1,4-二氧六环的真空紫外同步辐射光解离电离研究

The photoionization and photodissociation of 1,4-dioxane have been investigated with a reflectron time-of-flight photoionization mass spectrometry and a tunable vacuum ultraviolet synchrotron radiation in the energy region of 8.0-15.5 eV. Parent ion and fragment ions at m/z 88, 87, 58, 57, 45, 44, 43, 41, 31, 30, 29, 28 and 15 are detected under supersonic conditions. The ionization energy of DX as well as the appearance energies of its fragment ions C₄H₇O₂⁺, C₃H₆O⁺, C₃H₅O⁺, C₂H₅O⁺, C₂H₄O⁺, C₂H₃O⁺, C₃H₅⁺, CH₃O⁺, C₂H₆⁺, C₂H₅⁺/CHO⁺, C₂H₄⁺ and CH₃⁺ was determined from their photoionization efficiency curves. The optimized structures for the neutrals, cations, transition states and intermediates related to photodissociation of DX are characterized at the B3LYP/6-31+G(d,p) level and their energies are obtained by G3B3 method. Possible dissociative channels of the DX are proposed based on comparison of experimental AE values and theoretical predicted ones. Intramolecular hydrogen migrations are found to be the dominant processes in most of the fragmentation pathways of 1,4-dioxane.     

The research on the synthesis and structure of some new ferrocene derivatives

The reaction of C₅H₄RLi with FeCl₂ gave nine new compounds of Fe(C₅H₄R)₂ [R=C(CH₃)₂C₆H₄CH₃-p(-m,-o), C₆H₁₀C₆H₅, C(Me)₂C₆C₄OCH_3-o, C₆H₁₀C₆H₄CH₃-p(,-m,-o), C₆H₁₀C₆H₄OCH₃-p]. The compositions of compounds were determined through elementary analysis. The structural determination was made by IR and H²NMR. Mossbauer spectia were taken at room temperature. The IS and QS values are 0.41–0.45mm/s and 2.3–2.5mm/s., respectively. The solid state structure of the complex has been determined by a single crystal x-ray diffraction study, crystal data for Fe[C₅H₄C(CH₃)₂C₆H₅]₂: a=17.988(2)A, b=17. 411(2)A, c=7.496(1)A, α=β=90°, r=112.23°, Z=4, monoclinic form, space group C2/c. Our conclusions are: in π-acceptor ligand, the nucleophilic substituents decrease and the electrophilic substituts increase the metal to ligand electron cloud shift, which results in a decrease or an increase in the strength of the coordinate bonds and in the stabilization of the complexes by their steric effect.     

Comparisons of some molecular properties calculated with basis sets of Slater-type orbitals and floating spherical gaussian orbitals for BH3, BH4 -, B2H6, B4H4, C2H2, C2H4, C2H6, CH4, and C3H4

Some one-electron molecular properties are calculated for BH₃, BH₄ ^-, B₂H₆, B₄H₄, CH₄, C₂H₂, C₂H₄, C₂H₆, and C₃H₄. The wave functions used are constructed from minimal basis sets of STO's and FSGO's. The results obtained from the latter wave functions show that the good agreement with the STO values of the molecular energy is not always maintained with one-electron properties.     

甲苯光电离解离理论研究

The photoionization and dissociation photoionization of toluene have been studied using quantum chemistry methods.The geometries and frequencies of the reactants,transition states and products have been performed at B3LYP/6-311++G (d,p) level,and single-point energy calculations for all the stationary points were carried out at DFT calculations of the optimized structures with the G3B3 level.The ionization energies of toluene and the appearance energies for major fragment ions,C₇H₇⁺,C₆H₅⁺,C₅H₆⁺,C₅H₅⁺,are determined to be 8.90,11.15 or 11.03,12.72,13.69,16.28 eV,respectively,which are all in good agreement with published experimental data.With the help of available published experimental data and theoretical results,four dissociative photoionization channels have been proposed:C₇H₇⁺+H,C₆H₅⁺+CH₃,C₅H₆⁺+C₂H₂,C₅H₅⁺+C₂H₂+H.Transition structures and intermediates for those isomerization processes are determined in this work.Especially,the structures of C₅H₆⁺ and C₅H₅⁺ produced by dissociative photoionization of toluene have been defined as chain structure in this work with theoretical calculations.     

