Ba adsorption on the stoichiometric and defective TiO(2) (110) surface from first-principles calculations

A theoretical study on Ba adsorption on the rutile TiO(2) (110) surface has been carried out by means of plane-wave, plane augmented waves potential, density functional theory calculations. A model consisting on a (4 x 1) unit cell, which corresponds to coverage of 0.125 monolayer (ML), has been used and several potential adsorption sites on the stoichiometric surface have been tried. It has been found that the most stable site is with the Ba atom in a position where it is bound to two bridging oxygen atoms and an in-plane oxygen atom forming equivalent bonds (OB site). The adsorption energy is 0.71 eV referred to the formation of Ba bulk and is about 0.3 eV more stable than other adsorption sites. The Ba-surface interaction produces some surface relaxation in all cases. The OB site is stable at moderate temperatures; however, after extensive molecular dynamic calculations it is found that atoms diffuse on the surface by means of a jumping mechanism among several stable positions. The presence of bridging oxygen vacancies does not alter significantly this picture since the adsorption close to defects is not energetically favorable and the atoms tend to move away from vacancies. A strong covalent character has been found in the nature of the bonding, which contrasts with previous suggestions of the existence of Ba(2+) species on the surface. When the coverage is increased to 0.25 ML by adding a Ba atom to the supercell, there is a significant repulsion between Ba atoms that move away from each other to occupy OB sites. Thus, the adsorption energy values per atom diminish. For the stoichiometric surface two equivalent adsorption patterns are found, whereas only one is found for the defective surface.     

NO adsorption on the stoichiometric and reduced SnO2(110) surface

The adsorption of NO molecules on the perfect and defective (110) surfaces of SnO₂ was studied with first-principles methods at the density-functional theory level. It was found that NO mainly interacts via the nitrogen atom with the bridging oxygens of the stoichiometric surface while the coordinatively unsaturated surface Sn atoms are less reactive. On the oxygen-deficient surface, NO is preferentially adsorbed at the vacancy positions, with the nitrogen atom close to the former surface oxygen site. Regardless of the adsorption site, the unpaired electron is located mainly on the NO molecule and only partly on surface Sn atoms. The results for the SnO₂ surface are compared to literature results on the isostructural TiO₂ rutile (110) surface. Dedicated to Professor Karl Jug on the occasion of his 65th birthday     

Dissociative adsorption of NO on TiO2 (110)-(1 x 2) surface: Ti2O3 rows as actives sites for the adsorption

The interaction of NO with TiO2 (110)-(1 x 2) surface has been studied by X-ray photoelectron spectroscopy, ultraviolet photoelectron spectroscopy, Auger electron spectroscopy, and low-energy electron diffraction, with the aim to clarify the role of ordered defects in NO reactivity toward TiO2. The interaction was studied for exposures up to 2000 L. However, the main effects occur already in the first 2 L. The exposure of the surfaces to NO resulted in the healing of defect sites without adsorption of N and low-energy electron diffraction shows that the surface (1 x 2) symmetry is not lost after the NO dose.     

Theoretical study of adsorption of O((3)P) and H(2)O on the rutile TiO(2)(110) surface

The adsorption of oxygen atoms O(3P) on both ideal and hydrated rutile TiO(2)(110) surfaces is investigated by periodic density functional theory (DFT) calculations within the revised Perdew-Burke-Ernzerhof (RPBE) generalized gradient approximation and a four Ti-layer slab, with (2 x 1) and (3 x 1) surface unit cells. It is shown that upon adsorption on the TiO(2) surface the spin of the O atom is completely lost, leading to stable surface peroxide species on both in-plane and bridging oxygen sites with O-binding energies of about 1.0-1.5 eV, rather than to the kinetically unstable terminal Ti-O and terminal O-O species with smaller binding energies of 0.1-0.7 eV. Changes in O-atom coverage ratios between 1/3 and 1 molecular layer (ML) and coadsorption of H(2)O have only minor effects on the O-binding energies of the stable peroxide configurations. High O-atom diffusion barriers of about 1 eV are found, suggesting a slow recombination rate of adsorbed O atoms on TiO(2)(110). Our results suggest that the TiOOTi peroxide intermediate experimentally observed in photoelectrolysis of water should be interpreted as a single spinless O adatom on TiO(2) surface rather than as two Ti-O* radicals coupled together.     

