Effect of propyl paraben on the dipalmitoyl phosphatidic acid vesicles

The effect of the preservative propyl paraben (PPB) on the phase transition and dynamics of dipalmitoyl phosphatidic acid (DPPA)-buffer (pH 7.4/9.3) vesicles has been studied using DSC and ((1)H and (31)P) NMR. These investigations were carried out with DPPA dispersion in both multilamellar vesicular (MLV) and unilamellar vesicular (ULV) forms. DSC results indicate that the mechanism by which PPB interact with the DPPA vesicles is similar in MLV and ULV and is independent of pH of the buffer used to form the dispersion. However, for a given concentration of PPB, the perturbation in DPPA bilayer is more when the dispersion is prepared in buffer pH 7.4. PPB affected both the thermotropic phase transition and the molecular mobility of the DPPA membrane. In the presence of PPB, the gel to liquid crystalline phase transition temperature (T(m)) of the DPPA vesicles decreases hence increases membrane fluidity due to reduced headgroup-headgroup interaction. For all concentrations, the PPB molecules seem to get intercalated between the polar groups of the phospholipids with its alkyl chain penetrating into the co-operative region. At high PPB concentration, additional transitions are observed whose intensity increases with increasing PPB concentration. The large enthalpy values obtained at high PPB concentration suggest that presence of PPB makes the DPPA bilayer more ordered (rigid). The interesting finding obtained with MLV is that the stable gel phase of DPPA-buffer (pH 9.3/7.4) system in the presence of high PPB concentration becomes a metastable gel phase, this metastable gel phase on equilibration at 25 degrees C or when cooled to -20 degrees C transforms to a stable crystalline phase(s). The intensity of this new phase(s) increases with increasing PPB concentration. However, the transition temperatures of these new phases are not significantly changed with increasing PPB concentration. The effect of inclusion of cholesterol in the PPB-free and PPB-doped DPPA dispersion was also studied.     

Synthesis,characterization, and photophysical properties of paraben substituted cyclotriphosphazenes with hydrophilic side groups

Abstract

In this study, five new paraben substituted cyclotriphosphazene compounds containing hydrophilic glycol groups were successfully synthesized. All synthesized cyclotriphosphazene compounds 1-10 were fully characterized via general spectroscopic techniques such as ¹H, ³¹P NMR and MALDI-TOF mass spectrometry. In addition, the investigations of the UV-vis absorption and fluorescence emission properties of the 1-10 carried out via absorption and fluorescence spectroscopies in different solvents. The absorbance bands of the all synthesized compounds 1-10 were observed at about 230–300?nm in all solvents studied. Furthermore, the highest fluorescence emission intensity of the compounds 1-10 was observed in tetrahydrofuran at about 312?nm and the lowest emission intensity was observed in chloroform. The synthesized molecules can be used as custom designed molecules to investigate the DNA binding properties in automatic biosensor device in our laboratories, since they carry hydrophilic glycol units for water solubility and paraben derivatives for DNA effecting properties.     

Characterization of paraben substituted cyclotriphosphazenes,and a DNA interaction study with a real-time electrochemical profiling based biosensor

Microchimica Acta - This paper describes an amperometric method for studying DNA-drug candidate interactions. It uses an automatted electrochemical biosensor (MiSens®) based on real-time...     

GC–MS method for the determination of paraben preservatives in the human breast cancerous tissue

The general presumption that the preservative laden personal care products may be one of the causative agents for breast cancer, has remained a matter of controversy during this decade. Extensive studies have not been carried out to either prove or disprove the role of preservatives in breast cancer incidences. In this study we have developed a new method for the identification and quantification of the preservatives such as methyl paraben (MeP), ethyl paraben (EtP), propyl paraben (PrP) and butyl paraben (BuP) in breast tissue using Gas Chromatography and Mass Spectrometry (GC–MS). Tissue was extracted by using acetone:n-hexane mixture (1:1 v/v) and derivatized with N-Methyl-N-(trimethylsilyl) trifluoroacetamide (MSTFA). The extent of reaction time and the amount of MSTFA to attain greater derivatization were optimized. The developed method yielded good recovery (mean ± SD) of 99.8 ± 5.1, 96 ± 4.4, 107 ± 17 and 113 ± 13% with relative standard deviations (RSDs) of 5.1, 4.6, 15.6 and 13%, and the limits of detection (LOD) of 2.02, 1.05, 1.71 and 3.75 ng g^{− 1} for MeP, EtP, PrP and BuP, respectively. The method was successfully validated for the determination of parabens including butyl paraben (log K_ow = 3.57) in cancerous breast tissues; this could be a promising one for screening of breast tissues and also the environment for paraben residues. As far as our knowledge goes this is the first GC–MS method for the determination of parabens in human tissue.     

