Investigations of a series of nonionic surfactants of sugar-lipid hybrids by light scattering and electron microscopy

Sugar-lipid hybrids of the type C_nC_m were prepared by coupling an alkane chain (C_n) with a maltooligosaccharide (G_m) over an amide linkage. Coupling was performed with maltobionolactone (G₂) and n-alkylamine chains C_n withn=8,10,12,14,16, i.e. variation of the hydrophobic part of the molecule, and with hexadecylamine (C₁₆) and different maltooligosaccharides (G_m, m=2,3,4,6). The solution properties of the various products were studied by means of static and dynamic light scattering (LS) and by electron-microscopy (EM).The results may be summarized as follows: If the alkane chain is shorter thann=14, small spherical micelles with a radius of about 3 nm are observed. In time these micelles aggregate further to form increasingly larger spherical clusters which eventually precipitate. Long rod-like micelles form whenn 14. Contour length and chain stiffness were determined by applying theories of semiflexible chains. A qualitative confirmation of the light scattering results, i.e., micelle size and shape, was obtained from electron microscopy.     

Ringing gels: Their structure and macroscopic properties

The phase diagram of the ternary surfactant system which consists of dimethyltetradecylaminoxide, hydrocarbon, and water contains a highly elastic gel phase which borders on the micellarL ₁-phase. This gel phase is transparent, optically isotropic, and shows the ringing phenomena when it is excited to mechanical vibrations. From SANS and light-scattering measurements it is shown that this phase consists of the same spherical microemulsion droplets which are present in the adjacent micellar solution. Even in the micellar solution the droplets are fairly monodisperse and in the SANS scattering functions a second scattering maximum was observed. Both the light scattering and SANS data can be described quantitatively on the basis of hard sphere interactions between the particles. Furthermore, it is shown that elasticity and shear modulus of the gel phase, which were determined experimentally, correlate with the compressibility modulus as calculated from the scattering data. The elasticity modulus and hence the osmotic compressibility modulus are related to the Laplace pressure inside the globules. For the calculation of this pressure it is possible to take the interfacial tension, which is obtained from a dilute micellar solution against the hydrocarbon which is used for the system. The radius of the particles and the hydrocarbon content in the system can be increased when some of the dimethyltetradecylaminoxide is replaced by dimethyltetradecylphosphinoxide.     

The flexibility of rodlike micelles in aqueous solutions and the crossover concentrations among dilute,semidilute, and concentrated regimes

A flexibility parameter, the persistence length, has been evaluated from the radii of gyration and the contour lengths for rodlike micelles of heptaoxyethylene alkyl ethers (C _n E₇,n=12, 14, 16) and tetradecyldimethylammonium chloride (C₁₄DAC) and bromide (C₁₄DAB) at the observed crossover concentrations between dilute and semidilute regimes. The persistence length range is 43–73 nm, except for C₁₂E₇, for which it is 32 nm. The crossover concentrations between dilute and semidilute regimes for the semiflexible rodlike micelles calculated according to Ying and Chu as a function of the molecular weight, the contour length, and the persistence length are consistent with the observed values. The crossover concentration between semidilute and concentrated regimes was, on the other hand, calculated by using the same micelle parameters, including the value of thickness of cross-section of the rodlike micelles. The obtained values are at variance with the observed values. This means that rodlike micelles in semidilute and concentrated solutions might differ in size and/or flexibility from those in dilute solution.     

Characteristics of rodlike micelles of cetyltrimethylammonium chloride in aqueous NaCl solutions: Their flexibility and the scaling laws in dilute and semidilute regimes

Static light scattering has been measured for aqueous NaCl solutions of cetyltrimethylammonium chloride (CTAC) at 25 °C. While spherical micelles are formed above the critical micelle concentration for 0–1.5 M NaCl solutions, rodlike micelles are formed at NaCl concentrations higher than 1.18 M.The aggregation number of rodlike micelles increases markedly with increasing NaCl concentration, and it is as large as 11400 in 4.0 M NaCl. Long rodlike micelles are semiflexible and behave like wormlike chains. Their contour length and persistence length have been calculated as 630 and 46.4 nm, respectively, in 4.0 M NaCl.Rodlike micelles overlap and entangle together to form a network in semidilute solutions above a threshold micelle concentration. The radius of gyration of the blob can be scaled for its molecular weight with the exponent, 0.55, coinciding with that for isolated rodlike micelles in dilute solutions. The scaling laws for the reciprocal envelope of light scattered in the semidilute regime and for the molecular weight and the radius of gyration of the blob are also discussed with reference to the micelle concentration.     

