Fourfold tetraurea calix[4]arenes--potential cores for the formation of self-assembled dendrimers

Wide rim tetraurea calix[4]arenes monofunctionalized at the narrow rim by COOH or NH2 have been synthesized in five steps from t-butylcalix[4]arene tripropylether. Their covalent linkage via the narrow rim to a central calix[4]arene fixed in the 1,3-alternate conformation led to pentacalix[4]arenes 9 bearing four tetraurea derivatives in the cone conformation in a flexible tetrahedral arrangement. Their self-assembly via the formation of hydrogen bonded dimeric capsules has been studied under different conditions. A fourfold heterodimerisation of tetrakis-tetraurea derivatives of type 9 with tetratosylurea 10 has been confirmed by 1H NMR-spectroscopy and dynamic light scattering.     

Rational synthesis of multicyclic bis[2]catenanes

Bis-loop tetraurea calix[4]arene 6 has been prepared by acylation of the wide-rim calix[4]arene tetraamine 1 with the activated bis(urethane) 8 under dilution conditions. Similarly the bis(Boc-protected) tetraamine 2 is converted into the mono-loop derivative 3 which after deprotection and acylation gives the bisalkenyl derivative 5. In apolar solvents this tetraurea calix[4]arene 5 forms regioselectively a single hydrogen-bonded homodimer, from which the bis[2]catenane 10a is formed in 49% by a metathesis reaction followed by hydrogenation. Bis-loop derivative 6 forms no homodimers for steric reasons, but a stoichiometric mixture with the open-chain tetraalkenyl derivative 7a contains exclusively the heterodimer. Metathesis and subsequent hydrogenation now yields 65 % of the pure bis[2]catenane 10a which could not be isolated from the complex reaction mixture obtained from the homodimer 7a.7a. The chirality of 10a (D(2) symmetry) has been verified by optical resolution using HPLC on a chiral stationary phase.     

含噻二唑官能基的对叔丁基硫桥杯[4]芳烃衍生物的合成及结构

以对叔丁基硫桥杯[4]芳烃(1)为原料, 在碳酸钾存在下与碘甲烷反应, 生成1,3-二取代桥杯[4]芳烃(2), 其分别与1,2-二溴乙烷, 1,3-二溴丙烷在碳酸钾的存在下进行烷基化反应, 生成硫桥杯[4]芳烃衍生物3和4. 在氢氧化钠存在下,其与过量的含不同官能团的2-巯基-1,3,4-噻二唑反应, 生成下缘含1,3,4-噻二唑基的硫桥杯[4]芳烃衍生物5a, 5b, 6a和6b, 并通过了¹H NMR, ¹³C NMR, IR, MS和元素分析的确证. 同时, X射线分析确定了硫桥杯[4]芳烃3和5a的晶体结构.     

Dimeric Capsules Formed by Tetra‐CMPO Derivatives of (Thia)Calix[4]arenes

Thiacalix[4]arene 2 , calix[4]arene 3 a and its tetraether fixed in the cone conformation 3 b form homo‐ and heterodimeric capsules in apolar solvents, which are held together by a seam of NH???O=P hydrogen bonds between carbamoylmethyl phospine oxide functions attached to their wide rim. Their internal volume of ～370 ų requires the inclusion of a suitable guest. Although neutral molecules such as adamantane (derivatives) or tetraethylammonium cations form kinetically stable complexes (¹H‐ and ³¹P‐time scale), the included solvent is rapidly exchanged. The internal mobility of the included tetraethylammonium cation is distinctly higher (ΔG=42.5 and 49.7 kJ mol^?1 for 3 a and 3 b ) than that for similar capsules of tetraurea calix[4]arenes 1 . Mixtures of 1 with 2 , 3 a , or 3 b contain only the two homodimers but the heterodimerization occurs with the tetraloop tetraurea 6 , which cannot form homodimers. Two dimers with cationic guests ( 2? (C₅H₅)₂Co⁺ ?2 and 3 a? Et₃NH⁺ ? H₂O ?3 a ) were confirmed by single‐crystal X‐ray analysis.     

杯[4]芳烃黄原酸酯衍生物的合成与阳离子萃取性能

以二氧六环作溶剂, 杯[4]芳烃二甲氧基二羟乙氧基衍生物2与氢氧化钾、二硫化碳作用合成了杯芳烃黄原酸盐衍生物3, 并进一步与碘甲烷或氯化苄反应首次合成了含黄原酸酯基的杯芳烃衍生物4a和4b. 阳离子萃取试验表明该新型杯芳烃衍生物比单硫杂杯芳烃衍生物具有更好的过渡金属离子萃取性能.     

