Zirconium-catalyzed carboalumination of α-olefins and chain growth of aluminum alkyls: kinetics and mechanism

A mechanism based on Michaelis-Menten kinetics with competitive inhibition is proposed for both the Zr-catalyzed carboalumination of α-olefins and the Zr-catalyzed chain growth of aluminum alkyls from ethylene. AlMe(3) binds to the active catalyst in a rapidly maintained equilibrium to form a Zr/Al heterobimetallic, which inhibits polymerization and transfers chains from Zr to Al. The kinetics of both carboalumination and chain growth have been studied when catalyzed by [(EBI)Zr(μ-Me)(2)AlMe(2)][B(C(6)F(5))(4)]. In accord with the proposed mechanism, both reactions are first-order in [olefin] and [catalyst] and inverse first-order in [AlR(3)]. The position of the equilibria between various Zr/Al heterobimetallics and the corresponding zirconium methyl cations has been quantified by use of a Dixon plot, yielding K = 1.1(3) × 10(-4) M, 4.7(5) × 10(-4) M, and 7.6(7) × 10(-4) M at 40 °C in benzene for the catalyst species [rac-(EBI)Zr(μ-Me)(2)AlMe(2)][B(C(6)F(5))(4)], [Cp(2)Zr(μ-Me)(2)AlMe(2)][B(C(6)F(5))(4)], and [Me(2)C(Cp)(2)Zr(μ-Me)(2)AlMe(2)][B(C(6)F(5))(4)] respectively. These equilibrium constants are consistent with the solution behavior observed for the [Cp(2)Zr(μ-Me)(2)AlMe(2)][B(C(6)F(5))(4)] system, where all relevant species are observable by (1)H NMR. Alternative mechanisms for the Zr-catalyzed carboalumination of olefins involving singly bridged Zr/Al adducts have been discounted on the basis of kinetics and/or (1)H NMR EXSY experiments.     

Synthesis, structures, and reactivity of weakly coordinating anions with delocalized borate structure: the assessment of anion effects in metallocene polymerization catalysts.

