Side‐chain ferrocene‐containing (meth)acrylate polymers: Synthesis and properties

A comprehensive investigation on the synthesis and properties of a series of ferrocene‐containing (meth)acrylate monomers and their polymers that differ in the linkers between the ferrocene unit and the backbone was carried out. The side‐chain ferrocene‐containing polymers were prepared via atom transfer radical polymerization. The kinetic studies indicated that polymerization of most monomers followed a “controlled”/living manner. The polymerization rates were affected by the vinyl monomer structures and decreased with an increase of the linker length. Methacrylate polymerization was much faster than acrylate polymerization. The optical absorption of monomers and polymers was affected by the linkers. Thermal properties of these polymers can be tuned by controlling the length of the linker between the ferrocene unit and the backbone. By increasing the length of the linker, the glass transition temperature ranged from over 100 to ?20 °C. Electrochemical properties of both monomers and polymers were characterized. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis of pentafluorophenyl(meth)acrylate polymers: New precursor polymers for the synthesis of multifunctional materials

Pentafluorophenyl acrylate and -methacrylate were polymerized using AIBN as a thermal initiator. The obtained polymers were soluble polymeric active esters that could be used for the preparation of multifunctional polymers. The reactivity of poly(pentafluorophenylacrylate) and poly(pentafluorophenylmethacrylate) towards primary and secondary amines, as well as alcohols was investigated in a quantitative way. Both poly(active esters) reacted satisfactorily with aliphatic primary and secondary amines but only low conversion was found in the case of aromatic amines. Conversions of only 30% were reached when poly(pentafluorophenylacrylate) was treated with one equivalent of alcohol under base catalysis. In time resolved FT-IR studies the rate constants of the polymer analogous reactions were determined.     

On the synthesis of pure (meth) acrylate esters and their corresponding homopolymers

We have observed that homopolymers of certain (meth)acrylate esters, prepared by the Schotten–Baumann method of (meth)acryloyl chloride and desired alcohol, in the presence of triethylamine or pyridine, formed gels. The mechanism of gelation was investigated and found to be due to a diene impurity, (meth)acrylic anhydride, which cannot be easily separated from many (meth)acrylate esters. For preparation of pure (meth)acrylate esters, the S_N2 displacement reaction of (meth)acrylate anion with the desired chloro compound is recommended. The yields of the two reactions are comparable, and even t-butoxycarbonylmethyl methacrylate is produced in 73% yield by the recommended method.     

Tailored synthesis of structurally defined polymers by organotellurium-mediated living radical polymerization (TERP): synthesis of poly(meth)acrylate derivatives and their di- and triblock copolymers

The organotellurium-mediated living radical polymerization (TERP) method allows the synthesis of various polyacrylate and polymethacrylate derivatives with precise control of molecular weight and with defined end groups. The method can be applied to the synthesis of AB-diblock and ABA- and ABC-triblock copolymers composed of different families of monomers.     

The mutual diffusion coefficient for (meth)acrylate monomers as determined with a nuclear microprobe

The value of the mutual diffusion coefficient DV of two acrylic monomers is determined with nuclear microprobe measurements on a set of polymer films. These films have been prepared by allowing the monomers to diffuse into each other for a certain time and subsequently applying fast ultraviolet photo-polymerization, which freezes the concentration profile. The monomer diffusion profiles are studied with a scanning 2.1 MeV proton microprobe. Each monomer contains a marker element, e.g., Cl and Si, which are easily detected with proton induced x-ray emission. From the diffusion profiles, it is possible to determine the mutual diffusion coefficient. The mutual diffusion coefficient is dependent of concentration, which is concluded from the asymmetry in the Cl- and Si-profiles. A linear dependence of the mutual diffusion coefficient on the composition is used as a first order approximation. The best fits are obtained for a value of b=(0.38+/-0.15), which is the ratio of the diffusion coefficient of 1,3-bis(3-methacryloxypropyl)-1, 1,3,3-tetramethyldisiloxane in pure 2-chloroethyl acrylate and the diffusion coefficient of 2-chloroethyl acrylate in pure 1,3-bis(3-methacryloxypropyl)-1,1,3,3-tetramethyldisiloxane. Under the assumption of a linear dependence of the mutual diffusion coefficient DV on monomer composition, it follows that DV = (2.9+/-0.6)10(-10) m(2)/s at a 1:1 monomer ratio. With Flory-Huggins expressions for the monomer chemical potentials, one can derive approximate values for the individual monomer diffusion coefficients.     

