Novel fluorescent amphiphilic block copolymers: Controllable morphologies and size by self-assembly

New fluorescent amphiphilic copolymers polyacrylamide-b-poly(p-methacrylamido)acetophenone thiosemicarbazone (PAM-b-PMATC) were synthesized by atom transfer radical polymerization (ATRP) method. The structures of polymers were confirmed by ¹H NMR and gel permeation chromatography-multi-angle laser light scatting (GPC-MALLS). PAM-b-PMATC showed a broad emission peak about 388 nm excited at 318 nm in aqueous solution. The self-assembly behavior of PAM-b-PMATC in the binary mixture formamide/water was observed by transmission electron microscope (TEM). It indicated that PAM-b-PMATC-I and -II with the same PAM block self-assembled to vesicles and sunflower-like micelles. The water fraction in the mixture could control the size and thickness of vesicles. Vesicle size increased from 50 to 420 nm and vesicle thickness changed from 5 to 50 nm with water content ranging from 33 to 90 vol.%. In addition, the cytotoxicity in vitro of PAM-b-PMATC-I and its nanoparticles loaded with methotrexate (MTX) were evaluated by MTT assay.     

Synthesis of pH-responsive amphiphilic diblock copolymers containing polyisobutylene via oxyanion-initiated polymerization and their multiple self-assembly morphologies

 Two pH-responsive amphiphilic diblock copolymers, namely polyisobutylene-block-poly[2-(N,N-dimethylamino)ethyl methacrylate] (PIB-b-PDMAEMA) and polyisobutylene-block-poly(metharylic acid) (PIB-b-PMAA), were synthesized via oxyanion-initiated polymerization, and their multiple self-assembly behaviors have been studied. An exo-olefin-terminated highly reactive polyisobutylene (HRPIB) was first changed to hydroxyl-terminated PIB (PIB-OH) via hydroboration-oxidation of C＝C double bond in the chain end, and then reacted with KH to yield a potassium alcoholate of PIB (PIB-O^-K⁺). PIB-O^-K⁺ was immediately used as a macroinitiator to polymerize DMAEMA monomer, resulting in a cationic diblock copolymer PIB-b-PDMAEMA. With the similar synthesis procedure, the anionic diblock copolymer PIB-b-PMAA could be prepared via a combination of oxyanion-initiated polymerization of tert-butyl methacrylate (tBMA) and subsequent hydrolysis of tert-butyl ester groups in PtBMA block. The functional PIB and block copolymers have been fully characterized by ¹H-NMR, FT-IR spectroscopy, and gel permeation chromatography (GPC). These samples allowed us to systematically investigate the effects of block composition on the pH responsivity and various self-assembled morphologies of the copolymers in THF/water mixed solvent. Transmission electron microscopy (TEM) images revealed that these diblock copolymers containing small amount of original PIB without exo-olefin-terminated group are able to self-assemble into micelles, vesicles with different particle sizes and cylindrical aggregates, depending on various factors including block copolymer composition, solvent polarity and pH value.     

Fabrication of glucose biosensor for whole blood based on Au/hyperbranched polyester nanoparticles multilayers by antibiofouling and self-assembly technique

Acknowledging the benefits of hyperbranched polymers and their nanoparticles, herein we report the design and synthesis of sulfonic acid group functionalized hydroxyl-terminated hyperbranched polyester (H30-SO₃H) nanoparticles and their biomedical application. The H30-SO₃H nanoparticles were characterized by transmission electron microscopy (TEM), Fourier transform infrared (FTIR) spectroscopy and proton nuclear magnetic resonance spectroscopy (¹H NMR). The good hemocompatibility of H30-SO₃H nanoparticles was also investigated by coagulation tests, complement activation and platelet activation. The novel glucose biosensor was fabricated by immobilizing the positively charged Au nanoparticles, H30-SO₃H nanoparticles and glucose oxidase (GOx) onto the surface of glassy carbon electrode (GCE). It can be applied in whole blood directly, which was based on the good hemocompatibility and antibiofouling property of H30-SO₃H nanoparticles. The biosensor had good electrocatalytic activity toward glucose with a wide linear range (0.2–20 mM), a low detection limit 1.2 × 10⁻⁵ M in whole blood and good anti-interference property. The development of materials science will offer a novel platform for application to substance detection in whole blood.     