The formation of adducts of tris(pentafluorophenyl)borane with strongly coordinating anions such as CN(-) and [M(CN)(4)](2)(-) (M = Ni, Pd) is a synthetically facile route to the bulky, very weakly coordinating anions [CN[B(C(6)F(5))(3)](2)](-) and [M[CNB(C(6)F(5))(3)](4)](2-) which are isolated as stable NHMe(2)Ph(+) and CPh(3)(+) salts. The crystal structures of [CPh(3)][CN[B(C(6)F(5))(3)](2)] (1), [CPh(3)][ClB(C(6)F(5))(3)] (2), [NHMe(2)Ph](2)[Ni[CNB(C(6)F(5))(3)](4)].2Me(2)CO (4b.2Me(2)CO), [CPh(3)](2)[Ni[CNB(C(6)F(5))(3)](4)].2CH(2)Cl(2) (4c.2CH(2)Cl(2)), and [CPh(3)](2)[Pd[CNB(C(6)F(5))(3)](4)].2CH(2)Cl(2) (5c.2CH(2)Cl(2)) are reported. The CN stretching frequencies in 4 and 5 are shifted by approximately 110 cm(-1) to higher wavenumbers compared to the parent tetracyano complexes in aqueous solution, although the M-C and C-N distances show no significant change on B(C(6)F(5))(3) coordination. Zirconocene dimethyl complexes L(2)ZrMe(2) [L(2) = Cp(2), SBI = rac-Me(2)Si(Ind)(2)] react with 1, 4c or 5c in benzene solution at 20 degrees C to give the salts of binuclear methyl-bridged cations, [(L(2)ZrMe)(2)(mu-Me)][CN[B(C(6)F(5))(3)](2)] and [(L(2)ZrMe)(2)(mu-Me)](2)[M[CNB(C(6)F(5))(3)](4)]. The reactivity of these species in solution was studied in comparison with the known [[(SBI)ZrMe](2)(mu-Me)][B(C(6)F(5))(4)]. While the latter reacts with excess [CPh(3)][B(C(6)F(5))(4)] in benzene to give the mononuclear ion pair [(SBI)ZrMe(+).B(C(6)F(5))(4)(-)] in a pseudo-first-order reaction, k = 3 x 10(-4) s(-1), [(L(2)ZrMe)(2)(mu-Me)][CN[B(C(6)F(5))(3)](2)] reacts to give a mixture of L(2)ZrMe(mu-Me)B(C(6)F(5))(3) and L(2)ZrMe(mu-NC)B(C(6)F(5))(3). Recrystallization of [Cp' '(2)Zr(mu-Me)(2)AlMe(2)][CN[B(C(6)F(5))(3)](2)] affords Cp' '(2)ZrMe(mu-NC)B(C(6)F(5))(3) 6, the X-ray structure of which is reported. The stability of [(L(2)ZrMe)(2)(mu-Me)](+)X(-) decreases in the order X = [B(C(6)F(5))(4)] > [M[CNB(C(6)F(5))(3)](4)] > [CN[B(C(6)F(5))(3)](2)] and increases strongly with the steric bulk of L(2) = Cp(2) < SBI. Activation of (SBI)ZrMe(2) by 1 in the presence of AlBu(i)(3) gives extremely active ethene polymerization catalysts. Polymerization studies at 1-7 bar monomer pressure suggest that these, and by implication most other highly active ethene polymerization catalysts, are strongly mass-transport limited. By contrast, monitoring propene polymerization activities with the systems (SBI)ZrMe(2)/1/AlBu(i)(3) and CGCTiMe(2)/1/AlBu(i)(3) at 20 degrees C as a function of catalyst concentration demonstrates that in these cases mass-transport limitation is absent up to [metal] approximately 2 x 10(-5) mol L(-1). Propene polymerization activities decrease in the order [CN[B(C(6)F(5))(3)](2)](-) > [B(C(6)F(5))(4)](-) > [M[CNB(C(6)F(5))(3)](4)](2-) > [MeB(C(6)F(5))(3)](-), with differences in activation barriers relative to [CN[B(C(6)F(5))(3)](2)](-) of DeltaDeltaG = 1.1 (B(C(6)F(5))(4)(-)), 4.1 (Ni[CNB(C(6)F(5))(3)](4)(2-)) and 10.7-12.8 kJ mol(-)(1) (MeB(C(6)F(5))(3)(-)). The data suggest that even in the case of very bulky anions with delocalized negative charge the displacement of the anion by the monomer must be involved in the rate-limiting step.     

The missing link in the coordination chemistry of hydrazines--a hydrazinetriide [N-N(Me)](3-) anion coordinated to five Al atoms

The heptanuclear aluminium-nitrogen cage compound [(AlMe(2))(4)(AlMe)(3)(NHNMe)(3)(N-NMe)(OMe)] contains the unique hydrazinetriide fragment [N-N(Me)](3-) stabilized by coordination to five Al atoms. It was synthesised by thermolysis of the sesqui-hydrazide Al[(μ-NH-NHMe)(2)AlMe(2)](3) in refluxing toluene in the presence of a small quantity of methanol.     

Synthesis, characterization, and reactivity of Fe complexes containing cyclic diazadiphosphine ligands: the role of the pendant base in heterolytic cleavage of H2