First-row transition metal atoms adsorption on rutile TiO2(110) surface

We performed periodic DFT calculations for adsorption of metal atoms on a perfect rutile TiO₂(110) surface (at low coverage, ???=?1/3) to investigate the interaction of an individual metal atom with TiO₂ and to compare it with a study previously done on MgO(100). We considered partial period of Mendeleev??s table from K to Zn. The overall evolution of the adsorption energies shows two maxima as for MgO(100). Two main differences, however, exist: the adsorption energy is much stronger and the first maximum is enhanced relative to the second one. This is attributed to the reducibility of the surface titanium cation. When the adsorbed metal is electropositive, it is oxidized under adsorption transferring electrons to titanium cations. We present the effect of introducing a Hubbard term to the gradient-corrected approximation band-structure Hamiltonian (GGA?+?U). The introduction of a reasonable Hubbard correction preserves the trends and allows localizing the electron of the reduction on Ti atoms in the near surface region. Finally, our results conclude that for heavier M atoms of the period, insertion is energetically favored relative to adsorption.     

Site competition during coadsorption of acetone with methanol and water on TiO2(110)

The competitive interaction between acetone and two solvent molecules (methanol and water) for surface sites on rutile TiO(2)(110) was studied using temperature-programmed desorption (TPD). On a vacuum-annealed TiO(2)(110) surface, which possessed ~5% oxygen vacancy sites, excess methanol displaced preadsorbed acetone molecules to weakly bound and physisorbed desorption states below 200 K. In contrast, acetone molecules were stabilized on an oxidized surface against displacement by methanol through formation of acetone diolate species. The behavior of acetone with methanol differs from the interactions between acetone and water which are less competitive. Examination of acetone + methanol and acetone + water multilayer combinations shows that acetone is more compatible in water-ice films than in methanol-ice films, presumably because water has greater potential as a hydrogen-bond donor than does methanol. Acetone molecules displaced from the TiO(2)(110) surface by water are more likely to be retained in the near-surface region, in turn having a greater opportunity to revisit the surface, than when methanol is used as a coadsorbate.     

Adsorption of O2 and oxidation of CO at Au nanoparticles supported by TiO2(110)

Density functional theory calculations are performed for the adsorption of O2, coadsorption of CO, and the CO+O2 reaction at the interfacial perimeter of nanoparticles supported by rutile TiO2(110). Both stoichiometric and reduced TiO2 surfaces are considered, with various relative arrangements of the supported Au particles with respect to the substrate vacancies. Rather stable binding configurations are found for the O2 adsorbed either at the trough Ti atoms or leaning against the Au particles. The presence of a supported Au particle strongly stabilizes the adsorption of O2. A sizable electronic charge transfer from the Au to the O2 is found together with a concomitant electronic polarization of the support meaning that the substrate is mediating the charge transfer. The O2 attains two different charge states, with either one or two surplus electrons depending on the precise O2 adsorption site at or in front of the Au particle. From the least charged state, the O2 can react with CO adsorbed at the edge sites of the Au particles leading to the formation of CO2 with very low (approximately 0.15 eV) energy barriers.     

A DFT study of acetonitrile adsorption and decomposition on the TiO2 (110) surface

The adsorption and decomposition of acetonitrile on the TiO₂ (110) surface have been investigated with first principles calculations. Our results reveal that both C?N and C? C bonds of acetonitrile become weakened after adsorption. Acetonitrile behaves as an electron donor, and electrons transfer from acetonitrile to substrate is obvious. The reaction mechanism of further decomposition of acetonitrile on TiO₂ (110) surface is also investigated, and the result shows that acetonitrile can decompose into CH₃ and CN fragments and form OCH₃ and NCO groups on the TiO₂ (110) surface, which consists with the experimental results. © 2010 Wiley Periodicals, Inc. Int J Quantum Chem, 2011     

Adsorption of platinum on the stoichiometric RuO2(110) surface

Density functional theory was used to calculate the geometries and electronic structures of Pt adsorption on the stoichiometric RuO(2)(110) surface at different coverages. The calculated results revealed that the Pt atoms strongly adsorb on RuO(2), and two-dimensional growth up to 1.25 ML deposition is energetically favorable. At low coverage, the binding between Pt and RuO(2) is very strong, accompanied by a significant transfer of electron density from Pt to the support and a large downshift of the d-band compared to that of the unsupported Pt. At high coverage, a weak interaction of RuO(2) with the Pt cluster is observed, and the electronic structure of Pt is only slightly modified with respect to that of the unsupported material. Our results suggest that among the systems investigated, the RuO(2)-supported Pt at a coverage of 1 ML may become one of the best alternatives to pure Pt as a catalyst because it combines a high stability and a moderate activity similar to Pt.     

Intact size-selected Au(n) clusters on a TiO2(110)-(1 x 1) surface at room temperature

Experiments in which mass-selected gold clusters were deposited on a surface have found that the catalytic properties depend strongly on cluster size. However, these experiments have not established definitively that the clusters maintain their size after deposition. We report here work in which we deposit low kinetic energy, mass-selected Aun+ (n = 1-8) clusters on a rutile TiO2(1 x 1) surface and use ultrahigh vacuum scanning tunneling microscopy (UHV-STM) to determine their size and shape.     