Supramolecular self-assembly and controllable drug release of thermosensitive hyperbranched multiarm copolymers

A novel temperature-responsive hyperbranched multiarm copolymer with a hydrophobic hyperbranched poly(3-ethyl-3-(hydroxymethyl)oxetane)(HBPO) core and thermosensitive poly(N-isopropylacrylamide)(PNIPAM) arms was synthesized via the atom transfer radical polymerization(ATRP) of NIPAM monomers from a hyperbranched HBPO macroinitiator.It was found that HBPO-star-PNIPAM self-assembled into multimolecular micelles(around 60 nm) in water at room temperature according to pyrene probe fluorescence spectrometry,1H N...     

Synthesis, characterization and self-assembly of ion-bonded amphiphilic A2B miktoarm star copolymers containing an azobenzene unit at the core

An azobenzene-containing supramolecular copolymers, consisted of two polystyrene (PSt) arms and one poly(ethylene oxide) (PEO) arm linked via ionic bond, has been designed and successfully synthesized. Monomethoxy PEO with phenylazobenzenesulfonic acid as the terminus (PEO-NN-SO₃H) was utilized to react with polystyrene carrying tertiary amino group at the middle of the polymer chain (PSt₂-N(CH₃)₂) to form ion-bonded supramolecular star copolymers (PSt₂-NN-PEO) with an azobenzene group at the core based on the interaction between sulfonic acid group and amino group. The obtained copolymers were characterized by ¹H nuclear magnetic resonance (¹H NMR) and gel permeation chromatography (GPC) techniques. The self-assembly behavior of the copolymers with different molecular weight of PSt was investigated, which shows solid spherical aggregates in water. The aggregation leads to the lower isomerization degree (54%) at the photostationary state in water compared with that in 1,4-dioxane (82%).     

Synthesis and properties of UV curable waterborne hyperbranched aliphatic polyester

The UV curable waterborne hyperbranched polyester (WBHP) consisting of a multi-hydroxy functional aliphatic polyester core, which is endcapped with methacrylic and salt-like groups in different ratios was synthesized. The core is second generation of hyperbranched aliphatic polyester Boltorn™ H20 with approximately 16 hydroxyl groups. The effects of different ratios of chemical structure of end groups were studied by evaluating various properties of WBHP such as solubility in water, dynamic viscosity, UV curing rate and final unsaturation conversion. A natural good control over the solubility of the samples was possible by salt-like functionality and raising the temperature. The investigation of solubility characteristics of the modified hyperbranched polyester illustrated that those with higher concentration of salt-like moiety were more soluble while those of having lower salt-like moiety were less soluble. The viscosity of the resin WBHP was reduced rapidly by dilution with water and raising temperature. Water showed a favorable viscosity reduction effect as compared to monomer and its blend with water. The polymerization rate of the resins under UV irradiation in the presence of a photoinitiator showed an increasing trend with higher concentration of methacrylate functionality.     

Studies on the self-assembly behavior of the amphiphilic block copolymer of PSt-b-PAA in apolar solvents with polar fluorescent probe

The block copolymer of polystyrene-b-poly(butyl acrylate) (PSt-b-PBA) with a well-defined structure was synthesized by atom transfer radical polymerization (ATRP); its structure was characterized, and the living polymerization was also validated by gel permeation chromatography, Fourier transform infrared, and ¹H NMR measurements. Then, the amphiphilic block copolymer of polystyrene-b-poly(acrylic acid) (PSt-b-PAA) has been prepared by hydrolysis of PSt-b-PBA, and copolymers of PSt-b-PAA with longer PSt blocks and shorter PAA blocks were obtained by controlling the conditions of ATRP polymerization. The reversed micelle solution of PSt-b-PAA in toluene was prepared by using the single-solvent dissolving method, and the reverse micellization behavior of PSt-b-PAA in toluene was mainly investigated in this paper. The fluorescent probe technique was used by using polar fluorescence compound N-(1-Naphthyl)ethylenediamine dihydrochloride (NEAH) as a polar fluorescent probe to study the reverse micellization behavior of PSt-b-PAA. It was found that the reverse micellization behaviors of PSt-b-PAA in toluene can be clearly revealed by using NEAH as a polar fluorescence probe, and the critical micelle concentrations (cmcs) can be well displayed. The experimental results showed that the self-assembling behavior of PSt-b-PAA in toluene depends apparently on the microstructure of the macromolecules and is also influenced by the temperature. For the copolymers of PSt-b-PAA with the same length of hydrophobic PSt blocks, the copolymer with a longer hydrophilic block PAA has lower cmc, and at higher temperature, the copolymer has lower cmc.     