The iron complexes CpFe(P(Ph)(2)N(Bn)(2))Cl (1-Cl), CpFe(P(Ph)(2)N(Ph)(2))Cl (2-Cl), and CpFe(P(Ph)(2)C(5))Cl (3-Cl)(where P(Ph)(2)N(Bn)(2) is 1,5-dibenzyl-1,5-diaza-3,7-diphenyl-3,7-diphosphacyclooctane, P(Ph)(2)N(Ph)(2) is 1,3,5,7-tetraphenyl-1,5-diaza-3,7-diphosphacyclooctane, and P(Ph)(2)C(5) is 1,4-diphenyl-1,4-diphosphacycloheptane) have been synthesized and characterized by NMR spectroscopy, electrochemical studies, and X-ray diffraction. These chloride derivatives are readily converted to the corresponding hydride complexes [CpFe(P(Ph)(2)N(Bn)(2))H (1-H), CpFe(P(Ph)(2)N(Ph)(2))H (2-H), CpFe(P(Ph)(2)C(5))H (3-H)] and H(2) complexes [CpFe(P(Ph)(2)N(Bn)(2))(H(2))]BAr(F)(4), [1-H(2)]BAr(F)(4), (where BAr(F)(4) is B[(3,5-(CF(3))(2)C(6)H(3))(4)](-)), [CpFe(P(Ph)(2)N(Ph)(2))(H(2))]BAr(F)(4), [2-H(2)]BAr(F)(4), and [CpFe(P(Ph)(2)C(5))(H(2))]BAr(F)(4), [3-H(2)]BAr(F)(4), as well as [CpFe(P(Ph)(2)N(Bn)(2))(CO)]BAr(F)(4), [1-CO]Cl. Structural studies are reported for [1-H(2)]BAr(F)(4), 1-H, 2-H, and [1-CO]Cl. The conformations adopted by the chelate rings of the P(Ph)(2)N(Bn)(2) ligand in the different complexes are determined by attractive or repulsive interactions between the sixth ligand of these pseudo-octahedral complexes and the pendant N atom of the ring adjacent to the sixth ligand. An example of an attractive interaction is the observation that the distance between the N atom of the pendant amine and the C atom of the coordinated CO ligand for [1-CO]BAr(F)(4) is 2.848 ?, considerably shorter than the sum of the van der Waals radii of N and C atoms. Studies of H/D exchange by the complexes [1-H(2)](+), [2-H(2)](+), and [3-H(2)](+) carried out using H(2) and D(2) indicate that the relatively rapid H/D exchange observed for [1-H(2)](+) and [2-H(2)](+) compared to [3-H(2)](+) is consistent with intramolecular heterolytic cleavage of H(2) mediated by the pendant amine. Computational studies indicate a low barrier for heterolytic cleavage of H(2). These mononuclear Fe(II) dihydrogen complexes containing pendant amines in the ligands mimic crucial features of the distal Fe site of the active site of the [FeFe]-hydrogenase required for H-H bond formation and cleavage.     

烷基铝对球形MgCl_2负载的茂金属催化剂催化乙烯聚合的影响

以甲基铝氧烷(MAO)为助催化剂的茂金属催化剂虽然具有催化活性高、分子量分布窄、聚合物化学组成均匀等优点,但其极高的Al/Zr比和聚合物颗粒形态差等缺点限制了其工业化应用,因此对茂金属催化剂的负载化成为近年来的研究热点.在众多的载体中,球形MgCl2是研究得很少的一类载体,文献中曾采用先负载主催化剂茂金属配合物,聚合时再加入助催化剂MAO的方法[1],由于加入的MAO与主催化剂的络合能力很强,会使部分载上的主催化剂溶解下来,成为均相聚合[2,3],导致聚合物颗粒形态差,且粘釜现象严重.我们则采用相反的思路,即先将助催化剂MAO负载在球形MgCl2上,制得MgCl2/MAO,在聚合前再将MgCl2/MAO与Et[Ind]2ZrCl2混合陈化,并立即在少量烷基铝活化下引发乙烯聚合[4],实验结果表明,该催化剂聚合活性高、聚合物的颗粒形态好、且不粘釜,是一种新型的载体催化剂.由于烷基铝的加入可使催化剂的活性大幅度提高,所以本文将烷基铝也称作助催化剂,来研究其对该载体催化剂催化乙烯聚合的影响.     