Synthesis of novel poly(meth)acrylates containing tetracyanocyclopropyl groups as piezoelectric chromophores and their properties

p‐(2,2,3,3‐Tetracyanocyclopropyl)phenoxyethyl acrylate ( 5a ) and p‐(2,2,3‐tetracyanocyclopropyl)phenoxyethyl methacrylate ( 5b ) were prepared by the reactions of bromomalononitrile with p‐(2‐acryloyloxyethoxy)benzylidenemalononitrile and p‐(2‐methacryloyloxyethoxy)benzylidenemalononitrile, respectively. Monomers 5a and 5b were polymerized with free‐radical initiators to obtain polymers with multicyanocyclopropane functionalities in the pendant group. The resulting polymers were soluble in acetone, and the inherent viscosities were 0.25–0.30 dL/g. Solution‐cast films showed thermal stability up to 300 °C with glass‐transition temperatures of 140–156 °C. The dipole moments of 5a and 5b , calculated by the atom superposition and electron delocalization molecular orbital method, were 7.58–7.30 D. Piezoelectric coefficients (d₃₁) of the poled polymer films were 1.8–1.9 pC/N, acceptable values for piezoelectric device applications. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 379–384, 2002     

Two-dimensional chromatography of complex polymers 6. Method development for (meth)acrylate-based copolymers

The free-radical copolymerisation of various acrylates and methacrylates resulting in complex copolymers for cosmetic applications were investigated using different chromatographic techniques including HPLC and on-line coupled two-dimensional (2D) liquid chromatography. The complete separation of all polymerisation products was achieved by gradient HPLC. A computated optimisation procedure, using the Polymer Chromatographic Model allowed us to design a step mobile phase gradient to improve resolution of homopolymer chromatographic separation. By combining gradient HPLC and SEC (Size Exclusion Chromatography) in a fully automated two-dimensional chromatography setup, the complex distributions of chemical composition and molar mass could be simultaneously described and fingerprinted.     

Control of various morphological changes of poly(meth)acrylate microspheres and their swelling degrees by SPG emulsification

Crosslinked poly(meth)acrylate polymers with a variety of morphologies were synthesized with two steps. In the first step, a microporous glass membrane (Shirasu Porous Glass, SPG) was employed to prepare uniform emulsion droplets by applying an adequate pressure to the monomer phase, which was composed of the ADVN initiator, solvent of toluene or heptane or their mixture, and a mixture of (meth)acrylate monomers. The droplets were formed continuously through the membrane and suspended in the aqueous solution, which contained a PVA‐127 suspending agent, SLS emulsifier, and NaNO₂ inhibitor to suppress the nucleation of secondary particles. SPG pore sizes of 0.90, 5.25, and 9.25 μm were used. Then the emulsion droplets were polymerized at 343 K with a rotation rate 160 rpm for 24 h. The (meth)acrylate monomers 2‐ethylhexyl acrylate (2‐EHA), 2‐ethylhexyl methacrylate (2‐EHMA), cyclohexyl acrylate (CHA), methyl methacrylate (MMA), lauryl acrylate (LA), and lauryl methacrylate (LMA) were used in this research. The influences of the ratios of the monomer and crosslinking agent EGDMA, the amount of diluents, the monomer type on the polymer particle morphology, the swelling degree, and the polymer particle size were investigated. It was found that an increase in the concentrations of EGDMA and heptane resulted in higher coarse porous spheres and smaller polymer particle sizes. A coefficient with a variation close to 10%, or a standard deviation of about 4, was obtained. The capacity of these spheres as solvent absorption materials was examined. The highest swelling degrees of heptane and toluene were obtained when LA was employed as the monomer with 30% (by weight) of EGDMA and 70% (by weight) of heptane as an inert solvent. The highest capacity of the solvent absorption was obtained when using a polymer particle size of 4.81 μm, as prepared by SPG pore size 0.9 μm. The polymer particles were able to absorb aliphatic hydrocarbon solvents, aromatic hydrocarbon solvents, and a mix of aliphatic hydrocarbon solvents and aromatic hydrocarbon solvents, such as toluene and heptane. The capacity of solvent absorption for the aromatic hydrocarbon solvents was higher than for the aliphatic hydrocarbon solvents. In addition, the particles did not rupture or collapse after absorption in solvents. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4038–4056, 2000     

Characterization of dendrimer properties by capillary electrophoresis and their use as pseudostationary phases

The general properties of dendrimers and in particular their electrolytic characteristics that are relevant in electrokinetic separations, are described. In order to confirm theoretical considerations on commercial dendrimer charge and hydrodynamic radius, several capillary zone electrophoresis (CZE) experiments were performed. Electrophoretic mobilities measured at different pH values indicated a sensible increase of dendrimer hydrodynamic radius at pH values lower than 2.5. This was probably due to the Coulombic repulsion of charged amine groups of the inner dendrimer shells. The principal reasons that should address the use of dendrimers as pseudostationary phases in micellar electrokinetic chromatography (MEKC) are discussed. Moreover, a survey of different separations performed utilizing dendrimers in MEKC as well as of several future plausible uses of various classes of dendrimers is presented.     