侧基带有L-苯丙氨酸的手性两亲嵌段共聚物的合成及其自组装行为

N3-苯丙氨酸与嵌段共聚物聚乙二醇-b-聚炔丙基缩水甘油(MPEO-b-PGPE)发生click反应,合成了具有光学活性的两亲嵌段共聚物聚乙二醇-B-聚L-苯丙氨酸三唑基缩水甘油(MPEO-b-PGTP),用1H-NMR和元素分析对其结构和组成进行表征.并对其自组装行为进行研究,滴体积法测定MPEO-b-PGTP溶...     

A label-free and high sensitive aptamer biosensor based on hyperbranched polyester microspheres for thrombin detection

In this paper, we have synthesized hyperbranched polyester microspheres with carboxylic acid functional groups (HBPE-CA) and developed a label-free electrochemical aptamer biosensor using thrombin-binding aptamer (TBA) as receptor for the measurement of thrombin in whole blood. The indium tin oxide (ITO) electrode surface modified with HBPE-CA microspheres was grafted with TBA, which has excellent binding affinity and selectivity for thrombin. Binding of the thrombin at the modified ITO electrode surface greatly restrained access of electrons for a redox probe of [Fe(CN)₆]^3−/4−. Moreover, the aptamer biosensor could be used for detection of thrombin in whole blood, a wide detection range (10 fM–100 nM) and a detection limit on the order of 0.90 fM were demonstrated. Control experiments were also carried out by using bull serum albumin (BSA) and lysozyme in the absence of thrombin. The good stability and repeatability of this aptamer biosensor were also proved. We expect that this demonstration will lead to the development of highly sensitive label-free sensors based on aptamer with lower cost than current technology. The integration of the technologies, which include anticoagulant, sensor and nanoscience, will bring significant input to high-performance biosensors relevant to diagnostics and therapy of interest for human health.     

An amphiphilic supramolecular polymer: Construction,self-assembly and pH-responsive behavior in water

A novel amphiphilic supramolecular polymer (ASP) with rigid linear main chain has been constructed by the co-assembly of a rigid amphiphilic monomer and cucurbit[8]uril (CB[8]) in water, driven by CB[8]-based host-guest interactions. The ASP could further self-assemble into well-defined architectures including nanotubes and 2D films, depending on its concentration. Moreover, pH-responsive behavior of the ASP was also observed.     

Synthesis, characterization and mechanical properties of polyester-based aliphatic polyurethane elastomers containing hyperbranched polyester segments

Aliphatic polyester-based polyurethane (PU) elastomers with hyperbranched polyester segments were synthesized from polyester diol, hydroxyl-terminated hyperbranched polyester (HB-20), isophorone diisocyanate (PDI) and 1,4-butanediol. The crosslinking density of the PU elastomer was calculated by using Flory-Rehner equation. The degree of hydrogen bonding, the microstructure and the morphologies of these PU materials were characterized by means of FT-IR, WAXD and DSC, respectively. The experimental results showed that the PU elastomers containing small amount of HB-20 exhibited the enhanced hydrogen bonding and mechanical properties. As compared with the comparable PU specimen, the tensile strength of the polyester-based aliphatic PU containing 6 wt% HB-20 increased by 71.2 times, up to 36.1 MPa, and the elongation at break was still as high as 333.1%, resulting from the dual effects of the hydrogen bonding and the crosslinking density in the PU system.     

Synthesis and characterization of H-type amphiphilic liquid crystalline block copolymers by ATRP

H-type amphiphilic liquid crystalline block copolymers containing azobenzene were synthesized by atom transfer radical polymerization （ATRP）. Macroinitiators prepared by the esterification between poly（ethylene oxide） （PEG） and 2,2-dichloroacetyl chloride were utilized to initiate the polymerization of 6-[4-（4-ethoxyphenylazo）phenoxy]hexyl rnethacrylate （M6C）. The resulting macroinitiators and block copolymers were characterized by ^1H NMR, gel permeation chromatography （GPC）. Polarizing optical microscopy （POM） and differential scanning calorimetry （DSC） preliminarily revealed the liquid crystalline property of these block copolymers. This series of liquid crystalline block copolymers are promising in some areas, such as optical data storage, optical switch, and molecular devices.     