含酰胺和席夫碱单元的杯[4]芳烃衍生物的合成与配合性能

杯[4]-1,3-二乙酸乙酯衍生物1与水合肼反应生成杯[4]芳烃酰肼衍生物2, 然后进一步与相应的芳醛反应, 高产率地合成了三个新型的含酰胺和席夫碱单元的杯[4]芳烃衍生物3a～3c和一例新型杯[4]冠醚4. 阳离子萃取实验表明新型杯芳烃衍生物比只含有酰胺基或席夫碱基的杯芳烃衍生物有更强的软金属离子配合性能, 杯[4]冠醚4还对Ag^＋有较好的选择性萃取能力.     

(硫杂)杯[4]芳烃缩氨基(硫)脲(桥联)衍生物的合成

对叔丁基(硫杂)杯[4]芳烃-1,3-二醛基衍生物4a和4b与苯基氨基硫脲进行“1＋2”缩合反应, 合成了杯[4]芳烃缩氨基硫脲衍生物5a和5b, 产率为84%和85%. 化合物4a和4b与1,6-己基双氨基脲发生“1＋1”缩合反应, 合成了杯[4]芳烃双缩氨基脲桥联衍生物6a和6b, 产率为83%和80%. 新化合物的结构与构象经元素分析、质谱、核磁共振谱等表征证实.     

Synthesis of Schiff Base Calix [4] arene Crowns

This letter reports the synthesis of Schiff base calix [4] arene crowns containing m-xylylene phenol subunit, in which calix [4] arene Schiff base crowns 2a,2b and 2c were formed by 1:1 condensation of calix [4] arene diamine 1 with dialdehydes (2,6-diformyl-4-chlorophenol 3a,2,6-diformyl-4-methylphenol 3b,2,6-diformyl-4-tert-butylphenol 3c)under high dilute condition in refluxing anhydrous ethanol in 65-70% yield.     

Effect of the glutaraldehyde derivatives of Calix[n]arene as cross-linker reagents on lipase immobilization

Synthesis of the glutaraldehyde derivatives calix[n]arene (n = 4,6,8) (Calix[n]-GA) and using as cross-linkers for immobilization of Candida rugosa lipase (CRL) have been discussed in this paper. The amino functional calix[n]arene derivatives (Calix[n]-NH ₂) were synthesized via reduction of dinitrile, hexanitrile and octanitrile derivatives of calix[n]arenes. These amino functional calix[n]arene derivatives (Calix[n]-NH ₂) were converted to their aldehyde derivativatives with glutaraldehyde. The calix[n]arene derivatives were used in lipase immobilization in order to see the role of calix[n]arene binding site on the lipase activitiy and stability. The activity recovery of calix[n]arene-supported lipases (Calix[n]-CRL) based on the Calix[4]-CRL, Calix[6]-CRL and Calix[8]-CRL reaches to 53.5, 66.1 and 76.4%, respectively.     

Supramolecular incorporation of fullerenes on gold surfaces: comparison of C60 incorporation by self-assembled monolayers of different calix[n]arene (n = 4, 6, 8) derivatives

[reaction: see text] Two new calix[6]arene derivatives 3 and 4 in a 1,4-anti conformation and one calix[8]arene derivative 5 were synthesized. SAMs of calix[n]arene (n = 4, 6, 8) derivatives 1-5 were formed on gold bead electrodes. Cyclic voltammetry with Ru(NH3)6(3+/2+) as a redox probe, together with impedance spectroscopy and reductive desorption, indicates that SAMs of 5 have a higher coverage than those of 3 and 4 due to the presence of hydrogen bonding and possibly its conformation. Noncovalent immobilization of C60 on gold surfaces was achieved with SAMs of calix[8]arene derivative 5 but not with those of 1-4.     