A computational study of interplay between hydride bonding and cation–π interactions: H-Mg-H···X···Y triads (X = Li+, Na+, Y = C2H2, C2H4, C6H6) as model systems

In the present study, H-Mg-H···X···Y (X = Li⁺, Na⁺ and Y = C₂H₂, C₂H₄, C₆H₆) triads have been investigated at MP2/6-311++G(2d,2p) computational level to characterise cooperative effects between hydride bonding and cation–π interactions. Molecular geometries, binding energies, cooperative energies and many-body interaction energies were evaluated. The diminutive energy values in triads with Li⁺ are larger than respective values in triads with Na⁺. The electronic properties of the complexes are analysed using parameters derived from the quantum theory of atoms in molecules methodology.     

Hartree–Fock and density functional theory study of remote substituent effects on heterolytic Fe–N bond energies of p‐G‐C6H4NHFe(CO)2(η5‐C5H5) and p‐G‐C6H4N(COMe)Fe(CO)2(η5‐C5H5)

The nature and strength of metal–ligand bonds in organotransition‐metal complexes are crucial to the understanding of organometallic reactions and catalysis. Quantum chemical calculations at different levels of theory have been used to investigate heterolytic Fe–N bond energies of para‐substituted anilinyldicarbonyl(η⁵‐cyclopentadienyl)iron [p‐G‐C₆H₄NH(η⁵‐C₅H₅)Fe(CO)₂, abbreviated as p‐G‐C₆H₄NHFp (1), where G = NO₂, CN, COMe, CO₂Me, CF₃, Br, Cl, F, H, Me, MeO, and NMe₂] and para‐substituted α‐acetylanilinyldicarbonyl(η⁵‐cyclopentadienyl)iron [p‐G‐C₆H₄N(COMe)(η⁵‐C₅H₅)Fe(CO)₂, abbreviated as p‐G‐C₆H₄N(COMe)Fp (2)] complexes. The results show that BP86 and TPSSTPSS can provide the best price/performance ratio and more accurate predictions in the study of ΔH_het(Fe–N)'s. The linear correlations [r = 0.98 (g, 1a), 0.93 (g, 2b)] between the substituent effects of heterolytic Fe–N bond energies [ΔΔH_het(Fe–N)'s] of series 1 and 2 and the differences of acidic dissociation constants (ΔpK_a) of N–H bonds of p‐G‐C₆H₄NH₂ and p‐G‐C₆H₄NH(COMe) imply that the governing structural factors for these bond scissions are similar. And the linear correlations [r = ?0.99 (g, 1c), ?0.92 (g, 2d)] between ΔΔH_het(Fe–N)'s and the substituent σ_p^? constants show that these correlations are in accordance with Hammett linear free energy relationships. The polar effects of these substituents and the basis set effects influence the accuracy of ΔH_het(Fe–N)'s. ΔΔH_het(Fe–N)'s(1, 2) follow the captodative principle. ME_{α‐COMe, para‐G}s include the influences of the whole molecules. The correlation of ME_{α‐COMe, para‐G}s with σ_p^? is excellent. ME_{α‐COMe, para‐G}s rather than ΔΔH_het(Fe–N)'s in series 2 are more suitable indexes for the overall substituent effects on ΔH_het(Fe–N)'s(2). Insight from this work may help the design of more effective catalytic processes. Copyright © 2012 John Wiley & Sons, Ltd.     

Carbon K-shell excitation of C2H2, C2H4, C2H6 and C6H6 by 2.5 keV electron impact

Energy loss spectra of 2.5 keV electrons in the region of the carbon K-edge in C₂H₂, C₂H₄, C₂H₆ and C₆H₆ are report     

Flame structure studies of rich ethylene-oxygen-argon mixtures doped with CO2, or with NH3, or with H2O