An investigation of aging aqueous poly(vinyl alcohol) solutions by the light scattering method

Aqueous poly(vinyl alcohol) solutions of various concentrations were investigated. The aged solutions were diluted and then analyzed by the light scattering method, size exclusion chromatography, and viscometry. It was found that a relatively small quantity of supermolecular formations arise during aging; they are dispersed in the molecular solution of the predominant part of the polymeric material present. The amount of these aggregated structures and their formation rate increase with concentration of the aging solution.     

Rigid-rod polymers with flexible side chains

Modeling studies were performed for a rigid-rod polyester with hexadecyloxy side chains (n=16) in order to simulate x-ray scattering curves in the medium angle scattering region (s=4 sin / from 0.2 Å^–1 to 2.2 Å^=t–1). The experimental ones were taken from a material obtained by cooling to room temeperature from the smectic mesophase at 150°C. The wide-angle x-ray diffractograms were calculated for given conformations and molecular arrangements using Debye's equation. The theoretical result thus obtained for a great variety of possible packing models and structures was compared to the experimental result. The size of the effective scattering region is found to be 61×18×52=6×10⁴ ų and consists of approximately five layers, each of which is composed of two rigid rods and 20 side chains. The planes form by the rigid rods, together with the side chains, have a distance of 3.6 Å, the distance between the rods being 26 Å. As the main result, it was found that the side chains form regions with a denser ordering (clustering). The interchain distance for side chains decreases in the regions from 5.3 Å to 4.8 Å.     

Investigations of the influence on the phase morphology of PP-EPDM-blends on their mechanical properties

This work covers the dependence of the mechanical properties of polymer blends on their composition and their phase morphology. Blends of EPDM-elastomers and polypropylene were prepared covering the whole concentration range. The phase morphology was varied strongly by employing different mixing techniques and its morphology was characterized by means of electron microscopy and light microscopy, as well as by x-ray scattering and calorimetry.Mechanical properties such as the complex shear modulus, the tensile modulus as well as the stress strain behavior were investigated as a function of the composition of the blends and their phase morphology. The experimental finding is that the complex modulus, the tensile modulus, the yield stress, and the ultimate stress are rather insensitive with respect to the phase morphology and vary continuosly with the composition. The elongation at break, on the other hand, as well as the impact strength were found to depend on the phase morphology and to vary discontinously with the composition. One conclusion to be drawn is that one is not always forced to control the phase morphology tightly during processing in order to obtain materials with sufficiently good mechanical properties. Rather, simple theoretical approaches, neglecting details of the phase morphology are frequently able to satisfactorily predict mechanical properties of multiphase blends.     

An evaluation method for SAXS-patterns of fibrillar two-phase systems containing oriented particles of moderate anisotropy and short range correlation

Starting from the theoretical background of Rulands interface distributions, an evaluation method for small angle x-ray patterns arising from oriented fibrillar two-phase structures is proposed. If the fibril contains highly oriented particles with only moderate anisotropy and if the correlations between those particles within the fibril are of short range only, every axial section of the scattering pattern shows a one dimensional Porod law. A procedure of successive model confinement using the well known tools of nonlinear regression analysis is described. The result of such an analysis for the scattering pattern of an oil diluted SBS block copolymer recorded with synchrotron radiation under first-cycle stretching is reported. At=4 nm four contributions to the scattering pattern could be identified: a) fibrils containing well-defined cylinders standing upright; b) fibrils containing lying cylinders under destruction; c) stretched-out polybutadiene chains, connecting two polystyrene cylinders and causing the observable layer line pattern; and d) stretched-out polybutadiene chains looping through the neighboring PS domain and returning to their starting domain. In addition, a simple method for determining the height-to-diameter ratio of cylinders from the form factor envelope is proposed.     