Synthesis and crystal structure of uranium(IV) complexes with calix[n]arenes (n = 4, 6 and 8): mononuclear, polynuclear and 1D polymeric species

Reactions of UCl4 with calix[n]arenes (n = 4, 6) in THF gave the mononuclear [UCl2(calix[4]arene - 2H)(THF)2].2THF (.2THF) and the bis-dinuclear [U2Cl2(calix[6]arene - 6H)(THF)3]2.6THF (.6THF) complexes, respectively, while the mono-, di- and trinuclear compounds [Hpy]2[UCl3(calix[4]arene - 3H)].py (.py), [Hpy](4)[U2Cl6(calix[6]arene - 6H)].3py (.3py), [Hpy]3[U2Cl5(calix[6]arene - 6H)(py)].py (.py) and [Hpy]6[U3Cl11(calix[8]arene - 7H)].3py (.3py) were obtained by treatment of UCl4 with calix[n]arenes (n = 4, 6, 8) in pyridine. The sodium salt of calix[8]arene reacted with UCl4 to give the pentanuclear complex [U{U2Cl3(calix[8]arene - 7H)(py)5}2].8py (.8py). Reaction of U(acac)4 (acac = MeCOCHCOMe) with calix[4]arene in pyridine afforded the mononuclear complex [U(acac)2(calix[4]arene - 2H)].4py (.4py) and its treatment with the sodium salt of calix[8]arene led to the formation of the 1D polymer [U2(acac)6(calix[8]arene - 6H)(py)4Na4]n. The sandwich complex [Hpy]2[U(calix[4]arene - 3H)2][OTf].4py (.4py) was obtained by treatment of U(OTf)4 (OTf = OSO2CF3) with calix[4]arene in pyridine. All the complexes have been characterized by X-ray diffraction analysis.     

Synthesis and photochemical reaction of cyclic oligomers: Synthesis and photopolymerization of novel C‐methylcalix[4]resorcinarene and p‐alkylcalix[n]arene derivatives containing spiro ortho ether groups

New photoreactive calixarene derivatives containing spiro ortho ester groups (calixarenes 3a–3c ) were synthesized by the reaction of 2‐bromomethyl‐1,4,6‐trioxaspiro[4.4]nonane with 2,8,14,20‐tetramethyl‐4,6,10,12,16,18,22,24‐octakis(carboxymethoxy)calix[4]resorcinarene, 5,11,17,23,29,35‐hexamethyl‐37,38,39,40,41,42‐hexakis(carboxymethoxy)calix[6]arene, and 5,11,17,23,29,35,41,47‐octa‐tert‐butyl‐49,50,51,52, 53,54,55,56‐octakis‐(carboxymethoxy)calix[8]arene, which were prepared by the reaction of C‐methylcalix[4]resorcinarene, p‐methylcalix[6]arene, and p‐tert‐butylcalix[8]arene, respectively. The thermal stability of the obtained calixarene derivatives containing spiro ortho ester groups was examined with thermogravimetric analysis, and it was found that these calixarene derivatives had good thermal stability. The photoinitiated cationic polymerization of spiro ortho ester groups in calixarene derivatives 3a–3c was examined with certain photoacid generators in the film state. Interestingly enough, the reaction of calixarene derivatives did not proceed with only photoirradiation; however, the reaction proceeded smoothly when the photoirradiation was followed by heating. Furthermore, calixarene 3a , composed of a C‐methylcalix[4]resorcinarene structure, showed the highest photochemical reactivity in this reaction system. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1293–1302, 2002     

Phosphorus-based p-tert-butylcalix[5]arene ligands

New calix[5]arene trivalent phosphorus derivatives have been synthesized which should be excellent ligands with which to study and control the interaction of a ligand atom with a metal. The larger cavity of the calix[5]arene (compared to calix[4]arene) provides a good balance between constraint and flexibility. Treatment of p-tert-butylcalix[5]arene with 2 equiv of either tris(dimethylamino)phosphine or dichlorophenylphosphine inserts two RP moieties into the calix[5]arene framework to give calix[5](PR)2(OH) (1, R = Me2N; 2, R = Ph). Further treatment of 1 with 4 equiv of HCl gives calix[5](PCl)2(OH) (3). Heating a solution of the monophosphorus compound calix[5](PNMe2)(OH)3 (4) releases dimethylamine to yield both monomeric calix[5](P)(OH)2 (6) and dimeric [calix[5](P)(OH)2](2) (7), the latter having a tubelike geometry. X-ray crystallographic studies confirm the structures and show that 1 and 2 have approximate cone conformations while 3 has an approximate 1,2-alternate conformation. The orientations of the phosphorus lone pairs and oxygen atoms in all derivatives provide a framework for both soft and hard ligand interactions within the calix[5]arene.     

