Static fatigue fracture of polyethylene: A morphological analysis

The fracture properties of a number of high-density polyethylenes were evaluated and related to their morphology. The resistance to initiation of fracture is related to the resistance to voiding of the materials and the rate of coalescence of voids. The propensity of the materials to void has been shown to be related to the size of the amorphous region. The resistance to propagation of the fracture is also related to the above factors as well as the ease of stretching and rupture of fibrils. The ease of fibril formation has been shown to be related to the degree of perfection of the crystallites.     

How mobile NMR can help with the conservation of paintings

The conservation of paintings is fundamental to ensure that future generations will have access to the ideas of the grand masters who created these art pieces. Many factors, such as humidity, temperature, light, and pollutants, pose a risk to the conservation of paintings. To help with painting conservation, it is essential to be able to noninvasively study how these factors affect paintings and to develop methods to investigate their effects on painting degradation. Hence, the use of mobile nuclear magnetic resonance (NMR) as a method of investigation of paintings is gaining increased attention in the world of Heritage Science. In this mini-review, we discuss how this method was used to better understand the stratigraphy of paintings and the effect different factors have on the painting integrity, to analyze the different cleaning techniques suitable for painting conservation, and to show how mobile NMR can be used to identify forgeries. It is also important to keep in mind its limitations and build upon this information to optimize it to extend its applicability to the study of paintings and other precious objects of cultural heritage.     

Size-Exclusion Chromatography: A Twenty-First Century Perspective

Now in its sixth decade, size-exclusion chromatography (SEC) remains the premier method by which to determine the molar mass averages and distributions of natural and synthetic macromolecules. Aided by its coupling to a variety and multiplicity of detectors, it has also shown its ability to characterize a host of other physicochemical properties, such as branching, chemical, and sequence length heterogeneity size distribution; chain rigidity; fractal dimension and its change as a function of molar mass; etc. SEC is also an integral part of most macromolecular two-dimensional separations, providing a second-dimension size-based technique for determining the molar mass of the components separated in the first dimension according to chemical composition, thus yielding the combined chemical composition and molar mass distributions of a sample. While the potential of SEC remains strong, our awareness of the pitfalls and challenges inherent to it and to its practice must also be ever-present. This Perspective aims to highlight some of the advantages and applications of SEC, to bring to the fore these caveats with regard to its practice, and to provide an outlook as to potential areas for expansion and growth.

     

加深对现代分析仪器的认识提高使用与维修水平

熟悉了解仪器的总体结构性能,剖析零部件的功能,注重基础研究,弄清仪器的安全联锁保护是提高仪器使用与维修水平的关键;重视仪器的故障分析与判断、准确及地维修、合理地使用保养是保持仪器良好运行状态的唯一手段;建立仪器档案,定期进行性能测试是了解仪器,把握仪器运行脉搏、充分利用仪器的前提。     

Advancing the Drug Discovery and Development Process

The current state of affairs in the drug discovery and development process is briefly summarized and then ways to take advantage of the ever‐increasing fundamental knowledge and technical knowhow in chemistry and biology and related disciplines are discussed. The primary motivation of this Essay is to celebrate the great achievements of chemistry, biology, and medicine and to inform and inspire students and academics to enter the field of drug discovery and development while, at the same time, continue to advance the fundamentals of their disciplines. It is also meant to encourage and catalyze multidisciplinary partnerships between academia and industry as scientists attempt to merge their often complementary interests and expertise to achieve new improvements and breakthroughs in their respective fields, and the common goal of applying them to the discovery and invention of new and better medicines, especially in areas of unmet needs.     

