Brownian dynamics simulations of polyelectrolyte adsorption onto charged patterned surfaces

The adsorption of single polyelectrolyte molecules onto surfaces decorated with periodic arrays of charged patches was studied using Brownian dynamics simulations. A free-draining, freely jointed bead-rod chain was used to model the polyelectrolyte, and electrostatic interactions were incorporated using a screened Coulombic potential with the excluded volume accounted for by a hard-sphere potential. The simulations predicted that the polyelectrolyte lies close to the adsorbing surface if the patch length, surface charge density, and screening length are sufficiently large. Chain conformations were found to be very sensitive to patch length, patch spacing, and the nature of the charge on adjacent patches. This is due both to the size of the polymer relative to patch length and spacing and to the structure of the electric field near the surface. In some cases, the component of the radius of gyration parallel to the surface can be made smaller than its free-solution value, which is contrary to what is observed for a uniformly charged surface. Isolated charged patches were also considered, and significant adsorption was observed above a critical surface charge density. The results demonstrate how polyelectrolyte conformations can be controlled by the design of the charged patches and may be useful for applications in which adsorbed polyelectrolyte films play a key role.     

Theory of polyelectrolyte adsorption onto surfaces patterned with charge and topography

Mean-field theory is used to derive criteria for the adsorption of a weakly charged polyelectrolyte molecule from salt solution onto surfaces patterned with charge and topography. For flat surfaces patterned with periodic arrays of charged patches, the adsorbed layer thickness predicted using mean-field theory and that found by Brownian dynamics simulations are in quantitative agreement in the strong-adsorption regime, which corresponds to sufficiently small kappa or sufficiently large |sigma(eff)q|, where kappa is the inverse Debye screening length, sigma(eff) is an effective surface charge density, and q is the charge on each segment of the polyelectrolyte. Qualitative agreement is obtained in the weak-adsorption regime, and for the case where surfaces are patterned with both charge and topography. For uniformly charged, sinusoidally corrugated surfaces, the theory predicts that the critical temperature required for adsorption can be greater than or less than the corresponding value for a flat surface depending on the relative values of kappa and the corrugation wave number. If the surface charge is also allowed to vary sinusoidally, then adsorption is predicted to occur only when the topography crests have a surface charge opposite to that of the polyelectrolyte. Surfaces patterned with rectangular indentations having charged bottoms which are separated by flat charged plateaus are investigated as well. Adsorption is predicted to occur even when the net surface charge is zero, provided that the plateaus have a charge opposite to that of the polyelectrolyte. If the charge on the plateaus and polyelectrolyte is the same, adsorption may still occur if electrostatic attraction from the indentation bottoms is sufficiently strong.     

Brownian dynamics simulations of polyelectrolyte adsorption in shear flow with hydrodynamic interaction

The adsorption of single polyelectrolyte molecules in shear flow is studied using Brownian dynamics simulations with hydrodynamic interaction (HI). Simulations are performed with bead-rod and bead-spring chains, and electrostatic interactions are incorporated through a screened Coulombic potential with excluded volume accounted for by the repulsive part of a Lennard-Jones potential. A correction to the Rotne-Prager-Yamakawa tensor is derived that accounts for the presence of a planar wall. The simulations show that migration away from an uncharged wall, which is due to bead-wall HI, is enhanced by increases in the strength of flow and intrachain electrostatic repulsion, consistent with kinetic theory predictions. When the wall and polyelectrolyte are oppositely charged, chain behavior depends on the strength of electrostatic screening. For strong screening, chains get depleted from a region close to the wall and the thickness of this depletion layer scales as N(1/3)Wi(2/3) at high Wi, where N is the chain length and Wi is the Weissenberg number. At intermediate screening, bead-wall electrostatic attraction competes with bead-wall HI, and it is found that there is a critical Weissenberg number for desorption which scales as N(-1/2)kappa(-3)(l(B)|sigmaq|)(3/2), where kappa is the inverse screening length, l(B) is the Bjerrum length, sigma is the surface charge density, and q is the bead charge. When the screening is weak, adsorbed chains are observed to align in the vorticity direction at low shear rates due to the effects of repulsive intramolecular interactions. At higher shear rates, the chains align in the flow direction. The simulation method and results of this work are expected to be useful for a number of applications in biophysics and materials science in which polyelectrolyte adsorption plays a key role.     