Preparation and characterization of lithium imidoalanate complexes Li(2)[(RN)(4)(AlH(2))(6)] (R = Me or (t)()Bu): first examples of aluminum-rich imidoalanes with an adamantoid structure

Whereas methylammonium chloride, [MeNH(3)]Cl, reacts with LiGaH(4) in an ether solution to give, according to the conditions, either the adduct MeH(2)N x GaH(3) or the cationic derivative [(MeH(2)N)(2)GaH(2)](+)Cl(-), the corresponding reaction of [MeNH(3)]Cl or [(t)BuNH(3)]Cl with LiAlH(4) proceeds mainly, with H(2) elimination, to the imidoalane Li(2)[(RN)(4)(AlH(2))(6)] (R = Me, 1, or (t)Bu, 2). The crystal structure of 1 x 2Et(2)O reveals, for the first time, anionic units with an adamantane-like Al(6)N(4) skeleton. The Li cations exist at two distinct sites, each linked via Li(mu-H)Al bridges to two [(MeN)(4)(AlH(2))(6)](2-) cages. Despite disordering of the tBu groups, the crystal structure of 2 evidently includes analogous anionic units. By contrast, the main product of the reaction between [(i)PrNH(3)]Cl and LiAlH(4) under similar conditions is the known neutral, hexameric imidoalane [(i)PrNAlH](6), 3, the crystal structure of which has been redetermined.     

Probing the aromaticity of the [(H(t)Ac)3(μ2-H)6], [(H(t)Th)3(μ2-H)6],(+), and [(H(t)Pa)3(μ2-H)6] clusters

In this study we report about the aromaticity of the prototypical [(H(t)Ac)(3)(μ(2)-H)(6)], [(H(t)Th)(3)(μ(2)-H)(6)](+), and [(H(t)Pa)(3)(μ(2)-H)(6)] clusters via two magnetic criteria: nucleus-independent chemical shifts (NICS) and the magnetically induced current density. All-electron density functional theory calculations were carried out using the two-component zeroth-order regular approach and the four-component Dirac-Coulomb Hamiltonian, including scalar and spin-orbit relativistic effects. Four-component current density maps and the integration of induced ring-current susceptibilities clearly show that the clusters [(H(t)Ac)(3)(μ(2)-H)(6)] and [(H(t)Th)(3)(μ(2)-H)(6)](+) are non-aromatic whereas [(H(t)Pa)(3)(μ(2)-H)(6)] is anti-aromatic. However, for the thorium cluster we find a discrepancy between the current density plots and the classification through the NICS index. Our results also demonstrate the increasing influence of f orbitals, on bonding and magnetic properties, with increasing atomic number in these clusters. We think that the enhanced electron mobility in [(H(t)Pa)(3)(μ(2)-H)(6)] is due the significant 5f character of its valence shell. Also the participation of f orbitals in bonding is the reason why the protactinium cluster has the shortest bond lengths of the three clusters. This study provides another example showing that the magnetically induced current density approach can give more reliable results than the NICS index.     

Univalent gallium and indium phosphane complexes: from pyramidal M(PPh3)3(+) to carbene-analogous bent M(PtBu3)2(+) (M=Ga, In) complexes

In a new oxidative route, Ag(+)[Al(OR(F))(4)](-) (R(F)=C(CF(3))(3)) and metallic indium were sonicated in aromatic solvents, such as fluorobenzene (PhF), to give a precipitate of silver metal and highly soluble [In(PhF)(n)](+) salts (n=2, 3) with the weakly coordinating [Al(OR(F))(4)](-) anion in quantitative yield. The In(+) salt and the known analogous Ga(+)[Al(OR(F))(4)](-) were used to synthesize a series of homoleptic PR(3) phosphane complexes [M(PR(3))(n)](+), that is, the weakly PPh(3)-bridged [(Ph(3)P)(3)In-(PPh(3))-In(PPh(3))(3)](2+) that essentially contains two independent [In(PPh(3))(3)](+) cations or, with increasing bulk of the phosphane, the carbene-analogous [M(PtBu(3))(2)](+) (M=Ga, In) cations. The M(I)-P distances are 27 to 29 pm longer for indium, and thus considerably longer than the difference between their tabulated radii (18 pm). The structure, formation, and frontier orbitals of these complexes were investigated by calculations at the BP86/SV(P), B3LYP/def2-TZVPP, MP2/def2-TZVPP, and SCS-MP2/def2-TZVPP levels.     