The association of urethane-polyethyleneoxide (HEUR) thickeners,as studied by NMR self-diffusion measurements

The concentration and molecular weight dependence of the self-diffusion coefficient (D _self) of associative polymers of HEUR-type in aqueous solution have been investigated using FT-PGSE-NMR technique. The idea of three-dimensional network formation as a result of aggregation of the hydrophobic end-groups of the polymer in junctions is supported through the observed dramatic lowering ofD _self with increased concentration. The network-formation efficiency depends on the polymer molecular weight as well as the hydrophobicity of the end-groups.A double logarithmic dependence of the self-diffusion coefficient versus concentration (c) has been observed:D _selfc ^–a1,a2 . The first exponent,a ₁, is valid at low concentration, <1% polymer per weight solution, and ranges from 0.5 to 1, whereas the second exponent,a ₂, describing systems of higher concentration, ranges from 2 to 2.7.     

Association of poly-(L-lysine) homologues in sodium carbonate solution

The molecular weights of isopoly(L-Iysine), poly(L-ornithine), and poly(L-, -diaminobutylic acid), the homologues of poly (L-lysine), were determined by the sedimentation equilibrium method in aqueous solutions of 1.0 M NaCl or 0.1 M Na₂CO₃. In every sample the molecular weights in the presence of carbonate ions was twice that in NaCl solution. In a previous paper we reported that poly(L-lysine) behaved as a dimer at concentrations higher than 0.4 g/dl in the presence of carbonate ions and as a monomer in dilute solution, and these two forms were related by a monomer-dimer equilibrium. The homologues did not have a monomer-dimer equilibrium relationship under the conditions of the measurements that we carried out. The CD spectrum of isopoly(L-lysine) in water showed a uniform increase with a decrease in the wave length in the presence of carbonate ions. However, in the alkaline region in NaOH solution, the spectrum changed and a small minimum at 212 nm was found. When additional carbonate ions were added a large minimum at 205 nm was observed. This result can be explained by a change in the conformation from a random coil to a regular structure. We could not compare isopoly(L-lysine) with other polypeptides, because it does not have peptide bonds. The CD spectra of poly(L-ornithine) and poly(L-, -diaminobutylic acid) in NaOH or Na₂CO₃ solutions showed only slightly regular structures. It was also confirmed that the dimer-structures of the poly (L-lysine) homologues do not have regular structures.This paper was presented at the VI. Symposium on Analytical Ultracentrifugation, Marburg, FRG, February 16–17,1989.     

Mixed micelles of tetradecyltrimethylammonium bromide and chlorhexidine digluconate in aqueous solutions of isopropyl alcohol

The influence of isopropyl alcohol (IPA) on the size and composition of the mixed micelles in mixtures of tetradecyltrimethylammonium bromide (TTAB) and chlorhexidine digluconate (CG) has been determined as a function of the composition of the systems. The addition of 0.5 M and 1.0 M IPA had little significant effect on the composition of the mixed micelles as determined both by analysis of critical micelle concentration (CMC) data using a theoretical treatment based on excess thermodynamic quantities and by an empirical treatment of conductivity data. Static and quasielastic light scattering measurements showed a progressive decrease of the aggregation number and hydrodynamic radius of TTAB micelles on addition of IPA, but minimal changes in the properties of the small CG aggregates. The results show that the micellar weight in the TTAB/CG/IPA solutions is determined by the ratio of the surfactants in the system and for each TTAB/CG ratio decreases on addition of IPA.     