UV-spectrophotometric determination of ketoprofen and paraben in a gel preparation by partial least-squares calibration

Partial least-squares calibration was used for the simultaneous UV spectrophotometric determination of the active principle (ketoprofen) and preservative (parabens) in a pharmaceutical preparation commercially available in gel form. Calibration mixtures were prepared by mixing pure solutions of the analytes. The analytes were extracted and the UV spectrum of the resulting dispersion was recorded. Suppression of the effect of undissolved gel components was accomplished by prior centrifugation, using first and second-derivative spectra, introducing artificial baseline changes and adding the turbidity effect on the sample spectrum to some of the spectra in the calibration matrix. Both the second-derivative and the addition of the turbidity effect allow the quantification of non-centrifuged samples, the last one seems to be a little more effective. The results thus obtained are compared with those provided by HPLC following centrifugation of the samples.     

GC–MS method for the determination of paraben preservatives in the human breast cancerous tissue

The general presumption that the preservative laden personal care products may be one of the causative agents for breast cancer, has remained a matter of controversy during this decade. Extensive studies have not been carried out to either prove or disprove the role of preservatives in breast cancer incidences. In this study we have developed a new method for the identification and quantification of the preservatives such as methyl paraben (MeP), ethyl paraben (EtP), propyl paraben (PrP) and butyl paraben (BuP) in breast tissue using Gas Chromatography and Mass Spectrometry (GC–MS). Tissue was extracted by using acetone:n-hexane mixture (1:1 v/v) and derivatized with N-Methyl-N-(trimethylsilyl) trifluoroacetamide (MSTFA). The extent of reaction time and the amount of MSTFA to attain greater derivatization were optimized. The developed method yielded good recovery (mean ± SD) of 99.8 ± 5.1, 96 ± 4.4, 107 ± 17 and 113 ± 13% with relative standard deviations (RSDs) of 5.1, 4.6, 15.6 and 13%, and the limits of detection (LOD) of 2.02, 1.05, 1.71 and 3.75 ng g^− 1 for MeP, EtP, PrP and BuP, respectively. The method was successfully validated for the determination of parabens including butyl paraben (log K_ow = 3.57) in cancerous breast tissues; this could be a promising one for screening of breast tissues and also the environment for paraben residues. As far as our knowledge goes this is the first GC–MS method for the determination of parabens in human tissue.     

Isocratic liquid chromatographic determination of three paraben preservatives in hygiene wipes using a reversed phase core-shell narrow-bore column

The first HPLC method for the separation of three paraben preservatives (methyl-, ethyl- and propyl parabens) using a core-shell analytical column is reported in this study. The separation was completed in less than 8 min at a low flow rate of 0.4 mL min⁻¹ and an isocratic mobile phase containing 20% acetonitrile as organic modifier. The backpressure was < 200 bar in all cases, enabling the usage of conventional HPLC equipment. The proposed analytical procedure was validated for linearity (0.5–20 μg L⁻¹), limits of detection (15–43 μg L⁻¹) and quantification (50–142 μg L⁻¹), selectivity, within day (1.3–1.5%) and day-to-day (3.4–4.6%) precision and accuracy. The proposed method has been applied to the determination of the selected paraben preservatives in commercially available hygiene wipes. The mean percent recoveries were found to be in the range of 98.0–98.4%.      