Activation of gold on titania: adsorption and reaction of SO(2) on Au/TiO(2)(110)

Synchrotron-based high-resolution photoemission and first-principles density-functional slab calculations were used to study the interaction of gold with titania and the chemistry of SO(2) on Au/TiO(2)(110) surfaces. The deposition of Au nanoparticles on TiO(2)(110) produces a system with an extraordinary ability to adsorb and dissociate SO(2). In this respect, Au/TiO(2) is much more chemically active than metallic gold or stoichiometric titania. On Au(111) and rough polycrystalline surfaces of gold, SO(2) bonds weakly and desorbs intact at temperatures below 200 K. For the adsorption of SO(2) on TiO(2)(110) at 300 K, SO(4) is the only product (SO(2) + O(oxide) --> SO(4,ads)). In contrast, Au/TiO(2)(110) surfaces (theta;(Au) < or = 0.5 ML) fully dissociate the SO(2) molecule under identical reaction conditions. Interactions with titania electronically perturb gold, making it more chemically active. Furthermore, our experimental and theoretical results show quite clearly that not only gold is perturbed when gold and titania interact. The adsorbed gold, on its part, enhances the reactivity of titania by facilitating the migration of O vacancies from the bulk to the surface of the oxide. In general, the complex coupling of these phenomena must be taken into consideration when trying to explain the unusual chemical and catalytic activity of Au/TiO(2). In many situations, the oxide support can be much more than a simple spectator.     

H(2) and CO(2) coadsorption effects in CO adsorption over nanosized Au/gamma-Al(2)O(3) catalysts

The present study is focused on the kinetic investigation of the effects of H(2) and CO(2) on the rates related to the elementary steps of CO sorption over Au/gamma-Al(2)O(3). The kinetic study was carried out in a wide temperature range (50-300 degrees C) by the novel methodology of reversed flow gas chromatography (RF-GC). The findings of preliminary coadsorption studies of CO with H(2), O(2) and O(2)+H(2) indicate that a reductive pre-treatment of the Au catalyst with a mixture of CO in excess of H(2) can be more beneficial concerning CO oxidation activity at low temperatures, compared to the usual reduction in a diluted hydrogen atmosphere, most probably due to the easier activation of oxygen molecules. At high temperatures the rate of reversed water gas shift reaction becomes significant resulting in H(2) and CO(2) consumption. The kinetic findings indicate that hydrogen strongly influences the adsorption of CO over Au/gamma-Al(2)O(3), by enhancing CO adsorption at lower temperatures and weakening the strength CO binding. On the other hand, CO(2) adsorption competes that of CO under hydrogen-rich conditions. However, the strength of CO(2) bonding is higher compared to that of CO and it further increases at higher temperatures, in agreement with the observed deactivation of the selective CO oxidation in the presence of CO(2).     

A density functional theory study of the coadsorption of water and oxygen on TiO2(110)

The behavior of adsorbed water on oxides is of fundamental interest in many areas. Despite considerable attention received recently, our understanding of water chemistry is still short of needs and expectations, particularly on the topic of the coadsorption of water and other species. In this study we carry out density functional theory calculations to investigate the coadsorption of water and oxygen on the TiO(2)(110) surface. We show that oxygen exerts profound influences on the water adsorption, altering the mechanism of water dissociation. On the one hand, the possible dissociation route along [-110] is prohibited due to the weakening of the H bond between water and the lattice bridging oxygen in the presence of the coadsorbed oxygen, and on the other hand the coadsorbed oxygen induces dissociation along [001]. These results lead to a consistent interpretation of experiments. Furthermore, several possible final states and the related formation mechanisms are discussed in detail.     

Li ion scattering from Au nanoclusters on TiO2(110)

The neutralization of low energy 7Li+ scattered from Au nanoclusters deposited on TiO2(110) was measured with time-of-flight spectroscopy as a function of cluster size, emission angle, and ion energy. The neutralization shows maxima for cluster diameters approximately 3 nm, and again for thick Au films. The data are compared to previous experiments with Na projectiles. Possible explanations of the observed effects are discussed.     

Probing organic layers on the TiO2(110) surface

In this work, we use first principles simulations to provide features of the dynamic scanning force microscopy imaging of adsorbed organic layers on insulating surfaces. We consider monolayers of formic (HCOOH) and acetic (CH(3)COOH) acid and a mixed layer of acetic and trifluoroacetic acids (CF(3)COOH) on the TiO(2)(110) surface and study their interaction with a silicon dangling bond tip. The results demonstrate that the silicon tip interacts more strongly with the substrate and the COO(-) group than the adsorbed acid headgroups, and, therefore, molecules would appear dark in images. The pattern of contrast and apparent height of molecules is determined by the repulsion between the tip and the molecular headgroups and by significant deformation of the monolayer and individual molecules. The height of the molecule on the surface and the size of the headgroup play a large role in determining access of the tip to the substrate and, hence, the contrast in images. Direct imaging of the molecules themselves could be obtained by providing a functionalized tip with attraction to the molecular headgroups, for example, a positive potential tip.     

