Structure of w/o-microemulsion templated polymer networks

 The droplet phase of a water-in-oil microemulsion is used as a matrix to create amphiphilic polymer network structures from a poly(oxyethylene)-poly(isoprene)-poly(oxyethylene) triblock copolymer bearing polymerizable methacrylate end groups. Conductivity measurements and freeze fracture electron microscopy are used to obtain information about the structure of these gels. The droplet structure of the underlying microemulsion is only preserved for low droplet and polymer concentration. For higher concentrations the crosslinking reaction can induce the formation of a bicontinuous structure. Received: 6 January 1997 Accepted: 12 February 1997     

Amphiphilic Comb‐Like Poly(oxyethylene) and Its Complexes with LiClO4: Synthesis and Mesomorphic Behavior

Summary: We prepared an amphiphilic, comb‐like poly(oxyethylene) containing decyl‐tri(oxyethylene) amphiphiles in the side chain using a polymer analogous reaction to obtain a novel nonionic amphiphilic polymeric system with high molecular weight. The amphiphilic comb‐like poly(oxyethylene) itself only showed a side‐chain crystalline phase below its melting temperature of −31 °C. When the polymer was mixed with lithium perchlorate, a smectic liquid‐crystalline phase appeared. The ordered phases of the polymer and the polymer mixture were studied by differential scanning calorimetry, polarized optical microscopy, and X‐ray diffraction.

POM image (200 X) of D3OTP1 at room temperature.     

Full verification of the liquid exclusion-adsorption chromatography theory using monolithic capillary columns

Capillary electrochromatography (CEC) was used to separate alkyl phenol ethoxylates (APEs) as model diblock copolymers, with monolithic polymers as stationary phases. The order of elution indicate that the two polymer blocks follow distinct chromatographic modes: size-exclusion for the poly(oxyethylene) group and adsorption interaction for the alkyl part. Therefore, our experimental results were compared to the theory describing liquid exclusion-adsorption chromatography (LEAC). They were found in perfect agreement with the theory, which turned to be verified for the first time over the full range of polymer lengths.     

Inkjet printing of viscoelastic polymer inks

The droplet formation, the rheological properties of jettable ink and polymer inks in inkjet printing are summarized.     

Permethylated β-cyclodextrin in liquid poly(oxyethylene) as a stationary phase for capillary gas chromatography

This paper reports the study of poly(oxyethylene) as a solvent for heptakis(2,3,6-tri-O-methyl)-β-cyclodextrin (PM-β-CD) and the potential of these mixtures for constructing enantioselective gas chromatography columns. Enantioseparations of volatile racemic mixtures using capillaries coated with 10–50% PM-β-CD diluted in Carbowax 20M were evaluated. The influence of the polymer type on retention, separation and reproducibility over a period of time is critically discussed. The poly(oxyethylene)-based columns were also compared to columns prepared by dilution of PM-β-CD in two polysiloxanes, SE-30 and SE-54, at several temperatures. Finally, we evaluated a new stationary phase prepared by crosslinking the chiral selector to the poly(oxyethylene) matrix.     

Viscoelastic wormlike micellar solutions made from nonionic surfactants: structural investigations by SANS and DLS

A highly viscoelastic micellar solution of nonionic surfactants in a dilute region was recently reported. A transient network of wormlike micelles formed with the addition of short-EO-chain poly(oxyethylene) dodecyl ether surfactants (C12EO(j), j = 1-4) to poly(oxyethylene) cholesteryl ethers (ChEO(m), m = 10 and 15). A gradual increase in micellar length with an increasing C12EO(j) concentration was assumed from the results of model calculations and rheological measurements. We report in this study the results of structural investigations with small-angle neutron scattering (SANS) to confirm this assumption. Tuning from spherical to wormlike and to locally flat structures can be achieved by way of three methods. One can either increase the C12EO(j) concentration or decrease j (smaller headgroup size) at a fixed concentration of C12EO(j). The third possibility is to increase the temperature at a fixed composition. All three methods result in the same structural transition. The formation of a transient network of wormlike micelles analogous to polymer solutions can be observed with dynamic light scattering (DLS). A stretched exponential approach was applied to fit the correlation functions.     

SYNTHESIS AND CHARACTERIZATION OF POLYSILOXANE CONTAINING OLIGO(OXYETHYLENE)SULFATE SALT

Solvent-free polymeric alkali-metal ion conductors, consisting of a comb-like polysiloxane with oligo(oxy-ethylene) side chains and pendant sulfate groups were synthesized by the hydrosilylation of allyl oligo(oxyethylene) sulfatesalt and allyl methoxy oligo(oxyethylene) with poly(methylhydrosiloxane). The factors influncing the ionic conductivity ofthe resulting polymer such as the electrolyte content and the nature of the alkali-metal were investigated. The temperaturedependence of conductivity was determined, and the ionic conductivity of the polymer follows the Vogel-Tammann-Fulcher(VTF) equation.     