Interaction of propyl paraben with dipalmitoyl phosphatidylcholine bilayer: a differential scanning calorimetry and nuclear magnetic resonance study

The influence of the preservative, propyl paraben (PPB) on the biophysical properties of dipalmitoyl phosphatidyl choline (DPPC) vesicles, both in multilamellar vesicle (MLV) and unilamellar vesicle (ULV) forms, has been studied using DSC and (¹H and ³¹P) NMR. The mechanism by which PPB interacts with DPPC bilayers was found to be independent of the morphological organization of the lipid bilayer. Incorporation of PPB in DPPC vesicles causes a significant depression in the transition temperature and enthalpy of both the pre-transition (PT) and the gel to liquid crystalline transition. The presence of the PPB also reduces the co-operativity of these transitions. However, at high PPB concentration the PT disappears. DSC and NMR findings indicate that: (i) PPB is bound strongly to the lipid bilayer leading to increased headgroup fluidity due to reduced headgroup–headgroup interaction and (ii) the PPB molecules are intercalated between the DPPC polar headgroups with its alkyl chain penetrate into the co-operative region. MLV incorporated with high PPB concentration shows additional transitions whose intensity increases with increasing PPB concentration. This phase segregation observed could probably be due to co-existence of PPB-rich and PPB-poor phospholipid domains within the bilayers. The effect of inclusion of cholesterol in the PPB-free and PPB-doped DPPC dispersion was also studied. Equilibration studies suggest that PPB molecules are very strongly bound and remain intercalated between the polar headgroup for prolonged time.     

双活性磺酸基蔗渣木聚糖对羟基苯甲酸酯的合成及活性模拟

以蔗渣木聚糖(BX)为主要原料、氨基三磺酸钠为酯化剂,在一步酯化合成磺酸基蔗渣木聚糖酯的基础上,利用磺酸基蔗渣木聚糖酯和对羟基苯甲酸进行二步酯化反应,合成了磺酸基蔗渣木聚糖对羟基苯甲酸酯,并考察了反应条件对酯化反应的影响,通过单因素实验确定了第二步酯化反应较佳的合成工艺条件.蔗渣木聚糖酯化改性前后的样品分别用FT-IR,DG-DTG和XRD进行了表征,并对该双酯化衍生物的分子进行了优化与活性模拟.结果表明:FT-IR证明双酯化产物含有磺酸基团和对羟基苯甲酸酯基团,TG-DTG分析表明该双酯化衍生物的热稳定性提高,XRD说明发生双酯化改性后分子排列的规整性提高,结晶度增加;活性模拟实现了磺酸基蔗渣木聚糖对羟基苯甲酸酯与艾滋病毒的对接.     

Amide-water interactions in cosolvent systems. I. Solubilities and apparent molar volumes of methyl paraben

Solubility and apparent molar volume data are used to demonstrate effects of amide alkylation on amide-water interactions at 25° C. Precise measurements were made of the apparent molar volumes of the amides in binary amide-water mixtures using a dilatometric technique. The results show that the apparent molar volumes of alkyl-substituted amides in water pass through a minimum at an amide concentration which varies inversely with the degree of alkylation. Further studies showed that the solubilities of methyl paraben (methyl-p-hydroxybenzoate) and naphthalene in various amide-water solvent systems increased in characteristic fashion with amide alkylation.     

Effects of solvent casted poly (lactic acid)/poly(ethylene glycol)/paraben derivative triazine films on antibacterial performance and cytotoxicity