Structures of several premixed ethylene-oxygen-argon rich flat flames burning at 50 mbar have been established by using molecular beam mass spectrometry in order to investigate the effect of CO₂, or NH₃, or H₂O addition on species concentration profiles. The aim of this study is to examine the eventual changes of profiles of detected hydrocarbon intermediates which could be considered as soot precursors (C₂H₂, C₄H₂, C₅H₄, C₅H₆, C₆H₂, C₆H₄, C₆H₆, C₇H₈, C₆H₆O, C₈H₆, C₈H₈, C₉H₈ and C₁₀H₈). The comparative study has been achieved on four flames with an equivalence ratio (f) of 2.50: one without any additive (F2.50), one with 15% of CO₂ replacing the same quantity of argon (F2.50C), one with 3.3% of NH₃ in partial replacement of argon (F2.50N) and one with 13% of H₂O in replacement of the same quantity of argon (F2.50H). The four flat flames have similar final flame temperatures (1800 K).CO₂, or NH₃, or H₂O addition to the fresh gas inlet causes a shift downstream of the flame front and thus flame inhibition. Endothermic processes CO₂ + H = CO + OH and H₂O + H = H₂ + OH are responsible of the reduction of the hydrocarbon intermediates in the CO₂ and H₂O added flames through the supplementary formation of hydroxyl radicals. It has been demonstrated that such processes begin to play at the end of the flame front and becomes more efficient in the burnt gases region.The replacement of some Ar by NH₃ is responsible only for a slight decrease of the maximum mole fraction of C₂H₂, but NH₃ becomes much more efficient for C₄H₂ and C₅ to C₁₀ species. Moreover, the efficiency of NH₃ as a reducing agent of C₅ to C₁₀ intermediates is larger than that of CO₂ and H₂O for equal quantities added.     

Structure and magnetotransport properties of the new quasi-two-dimensional molecular metal β″-(BEDT-TTF)4H3O[Fe(C2O4)3] · C6H4Cl2

The β″-(BEDT-TTF)₄A^I[M^III(C₂O₄)₃] · G(A^I=NH ₄ ⁺ , H₃O⁺, K⁺, Rb⁺; M^III=Fe, Cr; G = “guest” solvent molecule) family of layered molecular conductors with magnetic metal oxalate anions exhibits a pronounced dependence of the conducting properties on the type of neutral solvent molecules introduced into the complex anion layer. A new organic dichlorobenzene (C₆H₄Cl₂)-containing conductor of this family, namely, β″-(BEDT-TTF)₄H₃O[Fe(C₂O₄)₃] · C₆H₄Cl₂, is synthesized. The structure of the synthesized single crystals studied by X-ray diffraction is characterized by the following parameters: a = 10.421(1) Å, b= 19.991(2) Å, c= 35.441(3) Å, β = 92.87(1)°, V= 7374(1) ų, space groupC2/c, and Z = 4. In the temperature range 0.5&;2-300 K, the conductivity of the crystals is metallic without changing into a superconducting state. The magnetotransport properties of the crystals are examined in magnetic fields up to 17 T at T = 0.5 K. In fields higher than 10 T, Shubnikov-de Haas oscillations are detected, and the Fourier spectrum of these oscillations contains two frequencies with maximum amplitudes of about 80 and 375 T. The experimental results are compared with the related data obtained for other phases of this family. The possible structural mechanisms of the effect of a guest solvent molecule on the transport properties of the β″-(BEDT-TTF)₄A^I[M^III(C₂O₄)₃] · G crystals are analyzed.     

Die Feldemission des wolframs nach der adsorption von Kohlenwasserstoffen

Field emission currents of electrons were measured for different planes of tungsten after the interaction of CH₄, C₂H₆, C₃H₈, and C₂H₄ at 78°K and 298°K and used to obtain work function and pre-exponential values from Fowler-Nordheim plots. A critical analysis of these data yields a conclusive result on surface potentials only if emitting areas and pre-exponentials are comparable.     

Dissociative photoionization of l-menthone: An experimental and theoretical study

The dissociative photoionization mechanism of l-menthone has been investigated with photoionization mass spectrometry using synchrotron radiation. The adiabatic ionization energy (IE) of l-menthone and the appearance energies (AE) of its major fragment ions C₉H₁₅O⁺, C₉H₁₇⁺, C₈H₁₆⁺, C₇H₁₁O⁺, C₆H₁₀O⁺, C₆H₉O⁺, C₅H₈O⁺, C₅H₁₀⁺, C₄H₆O⁺, C₅H₉⁺, C₄H₈⁺, C₄H₇⁺, C₃H₇⁺, C₃H₆⁺, C₂H₂O⁺, and CH₃⁺ are determined with their photoionization efficiency (PIE) spectra in the photon energy region of ∼8−15.5 eV. Breakdown diagrams identifying the major products are presented. Dissociative photoionization channels for formation of these fragment ions are proposed based on comparison of determined experimental appearance energies and energies predicted with the DFT calculations. According to our results, the experimental dissociation energies are in fair agreement with the theoretical values of the possible photodissociation channels of C₁₀H₁₈O.     

