et(4)HSiMe(2)CH(2)PMe(2), was prepared from reaction of Li[C(5)Et(4)] with Me(2)SiCl(2) followed by Me(2)PCH(2)Li. The lithium salts were reacted with [RhCl(CO)(2)](2), [IrCl(CO)(3)] or [Co(2)(CO)(8)] to give [M(C(5)R'(4)(CH(2))(2)PR(2))(CO)] (M = Rh, R = Et, R' = H or Me, R = Ph, R' = Me; M = Ir or Co, R = Et, R' = Me), which have been fully characterised, in many cases crystallographically as monomers with coordination of the phosphorus atom and the cyclopentadienyl ring. The values of nu(CO) for these complexes are usually lower than those for the analogous complexes without the bridge between the cyclopentadienyl ring and the phosphine, the exception being [Rh(Cp'(CH(2))(2)PEt(2))(CO)] (Cp' = C(5)Me(4)), the most electron rich of the complexes. [Rh(C(5)Et(4)SiMe(2)CH(2)PMe(2))(CO)] may be a dimer. [Co(2)(CO)(8)] reacts with C(5)H(5)(CH(2))(2)PEt(2) or C(5)Et(4)HSiMe(2)CH(2)PMe(2) (L) to give binuclear complexes of the form [Co(2)(CO)(6)L(2)] with almost linear PCoCoP skeletons. [Rh(Cp'(CH(2))(2)PEt(2))(CO)] and [Rh(Cp'(CH(2))(2)PPh(2))(CO)] are active for methanol carbonylation at 150 degrees C and 27 bar CO, with the rate using [Rh(Cp'(CH(2))(2)PPh(2))(CO)] (0.81 mol dm(-3) h(-1)) being higher than that for [RhI(2)(CO)(2)](-) (0.64 mol dm(-3) h(-1)). The most electron rich complex, [Rh(Cp'(CH(2))(2)PEt(2))(CO)] (0.38 mol dm(-3) h(-1)) gave a comparable rate to [Cp*Rh(PEt(3))(CO)] (0.30 mol dm(-3) h(-1)), which was unstable towards oxidation of the phosphine. [Rh(Cp'(CH(2))(2)PEt(2))I(2)], which is inactive for methanol carbonylation, was isolated after the methanol carbonylation reaction using [Rh(Cp'(CH(2))(2)PEt(2))(CO)]. Neither of [M(Cp'(CH(2))(2)PEt(2))(CO)] (M = Co or Ir) was active for methanol carbonylation under these conditions, nor under many other conditions investigated, except that [Ir(Cp'(CH(2))(2)PEt(2))(CO)] showed some activity at higher temperature (190 degrees C), probably as a result of degradation to [IrI(2)(CO)(2)](-). [M(Cp'(CH(2))(2)PEt(2))(CO)] react with MeI to give [M(Cp'(CH(2))(2)PEt(2))(C(O)Me)I] (M = Co or Rh) or [Ir(Cp'(CH(2))(2)PEt(2))Me(CO)]I. The rates of oxidative addition of MeI to [Rh(C(5)H(4)(CH(2))(2)PEt(2))(CO)] and [Rh(Cp'(CH(2))(2)PPh(2))(CO)] are 62 and 1770 times faster than to [Cp*Rh(CO)(2)]. Methyl migration is slower, however. High pressure NMR studies show that [Co(Cp'(CH(2))(2)PEt(2))(CO)] and [Cp*Rh(PEt(3))(CO)] are unstable towards phosphine oxidation and/or quaternisation under methanol carbonylation conditions, but that [Rh(Cp'(CH(2))(2)PEt(2))(CO)] does not exhibit phosphine degradation, eventually producing inactive [Rh(Cp'(CH(2))(2)PEt(2))I(2)] at least under conditions of poor gas mixing. The observation of [Rh(Cp'(CH(2))(2)PEt(2))(C(O)Me)I] under methanol carbonylation conditions suggests that the rhodium centre has become so electron rich that reductive elimination of ethanoyl iodide has become rate determining for methanol carbonylation. In addition to the high electron density at rhodium.     

Synthesis and Reaction of [MnRe（CO）6（μ—SH）（μ—SC（H）PPr^i3）（PPh3）]

The synthesis,the crystal structure and the reaction of the hetero-binuclear complex[MnRe(CO)6(μ-SH）（μ-SC(H)PPr^i3)(PPh3)] are reported.The results of single crystal X-ray structure analysis showed that the fragments Mn(CO)3 and Re(CO)3 were bridged by SH and SC(H)PPr^i3.The title complexes can react with Bu^nLi and RX forming complexes MnRe(CO)6(μ-SR）（μ-SC(H)PPr^i3)(PPh3)](R=Me,CH2CH=CH2,SnBu3^n).     