杨石先对农药化学学科的重要贡献及其学术思想

杨石先先生一生献身于我国的教育事业与化学学科的发展,在62年中为我国培养了无数高质量的科教人才。他除了长期担任南开大学校长之外, 还创建了我国大学第一个专职研究所,即元素有机化学研究所。他率先开展了我国元素有机化学与农药化学的科学研究,领导了元素有机化学国家重点实验室的建立,是我国元素有机化学和农药化学的奠基人和开拓者。他倡导用有机化学的专业知识,科学和系统地开展农药化学研究,组建队伍获得20项科研成果,发表上百篇科学与论述性论文,为我国开展自主创新农药研究事业作出重要贡献。在农药化学学科的学术思想中,他强调要弄清该学科的交叉性、系统性和内在规律性,倡导要学习国际先进经验,要结合国情自主创新,要为国家经济服务,要对世界农药科技做出贡献。他毕生对人才培养给予了特别的重视,为我国科技事业持续发展作出了重大贡献。     

Hygienic aspects related to burial

Burial grounds are generally provided by local authorities in cemeteries (subject to planning consent and to compliance with any considerations for environmental health). Their design has been submitted to studies of hydrogeological characteristics of soil with regard to its ability to purify wastewater coming from corpse decomposition, its ability to avoid the infiltration of pollutants in groundwater, and its ability to skeletonize buried corpses within the given times foreseen by the law in force. Greater environmental awareness has necessitated that new and existing burial grounds are assessed to determine the environmental load which they could release to soil or any downstream component. This problem arises in countries where there is a high density of built-up areas, a custom of disposing of the dead by burial, a lack of available spaces and suitable soils to designate as burial grounds. This paper reports some results from a study carried out on ground lands of Italy in order to revise articles 82 and 83 of the Decree No 285 of 1990 in force in relation to burial grounds. Soil permeability to water and air is a parameter of critical importance in relation to purification and/or diffusion of leachates from inhumed corpses in the soil, and in relation to its influence on the time necessary to completely skeletonize a human corpse.     

Efficient analyte oxidation in an electrospray ion source using a porous flow-through electrode emitter

This article describes the components, operation, and use of a porous flow-through electrode emitter in an electrospray ion source. This emitter electrode geometry provided enhanced mass transport to the electrode surface to exploit the inherent electrochemistry of the electrospray process for efficient analyte oxidation at flow rates up to 800 microL/min. An upstream current loop in the electrospray source circuit, formed by a grounded contact to solution upstream of the emitter electrode, was utilized to increase the magnitude of the total current at the emitter electrode to overcome current limits to efficient oxidation. The resistance in this upstream current loop was altered to control the current and "dial-in" the extent of analyte oxidation, and thus, the abundance and nature of the oxidized analyte ions observed in the mass spectrum. The oxidation of reserpine to form a variety of products by multiple electron transfer reactions and oxidation of the ferroceneboronate derivative of pinacol to form the ES active radical cation were used to study and to illustrate the performance of this new emitter electrode design. Flow injection, continuous infusion, and on-line HPLC experiments were performed.     

Molecular polarizability of organic compounds and their complexes: LVI. Molar volume and structure in a solution of the compounds with several axes of intramolecular rotation

Molar volumes in solutions of compounds like orthoformic esters, trialkyl phosphates, trialkylphosphites, substituted aziridines, cyclopropanes, cyclohexanes, boroxines, N-aryl-4-pyridones, decalines, and cyclooctane were determined and discussed. Conformations of alkyl substituents in the esters were found to be similar to the conformations of the corresponding alkanes. Molar volumes of aziridines and cyclopropanes were found to be additive with respect to the molar volumes of bond and group increments. The nature of solvation of the molecules of these compounds was found to be similar to that in the model systems which served for the calculations of the increments. Molar volumes of cyclohexane, decaline, and cyclooctane also were found to be additive with respect to the contributions of the molar volumes of increments of the corresponding bonds and groups. The solvation and the steric structure of substituted boroxines were found to be similar to those of the structurally analogous substituted benzenes. Conformations of N-aryl-4-pyridone and its substituted derivatives in solutions were found to be similar to the conformations of biphenyl and its derivatives. A possibility of simplification of the methods for determining the dipole moments and Kerr constants of compounds from their additive molar volumes was demonstrated.     