Flame structure of laminar premixed anisole flames investigated by photoionization mass spectrometry and photoelectron spectroscopy

Two laminar, premixed, fuel-rich flames fueled by anisole-oxygen-argon mixtures with the same cold gas velocity and pressure were investigated by molecular-beam mass spectrometry at two synchrotron sources where tunable vacuum-ultraviolet radiation enables isomer-resolved photoionization. Decomposition of the very weak O–CH₃ bond in anisole (C₆H₅OCH₃) by unimolecular decomposition yields the resonantly-stabilized phenoxy radical (C₆H₅O). This key intermediate species opens reaction routes to five-membered ring species, such as cyclopentadiene (C₅H₆) and cyclopentadienyl radicals (C₅H₅). Anisole is often discussed as model compound for lignin to study the phenolic-carbon structure in this natural polymer. Measured temperature profiles and mole fractions of many combustion intermediates give detailed information on the flame structure. A very comprehensive reaction mechanism from the literature which includes a sub-scheme for anisole combustion is used for species modeling. Species with the highest measured mole fractions (on the order of 10^?3–10^?2) are CH₃, CH₄, C₂H₂, C₂H₄, C₂H₆, CH₂O, C₅H₅ (cyclopentadienyl radical), C₅H₆ (cyclopentadiene), C₆H₆ (benzene), C₆H₅OH (phenol), and C₆H₅CHO (benzaldehyde). Some are formed in the first destruction steps of anisole, e.g., phenol and benzaldehyde, and their formation will be discussed and with regard to the modeling results. There are three major routes for the fuel destruction: (1) formation of benzaldehyde (C₆H₅CHO), (2) formation of phenol (C₆H₅OH), and (3) unimolecular decomposition of anisole to phenoxy (C₆H₅O) and CH₃ radicals. In the experiment, the phenoxy radical could be measured directly. The phenoxy radical decomposes via a bicyclic structure into the soot precursor C₅H₅ and CO. Formation of larger oxygenated species was observed in both flames. One of them is guaiacol (2-methoxyphenol), which decomposes into fulvenone. The presented speciation data, which contain more than 60 species mole fraction profiles of each flame, give insights into the combustion kinetics of anisole.     

Fullerene-C60 and crown ether doped on C60 sensors for high sensitive detection of alkali and alkaline earth cations

Fullerenes are effective acceptor components with high electron affinity for charge transfer. The significant influences of chemical adsorption of the cations on the electrical sensitivity of pristine C₆₀ and 15-(C₂H₄O)₅/C₆₀ nanocages could be the basis of new generation of electronic sensor design. The density functional theory calculation for alkali and alkaline earth cations detection by pristine C₆₀ and 15-(C₂H₄O)₅/C₆₀ nanocages are considered at B3LYP level of theory with 6–31 G(d) basis set. The quantum theory of atoms in molecules analysis have been performed to understand the nature of intermolecular interactions between the cations and nanocages. Also, the natural bond orbital analysis have been performed to assess the intermolecular interactions in detail. Furthermore, the frontier molecular orbital, energy gap, work function, electronegativity, number of transferred electron (∆N), dipole moment as well as the related chemical hardness and softness are investigated and calculated in this study. The results show that the adsorption of cations (M=Na⁺, K⁺, Mg²⁺ and Ca²⁺) are exothermic and the binding energy in pristine C₆₀ nanocage and 15-(C₂H₄O)₅/C₆₀ increases with respect to the cations charge. The results also denote a decrease in the energy gap and an increase in the electrical conductivity upon the adsorption process. In order to validate the obtained results, the density of state calculations are employed and presented in the end as well.     

Analysis of newly synthesized disulfides of aryldithiocarbonates and vanadium(V) and niobium(V) complexes of aryldithiocarbonates based on spectroscopic,thermogravimetric, SEM and DFT studies