Heteronuclear rhodium, palladium, platinum, and gold organoimido complexes from dinuclear organoamido rhodium precursors

Treatment of the organoamido complexes [Rh(2)(mu-4-HNC(6)H(4)Me)(2)(L(2))(2)] (L(2) = 1,5-cyclooctadiene (cod), L = CO) with nBuLi gave solutions of the organoimido species [Li(2)Rh(2)(mu-4-NC(6)H(4)Me)(2)(L(2))(2)]. Further reaction of [Li(2)Rh(2)(mu-4-NC(6)H(4)Me)(2)(cod)(2)] with [Rh(2)(mu-Cl)(2)(cod)(2)] afforded the neutral tetranuclear complex [Rh(4)(mu-4-NC(6)H(4)Me)(2)(cod)(4)] (2), which rationalizes the direct syntheses of 2 from [Rh(2)(mu-Cl)(2)(cod)(2)] and Li(2)NC(6)H(4)Me. Reactions of [Li(2)Rh(2)(mu-4-NC(6)H(4)Me)(2)(CO)(4)] with chloro complexes such as [Rh(2)(mu-Cl)(2)(CO)(4)], [MCl(2)(cod)] (M = Pd, Pt), and [Ru(2)(mu-Cl)(2)Cl(2)(p-cymene)(2)] afforded the homo- and heterotrinuclear complexes PPN[Rh(3)(mu-4-NC(6)H(4)Me)(2)(CO)(6)] (5; PPN=bis(triphenylphosphine)iminium), [(CO)(4)Rh(2)(mu-4-NC(6)H(4)Me)(2)M(cod)] (M = Pd (6), Pt(7)) and [(CO)(4)Rh(2)(mu-4-NC(6)H(4)Me)(2)Ru(p-cymene)] (8), while the reaction with [AuCl(PPh(3))] gave the tetranuclear compound [(CO)(4)Rh(2)(mu--4-NC(6)H(4)Me)(2)[Au(PPh(3))](2)] (9). The structures of complexes 6, 8, and 9 were determined by X-ray diffraction studies. The anion of 5 reacts with [AuCl(PPh(3))] to give the butterfly cluster [[Rh(3)(mu-4-NC(6)H(4)Me)(2)(CO)(6)]Au(PPh(3))] (10), in which the Au atom is bonded to two rhodium atoms. Reaction of the anion of 5 with [Rh(cod)(NCMe)(2)](BF(4)) gave the tetranuclear complex [Rh(4)(mu-4-NC(6)H(4)Me)(2)(CO)(6)(cod)] (11) in which the Rh(cod) fragment is pi-bonded to one of the arene rings, while the reaction of the anion of 5 with [PdCl(2)(cod)] afforded the heterotrinuclear complex 6 through a metal exchange process.     

C-C coupling reactions in the coordination sphere of rhodium(I) and rhodium(III): New routes for the di- and trimerization of terminal alkynes

The alkynyl(vinylidene)rhodium(I) complexes trans-[Rh(C[triple bond, length as m-dash]CR)(=C=CHR)(PiPr3)2] 2, 5, 6 react with CO by migratory insertion to give stereoselectively the butenynyl compounds trans-[Rh{eta1-(Z)-C(=CHR)C[triple bond, length as m-dash]CR}(CO)(PiPr3)2](Z)-7-9, of which (Z)-7 (R=Ph) and (Z)-8 (R=tBu) rearrange upon heating or UV irradiation to the (E) isomers. Similarly, trans-[Rh{eta1-C(=CH2)C[triple bond, length as m-dash]CPh}(CO)(PiPr3)2] 12 and trans-[Rh{eta1-(Z)-C(=CHCO2Me)C[triple bond, length as m-dash]CR}(CO)(PiPr3)2](Z)-15, (Z)-16 have been prepared. At room temperature, the corresponding "non-substituted" derivative trans-[Rh{eta1-C(=CH2)C[triple bond, length as m-dash]CH}(CO)(PiPr3)2] 18 is in equilibrium with the butatrienyl isomer trans-[Rh(eta1-CH=]C=C=CH2)(CO)(PiPr3)2] 19 that rearranges photochemically to the alkynyl complex trans-[Rh(C[triple bond, length as m-dash]CCH=CH2)(CO)(PiPr3)2] 20. Reactions of (Z)-7, (E)-7, (Z)-8 and (E)-8 with carboxylic acids R'CO2H (R'=CH3, CF3) yield either the butenyne (Z)- and/or (E)-RC[triple bond, length as m-dash]CCH=CHR or a mixture of the butenyne and the isomeric butatriene, the ratio of which depends on both R and R'. Treatment of 2 (R=Ph) with HCl at -40 degrees C affords five-coordinate [RhCl(C[triple bond, length as m-dash]CPh){(Z)-CH=CHPh}(PiPr3)2] 23, which at room temperature reacts by C-C coupling to give trans-[RhCl{eta2-(Z)-PhC[triple bond, length as m-dash]CCH=CHPh}(PiPr3)2](Z)-21. The related compound trans-[RhCl(eta2-HC[triple bond, length as m-dash]CCH=CH2)(PiPr3)2] 27, prepared from trans-[Rh(C[triple bond, length as m-dash]CH)(=C=CH2)(PiPr3)2] 17 and HCl, rearranges to the vinylvinylidene isomer trans-[RhCl(=C=CHCH=CH2)(PiPr3)2] 28. While stepwise reaction of 2with CF3CO2H yields, via alkynyl(vinyl)rhodium(III) intermediates (Z)-29 and (E)-29, the alkyne complexes trans-[Rh(kappa1-O2CCF3)(eta2-PhC[triple bond, length as m-dash]CCH=CHPh)(PiPr3)2](Z)-30 and (E)-30, from 2 and CH3CO2H the acetato derivative [Rh(kappa2-O2CCH3)(PiPr3)2] 33 and (Z)-PhC[triple bond, length as m-dash]CCH=]CHPh are obtained. From 6 (R=CO2Me) and HCl or HC[triple bond, length as m-dash]CCO2Me the chelate complexes [RhX(C[triple bond, length as m-dash]CCO2Me){kappa2(C,O)-CH=CHC(OMe)=O}(PiPr3)2] 34 (X=Cl) and 35 (X=C[triple bond, length as m-dash]CCO2Me) have been prepared. In contrast to the reactions of [Rh(kappa2-O2CCH3)(C[triple bond, length as m-dash]CE)(CH=CHE)(PiPr3)2] 37(E=CO2Me) with chloride sources which give, via intramolecular C-C coupling, four-coordinate trans-[RhCl{eta2-(E)-EC[triple bond, length as m-dash]CCH=CHE}(PiPr3)2](E)-36, treatment of 37with HC[triple bond, length as m-dash]CE affords, via insertion of the alkyne into the rhodium-vinyl bond, six-coordinate [Rh(kappa2-O2CCH3)(C[triple bond, length as m-dash]CE){eta1-(E,E)-C(=CHE)CH=CHE}(PiPr3)2] 38. The latter reacts with MgCl2 to yield trans-[RhCl{eta2-(E,E)-EC[triple bond, length as m-dash]CC(=CHE)CH=CHE}(PiPr3)2] 39, which, in the presence of CO, generates the substituted hexadienyne (E,E)-EC[triple bond, length as m-dash]CC(=CHE)CH=CHE 40.     