Synthesis and group 4 complexes of tris(pyrrolyl-alpha-methyl)amine

The tetradentate, trianionic ligand tris(pyrrolyl-alpha-methyl)amine (H(3)tpa) is available in 84% yield in a single step by a triple Mannich reaction involving 3 equiv of pyrrole, 3 equiv of formaldehyde, and ammonium chloride. The new ligand is readily placed on titanium by transamination on Ti(NMe(2))(4), which generates Ti(NMe(2))(tpa) (1) in 73% yield. Treating 1 with 1 equiv of 1,3-dimethyl-2-iminoimidazolidine (H-imd) in toluene provided a rare example of a titanium 2-iminoimidazolidinide, which displays some interesting structural features. Of note is the Ti-N(imd) distance of 1.768(2) A, a typical Ti-N double to triple bond distance. Reaction of Zr(NMe(2))(4) with H(3)tpa gave a complex of variable composition, probably varying in the amount of labile dimethylamine retained. However, stable discreet compounds were available by addition of THF, pyridine, or 4,4'-di-tert-butyl-2,2'-bipyridine (Bu(t)bpy) to in situ generated Zr(NMe(2))(NHMe(2))(x)(tpa). Three chloro zirconium complexes were generated using three different strategies. Treating Zr(tpa)(NMe(2))(Bu(t)bpy) (5) with ClSiMe(3) afforded Zr(tpa)(Cl)(Bu(t)bpy) (6) in 92% yield. Reaction of Li(3)tpa with ZrCl(4)(THF)(2) in THF gave a 72% yield of ZrCl(tpa)(THF)(2) (7). In addition, treatment of ZrCl(NMe(2))(3) with H(3)tpa cleanly generated ZrCl(NHMe(2))(2)(tpa) (8) in 95% yield. An organometallic zirconium complex was generated on treatment of 6 with LiCtbd1;CPh; alkynyl Zr(Ctbd1;CPh)(tpa)(Bu(t)bpy) (9) was isolated in 62% yield. 1, Ti(imd)(tpa) (2), 6, and 9 were characterized by X-ray diffraction.     

Intermolecular hydroacylation: high activity rhodium catalysts containing small-bite-angle diphosphine ligands

Readily prepared and bench-stable rhodium complexes containing methylene bridged diphosphine ligands, viz. [Rh(C(6)H(5)F)(R(2)PCH(2)PR'(2))][BAr(F)(4)] (R, R' = (t)Bu or Cy; Ar(F) = C(6)H(3)-3,5-(CF(3))(2)), are shown to be practical and very efficient precatalysts for the intermolecular hydroacylation of a wide variety of unactivated alkenes and alkynes with β-S-substituted aldehydes. Intermediate acyl hydride complexes [Rh((t)Bu(2)PCH(2)P(t)Bu(2))H{κ(2)(S,C)-SMe(C(6)H(4)CO)}(L)](+) (L = acetone, MeCN, [NCCH(2)BF(3)](-)) and the decarbonylation product [Rh((t)Bu(2)PCH(2)P(t)Bu(2))(CO)(SMePh)](+) have been characterized in solution and by X-ray crystallography from stoichiometric reactions employing 2-(methylthio)benzaldehdye. Analogous complexes with the phosphine 2-(diphenylphosphino)benzaldehyde are also reported. Studies indicate that through judicious choice of solvent and catalyst/substrate concentration, both decarbonylation and productive hydroacylation can be tuned to such an extent that very low catalyst loadings (0.1 mol %) and turnover frequencies of greater than 300 h(-1) can be achieved. The mechanism of catalysis has been further probed by KIE and deuterium labeling experiments. Combined with the stoichiometric studies, a mechanism is proposed in which both oxidative addition of the aldehyde to give an acyl hydride and insertion of the hydride into the alkene are reversible, with the latter occurring to give both linear and branched alkyl intermediates, although reductive elimination for the linear isomer is suggested to have a considerably lower barrier.     