Brownian dynamics simulations of polyelectrolyte adsorption in shear flow

Brownian dynamics simulations are used to study the adsorption of an isolated polyelectrolyte molecule onto an oppositely charged flat surface in the absence and the presence of an imposed shear flow. The polyelectrolyte is modeled as a freely jointed bead-rod chain where excluded volume interactions are incorporated by using a hard-sphere potential. The total charge along the backbone is distributed uniformly among all the beads, and the beads are allowed to interact with one another and the charged surface through screened Coulombic interactions. The simulations are performed by placing the molecule a fixed distance above the surface, and the adsorption behavior is then studied as a function of screening length. In the absence of an imposed flow, the chain is found to lie flat and extended on the adsorbing surface in the limit of weak screening, whereas in the limit of strong screening it desorbs from the surface and attains free-solution behavior. For intermediate screening, only a small portion of the chain adsorbs and it becomes highly extended in the direction normal to the surface. An imposed shear flow tends to orient the chain in the direction of flow and also leads to increased contact of the chain with the surface.     

Brownian dynamics simulations of polyelectrolyte adsorption in shear flow: effects of solvent quality and charge patterning

We probe the effects of solvent quality and charge patterning on polyelectrolyte adsorption in shear flow using Brownian dynamics simulations with hydrodynamic interaction (HI). The polyelectrolyte is modeled as a freely jointed bead-rod chain, and electrostatic and non-electrostatic interactions are accounted for by using screened Coulombic and Lennard-Jones potentials, respectively. In the absence of flow, the conformation of a polyelectrolyte molecule adsorbed onto a uniformly charged surface changes from flat to globular with an increase in bead-bead attraction (hydrophobicity), consistent with prior experimental observations. In the presence of flow, migration due to bead-wall HI and, as a consequence, desorption decrease with an increase in bead-bead attraction, implying that flow-induced desorption is more difficult under poor-solvent conditions. When bead-bead non-electrostatic attraction is strong, desorption can be enhanced by increasing bead-bead electrostatic repulsion. Analogous to the effect of bead-surface electrostatic attraction, an increase in the strength of bead-surface non-electrostatic attraction reduces desorption. We also study the effect of shear flow on the adsorption of a polyelectrolyte molecule onto surfaces decorated with periodic arrays of charged patches. An increase in patch periodicity increases desorption even when the effective surface charge density is kept the same. The results of this work suggest mechanisms for controlling the desorption of polyelectrolyte molecules in shear flows.     

Molecular dynamics simulations of polyelectrolyte brushes: from single chains to bundles of chains

Using molecular dynamics simulations in combination with scaling analysis, we have studied the effects of the solvent quality and the strength of the electrostatic interactions on the conformations of spherical polyelectrolyte brushes in salt-free solutions. The spherical polyelectrolyte brush could be in one of four conformations: (1) a star-like conformation, (2) a "star of bundles" conformation in which the polyelectrolyte chains self-assemble into pinned cylindrical micelles, (3) a micelle-like conformation with a dense core and charged corona, or (4) a conformation in which there is a thin polymeric layer uniformly covering the particle surface. These different brush conformations appear as a result of the fine interplay between electrostatic and monomer-monomer interactions. The brush thickness depends nonmonotonically on the value of the Bjerrum length. This dependence of the brush thickness is due to counterion condensation inside the brush volume. We have also established that bundle formation in poor solvent conditions for the polymer backbone can also occur in a planar polyelectrolyte brush. In this case, the grafted polyelectrolyte chains form hemispherical aggregates at low polymer grafting densities, cylindrical aggregates at an intermediate range of the grafting densities, and vertically oriented ribbon-like aggregates at high grafting densities.     

Statistical thermodynamics for chain molecules with simple RNA tertiary contacts

A statistical thermodynamic model is developed for chain molecules with simple RNA tertiary contacts. The model, which accounts for the excluded volume effect and the nonadditivity in the free energy, enables reliable predictions for the conformational entropy and partition function for simple tertiary folds. Illustrative applications are made to conformational transitions involving simple tertiary contacts. The model can predict the interplay between the secondary and the tertiary interactions in the conformational changes. Though the present form of the theory is tested and validated in a two-dimensional lattice model, the methodology, which is developed based on a general graphical representation for chain conformations, is applicable to any off-lattice chain representations. Moreover, the analytical formulation of the method makes possible the systematic development of the theory for more complex tertiary structures.     