Facile synthesis of rhodium and iridium complexes bearing a [PEP]-type ligand (E = Ge or Sn) via E-C bond cleavage

Rhodium and iridium complexes bearing a tridentate [PEP] type ligand ([PEP] = {o-(Ph(2)P)C(6)H(4)}(2)E(Me); E = Ge or Sn) were synthesized through the phosphine exchange reaction accompanied by selective E-C bond cleavage. The ligand precursors {o-(Ph(2)P)C(6)H(4)}(2)EMe(2) (E = Ge or Sn) were readily obtained in excellent yields by treating {o-(Ph(2)P)C(6)H(4)}(2)Li with 0.5 equivalents of Me(2)ECl(2). Tris(triphenylphosphine)rhodium(i) carbonyl hydride M(H)(CO)(PPh(3))(3) (M = Rh, Ir) cleaved one of the E-Me bonds of {o-(Ph(2)P)C(6)H(4)}(2)EMe(2) exclusively to afford the trigonal bipyramidal (TBP) complexes, [PEP]M(CO)(PPh(3)). Square-planar rhodium complexes [PEP]Rh(PPh(3)) were also prepared from the reactions of tetrakis(triphenylphosphine)rhodium(i) hydride Rh(H)(PPh(3))(4) with {o-(Ph(2)P)C(6)H(4)}(2)EMe(2). Further, the trans influence of group 14 elements E (E = Si, Ge, Sn) in [PEP]Rh(PPh(3)) is discussed in terms of the (1)J(Rh-P) coupling constants, indicating that E exhibited a stronger trans labilizing effect in the order Sn < Ge < Si.     

Cationic and neutral diphenyldiazomethanerhodium(I) complexes as catalytically active species in the C-C coupling reaction of olefins and diphenyldiazomethane

Cationic rhodium(I) complexes cis-[Rh(acetone)2(L)(L')]+ (2: L = L'=C8H14; 3: L=C8H14; L'=PiPr3; 4: L=L'=PiPr3), prepared from [RhCl(C8H14)2]2] and isolated as PF6 salts, catalyze the C-C coupling reaction of diphenyldiazomethane with ethene, propene, and styrene. In most cases, a mixture of isomeric olefins and cyclopropanes were obtained which are formally built up by one equivalent of RCH=CH2 (R = H, Me, Ph) and one equivalent of CPh2. The efficiency and selectivity of the catalyst depends significantly on the coordination sphere around the rhodium(I) center. Treatment of 4 with Ph2CN2 in the molar ratio of 1:1 and 1:2 gave the complexes trans-[Rh(PiPr3)2(acetone)(eta1-N2CPh2)]PF6 (8) and trans-[Rh(PiPr3)2(eta1-N2CPh2)2]PF6 (9), of which 8 was characterized by X-ray crystallography. Since 8 and 9 not only react with ethene but also catalyze the reaction of C2H4 and free Ph2CN2, they can be regarded as intermediates (possibly resting states) in the C-C coupling process. The lability of 8 and 9 is illustrated by the reactions with pyridine and NaX (X=Cl, Br, I, N3) which afford the mono(diphenyldiazomethane)rhodium(I) compounds trans-[Rh(PiPr3)2(py)(eta1-N2CPh2)]PF6 (10) and trans-[RhX(eta1-N2CPh2)(PiPr3)2] (11-14), respectively. The catalytic activity of the neutral complexes 11 - 14 is somewhat less than that of the cationic species 8, 9 and decreases in the order Cl > Br> I > N3.     