Atmospheric oxidation mechanism of p-xylene: a density functional theory study

We report an investigation of the mechanistic features of OH-initiated oxidation reactions of p-xylene using density function theory (DFT). Reaction energies for the formation of the aromatic intermediate radicals have been obtained to determine their relative stability and reversibility, and their activation barriers have been analyzed to assess the energetically favorable pathways to propagate the p-xylene oxidation. OH addition is predicted to occur dominantly at the ortho position, with branching ratios of 0.8 and 0.2 for ortho and ipso additions, respectively, and the calculated overall rate constant is in agreement with available experimental studies. Under atmospheric conditions, the p-xylene peroxy radicals arising from initial OH and subsequent O(2) additions to the ring are shown to cyclize to form bicyclic radicals, rather than to react with NO to lead to ozone formation. With relatively low barriers, isomerization of the p-xylene bicyclic radicals to more stable epoxide radicals likely occurs, competing with O(2) addition to form bicyclic peroxy radicals. The study provides thermochemical and kinetic data for assessment of the photochemical production potential of ozone and formation of toxic products and secondary organic aerosol from p-xylene oxidation.     

高校无机化学实验室资源合理配置的探索与实践

高校实验室是“立德树人”的重要阵地,实验技术队伍是实现“三全育人”的重要保障。高校快速发展过程中,对实验技术队伍赋予了建设和管理的多重任务,而自身缺乏明确的发展方向和目标,实验技术队伍职业化研究成为高校发展的现实需求。构建适应高等学校发展的实验技术队伍专业化管理体系,明确实验队伍职业化发展路径选择的具体措施,促进实验技术队伍稳定性,强化实验技术队伍在高等学校治理结构和提升内涵建设的有效作用,为提升高校实验室育人功能奠定基础,为高等学校快速发展提供有力支撑。     

Regulation of π‐Stacked Anthracene Arrangement for Fluorescence Modulation of Organic Solid from Monomer to Excited Oligomer Emission

The construction and precise control of the face‐to‐face π‐stacked arrangements of anthracene fluorophores in the crystalline state led to a remarkable red shift in the fluorescence spectrum due to unprecedented excited oligomer formation. The arrangements were regulated by using organic salts including anthracene‐1,5‐disulfonic acid (1,5‐ADS) and a variety of aliphatic amines. Because of the smaller number of hydrogen atoms at the edge positions and the steric effect of the sulfonate groups, 1,5‐ADS should prefer face‐to‐face π‐stacked arrangements over the usual edge‐to‐face herringbone arrangement. Indeed, as the alkyl substituents were lengthened, the organic salts altered their anthracene arrangement to give two‐dimensional (2D) edge‐to‐face and end‐to‐face herringbone arrangements, one‐dimensional (1D) face‐to‐face zigzag and slipped stacking arrangements, a lateral 1D face‐to‐face arrangement like part of a brick wall, and a discrete monomer arrangement. The monomer arrangement behaved as a dilute solution even in the close‐packed solid state to emit deep blue light. The 1D face‐to‐face zigzag and slipped stacking of the anthracene fluorophores caused a red shift of 30–40 nm in the fluorescence emission with respect to the discrete arrangement, probably owing to ground‐state associations. On the other hand, the 2D end‐to‐face stacking induced a larger red shift of 60 nm, which is attributed to the excimer fluorescence. Surprisingly, the brick‐like lateral face‐to‐face arrangement afforded a remarkable red shift of 150 nm to give yellow fluorescence. This anomalous red shift is probably due to excited oligomer formation in such a lateral 1D arrangement according to the long fluorescence lifetime and little shift in the excitation spectrum. The regulation of the π‐stacked arrangement of anthracene fluorophores enabled the wide modulation of the fluorescence and a detailed investigation of the relationships between the photophysical properties and the arrangements.     