Molecular dynamics simulations of polyelectrolyte-polyampholyte complexes. Effect of solvent quality and salt concentration

Complexation between polyelectrolyte and polyampholyte chains in poor solvent conditions for the polyelectrolyte backbone has been studied by molecular dynamics simulations. In a poor solvent a polyelectrolyte forms a necklace-like structure consisting of polymeric globules (beads) connected by strings of monomers. The simulation results can be explained by assuming the existence of two different mechanisms leading to the necklace formation. In the case of weak electrostatic interactions, the necklace formation is driven by optimization of short-range monomer-monomer attraction and electrostatic repulsion between charged monomers on the polymer backbone. In the case of strong electrostatic interactions, the necklace structure appears as a result of counterion condensation. While the short-range attractions between monomers are still important, the correlation-induced attraction between condensed counterions and charged monomers and electrostatic repulsion between uncompensated charges provide significant contribution to optimization of the necklace structure. Upon forming a complex with both random and diblock polyampholytes, a polyelectrolyte chain changes its necklace conformation by forming one huge bead. The collapse of the polyelectrolyte chain occurs due to the neutralization of the polyelectrolyte charge by polyampholytes. In the case of the random polyampholyte, the more positively charged sections of the chain mix with negatively charged polyelectrolyte forming the globular bead while more negatively charged chain sections form loops surrounding the collapsed core of the aggregate. In the case of diblock polyampholyte, the positively charged block, a part of the negatively charged block, and a polyelectrolyte chain form a core of the aggregate with a substantial section of the negatively charged block sticking out from the collapsed core of the aggregate. In both cases the core of the aggregate has a layered structure that is characterized by the variations in the excess of concentration of monomers belonging to polyampholyte and polyelectrolyte chains throughout the core radius. These structures appear as a result of optimization of the net electrostatic energy of the complex and short-range attractive interactions between monomers of the polyelectrolyte chain.     

Confinement free energy of flexible polyelectrolytes in spherical cavities

A weakly charged flexible polyelectrolyte chain in a neutral spherical cavity is analyzed by using self-consistent field theory within an explicit solvent model. Assuming the radial symmetry for the system, it is found that the confinement of the chain leads to creation of a charge density wave along with the development of a potential difference across the center of cavity and the surface. We show that the solvent entropy plays an important role in the free energy of the confined system. For a given radius of the spherical cavity and fixed charge density along the backbone of the chain, solvent and small ion entropies dominate over all other contributions when chain lengths are small. However, with the increase in chain length, chain conformational entropy and polymer-solvent interaction energy also become important. Our calculations reveal that energy due to electrostatic interactions plays a minor role in the free energy. Furthermore, we show that the total free energy under spherical confinement is not extensive in the number of monomers. Results for the osmotic pressure and mean activity coefficient for monovalent salt are presented. We demonstrate that fluctuations at one-loop level lower the free energy and corrections to the osmotic pressure and mean activity coefficient of the salt are discussed. Finite size corrections are shown to widen the range of validity of the fluctuation analysis.     

Surface Attachment Enhances the Thermodynamic Stability of Protein L

Despite the importance of protein–surface interactions in both biology and biotechnology, our understanding of their origins is limited due to a paucity of experimental studies of the thermodynamics behind such interactions. In response, we have characterized the extent to which interaction with a chemically well‐defined macroscopic surface alters the stability of protein L. To do so, we site‐specifically attached a redox‐reporter‐modified protein variant to a hydroxy‐terminated monolayer on a gold surface and then used electrochemistry to monitor its guanidine denaturation and determine its folding free energy. Comparison with the free energy seen in solution indicates that interaction with this surface stabilizes the protein by 6 kJ mol^?1, a value that is in good agreement with theoretical estimates of the entropic consequences of surface‐induced excluded volume effects, thus suggesting that chemically specific interactions with this surface (e.g., electrostatic interactions) are limited in magnitude.     

A modified Poisson-Boltzmann model including charge regulation for the adsorption of ionizable polyelectrolytes to charged interfaces, applied to lysozyme adsorption on silica

The equilibrium adsorption of polyelectrolytes with multiple types of ionizable groups is described using a modified Poisson-Boltzmann equation including charge regulation of both the polymer and the interface. A one-dimensional mean-field model is used in which the electrostatic potential is assumed constant in the lateral direction parallel to the surface. The electrostatic potential and ionization degrees of the different ionizable groups are calculated as function of the distance from the surface after which the electric and chemical contributions to the free energy are obtained. The various interactions between small ions, surface and polyelectrolyte are self-consistently considered in the model, such as the increase in charge of polyelectrolyte and surface upon adsorption as well as the displacement of small ions and the decrease of permittivity. These interactions may lead to complex dependencies of the adsorbed amount of polyelectrolyte on pH, ionic strength, and properties of the polymer (volume, permittivity, number, and type of ionizable groups) and of the surface (number of ionizable groups, pK, Stern capacity). For the adsorption of lysozyme on silica, the model qualitatively describes the gradual increase of adsorbed amount with pH up to a maximum value at pHc, which is below the iso-electric point, as well as the sharp decrease of adsorbed amount beyond pHc. With increasing ionic strength the adsorbed amount decreases (for pH > pHc), and pHc shifts to lower values.     