Early-late heterobimetallic alkoxides as model systems for late-transition-metal catalysts supported on titania

Titanium complexes with chelating alkoxide ligands [TiCp*(O(2)Bz)(OBzOH)] (1) and [TiCp*(Me)((OCH(2))(2)Py)] (2) were synthesised by reaction of [TiCp*Me(3)] (Cp*=eta(5)-C(5)Me(5)) with 2-hydroxybenzyl alcohol ((HO)(2)Bz) and 2,6-pyridinedimethanol ((HOCH(2))(2)Py), respectively. Complex 1 reacts with [(M(mu-OH)(cod))(2)] (M=Rh, Ir) to yield the early-late heterobimetallic complexes [TiCp*(O(2)Bz)(2)M(cod)] [M=Rh (3), Ir (4)]. Carbon monoxide readily replaces the COD ligand in 3 to give the rhodium dicarbonyl derivative [TiCp*(O(2)Bz)(2)Rh(CO)(2)] (5). Compound 2 reacts with [(M(mu-OH)(cod))(2)] (M=Rh, Ir) with protonolysis of a Tibond;Me bond to give [TiCp*((OCH(2))(2)Py)(mu-O)M(cod)] [M=Rh (6), Ir (7)]. The molecular structures of complexes 3, 5 and 7 were established by single-crystal X-ray diffraction studies.     

A mechanistic investigation of oxidative addition of methyl iodide to [Tp*Rh(CO)(L)

Reaction of methyl iodide with square planar [kappa(2)-Tp*Rh(CO)(PMe(3))] 1a (Tp* = HB(3,5-Me(2)pz)(3)) at room temperature affords [kappa(3)-Tp*Rh(CO)(PMe(3))(Me)]I 2a, which was fully characterized by spectroscopy and X-ray crystallography. The pseudooctahedral geometry of cationic 2a, which contains a kappa(3)-coordinated Tp* ligand, indicates a reaction mechanism in which nucleophilic attack by Rh on MeI is accompanied by coordination of the pendant pyrazolyl group. In solution 2a transforms slowly into a neutral (acetyl)(iodo) rhodium complex [kappa(3)-Tp*Rh(PMe(3))(COMe)I] 3a, for which an X-ray crystal structure is also reported. Kinetic studies on the reactions of [kappa(2)-Tp*Rh(CO)(L)] (L = PMe(3), PMe(2)Ph, PMePh(2), PPh(3), CO)] with MeI show second-order behavior with large negative activation entropies, consistent with an S(N)2 mechanism. The second-order rate constants correlate well with phosphine basicity. For L = CO, reaction with MeI gives an acetyl complex, [kappa(3)-Tp*Rh(CO)(COMe)I]. The bis(pyrazolyl)borate complexes [kappa(2)-Bp*Rh(CO)(L)] (L = PPh(3), CO) are much less reactive toward MeI than the Tp* analogues, indicating the importance of the third pyrazolyl group and the accessibility of a kappa(3) coordination mode. The results strengthen the evidence in favor of an S(N)2 mechanism for oxidative addition of MeI to square planar d(8) transition metal complexes.     

High-pressure investigations under CO/H2 of rhodium complexes containing hemispherical diphosphites

The two rhodium complexes [Rh(acac)(L(R))] (L(R)=(S,S)-5,11,17,23-tetra-tert-butyl-25,27-di(OR)-26,28-bis(1,1'-binaphthyl-2,2'-dioxyphosphanyloxy)calix[4]arene; 6: R=benzyl, 7: R=fluorenyl), each based on a hemispherical chelator forming a pocket about the metal centre upon chelation, are active in the hydroformylation of 1-octene and styrene. As expected for this family of diphosphanes, both complexes resulted in remarkably high selectivity towards the linear aldehyde in the hydroformylation of 1-octene (l/b≈15 for both complexes). Linear aldehyde selectivity was also observed when using styrene, but surprisingly only 6 displayed a marked preference for the linear product (l/b=12.4 (6) vs. 1.9 (7)). A detailed study of the structure of the complexes under CO or CO/H(2) in toluene was performed by high-pressure NMR (HP NMR) and FT-IR (HP-IR) spectroscopies. The spectroscopic data revealed that treatment of 6 with CO gave [Rh(acac)(CO)(η(1)-L(benzyl))] (8), in which the diphosphite behaves as a unidentate ligand. Subsequent addition of H(2) to the solution resulted in a well-defined chelate complex with the formula [RhH(CO)(2)(L(benzyl))] (9). Unlike 6, treatment of complex 7 with CO only led to ligand dissociation and concomitant formation of [Rh(acac)(CO)(2)], but upon addition of H(2) a chelate complex analogous to 9 was formed quantitatively. In both [RhH(CO)(2)(L(R))] complexes the diphosphite adopts the bis-equatorial coordination mode, a structural feature known to favour the formation of linear aldehydes. As revealed by variable-temperature NMR spectroscopy, these complexes show the typical fluxionality of trigonal bipyramidal [RhH(CO)(2)(diphosphane)] complexes. The lower linear selectivity of 7 versus 6 in the hydroformylation of styrene was assigned to steric effects, due to the pocket in which the catalysis takes place being less adapted to accommodate CO or larger olefins and, therefore, possibly leading to facile ligand decoordination. This interpretation was corroborated by an X-ray structure determination carried out for 7.     