Tagging alcohols with cyclic carbonate: a versatile equivalent of (meth)acrylate for ring-opening polymerization

Cyclic carbonate monomers based on a single biocompatible scaffold allow for incorporation of a wide range of functional groups into macromolecules via ring-opening polymerization.     

Solution properties of poly(methyl acrylate) and (1:1) poly(styrene-co-methyl acrylate)

Poly(methyl acrylate) (PMA) and 1:1 poly(styrene-co-methyl acrylate) (PSMA) were prepared by solution and bulk polymerization, respectively. The copolymer was analyzed with NMR to ascertain its composition and microstructure. The solution properties of unfractionated PMA and fractionated PSMA in ethyl acetate were investigated by light-scattering and viscosity techniques at 35°C. Narrow composition heterogeneity as revealed from the light-scattering measurements in different solvents justified the use of a single solvent for the copolymer characterization. The equations relating the limiting viscosity number to molecular weight, the molecular dimension to molecular weight, etc., were found for homopolymer and copolymers in ethyl acetate at 35°C. In the evaluation of the Flory constant K for the unperturbed state by methods based on Flory-Fox-Schaefgen, Kurata-Stockmayer, and Stockmayer-Fixman expressions, only the first method gave a value for PMA in ethyl acetate, consistent with that obtained in other solvents, whereas similar values of K were obtained by the three methods for PSMA in ethyl acetate. The studies indicate reduced thermodynamic interaction for PSMA–ethyl acetate compared to PMA–ethyl acetate, but increased steric effect in the copolymer compared with the homopolymer.     

Kinetic investigations on the photopolymerization of di- and tetrafunctional (meth)acrylic monomers in polymeric matrices. ESR and calorimetric studies. I. Reactions under irradiation

The photopolymerization of several di- and tetrafunctional (meth)acrylic monomers in the presence of a styrene–butadiene–styrene polymeric matrix (SBS) has been studied. Electron spin resonance spectroscopy (ESR) and differential scanning photocalorimetry (photo-DSC) were used as monitoring techniques to identify the photogenerated radicals and analyze photopolymerization profiles, radical environments, and radical secondary reactions. The study of the photopolymerization and/or photocrosslinking reactions of these monomers in the solid media was carried out by taking into consideration different factors, such as the influence of both monomer and photoinitiator structures on the hydrogen abstraction in the binder with formation of benzylic and allylic radicals, the polymerization of the monomers itself and the hydrogen abstraction reaction in the polymerized acrylic chains. Finally, irradiation of the system SBS/photoinitiator in the absence of monomer was also accomplished. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 2775–2783, 1998     

Proton-ionizable acyclic dibenzopolyethers and their polymers for use in selective lead(II) separation

Abstract

2,2′-[1,2-Ethanediylbis(oxy)]bisbenzoic acid (1), 2,2′-[oxybis(1,2-ethanediyloxy)]bisbenzoic acid (2), 1,2-[2′-(acetoxy)phenoxy] ethane (3), and 1,5-[2′-(acetoxy)phenoxy]-3-oxopentane (4) have been prepared for use in selective Pb(II) separation. The extraction of Pb(II) and Cu(II) from buffered aqueous solutions of varying pH into chloroform by 1–4 is examined in relation to their molecular structure. Compound 1 with an ethylene glycol spacer unit exhibits excellent extraction selectivity for Pb(II) over Cu(II). Lengthening the spacer group to a diethylene glycol unit diminishes the extraction efficiency and selectivity. For 3 and 4, extraction was inefficient due to low lipophilicity and solubility of the ligands in chloroform. Condensation polymerization of compounds 3 and 4 with formaldehyde in formic acid provides stable chelating resins 5 and 6 which contain both ion-exchange and polyether binding sites for metal complexation. Resin 5 with an ethylene glycol spacer group is found to be an effective chelating resin for Pb(II) separation. The sorption mechanism and selectivity are studied and compared with the commercially available iminodiacetic acid resin CR-10.     