Syntheses, structures, and reactivities of homometallic rare-earth-metal multimethyl methylidene and oxo complexes

Unsolvated, trinuclear, homometallic, rare-earth-metal multimethyl methylidene complexes [{(NCN)Ln(μ(2)-CH(3))}(3)(μ(3)-CH(3))(μ(3)-CH(2))] (NCN = L = [PhC{NC(6)H(4)(iPr-2,6)(2)}(2)](-); Ln = Sc (2a), Lu (2b)) have been synthesized by treatment of [(L)Ln{CH(2)C(6)H(4)N(CH(3))(2)-o}(2)] (Ln = Sc (1a), Lu (1b)) with two equivalents of AlMe(3) in toluene at ambient temperature in good yields. Treatment of 1 with three equivalents of AlMe(3) gives the heterometallic trinuclear complexes [(L)Ln(AlMe(4))(2)] (Ln = Sc (3a), Lu (3b)) in good yields. Interestingly, 2 can also be generated by recrystallization of 3 in THF/toluene, thereby indicating that the THF molecule can also induce C-H bond activation of 2. Reaction of 2 with one equivalent of ketones affords the trinuclear homometallic oxo-trimethyl complexes [{(L)Ln(μ(2) -CH(3))}(3) (μ(3)-CH(3))(μ(3)-O)] (Ln = Sc(4a), Lu(4b)) in high yields. Complex 4b reacts with one equivalent of cyclohexanone to give the methyl abstraction product [{(L)Lu(μ(2) -CH(3) )}(3) (μ(3) -OC(6)H(9))(μ(3)-O)] (5b), whereas reaction of 4b with acetophenone forms the insertion product [{(L)Lu(μ(2)-CH(3))}(3){μ(3)-OCPh(CH(3))(2)}(μ(3)-O)] (6b). Complex 4a is inert to ketone under the same conditions. All these new complexes have been characterized by elemental analysis, NMR spectroscopy, and confirmed by X-ray diffraction determination.     

Nitrogen fixation to cyanide at a molybdenum center

Facile methoxymethylation of N(2)-derived nitride NMo(N[(t)Bu]Ar)(3) provided the imido cation [MeOCH(2)NMo(N[(t)Bu]Ar)(3)](+) as its triflate salt in 88% yield. Treatment of the latter with LiN(SiMe(3))(2) provided blue methoxyketimide complex MeO(H)CNMo(N[(t)Bu]Ar)(3) in 95% yield. Conversion of the latter to the terminal cyanide complex NCMo(N[(t)Bu]Ar)(3), which was the subject of a single-crystal X-ray diffraction study, was accomplished in 51% yield upon treatment with a combination of SnCl(2) and Me(2)NSiMe(3).     

Half-sandwich bis(tetramethylaluminate) complexes of the rare-earth metals: synthesis, structural chemistry, and performance in isoprene polymerization