Measurement of ultraviolet exposure in epidemiological studies of skin and skin cancers

As our understanding of the role of UV in causing skin cancer continues to expand, researchers and clinicians must continue to remain up to date on the various means by which UV exposure can be quantified. The purpose of this article was to review the current methods used to measure lifetime exposure to UV and to summarize the strengths and weaknesses of each of these approaches. Thus we include here a review of research articles that deal with questionnaire reliability and physical examination. We also review more technologically advanced techniques used to measure chronic UV exposure; these include microtopography, histology, gene studies and spectroscopy. Both the utility of using a specific measurement technique and the accuracy of particular techniques are explored. Finally, we touch upon the results of articles that link UV exposure to skin cancer and what this means for the future of UV-induced skin cancer research.     

Free-energy component analysis of 40 protein-DNA complexes: a consensus view on the thermodynamics of binding at the molecular level

Noncovalent association of proteins to specific target sites on DNA--a process central to gene expression and regulation--has thus far proven to be idiosyncratic and elusive to generalizations on the nature of the driving forces. The spate of structural information on protein--DNA complexes sets the stage for theoretical investigations on the molecular thermodynamics of binding aimed at identifying forces responsible for specific macromolecular recognition. Computation of absolute binding free energies for systems of this complexity transiting from structural information is a stupendous task. Adopting some recent progresses in treating atomic level interactions in proteins and nucleic acids including solvent and salt effects, we have put together an energy component methodology cast in a phenomenological mode and amenable to systematic improvements and developed a computational first atlas of the free energy contributors to binding in approximately 40 protein-DNA complexes representing a variety of structural motifs and functions. Illustrating vividly the compensatory nature of the free energy components contributing to the energetics of recognition for attaining optimal binding, our results highlight unambiguously the roles played by packing, electrostatics including hydrogen bonds, ion and water release (cavitation) in protein-DNA binding. Cavitation and van der Waals contributions without exception favor complexation. The electrostatics is marginally unfavorable in a consensus view. Basic residues on the protein contribute favorably to binding despite the desolvation expense. The electrostatics arising from the acidic and neutral residues proves unfavorable to binding. An enveloping mode of binding to short stretches of DNA makes for a strong unfavorable net electrostatics but a highly favorable van der Waals and cavitation contribution. Thus, noncovalent protein-DNA association is a system-specific fine balancing act of these diverse competing forces. With the advances in computational methods as applied to macromolecular recognition, the challenge now seems to be to correlate the differential (initial vs. final) energetics to substituent effects in drug design and to move from affinity to specificity.     

Environments of ethidium binding to allosteric Dna: II. Accessibility, mobility and mode of binding

DNA binding compounds were previously shown to bind to the right-handed DNA forms and hybrid B-Z forms in a highly cooperative manner and indicate that structural specificity plays a key role in a ligand binding to DNA. In this study, the modes of binding and structural specificity of agents to unusual DNA are examined by a variety of fluorescence techniques (intensity, polarization and quenching, etc.) to explore a reliable method to detect the association environment of ligands to deoxyoligonucleotides initially containing a B-Z junction between the left-handed Z-DNA and right-handed B-DNA. The results of fluorescence energy transfer measurement demonstrated that the ligand molecules bind to the allosterically converted DNA structures by intercalation. In the absence of high-resolution structural data, this fluorescence energy transfer measurement allowed reliable measures and infer the binding environment of ligands to the allosteric DNA structures.     

The electrochemistry of electrode edges and its relevance to partially blocked voltammetric electrodes

Analytical mathematics and digital simulation are used to predict the response, to a potential jump, of the junction between insulating and conducting regions of an electrode. The simulation is carried out differentially and employs other novel features. Concentrations in the vicinity of edges of positive and negative curvatures, as well as straight edges, are analyzed by the model and thereby the faradaic current densities and currents are predicted. It is shown that, in addition to the well-understood cottrellian current arising from the surface of the conducting electrode, currents are generated that are proportional to the length of the edge and to its curvature. These results are then applied to inlaid disks and to partially blocked electrodes. The possibility is explored of using the response to a potential step to gain information on the geometry of a partially blocked electrode.     