The effect of polymer architecture on the nano self-assemblies based on novel comb-shaped amphiphilic poly(allylamine)

Twelve novel poly(allylamine) (PAA)-based, comb-shaped amphiphilic polymers have been developed. Hydrophobic groups of cetyl, palmitoyl and cholesteryl were randomly grafted to PAA and quaternisation was carried out on some modified polymers. Polymers were characterised using ¹H NMR, elemental analysis and differential scanning calorimetry. All polymers formed nano self-assemblies in the aqueous solution with a positive zeta potential and were able to encapsulate a hydrophobic agent, methyl orange, in the core. The critical aggregation concentration (CAC) and the microviscosity were found to be dependent on the polymer hydrophobicity. Being the most hydrophobic polymer, cholesteryl-grafted PAA had the lowest CAC (0.02 mg mL⁻¹) and the highest microviscosity. They appeared to form dense nanoparticles and were transformed into novel nanostructures in the presence of free cholesterol. Palmitoyl-grafted polymers formed nanoparticles while cetyl-grafted polymers formed polymeric micelles. The flexibility of cetyl chains possibly resulted in the formation of multicore polymeric micelles.     

聚环氧乙烷-g-聚己内酯两亲性接枝共聚物的合成及药物释放行为

通过环氧丙醇(GL)与环氧乙烷(EO)的阴离子顺序开环聚合制备了水溶性嵌段共聚物PEO-b-PGL, 以PGL嵌段每个重复单元的侧羟基为引发点进一步引发ε-己内酯(CL)的开环聚合, 合成了结构规整的以聚环氧乙烷(PEO)为主链的两亲性接枝共聚物(PEO-b-PGL-g-PCL). 研究了PEO-b-PGL-g-PCL在水相中的自组装行为, 采用稳态荧光探针法测定了胶束的临界胶束浓度(cmc). 以疏水性药物阿霉素(DOX)为模型药物, 研究了两亲性接枝共聚物的化学组成对药物的扩散释放以及降解释放行为的影响.     

Synthesis and properties of amphiphilic vinyl acetate triblock copolymers prepared by copper mediated living radical polymerisation

Polymerisation of vinyl acetate by conventional free radical polymerisation using a diazo initiator followed by copper mediated living radical polymerisation with a range of monomers was studied. This method led to the synthesis of triblock copolymers. We have thus successfully prepared several new ABA triblock copolymers where B is poly(vinyl acetate) and A is (dimethylamino)ethyl methacrylate (DMAEMA), (polyethylene glycol) methyl ether methacrylate (MeO(PEG)MA) or solketal methacrylate (SMA). The sequential conventional/living radical polymerisation approach provided an efficient route to synthesis of new block copolymers. The properties of these amphiphilic polymers have been subsequently investigated by ¹H NMR, fluorescence spectroscopy, tensiometry and dynamic light scattering to investigate their behaviour as potential surfactants.     

Structural effects of amphiphilic block copolymers on the gold nanoplates synthesis. Experimental and theoretical study

Geometric and multi-arms gold nanoplates were synthesized by direct reaction between two different amphiphilic block copolymers and KAuCl₄ in aqueous solution. Amphiphilic copolymers containing blocks of ε-caprolactone and N-vinyl-2-pyrrolidone were used. The block copolymer structures and concentration play a key role on the morphology and size of gold nanoparticles. Copolymers have a dual function as reductant and stabilizer agent. The gold nanoparticles obtained were characterized by transmission electron microscopy (TEM), UV–visible spectroscopy (UV–vis) and dynamic light scattering (DLS). On the other hand, electronic structure calculations, based on density functional theory were performed to support the experimental results. The simple models built with small clusters of gold and co-monomer units provide planar structures complexes with higher stabilization energies. These results agree with the nanoplates obtained experimentally. Moreover, the reactivity analysis based on monoelectronic properties suggests that the formation of aggregates between complexes is favored.     

Synthesis,self-assembly and photo-responsive behavior of AB2 shaped amphiphilic azo block copolymer

In this work, we report the synthesis of AB2 shaped amphiphilic azo block copolymer by macromolecular azo coupling reaction. The product and intermediates were characterized by various methods. The selfassembly in selected solvents and photo-responsive behavior of the copolymer were studied by means of UV–vis spectrophotometry and TEM. Spherical aggregates can be obtained by gradually adding water into the solution of this amphiphilic azo block copolymer. Upon irradiation with polarized UV(365 nm)light, the aggregates can be elongated in the polarized direction.     