The bridging force between two plates by polyelectrolyte chains

The interaction between particles in a colloidal system can be significantly affected by their bridging by polyelectrolyte chains. In this paper, the bridging is investigated by using a self-consistent field approach which takes into account the van der Waals interactions between the segments of the polyelectrolyte molecules and the plates, as well as the electrostatic and volume exclusion interactions. A positive contribution to the force between two plates is generated by the van der Waals interactions between the segments and the plates. This positive (repulsive) contribution plays an important role in the force when the distances between the plates are small. With increasing van der Waals interaction strength between segments and plates, the force between the plates becomes more repulsive at small distances and more attractive at large distances. When the surfaces of the plates have a constant surface electrical potential and a charge sign opposite to that of the polyelectrolyte chains, the force between the two plates becomes less attractive as the bulk polyelectrolyte concentration increases. This behavior is due to a higher bulk counterion concentration dissociated from the polyelectrolyte molecules. At short distances, the force between plates is more repulsive for stiffer chains. A comparison between theoretical and experimental results regarding the contraction of the interlayer separation between the platelets of vermiculite clays against the concentration of poly(vinyl methyl ether) was made.     

Polymer translocation through a cylindrical channel

A formalism of polymer translocation through a cylindrical channel of finite diameter and length between two spherical compartments is developed. Unlike previous simplified systems, the finite diameter of the channel allows the number of polymer segments inside the channel to be adjusted during translocation according to the free energy of possible conformations. The translocation process of a Gaussian chain without excluded volume and hydrodynamic interactions is studied using exact formulas of confinement free energy under this formalism. The free energy landscape for the translocation process, the distribution of the translocation time, and the average translocation time are presented. The complex dependencies of the average translocation time on the length and diameter of the channel, the sizes of the donor and receptor compartments, and the chain length are illustrated.     

Molecular dynamics simulation of discontinuous volume phase transitions in highly-charged crosslinked polyelectrolyte networks with explicit counterions in good solvent

The volumetric properties of highly-charged defect-free polyelectrolyte networks with tetrafunctional crosslinks are studied through molecular dynamics simulations in the canonical ensemble. The network backbone monomers, which are monovalent, and the counterions, which are mono-, di-, or trivalent, are modeled explicitly in the simulations, but the solvent is treated implicitly as a dielectric medium of good solvation quality. The osmotic pressure of the network-solvent system is found to depend greatly on the strength of electrostatic interactions. Discontinuous volume phase transitions are observed when the electrostatic interactions are strong, and the onset of these transitions shifts to higher solvent dielectricity as the counterion valency increases. The roles of the various virial contributions to the osmotic pressure are examined. The network elasticity entropy is found to behave nearly classically. As the network contracts and collapses with increasing strength of electrostatic interactions, the loss of counterion entropy leads to increased counterion osmotic pressure contributions via two mechanisms. The reduction in available configurational space increases the counterion translational entropy contribution to the ideal part of the osmotic pressure, and the greater number of counterion-monomer contacts formed due to counterion condensation and confinement increases the counterion excluded-volume entropy contribution to the excess part of the osmotic pressure. These observations contrast the decrease in the single ideal-gas-like counterion translational entropy contribution to the osmotic pressure predicted by the counterion condensation-charge renormalization theory. An accompanying decrease in the total electrostatic energy balances the loss of counterion excluded-volume entropy as the polyelectrolyte networks collapse in low-dielectric solvents. This interplay between the electrostatic energy and the counterion excluded-volume entropy appears to be responsible for the discontinuous volume phase transitions that are observed in polyelectrolyte networks. The structure of the polyelectrolyte network is also found to be affine in the swollen state, with constituent chains nearly fully extended, and nonaffine in the collapsed state, with the chains adopting a Gaussian conformation.     