Intermolecular hydroacylation: high activity rhodium catalysts containing small-bite-angle diphosphine ligands

Readily prepared and bench-stable rhodium complexes containing methylene bridged diphosphine ligands, viz. [Rh(C(6)H(5)F)(R(2)PCH(2)PR'(2))][BAr(F)(4)] (R, R' = (t)Bu or Cy; Ar(F) = C(6)H(3)-3,5-(CF(3))(2)), are shown to be practical and very efficient precatalysts for the intermolecular hydroacylation of a wide variety of unactivated alkenes and alkynes with β-S-substituted aldehydes. Intermediate acyl hydride complexes [Rh((t)Bu(2)PCH(2)P(t)Bu(2))H{κ(2)(S,C)-SMe(C(6)H(4)CO)}(L)](+) (L = acetone, MeCN, [NCCH(2)BF(3)](-)) and the decarbonylation product [Rh((t)Bu(2)PCH(2)P(t)Bu(2))(CO)(SMePh)](+) have been characterized in solution and by X-ray crystallography from stoichiometric reactions employing 2-(methylthio)benzaldehdye. Analogous complexes with the phosphine 2-(diphenylphosphino)benzaldehyde are also reported. Studies indicate that through judicious choice of solvent and catalyst/substrate concentration, both decarbonylation and productive hydroacylation can be tuned to such an extent that very low catalyst loadings (0.1 mol %) and turnover frequencies of greater than 300 h(-1) can be achieved. The mechanism of catalysis has been further probed by KIE and deuterium labeling experiments. Combined with the stoichiometric studies, a mechanism is proposed in which both oxidative addition of the aldehyde to give an acyl hydride and insertion of the hydride into the alkene are reversible, with the latter occurring to give both linear and branched alkyl intermediates, although reductive elimination for the linear isomer is suggested to have a considerably lower barrier.     

Synthesis and Reaction of [MnRe(CO)_6(μ-SH)(μ-SC(H)PPr_3~i)(PPh_3)]

In recent years the chemistry of mono- or hetero-binuclear complexes containing metal-S(C) bonding modes is a very active field of research. Many useful applications of this kind of complexes have been exploited, such as industrial catalytic hydrodesulfurization (HDS)1,2 and transition metals mediated organic synthesis3-5. In this paper we report that the reduction and subsequent protonation of hetero-binuclear complex [MnRe(CO)6(-S2CPPri3)] occur with cleavage of metal-metal bond and o…     

On the reactivity toward ketones of new methyl amino complexes of Rh(III) and Ag(I). Synthesis of ortho-rhodiated acetophenone methyl imine complexes