ABSTRACT

Oxidation of the sodium salt of 2-methyl, 3-methyl, 4-methyl and 4-chloro-3-methylphenyldithiocarbonic acid by I₂ affords the disulfides of respective dithiocarbonates [(ArOCS₂)₂] (Ar?=?2-CH₃C₆H₄, 3-CH₃C₆H₄, 4-CH₃C₆H₄ and 4-Cl-3-CH₃C₆H₃. Vanadium(V) and Niobium(V) complexes of 2-methyl, 3-methyl, 4-methyl and 4-chloro-3-methylphenyldithiocarbonates have also been synthesised by one-step synthetic route. The metal salt (VOCl₃ and NbCl₅) were reacted with 2-CH₃C₆H₄, 3-CH₃C₆H₄, 4-CH₃C₆H₄ and 4-Cl-3-CH₃C₆H₃OCS₂Na in 1:2 stoichiometric molar ratio yielding the complexes corresponding to the molecular formula [(ArOCS₂)₂VO(Cl)] and [(ArOCS₂)₂NbCl₃] [Ar?=?2-CH₃C₆H₄, 3-CH₃C₆H₄, 4-CH₃C₆H₄ and 4-Cl-3-CH₃C₆H₃OCS₂)]. The compounds were characterised by elemental analyses, infrared, mass and heteronuclear NMR (¹H and ¹³C) spectroscopic studies. Thermogravimetric analysis and scanning electron microscopic analyses were also carried out for deeper investigation of the structural features. Comprehensive theoretical investigation was performed by applying density functional theory (DFT) calculations on vanadium and niobium complexes by the DFT/B3LYP/LANL2DZ method to obtain the optimised molecular geometry, vibrational frequencies, the highest occupied molecular orbital (HOMO), the lowest unoccupied molecular orbital (LUMO), thermodynamic properties and various other quantum-mechanical parameters.     

Energy absorption buildup factors of some potential bioactive compounds in the energy region 0.015–15 MeV

Kinetic energy released per unit mass relative to air and energy absorption buildup factors has been calculated for some potential bioactive compounds in the energy region of 0.015–15?MeV. The bioactive compounds of 1-aryl-3-dibenzylamino-propane-1-on hydrochloride type Mannich bases were used in this work. Aryl part was changed as C₆H₅ (1), 4-CH₃C₆H₄ (2), C₄H₃S-2-yl (3), 4-FC₆H₄ (4), 4-BrC₆H₄ (5), 4-ClC₆H₄ (6), and 4-NO₂C₆H₄ (7). The energy absorption buildup factors have been calculated for penetration depth of 40 mean free paths. It is observed that kinetic energy released per unit mass relative to air depends on the photon energy and chemical content of compounds. The compounds with least mean atomic number possess the maximum value of energy absorption buildup factors. Also, the energy absorption buildup factors are found the highest in intermediate energy, whereas the lowest in low as well as high energies.     

ESR investigation of some copper(II)-dioxime-dichloride compounds

The following copper(II)-dioxime-dichloride compounds: [Cu(G)Cl₂]₂, [Cu(P)Cl₂]₂, [Cu(DMG)Cl₂]₂ and [Cu(O)Cl₂]₂ (where G=C₂H₄O₂N₂, P=C₃H₆O₂N₂, DMG=C₄H₈O₂N₂, O=C₈H₁₄O₂N₂) were investigated by ESR method. Spectra of powder samples obtained in the g?2 region suggest the presence of triplet ground state (S=1) realized by a weak ferromagnetic exchange coupling. In liquid and frozen solutions the monomeric species (S=1/2) prevail. Some delicate changes in the coordination polyhedra symmetry in terms of ligand molecules and solvents nature were evidence. A 4p-admixture degree of 2% in the d_xy ground state was estimated for pseudotetrahedral (Td) species in frozen solutions.     

An experimental study of the premixed benzene/oxygen/argon flame with tunable synchrotron photoionization

A comprehensive experimental study of the premixed benzene/oxygen/argon flame at 4.0 kPa with a fuel equivalence ratio (?) of 1.78 has been performed with the tunable synchrotron photoionization and molecular-beam sampling mass spectrometry. Isomers of most observed species in the flame have been unambiguously identified by measurements of the photoionization efficiency spectra. Mole fraction profiles of species up to C₁₆H₁₀ have been measured at the selective photon energies near ionization thresholds, and the flame temperature profile is obtained using Pt/Pt-13%Rh thermocouple. Compared with previous studies on benzene flames by Bittner and Howard, and by Defoeux et al., a number of new species are observed in the present work. These new combustion intermediates should be included in the kinetic models of the growth of polycyclic aromatic hydrocarbons (PAHs) and benzene oxidation. Free radicals detected in the flame include CH₃, C₂H, C₂H₃, C₂H₅, C₃H, C₃H₃, C₃H₅, C₄H, C₄H₃, C₄H₅, C₄H₇, C₅H₃, C₅H₅, C₅H₇, C₆H₅, C₆H₅O, C₇H₇, and C₉H₇. More significantly, isomers of some PAHs have been identified, which should be of importance in understanding the mechanism of soot formation.     