Cylindrical cell model for the electrostatic free energy of polyelectrolyte complexes

Associative phase separation (complex coacervation) in a mixture of oppositely charged polyelectrolytes can lead to different types of (inter-)polyelectrolyte complexes (soluble micelles, macroscopic precipitation). In a previous report [Langmuir 2004, 20, 2785-2791], we presented a model for the electrostatic free energy change when (weakly charged) polyelectrolyte forms a homogeneous complex phase. The influence of ionization of the polymer on the electrostatic free energy of the complex was incorporated but the influence of complex density neglected. In the present effort, cylindrical cells are assumed around each polyelectrolyte chain in the complex, and on the basis of the Poisson-Boltzmann equation, the electrostatic free energy is calculated as a function of the complex density. After combination with Flory-Huggins mixing free energy terms and minimization of the total free energy, the equilibrium complex density is obtained, for a given ratio of polycations to polyanions in the complex. The analysis is used in an example calculation ofpolyelectrolyte film formation by alternatingly applying a polycation and a polyanion solution. The calculation suggests that the often observed exponential growth of a polyelectrolyte film when the polymer is weakly charged has a thermodynamic origin: the polyelectrolyte complex shifts repeatedly between two equilibrium states of different densities and compositions. However, when the polyelectrolytes are strongly charged the difference in the compositions between the two equilibrium states is very small, and exponential growth by an absorption mechanism is no longer possible.     

Association-dissociation equilibrium of loop structures in single-chain folding into a toroidal condensate

Recently, it has been revealed that a semiflexible polyelectrolyte chain can form a partially folded conformation stably as a result of an electrostatic interaction. Interestingly, there are cases where the appearance of this structure requires a high-salt condition of a solution. In order to solve this problem, we consider the double equilibrium of the formation of loops and their aggregation on a single-chain polymer. First, an aggregate with a typical surface energy is examined as a test case. The basic nature of the folding transition is discussed with regard to the chemical potential of loop structures. Next, we consider a charged aggregate for which the interior is completely neutralized by counter ions. In this model, a partially folded chain appears with a high-salt condition. Based on this model, screened interactions between surface charges and a toroidal shape of a folded structure are considered essential factors bihind this phenomenon.     

New approach to free energy of solvation applying continuum models to molecular dynamics simulation

A new approach to the calculation of the free energy of solvation from trajectories obtained by molecular dynamics simulation is presented. The free energy of solvation is computed as the sum of three contributions originated at the cavitation of the solute by the solvent, the solute-solvent nonpolar (repulsion and dispersion) interactions, and the electrostatic solvation of the solute. The electrostatic term is calculated based on ideas developed for the broadly used continuum models, the cavitational contribution from the excluded volume by the Claverie-Pierotti model, and the Van der Waals term directly from the molecular dynamics simulation. The proposed model is tested for diluted aqueous solutions of simple molecules containing a variety of chemically important functions: methanol, methylamine, water, methanethiol, and dichloromethane. These solutions were treated by molecular dynamics simulations using SPC/E water and the OPLS force field for the organic molecules. Obtained free energies of solvation are in very good agreement with experimental data.     

Polyelectrolyte stars in planar confinement

We employ monomer-resolved molecular dynamics simulations and theoretical considerations to analyze the conformations of multiarm polyelectrolyte stars close to planar, uncharged walls. We identify three mechanisms that contribute to the emergence of a repulsive star-wall force, namely, the confinement of the counterions that are trapped in the star interior, the increase in electrostatic energy due to confinement as well as a novel mechanism arising from the compression of the stiff polyelectrolyte rods approaching the wall. The latter is not present in the case of interaction between two polyelectrolyte stars and is a direct consequence of the impenetrable character of the planar wall.     

Cascade of coil-globule conformational transitions of single flexible polyelectrolyte molecules in poor solvent

We show that hydrophobic flexible polyelectrolyte molecules of poly(2-vinylpyridine) and poly(methacryloyloxyethyl dimethylbenzylammonium chloride) are trapped and frozen due to adsorption on the mica surface, and the observed AFM single molecule structures reflect the molecular conformation in solution. An increase of the ionic strength of the solution induces the cascade of abrupt conformational transitions due to the intrachain segregation from elongated coil to compact globule conformations through intermediate pearl necklace-globule conformations with different amounts of beads per chain. The length of the necklaces and the number of beads decrease, while the diameter of beads increases with the increase of ionic strength. Coexistence at the same time of extended coils, necklaces with different amounts of beads, and compact globules indicates the cascade of the first-order-type phase transitions.