The protonolysis reaction of [Ln(AlMe(4))(3)] with various substituted cyclopentadienyl derivatives HCp(R) gives access to a series of half-sandwich complexes [Ln(AlMe(4))(2)(Cp(R))]. Whereas bis(tetramethylaluminate) complexes with [1,3-(Me(3)Si)(2)C(5)H(3)] and [C(5)Me(4)SiMe(3)] ancillary ligands form easily at ambient temperature for the entire Ln(III) cation size range (Ln=Lu, Y, Sm, Nd, La), exchange with the less reactive [1,2,4-(Me(3)C)(3)C(5)H(3)] was only obtained at elevated temperatures and for the larger metal centers Sm, Nd, and La. X-ray structure analyses of seven representative complexes of the type [Ln(AlMe(4))(2)(Cp(R))] reveal a similar distinct [AlMe(4)] coordination (one eta(2), one bent eta(2)). Treatment with Me(2)AlCl leads to [AlMe(4)] --> [Cl] exchange and, depending on the Al/Ln ratio and the Cp(R) ligand, varying amounts of partially and fully exchanged products [{Ln(AlMe(4))(mu-Cl)(Cp(R))}(2)] and [{Ln(mu-Cl)(2)(Cp(R))}(n)], respectively, have been identified. Complexes [{Y(AlMe(4))(mu-Cl)(C(5)Me(4)SiMe(3))}(2)] and [{Nd(AlMe(4))(mu-Cl){1,2,4-(Me(3)C)(3)C(5)H(2)}}(2)] have been characterized by X-ray structure analysis. All of the chlorinated half-sandwich complexes are inactive in isoprene polymerization. However, activation of the complexes [Ln(AlMe(4))(2)(Cp(R))] with boron-containing cocatalysts, such as [Ph(3)C][B(C(6)F(5))(4)], [PhNMe(2)H][B(C(6)F(5))(4)], or B(C(6)F(5))(3), produces initiators for the fabrication of trans-1,4-polyisoprene. The choice of rare-earth metal cation size, Cp(R) ancillary ligand, and type of boron cocatalyst crucially affects the polymerization performance, including activity, catalyst efficiency, living character, and polymer stereoregularity. The highest stereoselectivities were observed for the precatalyst/cocatalyst systems [La(AlMe(4))(2)(C(5)Me(4)SiMe(3))]/B(C(6)F(5))(3) (trans-1,4 content: 95.6 %, M(w)/M(n)=1.26) and [La(AlMe(4))(2)(C(5)Me(5))]/B(C(6)F(5))(3) (trans-1,4 content: 99.5 %, M(w)/M(n)=1.18).     

Synthesis and structures of aluminum and magnesium complexes of tetraimidophosphates and trisamidothiophosphates: EPR and DFT investigations of the persistent neutral radicals {Me2Al[(mu-NR)(mu-NtBu)P(mu-NtBu)2]Li(THF)2}(*) (R = SiMe3, tBu)