Density functional study of the interaction between small Au clusters, Au(n) (n=1-7) and the rutile TiO(2) surface. I. Adsorption on the stoichiometric surface

This is the first paper in a series of four dealing with the adsorption site, electronic structure, and chemistry of small Au clusters, Au(n) (n=1-7), supported on stoichiometric, partially reduced, or partially hydroxylated rutile TiO(2)(110) surfaces. Analysis of the electronic structure reveals that the main contribution to the binding energy is the overlap between the highest occupied molecular orbitals of Au clusters and the Kohn-Sham orbitals localized on the bridging and the in-plane oxygen of the rutile TiO(2)(110) surface. The structure of adsorbed Au(n) differs from that in the gas phase mostly because the cluster wants to maximize this orbital overlap and to increase the number of Au-O bonds. For example, the equilibrium structures of Au(5) and Au(7) are planar in the gas phase, while the adsorbed Au(5) has a distorted two-dimensional structure and the adsorbed Au(7) is three-dimensional. The dissociation of an adsorbed cluster into two adsorbed fragments is endothermic, for all clusters, by at least 0.8 eV. This does not mean that the gas-phase clusters hitting the surface with kinetic energy greater than 0.8 eV will fragment. To place enough energy in the reaction coordinate for fragmentation, the impact kinetic energy needs to be substantially higher than 0.8 eV. We have also calculated the interaction energy between all pairs of Au clusters. These interactions are small except when a Au monomer is coadsorbed with a Au(n) with odd n. In this case the interaction energy is of the order of 0.7 eV and the two clusters interact through the support even when they are fairly far apart. This happens because the adsorption of a Au(n) cluster places electrons in the states of the bottom of the conduction band and these electrons help the Au monomer to bind to the five-coordinated Ti atoms on the surface.     

Interaction of organic molecules with the TiO2 (110) surface: ab inito calculations and classical force fields

We have studied the adsorption of a number of organic molecules consisting of methyl, benzyl, and carboxylic groups on the rutile TiO2 (110) surface using both ab initio and atomistic simulation techniques. We have tested the applicability of a simple embedded cluster model to studying the adsorption of small organic molecules on the perfect rutile TiO2 (110) surface, and used this model to develop a classical force field for the interactions of a wide class of organic molecules consisting of these groups with the rutile TiO2 (110) surface. The force field accounts for physisorption and ionic bonding of organic molecules at the surface. It allows the reproduction of adsorption energies and of geometries of organic molecules on the rutile surface. It should be useful for studying diffusion of these molecules and their manipulation with use of AFM and STM tips.     

Synthesis of TiO2 nanoparticles on the Au(111) surface

The growth of titanium oxide nanoparticles on reconstructed Au(111) was investigated by scanning tunneling microscopy and x-ray photoelectron spectroscopy. Ti was deposited by physical-vapor deposition at 300 K. Regular arrays of titanium nanoparticles form by preferential nucleation of Ti at the elbow sites of the herringbone reconstruction. The titanium oxide nanoclusters were synthesized by subsequent exposure to O(2) at 300 K. Two-and three-dimensional titanium oxide nanocrystallites form during annealing in the temperature range from 600 to 900 K. At the same time, the Au(111) surface assumes a serrated 110-oriented step-edge morphology suggesting step-edge pinning by titanium oxide nanoparticles. The oxidation state of the titanium oxide nanoparticles varies with annealing temperature. Specifically, annealing to 900 K results in the formation of stoichiometric TiO(2) nanocrystals as judged by the Ti(2p) binding energies measured in the x-ray photoelectron data. The nanodispersed TiO(2) on Au(111) is an ideal system to test the various models proposed for the enhanced catalytic reactivity of supported Au nanoparticles.     

Enantiospecific adsorption of cysteine at chiral kink sites on Au(110)-(1 x 2)

Enantiospecific adsorption of cysteine molecules onto chiral kink sites on the Au(110)-(1x2) surface was observed by scanning tunneling microscopy. l- and d-cysteine dimers were found to adopt distinctly different adsorption geometries at S kinks, which can be understood from the need to reach specific, optimum molecule-substrate interaction points. Extended, homochiral domains of l/d-cysteine were furthermore observed to grow preferentially from R/S kinks. The results constitute the first direct, microscopic observation of enantiospecific molecular interaction with chiral sites on a metal single-crystal surface.