MeNH(2) reacts with silver salts AgX (2:1) to give [Ag(NH(2)Me)(2)]X [X = TfO = CF(3)SO(3) (1.TfO) and ClO(4) (1.ClO(4))]. Neutral mono(amino) Rh(III) complexes [Rh(Cp*)Cl(2)(NH(2)R)] [R = Me (2a), To = C(6)H(4)Me-4 (2b)] have been prepared by reacting [Rh(Cp*)Cl(mu-Cl)](2) with RNH(2) (1:2). The following cationic methyl amino complexes have also been prepared: [Rh(Cp*)Cl(NH(2)Me)(PPh(3))]TfO (3.TfO), from [Rh(Cp*)Cl(2)(PPh(3))] and 1.TfO (1:1); [Rh(Cp*)Cl(NH(2)R)2]X, where R = Me, X = Cl, (4a.Cl), from [Rh(Cp*)Cl(mu-Cl)]2 and MeNH2 (1:4), or R = Me, X = ClO4 (4a.ClO4), from 4a.Cl and NaClO4 (1:4.8), or R = To, X = TfO (4b.TfO), from [Rh(Cp*)Cl(mu-Cl)](2), ToNH(2) and TlTfO (1:4:2); [Rh(Cp*)(NH(2)Me)(tBubpy)](TfO)(2) (tBubpy = 4,4'-di-tert-butyl-2,2'-bipyridine, 5.TfO), from 2a, TlTfO and tBubpy (1:2:1); [Rh(Cp*)(NH(2)Me)(3)](TfO)2 (6.TfO) from [Rh(Cp*)Cl(mu-Cl)](2) and 1.TfO (1:4). 2-6 constitute the first family of methyl amino complexes of rhodium. 1 and 4a.ClO(4) react with acetone to give, respectively, the methyl imino complexes [Ag{N(Me)=CMe(2)}()]X [X = TfO (7.TfO), ClO(4) (7.ClO(4))], and [Rh(Cp*)Cl(Me-imam)]ClO(4) [8.ClO(4), Me-imam = N,N'-N(Me)=C(Me)CH(2)C(Me)(2)NHMe]. 7.X (X = TfO, ClO(4)) are new members of the small family of methyl acetimino complexes of any metal whereas 8.ClO4 results after a double acetone condensation to give the corresponding bis(methyl acetimino) complex and an aldol-like condensation of the two imino ligands. The acetimino complex [Ag(NH=CMe(2))(2)]ClO(4) reacts with [Rh(Cp*)Cl(imam)]ClO(4) [1:1, imam = N,N'-NH=C(Me)CH(2)C(Me)(2)NH(2)] to give [Rh(Cp*)(imam)(NH=CMe(2))](ClO(4))(2) (9a.ClO(4)). 8.ClO(4) reacts with AgClO(4) (1:1) in MeCN to give [Rh(Cp*)(Me-imam)(NCMe)](ClO(4))2 (9b.ClO(4)), which in turn reacts with XyNC (Xy = C(6)H(3)Me(2)-2,6) or with MeNH(2) (1:1) to give [Rh(Cp*)(Me-imam)L](ClO(4))(2) [L = XyNC (9c.ClO(4)), MeNH(2) (9d.ClO(4))]. 6.TfO reacts with acetophenone to give [Rh(Cp*){C,N-C(6)H(4)C(Me)=N(Me)-2}(NH(2)Me)]TfO (10a.TfO), the first complex resulting from such a condensation and cyclometalation reaction. In turn, 10a.TfO reacts with isocyanides RNC (1:1) at room temperature to give [Rh(Cp*){C,N-C(6)H(4)C(Me)=NMe-2}(CNR)]TfO [R = tBu (10b.TfO), Xy (10c.TfO)], or 1:12 at 60 degrees C to give [Rh(Cp*){C,N-C(=NXy)C(6)H(4)C(Me)=N(Me)-2}(CNXy)]TfO (11.TfO). The crystal structures of 9a.ClO(4).acetone-d6, 9c.ClO(4), and 10a.TfO have been determined.     

Sensitive and selective chromogenic sensing of carbon monoxide via reversible axial CO coordination in binuclear rhodium complexes

The study of probes for CO sensing of a family of binuclear rhodium(II) compounds of general formula [Rh(2){(XC(6)H(3))P(XC(6)H(4))}(n)(O(2)CR)(4-n)]·L(2) containing one or two metalated phosphines (in a head-to-tail arrangement) and different axial ligands has been conducted. Chloroform solutions of these complexes underwent rapid color change, from purple to yellow, when air samples containing CO were bubbled through them. The binuclear rhodium complexes were also adsorbed on silica and used as colorimetric probes for "naked eye" CO detection in the gas phase. When the gray-purple colored silica solids containing the rhodium probes were exposed to air containing increasing concentrations of CO, two colors were observed, in agreement with the formation of two different products. The results are consistent with an axial coordination of the CO molecule in one axial position (pink-orange) or in both (yellow). The crystal structure of 3·(CO) ([Rh(2){(C(6)H(4))P(C(6)H(5))(2)}(2)(O(2)CCF(3))(2)]·CO) was solved by single X-ray diffraction techniques. In all cases, the binuclear rhodium complexes studied showed a high selective response to CO with a remarkable low detection limit. For instance, compound 5·(CH(3)CO(2)H)(2) ([Rh(2){(m-CH(3)C(6)H(3))P(m-CH(3)C(6)H(4))(2)}(2)(O(2)CCH(3))(2)]·(CH(3)CO(2)H)(2)) is capable of detection of CO to the "naked eye" at concentrations as low as 0.2 ppm in air. Furthermore, the binding of CO in these rhodium complexes was found to be fully reversible, and release studies of carbon monoxide via thermogravimetric measurements have also been carried out. The importance of the silica support for the maintenance of the CO-displaced L ligands in the vicinity of the probes in a noninnocent manner has been also proved.     