Exclusive self-assembly of a polar dimeric capsule between tetraurea calix[4]pyrrole and tetraurea calix[4]arene

The exclusive self-sorting observed in the self-assembly process between tetraurea benzyl calix[4]pyrroles and tetraurea tolyl calix[4]arene to afford unprecedented hybrid dimeric capsules with polar interiors is described. The coencapsulation of a solvent molecule with an organic guest yields four particle aggregates in which the guests are confined and restricted into single hemispheres due to the polar requirements of the internal cavity.     

New water-soluble host molecules derived from calix[6]arene

4-Sulfonate derivatives of calix[6]arene and O-n-hexylcalix[6]arene (1a and 1b, respectively) were synthesized. Measurements using fluorescence and absorption spectral probes indicated that the cavity of calix-[6]arene can accept a naphthalene molecule but not a pyrene molecule and that (1b) has a hydrophobic cavity constructed from the aggregate of the hexyl groups while (1a) provides a reaction field apparently more polar than water. This is the first example for water-soluble host molecules derived from calix[6]arene.     

Origins of cooperative noncovalent host-guest chemistry in mixed valence complexes

The electronic effects resulting from noncovalent host-guest interactions between calix[6]arene and a ruthenium dimer, [Ru3O(OAc)6(CO)(ppy)]2-mu-pz (ppy=4-phenyl pyridine, pz=pyrazine), are presented. The noncovalent interaction is between the calix[6]arene and the ppy ligands of the dimer. The dimer can bind 2 equiv of calix[6]arene. The complex [Ru3O(OAc)6(CO)(ppy)]2-mu-pz forms a highly stable mixed valence ion with strong electronic coupling between the two Ru3 clusters. The strength of the electronic interaction is found to be moderated by calix[6]arene binding. Addition of calix[6]arene to the mixed valence ion causes the electronic coupling to decrease. The binding of calix[6]arene is found to be cooperative. The origins of cooperative binding are developed in terms of the potential energy surfaces associated with the symmetric and asymmetric mixed valence ion. In particular, it is found that symmetry breaking (through the binding of a single calix[6]arene) destabilizes the mixed valence state. Restoration of symmetry (through the binding of a second calix[6]arene) increases the stability of the mixed valence ion and provides an additional driving force for the binding of the second calix[6]arene.     

Aminolysis reaction of calix [ 4 ] arene esters and crystal structures and conformational behaviors of calix[4]arene amides

We first make use of aminolysis of calix[4]arene esters to synthesize calix[4]arene amides. When the two ethyl esters of the calix[4]arene esters are aminolysized, the 1, 3-amide derivative is formed selectively. The crystal structures of the calix-[4]arene with two butyl amide (3b) and four butyl amide moieties (4b) were determined. The intermolecular hydrogen bonds make 4b form two-dimensional net work insolid state. The 1H NMR spectra prove that 3b is of a pinched cone conformation, while 4b and tetraheptylamide-calix[4]arene (6b) take fast interconversion between two C2v isomers in solution and appear an apparent cone conformation at room temperature. As decreasing temperature, the interconversion rate decreases gradually and, finally, the interconversion process is frozen at Tc = -10℃, which makes both conformations of 4b and 6b the pinched cone structures. The hydrogen bond improves the interconversion barrier, and the large different values of the potential barrier between 6b and 4b (or 6b) may     

Synthesis and characterization of diametrically substituted tetra-O-n-butylcalix[4]arene ligands and their chelated complexes of titanium,molybdenum, and palladium