A series of poly(lactic acid) (PLA) films that including fully paraben substituted triazine derivatives having anti-bacterial properties have been prepared by utilizing the solvent-casting method. PLA as biodegradable polymer, poly(ethylene glycol) (PEG) as a plasticizing agent and s-triazine molecules (TA01, TA02, TA03, TA04, and TA05) behaving as an anti-bacterial component have been utilized in the experiments. The influence of TA compounds on the antibacterial performance of PLA/PEG films was investigated for the first time against Gram-negative Escherichia coli (E. coli) and Gram-positive Staphylococcus aureus (S. aureus) bacteria via the contact active method. TA01-03-05 incorporated PLA/PEG films gave the best results against E.coli bacteria and log10 reductions of these films were 0.78, 0.64, and 0.65 respectively. The effect of TA compounds on the cell viability was investigated against cancer and non-cancerous cell lines using an MTS assay. The results showed that TA compounds had a positive effect on cell growth in non-cancerous cells, while they had a negative effect on cell growth in cancer cells. Furthermore, the addition of TA considerably increased the decomposition temperatures from 349° to 361° and char yield from 0.65 for PLA/PEG film to 2.3 for PLA/PEG/TA05. All of the films had good transparency and low opacity which was 7.2 for pure PLA used for control and the maximum opacity value was 11.2 observed for PLA/PEG/01. TA03 and TA04 caused a decrement of water vapor permission when compared to PLA/PEG films from 1439 to 749 and 664. It was also observed that pure PLA/PEG film lost weight rapidly over time during degradation tests. On the other hand, weight loss wasn't observed in PLA/PEG/TA films. This study focused on demonstrating the use of our new, flexible PLA/PEG derivatives in food and medical packaging.     

Miniaturized matrix solid‐phase dispersion coupled with supramolecular solvent‐based microextraction for the determination of paraben preservatives in cream samples

An analytical method is presented for the determination of paraben preservatives in semisolid cream samples by matrix solid‐phase dispersion combined with supramolecular solvent‐based microextraction. Due to the oily and sticky nature of the sample matrix, parabens were first extracted from the samples by matrix solid‐phase dispersion using silica as sorbent material with a clean‐up performed with tetrahydrofuran in the elution step. The eluate (500 μL), 1‐decanol (120 μL), and water (4.4 mL) were then mixed in a polyethylene pipette to form supramolecular solvent. Finally, the analytes in the supramolecular solvent were separated and determined by liquid chromatography with ultraviolet detection. Under optimal extraction conditions, the extraction recoveries of the studied compounds were obtained in the range of 63–83%. The limits of detection for the analytes were between 0.03 and 0.04 μg/g. The precision of the method varied between 4.0–6.7 (intraday) and 6.2–7.9% (interday). Finally, the optimized procedure was applied to the determination of the target preservatives in a variety of cream samples (diaper rash, skin allergy, face and hand moisturizing) with satisfactory recoveries (86–102%).     

Protonation constants of 1-hydroxyethylidene-1,1-diphosphonic acid, diethylenetriamino-N,N,N',N',N'-penta-acetic trans-1,2-diaminocyclohexane-N,N,N',N'-tetra-acetic acid

The stepwise stability constants for the protonation of hydroxyethylidenediphosphonic acid (HEDP), diethylenetriaminopenta-acetic acid (DTPA) and diaminocyclohexanetetra-acetic acid (DCTA) have been determined potentiometrically with a hydrogen electrode at an ionic strength of 1 (KCl) and at 10-35 degrees . The data were treated by a least-squares method for estimation of DeltaH and DeltaS values.     

Cubane, cuneane, and their carboxylates: a calorimetric, crystallographic, calculational, and conceptual coinvestigation