Redox behavior of rhodium 9,10-phenanthrenediimine complexes

New square-planar rhodium complexes of the redox-active ligand 9,10-phenenthrenediimine (phdi) have been prepared and studied. The complexes [dpp-nacnac(CH3)]Rh(phdi) (2a; [dpp-nacnac(CH3)](-) = CH[C(Me)(N-(i)Pr(2)C(6)H(3))](2)(-)) and [dpp-nacnac(CF3)]Rh(phdi) (2b; [dpp-nacnac(CF3)](-) = CH[C(CF(3))(N-(i)Pr(2)C(6)H(3))](2)(-)) have been prepared from the corresponding [nacnac]Rh(CO)(2) synthons by treatment with Me(3)NO in the presence of the phdi ligand. Complexes 2a and 2b are diamagnetic, and their absorption spectra are dominated by intense charge-transfer transitions throughout the visible region. Electrochemical studies indicate that both the phdi ligand and the rhodium metal center are redox-active, with the [nacnac](-) ligands serving to modulate the one-electron-oxidation and -reduction redox potentials. In the case of 2a, chemical oxidation and reduction reactions provided access to the one-electron-oxidized cation, [2a](+), and one-electron-reduced anion, [2a](-), the latter of which has been characterized in the solid state by single-crystal X-ray diffraction. Solution electron paramagnetic resonance spectra of [2a](+) and [2a](-) are consistent with S = (1)/(2) spin systems, but surprisingly the low-temperature spectrum of [2a](-) shows a high degree of rhombicity, suggestive of rhodium(II) character in the reduced anion.     

Dinuclear rhodium and iridium complexes with mixed amido/methoxo and amido/hydroxo bridges

The reactions of [[M(mu-OMe)(cod)](2)] (M = Rh, Ir; cod = 1,5- cyclooctadiene) with p-tolylamine, alpha-naphthylamine, and p-nitroaniline gave complexes with mixed-bridging ligands, [[M(cod)](2)(mu-NHAr)(mu-OMe)]. Similarly, the related complexes [[Rh(cod)](2)(mu-NHAr)(mu-OH)] were prepared from the reactions of [[Rh(mu-OH)(cod)](2)] with p-tolylamine, alpha-naphthylamine, and p-nitroaniline. The reactions of [[Rh(mu-OR)(cod)](2)] (R = H, Me) with o-nitroaniline gave the mononuclear complex [Rh(o-NO(2)C(6)H(4)NH)(cod)]. The syntheses of the amido complexes involve a proton exchange reaction from the amines to the methoxo or hydroxo ligands and the coordination of the amide ligand. These reactions were found to be reversible for the dinuclear complexes. The structure of [[Rh(cod)](2)(mu-NH[p-NO(2)C(6)H(4)])(mu-OMe)] shows two edge-shared square-planar rhodium centers folded at the edge with an anti configuration of the bridging ligands. The complex [[Rh(cod)](2)(mu-NH[alpha-naphthyl])(mu-OH)] cocrystallizes with [[Rh(mu-OH)(cod)](2)] and THF, forming a supramolecular aggregate supported by five hydrogen bridges in the solid state. In the mononuclear [Rh(o-NO(2)C(6)H(4)NH)(cod)] complex the o-nitroamido ligand chelates the rhodium center through the amido nitrogen and an oxygen of the nitro group.     

A mechanistic investigation into the elimination of phosphonium salts from rhodium-TRIPHOS complexes under methanol carbonylation conditions

Phosphine modified rhodium complexes are currently the topic of considerable research as methanol carbonylation catalysts, but often suffer from poor stability. This paper reports on an investigation into how coordination mode affects the elimination of phosphonium salts from rhodium complexes, namely [trans-RhCl(CO)(PPh(3))(2)] , [RhCl(CO)(dppe)] , [RhCl(CO)(dppb)](2), [Rh(TRIPHOS)(CO)(2)]Cl . These complexes are all potential pre-catalysts for methanol carbonylation. The reaction of these complexes with methyl iodide at 140 degrees C under both N(2) and CO atmospheres has been studied and has revealed clear differences in the stability of the corresponding Rh(iii) complexes. In contrast to both monomeric and dimeric that react cleanly with CH(3)I to give stable Rh(iii) acetyl complexes, forms a novel bidentate complex after the elimination of the one arm of the ligand as a quaternised phosphonium salt. The structure of this complex has been determined spectroscopically and using X-ray crystallography. The mechanism of formation of this novel complex has been investigated using (13)CH(3)I and strong evidence that supports a dissociative mechanism as the means of phosphine loss from the rhodium centre is provided.     

Alkyne insertion into cyclometallated pyrazole and imine complexes of iridium, rhodium and ruthenium; relevance to catalytic formation of carbo- and heterocycles

The cyclometallated complexes [MCl(C^N)(ring)] (HC^N = 2-phenylpyrazole, M = Ir, Rh ring = Cp*; M = Ru, ring = p-cymene) readily undergo insertion reactions with RC≡CR (R = CO(2)Me, Ph) to give mono insertion products, the rhodium complex also reacts with PhC≡CH regiospecifically to give an analogous product. The products of the reactions of the cyclometallated imine complexes [MCl(C^N)Cp*] (HC^N = PhCH=NR, R = Ph, CH(2)CH(2)OMe, Me; M = Ir, Rh) with PhC≡CPh depend on the substituent R; when R = CH(2)CH(2)OMe a monoinsertion is observed, however for R = Me the initial insertion product is unstable, undergoing reductive elimination with loss of the organic fragment, and for R = Ph no metal-containing product is isolated. With PhC≡CH the cyclometallated imine complexes can give mono or di-insertion products. The implications for catalytic synthesis of carbo- and heterocycles by a tandem C-H activation, alkyne insertion mechanism are discussed.     