Thermoresponsive amphiphilic symmetrical triblock copolymers with a hydrophilic middle block made of poly(N-isopropylacrylamide): synthesis, self-organization, and hydrogel formation

Several series of symmetrical triblock copolymers were synthesized by the reversible addition fragmentation chain transfer method. They consist of a long block of poly(N-isopropylacrylamide) as hydrophilic, thermoresponsive middle block, which is end-capped by two small strongly hydrophobic blocks made from five different vinyl polymers. The association of the amphiphilic polymers was studied in dilute and concentrated aqueous solution. The polymer micelles found at low concentrations form hydrogels at high concentrations, typically above 30–35 wt.%. Hydrogel formation and the thermosensitive rheological behavior were studied exemplarily for copolymers with hydrophobic blocks of polystyrene, poly(2-ethylhexyl acrylate), and poly(n-octadecyl acrylate). All systems exhibited a cloud point around 30 °C. Heating beyond the cloud point initially favors hydrogel formation but continued heating results in macroscopic phase separation. The rheological behavior suggests that the copolymers associate into flower-like micelles, with only a small share of polymers that bridge the micelles and act as physical cross-linkers, even at high concentrations.     

Thermotropic behavior of poly(oxyethylene) cholesterol ethers

The thermotropic behavior of poly(oxyethylene) cholesterol ether surfactants was studied by differential scanning calorimetry and small-angle X-ray scattering. Contrary to what is usually observed in conventional poly(oxyethylene)-type surfactant systems, poly(oxyethylene) cholesterol ether surfactants show a change of the fusion mechanism as the chain length is varied. For long chain lengths (n > or = 15) the usual solid-liquid transition is found, but for short chain lengths (n < or = 10) the transition goes through a birefringent lamellar phase. The appearance of this liquid crystal (LC) phase seems to be related with the predominance of the cholesterol part in the short chain polyoxyethylene surfactants. On the contrary, for long polyexyethylene chains the polymer gains in importance and only a solid crystalline structure is observed at low temperatures. An antiparallel packing structure with totally overlapped chains is found for both, the solid and the LC phase. The chains seem to be in a zigzag configuration, and only for the longest surfactant here studied (n = 30) a change of the chain configuration to a much shorter meander configuration is observed.     

Synthesis of poly(oxyethylene phosphoramidate)s and glycopolymers via Staudinger reaction: Multivalent binding studies with Concanavalin A

A new method for the preparation of poly(oxyethylene phosphoramidate)s and glycopolymers is developed via modification of poly(oxyethylene H‐phosphonate) which is a biodegradable, biocompatible and low toxic polymer. The phosphonate groups of the precursor are converted into tri‐coordinated phosphorus species yielding poly(oxyethylene trimethylsilyl phosphite). The latter is then reacted with different azides, including sugar azides, via Staudinger reaction to furnish the desired poly(oxyethylene phosphoramidate)s and such containing sugar moieties in the side chains attached to the P‐centers. 2002P NMR spectroscopy is applied as a powerful tool for determination of the conversion and structure of the reaction products. Studies on Concanavalin A binding to the obtained glycopolymers are performed using dynamic light scattering and analytical ultracentrifugation techniques. The viability of Human Embryonic Kidney 293 cell line is slightly affected when exposed to polyphosphoramidate glucoconjugate over a broad range of concentrations. The results obtained are encouraging for further investigations on the clustering and bio‐recognition properties of the synthesized glycopolymers. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1730–1741     

Hydration of short-chain poly(oxyethylene) in carbon tetrachloride: an infrared spectroscopic study