[reaction: see text] This study is a multinational, multidisciplinary contribution to the thermochemistry of dimethyl1,4-cubanedicarboxylate and the corresponding isomeric, cuneane derivative and provides both structural and thermochemical information regarding the rearrangement of dimethyl 1,4-cubanedicarboxylate to dimethyl 2,6-cuneanedicarboxylate. The enthalpies of formation in the condensed phase at T = 298.15 K of dimethyl 1,4-cubanedicarboxylate (dimethyl pentacyclo[4.2.0.0.(2,5)0.(3,8)0(4,7)]octane-1,4-dicarboxylate) and dimethyl 2,6-cuneanedicarboxylate (dimethyl pentacyclo[3.3.0.0.(2,4)0.(3,7)0(6,8)]octane-2,6-dicarboxylate) have been determined by combustion calorimetry, delta(f) H(o)m (cr)/kJ x mol(-1) = -232.62 +/- 5.84 and -413.02 +/- 5.16, respectively. The enthalpies of sublimation have been evaluated by combining vaporization enthalpies evaluated by correlation-gas chromatography and fusion enthalpies measured by differential scanning calorimetry and adjusted to T = 298.15 K, delta(cr) (g)Hm (298.15 K)/kJ x mol(-1) = 117.2 +/- 3.9 and 106.8 +/- 3.0, respectively. Combination of these two enthalpies resulted in delta(f) H(o)m (g., 298.15 K)/kJ x mol(-1) of -115.4 +/- 7.0 for dimethyl 1,4-cubanedicarboxylate and -306.2 +/- 6.0 for dimethyl 2,6-cuneanedicarboxylate. These measurements, accompanied by quantum chemical calculations, resulted in values of delta(f) Hm (g, 298.15 K) = 613.0 +/- 9.5 kJ x mol(-1) for cubane and 436.4 +/- 8.8 kJ x mol(-1) for cuneane. From these enthalpies of formation, strain enthalpies of 681.0 +/- 9.8 and 504.4 +/- 9.1 kJ x mol(-1) were calculated for cubane and cuneane by means of isodesmic reactions, respectively. Crystals of dimethyl 2,6-cuneanedicarboxylate are disordered; the substitution pattern and structure have been confirmed by determination of the X-ray crystal structure of the corresponding diacid.     

Multifunctional Redox Polymers: Electrochrome,Polyelectrolyte, Sensor,Electrode Modifier,Nanoparticle Stabilizer,and Catalyst Template

Simple “click” polycondensation metallopolymers of redox‐robust bis(ethynyl)biferrocene (biFc) and di(azido) poly(ethylene glycol) (PEG400 and PEG1000) were designed for multiple functions including improvement of water solubility and biocompatibility, the introduction of mixed valency and sensing capabilities, and as nanoparticle stabilizers for catalysis.     

Simultaneous determination of Cd, Pb, Cu, Sb, Bi, Se, Zn, Mn, Ni, Co and Fe in water samples by differential pulse stripping voltammetry at a hanging mercury drop electrode

A highly sensitive and selective voltammetric procedure is described for the simultaneous determination of eleven elements (Cd, Pb, Cu, Sb, Bi, Se, Zn, Mn, Ni, Co and Fe) in water samples. Firstly, differential pulse anodic stripping voltammetry (DPASV) with a hanging mercury drop electrode (HMDE) is used for the direct simultaneous determination of Cd, Pb, Cu, Sb and Bi in 0.1 M HCI solution (pH = 1) containing 2 M NaCl. Then, differential pulse cathodic stripping voltammetry (DPCSV) is used for the determination of Se in the same solution. Zn is subsequently determined by DPASV after raising the pH of the same solution to pH 4. Next, the pH of the medium is raised to pH 8.5 by adding NH3/NH4Cl buffer solution for the determination of Mn by DPASV. Ni and Co are determined in the same solution by differential pulse adsorptive stripping voltammetry (DPAdSV) after adding DMG (1 x 10(-4) M). Finally, 1 x 10(-5) M 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol (5-Br-PADAP) is added to the solution for the determination of Fe by DPAdSV. The optimal conditions are described. Relative standard deviations and relative errors are calculated for the eleven elements at three different concentration levels. The lower detection limits for the investigated elements range from 1.11 x 10(-10) to 1.05 x 10(-9)M, depending on the element determined. The proposed analysis scheme was applied for the determination of these eleven elements in some ground water samples.     

Syntheses, structure, and selected physical properties of CsLnMnSe3 (Ln = Sm, Gd, Tb, Dy, Ho, Er, Tm, Yb, Y) and AYbZnQ3 (A = Rb, Cs; Q = S, Se, Te)