Viscoelastic properties of polyacrylonitrile particles stabilised by a poly-2-vinylpyridine/polytert butylstyrene block copolymer

The viscoelastic properties of a dispersion of polyacrylonitrile particles stabilised by a block copolymer poly-2-vinylpyridine/polytert butylstyrene dispersed in solvesso have been measured as a function of particle concentration and frequency at ambient temperatures. At low volume fraction of particles it was found that the loss modulus of the dispersions was larger than the storage modulus, whilst at volume fractions > 0.40 the storage modulus dominates the rheology. This is attributable to there being a steric repulsion between the particles as a result of an increasing concentration of particles and the resultant reduction in interparticle separation in the dispersion. In addition the observed exponential increase of the storage modulus with increasing particle volume fraction mirrors the exponential increase in force with decreasing surface separation of the same type of polymers adsorbed to mica.     

Lamellar phases in mixtures of low molecular weight alkanols and cetyltrimethylammonium bromide (CTAB)

Partial phase diagrams showing the domains of existence of a transparent, viscous, lamellar-structured (D)-phase that transforms reversibly into fluid single phase solutions at high temperature are presented for the system: cetyltrimethylammonium bromide (CTAB), two low molecular weight alcohols, and water with and without additives. At constant temperature and with a fixed amount of surfactant, the size and location of this phase in the phase diagram depends upon three composition variables: i) the ratio of concentrations of medium chain alcohol to long chain alcohol (R), ii) the ratio of concentrations of medium chain alcohol to surfactant (R), and iii) the concentrations of small amounts (up to 10 % by weight) of additives such as ethylene glycol, propylene glycol, and dimethylformamide, as well as NaBr. Small-angle x-ray scattering measurements of these mixtures reveal a lamellar structure. The observed lamellar repeat distances range from 60 A to 290 Å and depend upon the ratiosR andR and the concentration of the additives. The mechanical and structural properties of theseD-phases can be tuned by adjustingR andR. TheD-phase-to-isotropic transition temperature can be varied from near room temperature to above 80 °C by adjustingR andR.     

Measurement of interaction forces between crossed quartz glass rods in presence of adsorbed macromolecules

The interaction energy-distance curves of fractionated and unfractionated homo- and copolymers were measured. The results were compared quantitatively with the HVO theory. It was found that only a small number of segments per tail are necessary to obtain stability. The experimental energy-distance curves for low molecular weights are described sufficiently well by the HVO theory, with exponentional distribution of tail sizes. For high molecular weights the exponential distribution cannot be considered as a reasonable assumption because the number of segments in the tails is very low.Polydisperse samples of PVA with different contents of acetate groups, and similar molecular weight, indicate an increasing extension of the adsorbed polymer layer with decreasing acetate content.     

The rheological properties of concentrated cetyltrimethylammonium bromide-salicylic acid solutions in water

Data on the rheological properties of the hexadecyl-trimethylammonium salicylate system (CTAB-SA) in water are reported. Three concentrations were used (0.1, 0.01, and 0.001 M). For the highest concentration, the effect of temperature on the rheology was studied in detail.The rheology of the 0.1 M CTAB-SA solution indicates a very uniform micellar size. By contrast with concentrated polymethyl methycrylate dispersions studied by the author, there was a strong divergence between the viscosity-shear rate and viscosity-frequency data, although the plateau low shear rate and frequency values agreed over a wide range of temperature. This effect could be explained by a shear rate dependent diffusion constant. The large temperature variation of the plateau viscosity and elasticity modulus values could be explained by a combination of micellar number concentration and flexibility changes as the temperature varies.At lower concentrations, the rheological data shows evidence of polydispersity in micellar size. Strong shear thickening and extensional viscosity effects are also evident, probably due to micellar overlap and cluster formation in strong shear fields and the alignment of the very long micelles in elongational flow. The shear thickening effects take some 200 s to relax (0.01 M solution). Recovery of the elasticity after shearing the 0.1 M solution is rapid (a few hundred milliseconds).     