Sensitivity of metal nanoparticle surface plasmon resonance to the dielectric environment

Electrodynamic simulations of gold nanoparticle spectra were used to investigate the sensitivity of localized surface plasmon band position to the refractive index, n, of the medium for nanoparticles of various shapes and nanoshells of various structures. Among single-component nanoparticles less than 130 nm in size, sensitivities of dipole resonance positions to bulk refractive index are found to depend only upon the wavelength of the resonance and the dielectric properties of the metal and the medium. Among particle plasmons that peak in the frequency range where the real part of the metal dielectric function varies linearly with wavelength and the imaginary part is small and slowly varying, the sensitivity of the peak wavelength, lambda, to refractive index, n, is found to be a linearly increasing function of lambda, regardless of the structural features of the particle that determine lambda. Quasistatic theory is used to derive an analytical expression for the refractive index sensitivity of small particle plasmon peaks. Through this analysis, the dependence of sensitivity on band position is found to be determined by the wavelength dependence of the real part, epsilon', of the particle dielectric function, and the sensitivity results are found to extend to all particles with resonance conditions of the form, epsilon' = -2chin(2), where chi is a function of geometric parameters and other constants. The sensitivity results observed using accurate computational methods for dipolar plasmon bands of gold nanodisks, nanorods, and hollow nanoshells extend, therefore, to particles of other shapes (such as hexagonal and chopped tetrahedral), composed of other metals, and to higher-order modes. The bulk refractive index sensitivity yielded by the theory serves as an upper bound to sensitivities of nanoparticles on dielectric substrates and sensitivities of nanoparticles to local refractive index changes, such as those associated with biomolecule sensing.     

Correlation of optical properties with structure of immobilised nanoparticles--a method for probing the mechanism of SERRS

A combined surface enhanced resonance Raman scattering (SERRS) and transmission electron microscopy (TEM) method has been developed allowing the same immobilised nanoparticles to be reliably located and studied by both techniques. The method allows large numbers of particles to be analysed by each technique relatively simply and the distribution of Raman enhancement between particles and clusters, as well as the relationship between particle microstructure and Raman enhancement, to be investigated. In addition, the effect of chemical and laser damage on the dye on the surface of the particles and the effect on the particles can be systematically investigated. These effects can cause time dependence fluctuations in Raman signals which could be confused with "blinking" from single molecules. Conditions were identified to enable Raman scattering to be detected without photodegradation to either the analyte molecules or the particles. Measurement outside this range gave rise to alterations in the spectra and to loss of signal. The extent of the damage to the analyte/particle if these conditions are not adhered to gives rise for concern about interpretation of changes in spectra observed unless an attempt is made to assess the limits of the conditions which can be applied before photodegradation or sample drying occurs. The method developed will enable reliable and systematic studies of the enhancement obtained from immobilised single particles by enabling the full power of high resolution TEM to be utilised to aid the development of a reliable SERRS theory.     

Diagnosis of public programs focused on herbal medicines in Brazil

The present study is aimed to diagnose the current public programs focused on herbal medicines in Brazil by means of in loco visits to 10 programs selected by means of questionnaires sent to 124 municipalities that count on herbal medicine services. The main purpose of the implementation of program programs is related to the development of medicinal herbs. 70% of them are intended for the production of herbal medicines and 50% are aimed to ensure the access of the population to medicinal plants and or herbal medicines. The initiative of the implementation of these programs was related to the managers (60%). The difficulties in this implementation were due to the lack of funding (100%) of the programs. In 60% of the programs, the physicians did not adhere to herbal medicine services due to the lack of knowledge of the subject. Training courses were proposed (80%) to increase the adhesion of prescribers to the system. Some municipalities use information obtained from patients to assess the therapeutic efficiency of medicinal plants and herbal medicines. Of the programs underway, cultivation of medicinal plants was observed in 90% and 78% of them adopt quality control. In most programs, this control is not performed in accordance with the legal requirements. The programs focused on medicinal plants and herbal medicines implemented in Brazil face some chronic problems of infrastructure, management, operational capacity and self-sustainability, which can be directly related to the absence of a national policy on medicinal plants and herbal medicines.