Hydration of short-chain poly(oxyethylene)s, CH(3)(OCH(2)CH(2))(m)OCH(3) (abbreviated as C(1)E(m)()C(1)) (m = 1-3), in carbon tetrachloride has been studied by infrared spectroscopy. The O-H stretching vibrations of water in ternary solutions with H(2)O:C(1)E(m)C(1):CCl(4) mole ratios of 0.000418:0.005:0.995 to 0.000403:0.04:0.96 were analyzed. Two types of hydrogen bonds are formed in the interaction between water and C(1)E(m)C(1) in carbon tetrachloride; one is a monodentate hydrogen bond, in which only one of the O-H bonds of a water molecule participates in hydrogen bonding, and the other is a bidentate hydrogen bond, in which both of the O-H bonds of a water molecule participate in hydrogen bonding by bridging oxygen atoms separated by two or more monomer units on the polymer chain. An important finding is that the bidentate hydrogen-bond bridge is not formed between the nearest-neighbor oxygen atoms. This experimental observation supports the results of previous molecular dynamics simulations. The shortest oligomer of poly(oxyethylene), i.e., CH(3)OCH(2)CH(2)OCH(3) (1,2-dimethoxyethane) with a single monomer unit, is suggested not to be an adequate model for this polymer with respect to hydrogen bonding to water. The hydrogen bonding in a 1:1 C(1)E(m)C(1)-water adduct in carbon tetrachloride represents primitive incipient hydration of poly(oxyethylene). The present results indicate that both monodentate and bidentate hydrogen bonds are important and the latter is destabilized more rapidly than the former with increasing temperature. This dehydration process can be a potential mechanism of the poly(oxyethylene)-water phase separation.     

Synthesis and Characterization of Poly(Oxyethylene)S with (2-Benzoxazolon-3-yl)Acetyl End-Groups. Complex Formation with Polycarboxylic Acids

Abstract

Chemical modification of poly(oxyethylene)s (MW from 600 Da to 3000 Da), leading to the obtaining of poly(oxyethylene)s with (2-benzoxazolon-3-yl)acetyl endgroups, is described. The corresponding diesters were synthesized in high yields-70—84% and degree of esterification-82—92% under mild conditions in the presence of dicyclohexylcarbodiimide and 4-dimethylaminopyridine as catalyst. The diesters were characterized by ¹H-NMR, ¹³C-NMR and IR spectra, and SEC analysis. The relatively narrow molecular weight distribution was retained in the process of chemical modification. The complex formation between polyacrylic or polymeth-acrylic acids and (2-benzoxazolon-3-yl)acetyl derivatives of poly -(oxyethylene)s was studied in dilute aqueous solutions by potentio-metric titration and viscometry. The presence of (2-benzoxazolon-3-yl)acetyl end groups attached to the poly(oxyethylene)s chains results in a significant decrease of the critical poly(oxyethylene) chain length necessary for the formation of stable polymer-polymer complexes.     

Electrochemical characteristics of the blended polymer electrolytes containing lithium salts

Blend-based polymer electrolytes composed of poly(ethylene oxide), poly(oligo[oxyethylene]oxysebacoyl), and lithium salts have been prepared. These polymer electrolytes have been investigated in terms of ionic conductivity, transport number, and interfacial characteristics of the lithium electrode in contact with the polymer electrolyte. The influences of the blend composition, the salt used, and its concentration on the electrochemical behavior were studied. © 1996 John Wiley & Sons, Inc.     

A light scattering study of the influence of poly(ethylene glycol) on the droplet size and the interdroplet interaction in a water-in-oil-microemulsion

Dynamic and static light scattering techniques were used to study the droplet size and the interdroplet interaction of w/o microemulsions consisting of cetyltrimethyl-ammonium bromide (CTAB), hexyl carbitol, toluene, water and poly(ethylene glycol). The results were analyzed in terms of a hard-sphere model with a perturbation. For the microemulsions without polymer, their droplet sizes increased only slightly (R=10.1 to 11.0 nm) and the perturbation became more attractive as the molar ratio of H₂O/CTAB was raised from 50 to 82. In contrast, an increase in polymer concentration or polymer molecular weight not only increased the droplet sizes but also changed the perturbation to become more repulsive. In addition, it is envisaged that the interactions between the cationic groups of CTAB and the ether linkages of the poly(ethylene glycol) may also enhance the rigidity of the interfaces, hence the stability of the microemulsions.     

Synthesis of poly(oxyethylene phosphonate)s bearing oxirane groups in the side chain

The interaction between poly(oxyethylene phosphonate)s and 1,2-epoxy-7-octene has been investigated. It has been established that in the presence of benzoyl peroxide there proceeds a selective addition of the P( )H group to the C()C double bond. Poly(oxyethylene phosphonate)s bearing oxirane groups in the side chain have been synthesized. The new polymers can be used as polymer carriers of drugs. © 1997 John Wiley & Sons, Inc.     

Phase transitions in aqueous triblock copolymers: NMR relaxation studies

Longitudinal NMR relaxation times were used to investigate the thermal transitions occurring in an aqueous triblock copolymer of the poly(oxyethylene)–poly(oxypropylene)–poly(oxyethylene) family. In such a system molecule–micelle and micelle–liquid crystal transitions are observed, depending on temperature and composition. The longitudinal relaxation time, R ₁, significantly changes when the aforementioned phase transitions take place. In the case of molecule–micelle equilibrium, changes in R ₁ values of the methyl (and methynic) group signal, located in the lipophilic portion of block copolymers, are observed. The effect is ascribed to a significant dehydration of the poly(oxypropylene) chains, as a consequence of micelle formation. Conversely, the thermal transitions from micelles to liquid-crystalline phases are associated with significant changes in the relaxation time of poly(oxyethylene) units. The latter effect is tentatively ascribed to a partial dehydration and/or interdigitation of the poly(oxyethylene) moieties in the block copolymer.     