SAXS study of core-shell colloids

Polymeric core-shell systems were produced by a two-stage emulsion polymerization technique under fixed conditions: i) monodisperse seed latex with a sufficiently high particle number; ii) starved monomer-II addition; iii) water-soluble initiator; iv) incompatibility of core and shell polymer. From electron micrographs, it is not possible to determine where the second polymer is located within these two-stage emulsion polymers. The internal structure of the particles can be detected by small-angle x-ray scattering. The results indicate that; i) the emulsion polymerization process takes place in a small surface layer region of the seed particles, and ii) a small interfacial layer exists between the core and shell polymer.Part 6 of Polymerizations in the Presence of Seeds     

The use of dilute solution viscometry to characterize the network properties of carbopol microgels

We used dilute solution viscometry, specifically, measurements of intrinsic viscosity and overlap concentration to characterize two members of the carbopol family, carbopols 940 and 941. These measured quantities were then used to calculate the swollen-to-dry volume ratios for both resins over a range of ionic strengths. The variation in this ratio is representative of the swelling equilibria of the micronetwork and is modeled using standard network theory with modifications for non-Gaussian chain statistics and for fixed charges on the chains. By fitting to experimental data, the cross-link density is determined as 1450 monomer units between cross-link sites for carbopol 940 and 3300 units for carbopol 941. The shear modulus of the microgel domain is then predicted from the swelling data and found to be an order of magnitude greater than the elastic modulus measured on concentrated carbopol dispersions. We argue that this discrepancy is due to a large number of defects which reduce the cycle rank of the network. Current microgel technology specifies that their rheological behavior can be predicted once the domain cross-link density is known. Simple dilute solution viscometry appears capable of providing this prerequisite.     

A small-angle neutron scattering study on polydisperse silica spheres coated with polyisobutene

Neutron-scattering studies at small angles are performed on dilute dispersions of small, polydisperse silica spheres coated with polyisobutene in mixtures of h₁₂ and d₁₂-cyclohexane. The contrast variation method is applied to reveal the internal structure of the compound particles. For a detailed interpretation of the scattering curves, it is assumed that the particles consist of spherical silica cores with concentric PIB-layers into which solvent molecules can penetrate. Also the polydispersity of the particle cores is taken into account. Model calculations fit the experimental curves fairly well except for the curves near the matching point, and at higher wavevectors, where experimental errors are relatively large due to the smallness of the scattering of the particles compared to that of the background.     

Functionalization of colloidal silica and silica surfaces via silylation reactions

A series of trialkoxysilane compounds tipped with primary amine groups were used to functionalize the surfaces of glass and colloidal silica. Streaming potential and microelectrophoretic mobility measurements were used to monitor the stability of the functionalized surfaces.Hydrolytic breakdown of the surface-to-silane coupling was induced by either successively increasing and decreasing the pH of the solution in contact with the surface, or by aging the derivatised surfaces in aqueous solution over prolonged periods of time. The chemistry of the spacer units between the trialkoxysilane group and the primary amine tip had a major influence on the subsequent hydrolytic stability. Large hydrophobic spacer groups showed small changes in the electrokinetic properties on storage, but large changes when successively titrated with acid and base through the pH range. The behavior observed with small hydrophobic spacer groups was that large changes in electrokinetic properties were obtained on storage and with pH titration.     

Structure of casein micelles I. Small angle neutron scattering and light scattering fromβ- andχ-casein

Casein is the main protein component of milk and is of remarkable colloidal stability. Under the influence of milk clotting enzymes casein shows the striking behaviour of coagulation. This clotting process has already been studied by other groups, neglecting the fact that casein is not a homogeneous protein. The purpose of the present study is focused, in this first stage, on the determination of the structure of the various casein components. In cooperation with other laboratories we have been able to obtain the well separated individual proteins. Studies have been performed so far with- and-casein. For detailed structural information we carried out small angle neutron scattering and combined static and dynamic light scattering measurements and determined the molecular weight,M _w, the radius of gyration, S ² the hydrodynamic radius,R _H, the-value and the particle scattering factor, P_z(q). The two caseins show a strikingly different behaviour. For the-casein we found a star-like structure, i. e. an aggregation pattern that is expected for a common micelle. The micelle consists of about 38 monomer chains. The aggregates of-casein appear to be composed of star-like submicelles, where each submicelle contains nine-casein chains and the total degree of aggregation is about 140.