The ligation properties of three new upper-rim-substituted calix[4]arene ligands, 5,17-bis(hydroxymethyl)-tetra-n-butoxycalix[4]arene ((HOCH2)2-nBu4Clx, 7), 5,17-bis((diphenylphosphinito)methoxy)-tetra-n-butoxycalix[4]arene ((PPh2OCH2)2-nBu4Clx, 8), and 5,17-bis((diphenylphosphino)methyl)-tetra-n-butoxycalix[4]arene ((PPh2CH2)2-nBu4Clx, 10) are reported herein. The newly prepared compounds differ from previously reported diametrically substituted calix[4]arene derivatives in that the lower-rim substituent was n-butyl. The presence of this lower-rim substituent did not reduce the inherent crystallinity of these complexes as purification of all materials occurred via simple crystallizations. The key precursor for the syntheses of 8 and 10 was 7, acquisition of which occurred in six steps starting from tetra-tert-butylcalix[4]arene, 1. Calix[4]arene derivatives include, tetra-n-butoxycalix[4]arene (nBu4Clx, 3), 5,11,17,23-tetrabromo-tetra-n-butoxycalix[4]arene (Br4-nBu4Clx, 4), 5,17-dibromo-tetra-n-butoxycalix[4]arene (Br2-nBu4Clx, 5), 5,17-bis(formyl)-tetra-n-butoxycalix[4]arene ((CHO)2-nBu4Clx, 6), and 5,17-bis(chloromethyl)-tetra-n-butoxycalix[4]arene ((ClCH2)2-nBu4Clx, 9), all of which were synthesized using modifications of existing procedures. Characterization of all compounds occurred, when possible, using 1H, 13C, and 31P NMR, elemental analyses, FAB-MS, ESI-MS, FT-IR, and X-ray crystallography. The solid-state structures of all calix[4]arene intermediates and ligands showed that the annulus adopted the pinched-cone conformation in which the average C(5)...C(17) intraannular separation was 4.5 +/- 0.4 A. Reaction of 7 with CpTiMe3 yielded the cis-chelate, CpTi(Me)[(OCH2)2-nBu4Clx] (11), quantitatively. Data obtained using ESI-MS (positive-ion mode) confirmed the monomer formulation showed above, and 1H NMR spectra provided sufficient information to deduce the nature of the Ti coordination sphere. Reaction of 8 with cis-Cl2Pd(NCPh)2 in refluxing benzene afforded cis-Cl2Pd[(PPh2OCH2)2-nBu4Clx] (12) in good yields. The monomeric identity of this compound was verified by both X-ray crystallography and positive-ion ESI-MS. The cis-bidentate calix[4]arene ligand did not undergo any noticeable contortion upon chelation of the PdCl2 fragment. Acid-promoted decomposition of 12 occurred in the presence of adventitious HCl and gaseous HCl, and the products of this decomposition were 9 and [mu2-ClPd(PPh2OH)(PPh2O)]2. In addition, chelates of 8 that contained Mo(CO)3L (L = NCMe (14a), NCEt (14b), and CO (14c)) showed that the mode of coordination was relatively insensitive to the identity of the metal. X-ray crystallography afforded views of the solid-state structures of 14b,c and, like 12, showed that the Mo(CO)3L fragment resided above the pinched-cone of the calix[4]arene. 1H NMR revealed that C-H/pi interactions existed between L (14a,b) and a phenyl ring of the coordinated phosphinite. Finally, the bis(diphenylphosphine)calix[4]arene ligand (10) readily coordinated the Mo(CO)3L species, but the reaction did not go to completion, as evidenced by 1H NMR, even after a 5 day reaction time. Data suggest that the product is similar to that observed for 12 and 14, but the incomplete reaction complicated attempts to obtain pure material and prohibited definitive assignment of the coordination array.     

Calix[4]arenes with two different chemical modifications at the bridges

Hexabromocalix[4]arene derivatives (3a and 3b) possessing pairs of dibromomethylene and bromomethylene groups located at distal or proximal positions of the calix scaffold were prepared via photochemical bromination of tetramethoxycalix[4]arene. The dibromomethylene groups undergo hydrolysis to afford calix[4]arenes possessing pairs of carbonyl groups and bromomethylene groups located at distal or proximal bridges (4a and 4b, respectively). The bromomethylene groups of 4 undergo reactions with nucleophiles under S(N)1 conditions to afford a wide array of derivatives possessing two different chemical modifications at the bridges.     

First synthesis and structure of beta-ketoimine calix[4]arenes: complexation and extraction studies

The synthesis of a new series of beta-ketoimine calix[4]arene derivatives is described. The reaction of calix[4]arene or p-tert-butylcalix[4]arene with bromoacetonitrile or bromobutyronitrile afforded di-, tri-, and tetranitrile calixarene derivatives (3-8, 3a), which were then reduced into the corresponding amine (9-13, 3b). The condensation of these aminocalixarenes with acetylacetone led to six beta-ketoimine calix[4]arene derivatives (14-18, 3c) as a class of selective receptors toward transition metals. Molecular structures of 4, 7, and 17 have been determined by X-ray diffraction. The packing of 17 revealed a network of intramolecular and intermolecular hydrogen bonds. The complexation properties of receptors 15, 17, and 3c toward different metal ions have been investigated by UV-vis titrations in organic media. The stoichiometries of complexes with 17 were determined by both the mole ratio method and Job plots. These novel receptors selectively complex Cu2+, Hg2+, and Ag+. Moreover, the extraction properties of 17 toward cations have been studied by liquid-liquid extraction and atomic absorption spectrometry. Compound 17 has good affinity and selectivity toward Pb2+.