The scattering of He from adsorbed layers of gases on Ag(110)

The adsorption of gases on Ag(110) has been studied using inelastic He atom scattering. Vibrational spectra have been obtained for Kr, Xe, C₂H₆, C₂H₄, CH₄, CF₄, CHF₃, CO₂ and H₂O. Spectra have also been obtained for multilayers of Xe (2 layers) and C₂H₆ (3 and 4 layers) where the energy changes move to lower values. The scattering from Kr and Xe can be shown to be dispersionless as has been previously found for these adsorbates on Cu(100) and Cu(110). The energy changes for Kr and Xe are smaller than on Cu surfaces and attempts were made to account for this based on an Einstein model of the adsorbed atoms in the surface holding potential.     

Hartree–Fock and density functional theory study of remote substituent effects on gas‐phase heterolytic Fe–O and Fe–S bond energies of p‐G‐C6H4OFe(CO)2(η5‐C5H5) and p‐G‐C6H4SFe(CO)2(η5‐C5H5)

The knowledge of accurate bond strengths is a fundamental basis for a proper analysis of chemical reaction mechanisms. Quantum chemical calculations at different levels of theory have been used to investigate heterolytic Fe–O and Fe–S bond energies of para‐substituted phenoxydicarbonyl(η⁵‐cyclopentadienyl) iron [p‐G‐C₆H₄O(η⁵‐C₅H₅)Fe(CO)₂, abbreviated as p‐G‐C₆H₄OFp ( 1 ), where G = NO₂, CN, COMe, CO₂Me, CF₃, Br, Cl, F, H, Me, MeO, and NMe₂] and para‐substituted benzenethiolatodicarbonyl(η⁵‐cyclopentadienyl) iron [p‐G‐C₆H₄S(η⁵‐C₅H₅)Fe(CO)₂, abbreviated as p‐G‐C₆H₄SFp ( 2 )] complexes. The results show that BP86 and TPSSTPSS can provide the best price/performance ratio and more accurate predictions in the study of ΔH_het(Fe–O)'s and ΔH_het(Fe–S)'s. The excellent linear free‐energy relations [r = 0.99 (g, 1a), 1.00 (g, 2b)] among the ΔΔH_het (Fe–O)'s and Δpk_a's of O–H bonds of p‐G‐C₆H₄OH or ΔΔH_het(Fe‐S)'s and Δpk_a's of S–H bonds of p‐G‐C₆H₄SH imply that the governing structural factors for these bond scissions are similar. And the linear correlations [r = ?0.99 (g, 1g), ?0.98 (g, 2h)] among the ΔΔH_het (Fe‐O)'s or ΔΔH_het(Fe‐S)'s and the substituent σ_p^? constants show that these correlations are in accordance with Hammett linear free‐energy relationships. The polar effects of these substituents and the basis set effects influence the accuracy of ΔH_het(Fe–O)'s or ΔH_het(Fe–S)'s. ΔΔH_het(Fe–O)'s(g) ( 1 ) and ΔΔH_het(Fe–S)'s(g)( 2 ) follow the Capto‐dative principle. The substituent effects on the Fe–O bonds are much stronger than those on the less polar Fe–S bonds. Insight from this work may help the design of more effective catalytic processes. Copyright © 2013 John Wiley & Sons, Ltd.     

Thermal stability of cubane C8H8

The reasons for the anomalously high thermal stability of cubane C₈H₈ and the mechanisms of its decomposition are studied by numerically simulating the dynamics of this metastable cluster at T = 1050–2000 K using a tight-binding potential. The decomposition activation energy is found from the temperature dependence of the cubane lifetime obtained from the numerical experiment; this energy is fairly high, E _a = 1.9 ± 0.1 eV. The decomposition products are, as a rule, either C₆H₆ and C₂H₂ molecules or the isomer C₈H₈ with a lower energy. Original Russian Text ? M.M. Maslov, D.A. Lobanov, A.I. Podlivaev, L.A. Openov, 2009, published in Fizika Tverdogo Tela, 2009, Vol. 51, No. 3, pp. 609–612.