CsLnMnSe(3) (Ln = Sm, Gd, Tb, Dy, Ho, Er, Tm, Yb, Y) and AYbZnQ(3) (A = Rb, Cs; Q = S, Se, Te) have been synthesized from solid-state reactions at temperatures in excess 1173 K. These isostructural materials crystallize in the layered KZrCuS(3) structure type in the orthorhombic space group Cmcm. The structure is composed of LnQ(6) octahedra and MQ(4) tetrahedra that share edges to form [LnMQ(3)] layers. These layers stack perpendicular to [010] and are separated by layers of face- and edge-sharing AQ(8) bicapped trigonal prisms. There are no Q-Q bonds in the structure of the ALnMQ(3) compounds so the formal oxidation states of A/Ln/M/Q are 1+/3+/2+/2-. The CsLnMnSe(3) materials, with the exception of CsYbMnSe(3), are Curie-Weiss paramagnets between 5 and 300 K. The magnetic susceptibility data for CsYbZnS(3), RbYbZnSe(3), and CsYbMSe(3) (M = Mn, Zn) show a weak cusp at approximately 10 K and pronounced differences between field-cooled and zero-field-cooled data. However, CsYbZnSe(3) is not an antiferromagnet because a neutron diffraction study indicates that CsYbZnSe(3) shows neither long-range magnetic ordering nor a phase change between 4 and 295 K. Nor is the compound a spin glass because the transition at 10 K does not depend on ac frequency. The optical band gaps of the (010) and (001) crystal faces for CsYbMnSe(3) are 1.60 and 1.59 eV, respectively; the optical band of the (010) crystal faces for CsYbZnS(3) and RbYbZnSe(3) are 2.61 and 2.07 eV, respectively.     

van der Waals corrections to density functional theory calculations: Methane,ethane, ethylene,benzene, formaldehyde,ammonia, water,PBE, and CPMD

Parameters are developed for a practical application of the empirical van der Waals (vdW) correction infrastructure available in the CPMD density functional theory (DFT) code. The binding energy, geometry, and potential energy surface (PES) are examined for methane, ethane, ethylene, formaldehyde, ammonia, three benzene dimer geometries, and three benzene–water geometries. The vdW corrected results compare favorably with MP2 and CCSD(T) calculations near the complete basis set limits, and with experimental results where they are available.     

Multifunctional Redox Polymers: Electrochrome,Polyelectrolyte, Sensor,Electrode Modifier,Nanoparticle Stabilizer,and Catalyst Template

Simple “click” polycondensation metallopolymers of redox‐robust bis(ethynyl)biferrocene (biFc) and di(azido) poly(ethylene glycol) (PEG400 and PEG1000) were designed for multiple functions including improvement of water solubility and biocompatibility, the introduction of mixed valency and sensing capabilities, and as nanoparticle stabilizers for catalysis.     

Polarizabilities and hyperpolarizabilities for the atoms Al, Si, P, S, Cl, and Ar: Coupled cluster calculations

Accurate static dipole polarizabilities and hyperpolarizabilities are calculated for the ground states of the Al, Si, P, S, Cl, and Ar atoms. The finite-field computations use energies obtained with various ab initio methods including Moller-Plesset perturbation theory and the coupled cluster approach. Excellent agreement with experiment is found for argon. The experimental alpha for Al is likely to be in error. Only limited comparisons are possible for the other atoms because hyperpolarizabilities have not been reported previously for most of these atoms. Our recommended values of the mean dipole polarizability (in the order Al-Ar) are alpha/e(2)a(0) (2)E(h) (-1)=57.74, 37.17, 24.93, 19.37, 14.57, and 11.085 with an error estimate of +/-0.5%. The recommended values of the mean second dipole hyperpolarizability (in the order Al-Ar) are gamma/e(4)a(0) (4)E(h) (-3)=2.02 x 10(5), 4.31 x 10(4), 1.14 x 10(4), 6.51 x 10(3), 2.73 x 10(3), and 1.18 x 10(3) with an error estimate of +/-2%. Our recommended polarizability anisotropy values are Deltaalpha/e(2)a(0) (2)E(h) (-1)=-25.60, 8.41, -3.63, and 1.71 for Al, Si, S, and Cl respectively, with an error estimate of +/-1%. The recommended hyperpolarizability anisotropies are Deltagamma/e(4)a(0) (4)E(h) (-3)=-3.88 x 10(5), 4.16 x 10(4), -7.00 x 10(3), and 1.65 x 10(3) for Al, Si, S, and Cl, respectively, with an error estimate of +/-4%.