Oil-continuous microemulsions mixed with an amphiphilic graft copolymer or with the parent homopolymer Polymer–droplet interactions as revealed by phase behavior and light scattering

Polymer–droplet interactions have been studied in AOT/water/isooctane oil-continuous microemulsions mixed with an amphiphilic graft copolymer, or with the parent homopolymer (AOT = sodium bis(2-ethylhexyl) sulfosuccinate). The graft copolymer has an oil-soluble poly(dodecyl methacrylate) backbone and water-soluble poly(ethylene glycol) side chains. Pseudo-ternary polymer/droplet/isooctane phase diagrams have been established for both the parent homopolymer and the graft copolymer, and the two types of mixture display entirely different phase behavior. The homopolymer–droplet interaction is repulsive, and a segregative phase separation occurs at high droplet concentrations. By contrast, the graft copolymer–droplet interaction is attractive: the polymer is insoluble in the pure oil, but dissolves in the microemulsion. A comparatively high concentration of droplets is required to solubilize even small amounts of polymer. Static and dynamic light scattering has been performed in order to obtain information on structure and dynamics in the two types of mixture. For optically matched microemulsions, with a vanishing excess polarizability of the droplets, the polymer dominates the intensity of scattered light. The absolute intensity of scattered light increases as phase separation is approached owing to large-scale concentration fluctuations. Dynamic light scattering shows two populations of diffusion coefficients; one population originates from “free” microemulsion droplets and the other from the polymer (for homopolymer mixtures) or from polymer–droplet aggregates (for mixtures with the graft copolymer). The graft copolymer forms large polymer–droplet aggregates with a broad size distribution, which coexist with a significant fraction of free droplets.     

Synthesis and Ionic Conductivity of Network Polymer Electrolytes with Internal Plasticizers

Network polymer electrolytes with free oligo(oxyethylene) chains as internal plasticizers were prepared by cross-linking poly(ethylene glycol) acrylates. The effects of salt concentration and properties of internal plasticizers on ionic conductivity were studied.     

Influence of cross-link density on rheological properties of temperature-sensitive microgel suspensions

The influence of the cross-link density on rheological properties of thermosensitive microgels was investigated. The temperature-sensitive hydrogel particles consisted of poly (N-isopropylacrylamide) (PNiPAM) chemically cross-linked with several different molar ratios of N,N′-methylenebisacrylamide. The variation of cross-link density leads to soft spheres that possess a different particle interaction potential and a different swelling ratio. With increasing temperature the microgel particles decrease in size and with it the effective volume fraction, which leads to strong changes in rheological properties. The relative zero-shear viscosity and the plateau modulus at different temperatures superpose to mastercurves when plotted versus the effective volume fraction. Up to an effective volume fraction of 0.5 the microgels behaved like hard spheres and the maximum volume fraction, as determined from the divergence of the zero-shear viscosity, was mainly dominated by the polydispersity of the spheres and not by the cross-link density. The plateau modulus, on the other hand, revealed soft-sphere behavior and the interaction potential became softer with decreasing cross-linker content. Received: 15 December 1999 Accepted: 15 February 2000     

Concentrated reverse micelles in a random graft block copolymer system: structure and in-situ synthesis of silver nanoparticles

The structure and rheological properties of a poly(dimethylsiloxane)-graft-poly(oxyethylene) copolymer at high concentrations in block-selective solvents were studied by small-angle X-ray scattering (SAXS) and rheometry. Analysis of SAXS data indicates that quasispherical, reverse micellar aggregates (with no ordered packing) are present in concentrated solutions of the copolymer in nonpolar solvents, and that upon addition of water, the size of such aggregates increases due to the solubilization inside the micellar cores. The viscosity of concentrated polymer solutions increases exponentially as water is added, and finally, viscoelastic, gel-like behavior is found in the vicinity of the phase separation limit. It was found that small silver nanoparticles with an average diameter of ≈3 nm can be synthesized inside the copolymer aggregates without the need of a reducing agent; namely, particles embedded in a viscoelastic matrix are obtained. The synthesis seems to follow first-order kinetics. Electronic supplementary material Supplementary material is available in the online version of this article at and is accessible for authorized users.