Performances of new sugar-bearing poly(acrylamide) copolymers as DNA sieving matrices and capillary coatings for electrophoresis

We have synthesized two new sugar monomers, allylamine of gluconic and lactobionic acid, by opening the corresponding lactone ring with allylamine. These monomers were copolymerized with acrylamide leading to formation of copolymers with a relative molecular mass of 288000 and 180000 Da, respectively. Double-stranded DNA fragments were separated in entangled solutions of these linear polymers in capillary electrophoresis. Resolution, peak spacing and peak width were the parameters taken into account to evaluate the quality of the separation achieved with the new polymers. This work indicates that the copolymers of acrylamide and allyl gluconic acid have a high sieving capacity and provide a performance similar to that of hydroxyethylcellulose (HEC) of comparable viscosity. Unlike HEC, this copolymer selfcoats onto the capillary wall, allowing DNA fragments to be efficiently separated in an uncoated capillary.     

Phosphorescence studies of relaxation effects in bulk polymers. I. Depolarization measurements of segmental relaxation in poly(methyl acrylate)

This paper reports the first measurements of macromolecular segmental relaxation times by phosphorescence depolarization. Steady-state phosphorescence polarization experiments were performed on samples of poly(methyl acrylate) incorporating 0.5 wt % copolymerized acenaphthylene or 1-vinyl naphthalene as phosphorescent probes over the temperature range 77 to 310°K. Depolarization of phosphorescence occurs with the onset of segmental motion of the polymer at ca. 278°K. Motion of either probe is characterized by an activation energy of 195 (±5) kJ mole^?1, which is in fair agreement with the mean value of 230 kJ mole^?1 estimated for the segmental relaxation of poly(methyl acrylate) by dielectric and mechanical relaxation techniques. Transient depolarization measurements confirm the absence of probe motion below the glass transition temperature. Phosphorescence intensity and triplet state lifetime data are capable of detection of a second transition in the polymer in accord with observations using more conventional techniques.     

Copolymers of 1-vinylimidazole and (meth)acrylic acid: Synthesis and polyelectrolyte properties

New hydrophilic polyampholytes have been synthesized by copolymerization of 1-vinylimidazole with sodium salts of acrylic and methacrylic acids. Copolymerization reactivity ratios of the monomers are equal to: 0.54 ± 0.06 and 1.3 ± 0.3 for 1-vinylimidazole-sodium acrylate, 0.23 ± 0.01 and 2.6 ± 0.2 for 1-vinylimidazole-sodium methacrylate systems, correspondingly. Isoelectric point of the copolymers changes continuously from 2.8 to 6.7 with increasing the 1-vinylimidazole content in contrast to polyampholytes with amino instead of imidazole side groups, whose isoelectric point changes discontinuously with changing composition. Static and dynamic light scattering data point to tendency of polyampholyte macromolecules to aggregation, even at pH values far from isoelectric point.     

Bis(fluoroalkyl)acrylic and methacrylic phosphate monomers, their polymers and some of their properties

Ten fluoromonomers of structure (R_FO)₂P(O)OCH₂CH₂OC(O)CRCH₂ were made in 30-64% yield by treating the chloridates (R_FO)₂P(O)Cl with HOCH₂CH₂OC(O)CRCH₂ in chloroform in the presence of triethylamine [R_F=CF₃CH₂, C₂F₅CH₂, C₃F₇CH₂, C₄F₉CH₂, C₄F₉CH₂CH₂ or C₆F₁₃CH₂CH₂; R  H or Me]. The chloromonomer (CCl₃CH₂O)₂P(O)OCH₂CH₂OC(O)CHCH₂ was obtained analogously in 29% yield. Polymerisation of the acrylate monomers, but not the methacrylate monomers, could be effected using α-azoisobutyronitrile as a radical initiator. Acrylic polymers having CF₃CH₂O, CCl₃CH₂O and C₆F₁₃CH₂CH₂O side-chains were obtained as translucent rubbers. Specimens of cotton fabric were treated with solutions of the polymers, and average water and oil repellency ratings measured. Fabric coated with the polymer with the C₆F₁₃CH₂CH₂O side-chain afforded protection from penetration of the test liquids. Treated fabrics were subjected to the limiting oxygen index (LOI) test according to BS EN ISO 4589-2 (1999): this test determines the point at which a material just burns in a volumetric flow of oxygen and nitrogen. The treated fabrics were more fire-resistant (LOI 22-29%) than the untreated fabric (LOI 18%). Fabric coated with the CCl₃CH₂O-based polymer can be considered fire-retardant (LOI 29%). The fluoromonomers were tested for anti-acetylcholinesterase activity and were found to be poor enzyme inhibitors; they are predicted to possess low acute toxicity.