Study of amphiphilic poly(1-dodecene-co-para-methylstyrene)-graft-poly(ethylene glycol). Part II: Preparation and micellization behavior of the amphiphilic copolymers

Poly(1-dodecene-co-pMS) copolymers were brominated by HBr/H₂O₂ system with high selectivity at the methyl groups of pMS units. It was found that longer reaction time, higher pMS content, and lower molecular weight of the copolymers were helpful for higher degree of bromination. Through a modified Williamson ether synthesis, poly(ethylene glycol) monomethyl ethers (PEG) were grafted onto the brominated copolymers, and the amphiphilic poly(1-dodecene-co-pMS)-graft-PEG copolymers which can be readily dissolved in n-octane were successfully synthesized. Due to their amphiphilic characteristics, they can self-assemble spontaneously into reverse micelles in n-octane. Their micellization behaviors were investigated by fluorescence probe technique, transmission electron microscopy (TEM), and dynamic light scattering (DLS). The critical micelle concentrations of the three copolymers in n-octane were determined at about 1.26 × 10⁻⁴, 1.58 × 10⁻⁴, and 1.95 × 10⁻⁴ g ml⁻¹ by fluorescence measurements. The morphologies of micelles were preliminarily explored by TEM and were found to be spheres.     

Carbohydrate‐based amphiphilic diblock copolymers: Synthesis,characterization, and aqueous properties

Amphiphilic poly(ε‐caprolactone)‐b‐poly[(methacrylate‐graft‐poly(ethylene oxide))‐co‐6‐O‐methacryloyl‐D ‐galactopyranose] (PCL‐b‐P(MAPEO‐co‐GaMa)) with various compositions and molecular weights were synthesized via a controlled four‐step strategy. The first step involves the synthesis of functionalized poly(ε‐caprolactone) macroinitiator by ring‐opening polymerization (ROP) of ε‐caprolactone (CL) as initiated by aluminum triisopropoxide (Al(OⁱPr)₃). After selective bromination of the hydroxyl end‐group of the resulting α‐isopropoxy, ω‐hydroxy poly(ε‐caprolactone) by using 2‐bromoisobutyryl bromide, the controlled radical copolymerization of α‐methoxy, ω‐methacrylate poly(ethylene oxide) (MAPEO) with 6‐O‐methacryloyl‐1,2;3,4‐di‐O‐isopropylidene‐D ‐galactopyranose (DIGaMa) was performed by atom transfer radical polymerization (ATRP) in THF at 60 °C using CuBr ligated with 1,1,4,7,10,10 hexamethyltriethylenetetramine (HMTETA) as catalytic complex. In the final step, isopropylidene protective functions were selectively removed using an aqueous formic acid solution leading to the expected amphiphilic graft copolymers. The molecular characterization of those copolymers was performed by ¹H NMR spectroscopy and gel permeation chromatography (GPC) analysis. The self‐assembly of the copolymers into micellar aggregates as well as the related critical micellization concentration (CMC) in aqueous media were determined by dynamic light scattering (DLS) and fluorescence spectroscopy, respectively. In parallel, the morphology of the solid deposits of micellar aggregates was examined with atomic force microscopy (AFM). © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3662–3672, 2008     

Infrared spectroscopic studies on crystalline phase transition of PVDF and PVDF/hyperbranched polyester blend ultrathin films

In this study, as cast (AC, at 30 °C) and annealed (AN, at 130 °C, 3 h) samples of polyvinylidene fluoride (PVDF) and PVDF/hyperbranched polyester (HBP) (90/10) blend ultrathin films were subjected to heating-cooling (30 → 210 → 30 °C) cycle, and studied for their changes in crystalline phase transition behavior using in-situ Fourier transform infrared-transmission spectroscopy (FTIR-TS) and grazing incident reflection absorption spectroscopy (FTIR-GIRAS) techniques. Factor analysis was employed to extract the pure crystalline and amorphous spectra as well as the percentage content of ferroelectric crystallinity for both the samples. Irrespective of the thermal treatment (AC or AN) and spectral measurement (FTIR-TS or GIRAS) techniques, neat PVDF sample exhibited irreversible phase transitions during heating-cooling cycle associated with the transformation from ordered β-crystalline (1276 cm⁻¹) into disordered amorphous (1234 cm⁻¹) form. Interestingly, annealed PVDF/HBP blend sample measured using FTIR-GIRAS exhibited reversible crystalline phase transition behavior similar to a ‘dipole memory effect’ even after heating to 210 °C (>T_m) and then cooled to 30 °C. Compared to neat PVDF, higher ferroelectric crystallinity and reversible phase transition in PVDF/HBP blend may be attributed to (i) the existence of H-bonding between HBP (CO and OH groups) and PVDF (CH₂ and CF₂) and/or (ii) HBP acting as a nanoparticle in PVDF matrix.