C-F or C-H bond activation and C-C coupling reactions of fluorinated pyridines at rhodium: synthesis, structure and reactivity of a variety of tetrafluoropyridyl complexes

Reactions of [RhH(PEt3)3] (1) or [RhH(PEt3)4] (2) with pentafluoropyridine or 2,3,5,6-tetrafluoropyridine afford the activation product [Rh(4-C5NF4)(PEt3)3] (3). Treatment of 3 with CO, 13CO or CNtBu effects the formation of trans-[Rh(4-C5NF4)(CO)(PEt3)2] (4a), trans-[Rh(4-C5NF4)(13CO)(PEt3)2] (4b) and trans-[Rh(4-C5NF4)(CNtBu)(PEt3)2] (5). The rhodium(III) compounds trans-[RhI(CH3)(4-C5NF4)(PEt3)2] (6a) and trans-[RhI(13CH3)(4-C5NF4)(PEt3)2] (6b) are accessible on reaction of 3 with CH3I or 13CH3I. In the presence of CO or 13CO these complexes convert into trans-[RhI(CH3)(4-C5NF4)(CO)(PEt3)2] (7a), trans-[RhI(13CH3)(4-C5NF4)(CO)(PEt3)2] (7b) and trans-[RhI(13CH3)(4-C5NF4)(13CO)(PEt3)2] (7c). The trans arrangement of the carbonyl and methyl ligand in 7a-7c has been confirmed by the 13C-13C coupling constant in the 13C NMR spectrum of 7c. A reaction of 4a or 4b with CH3I or 13CH3I yields the acyl compounds trans-[RhI(COCH3)(4-C5NF4)(PEt3)2] (8a) and trans-[RhI(13CO13CH3)(4-C5NF4)(PEt3)2] (8b), respectively. Complex 8a slowly reacts with more CH3I to give [PEt3Me][Rh(I)2(COCH3)(4-C5NF4)(PEt3)](9). On heating a solution of 7a, the complex trans-[RhI(CO)(PEt3)2] (10) and the C-C coupled product 4-methyltetrafluoropyridine (11) have been obtained. Complex 8a also forms 10 at elevated temperatures in the presence of CO together with the new ketone 4-acetyltetrafluoropyridine (12). The structures of the complexes 3, 4a, 5, 6a, 8a and 9 have been determined by X-ray crystallography. 19F-1H HMQC NMR solution spectra of 6a and 8a reveal a close contact of the methyl groups in the phosphine to the methyl or acyl ligand bound at rhodium.     

Tetranuclear [Rh4(mu-PyS2)2(diolefin)4] complexes as building blocks for new inorganic architectures: synthesis of coordination polymers and heteropolynuclear complexes with electrophilic d8 and d10 metal fragments

The reaction of [Rh4(mu-PyS2)2(cod)4] (PyS2 = 2,6-pyridinedithiolate, cod = 1,5-cyclooctadiene) with CF3SO3Me gave the cationic complex [Rh(4)(mu-PyS(2)Me)(2)(cod)4][CF3SO3]2 (1) with two 6-(thiomethyl)pyridine-2-thiolate bridging ligands from the attack of Me+ at the terminal sulfur atoms of the starting material. Under identical conditions [Rh4(mu-PyS2)2(tfbb)4] (tfbb = tetrafluorobenzobarrelene) reacted with CF3SO3Me to give the mixed-ligand complex [Rh(4)(mu-PyS2)(mu-PyS2Me)(tfbb)4][CF3SO3] 2. The nucleophilicity of the bridging ligands in the complexes [Rh4(mu-PyS2)2(diolefin)4] was exploited to prepare heteropolynuclear species. Reactions with [Au(PPh3)(Me2CO)][ClO4] gave the hexanuclear complexes [(PPh3)2Au2Rh4(mu-PyS2)2(diolefin)4][ClO4]2 (diolefin = cod (3), tfbb (4)). The structure of 4, solved by X-ray diffraction methods, showed the coordination of the [Au(PPh3)]+ fragments to the peripheral sulfur atoms in [Rh4(mu-PyS2)2(diolefin)4] along with their interaction with the neighbor rhodium atoms. Neutral coordination polymers of formula [ClMRh4(mu-PyS2)2(diolefin)4]n (M = Cu (5, 6), Au (7)) result from the self-assembly of alternating [Rh4(mu-PyS2)2(diolefin)4] ([Rh4]) blocks and MCl linkers. The formation of the infinite polymetallic chains was found to be chiroselective for M = Cu; one particular chain contains exclusively homochiral [Rh4] complexes. Cationic heterometallic coordination polymers of formula [MRh4(mu-PyS2)2(diolefin)4]n[BF4]n (M = Ag (8, 9), Cu (10, 11)) and [Rh5(mu-PyS2)2(diolefin)5]n[BF4]n (12, 13) result from the reactions of [Rh4] with [Cu(CH2CN)4]BF4, AgBF4, and [Rh(diolefin)(Me2CO)2]BF4, respectively. The heterometallic coordination polymers exhibit a weak electric conductivity in the solid state in the range (1.2-2.8) x 10(-7) S cm(-1).