Reactions of (RNH)(3)PNSiMe(3) (3a, R = (t)()Bu; 3b, R = Cy) with trimethylaluminum result in the formation of {Me(2)Al(mu-N(t)Bu)(mu-NSiMe(3))P(NH(t)()Bu)(2)]} (4) and the dimeric trisimidometaphosphate {Me(2)Al[(mu-NCy)(mu-NSiMe(3))P(mu-NCy)(2)P(mu-NCy)(mu-NSiMe(3))]AlMe(2)} (5a), respectively. The reaction of SP(NH(t)Bu)(3) (2a) with 1 or 2 equiv of AlMe(3) yields {Me(2)Al[(mu-S)(mu-N(t)Bu)P(NH(t)()Bu)(2)]} (7) and {Me(2)Al[(mu-S)(mu-N(t)()Bu)P(mu-NH(t)Bu)(mu-N(t)Bu)]AlMe(2)} (8), respectively. Metalation of 4 with (n)()BuLi produces the heterobimetallic species {Me(2)Al[(mu-N(t)Bu)(mu-NSiMe(3))P(mu-NH(t)()Bu)(mu-N(t)()Bu)]Li(THF)(2)} (9a) and {[Me(2)Al][Li](2)[P(N(t)Bu)(3)(NSiMe(3))]} (10) sequentially; in THF solutions, solvation of 10 yields an ion pair containing a spirocyclic tetraimidophosphate monoanion. Similarly, the reaction of ((t)BuNH)(3)PN(t)()Bu with AlMe(3) followed by 2 equiv of (n)BuLi generates {Me(2)Al[(mu-N(t)Bu)(2)P(mu(2)-N(t)Bu)(2)(mu(2)-THF)[Li(THF)](2)} (11a). Stoichiometric oxidations of 10 and 11a with iodine yield the neutral spirocyclic radicals {Me(2)Al[(mu-NR)(mu-N(t)Bu)P(mu-N(t)Bu)(2)]Li(THF)(2)}(*) (13a, R = SiMe(3); 14a, R = (t)Bu), which have been characterized by electron paramagnetic resonance spectroscopy. Density functional theory calculations confirm the retention of the spirocyclic structure and indicate that the spin density in these radicals is concentrated on the nitrogen atoms of the PN(2)Li ring. When 3a or 3b is treated with 0.5 equiv of dibutylmagnesium, the complexes {Mg[(mu-N(t)()Bu)(mu-NH(t)()Bu)P(NH(t)Bu)(NSiMe(3))](2)} (15) and {Mg[(mu-NCy)(mu-NSiMe(3))P(NHCy)(2)](2)} (16) are obtained, respectively. The addition of 0.5 equiv of MgBu(2) to 2a results in the formation of {Mg[(mu-S)(mu-N(t)()Bu)P(NH(t)Bu)(2)](2)} (17), which produces the hexameric species {[MgOH][(mu-S)(mu-N(t)()Bu)P(NH(t)Bu)(2)]}(6) (18) upon hydrolysis. Compounds 4, 5a, 7-11a, and 15-17 have been characterized by multinuclear ((1)H, (13)C, and (31)P) NMR spectroscopy and, in the case of 5a, 9a.2THF, 11a, and 18, by X-ray crystallography.     

A cubic, 12-connected, microporous metal-organometallic phosphate framework sustained by truncated tetrahedral nodes

A rare example of a microporous metal-organic phosphate, [Co(12)(L)(6)(μ(3)-PO(4))(4)(μ(3)-F)(4)(μ-H(2)O)(6)][NO(3)](2) (1), is synthesized by the reaction of a [(η(5)-C(5)H(5))Fe(II)](+)-functionalized terephthalate ligand with Co(NO(3))(2)·6H(2)O and phosphate and fluoride ions generated from the in situ hydrolysis of hexafluorophosphate. 1 is a cubic, 12-connected, face-centered cubic framework sustained by the linear connection of unprecedented, dodecanuclear truncated tetrahedral coordination clusters.     

Ln(III) methyl and methylidene complexes stabilized by a bulky hydrotris(pyrazolyl)borate ligand

The reaction of Ln(AlMe(4))(3) with bulky hydrotris(pyrazolyl)borate (Tp(t)(Bu,Me))H proceeds via a sequence of methane elimination and C-H bond activation, affording unprecedented rare-earth metal ligand moieties including Ln(Me)[(micro-Me)AlMe(3)] and X-ray structurally characterized "Tebbe-like" Ln[(micro-CH(2))(2)AlMe(2)].     

Reaction of vinyl chloride with group 4 metal olefin polymerization catalysts

The reactions of three types of group 4 metal olefin polymerization catalysts, (C(5)R(5))(2)ZrX(2)/activator, (C(5)Me(5))TiX(3)/MAO (MAO = methylalumoxane), and (C(5)Me(4)SiMe(2)N(t)Bu)MX(2)/activator (M = Ti, Zr), with vinyl chloride (VC) and VC/propylene mixtures have been investigated. Two general pathways are observed: (i) radical polymerization of VC initiated by radicals derived from the catalyst and (ii) net 1,2 VC insertion into L(n)MR(+) species followed by beta-Cl elimination. rac-(EBI)ZrMe(mu-Me)B(C(6)F(5))(3) (EBI = 1,2-ethylenebis(indenyl)) reacts with 2 equiv of VC to yield oligopropylene, rac-(EBI)ZrCl(2), and B(C(6)F(5))(3). This reaction proceeds by net 1,2 VC insertion into rac-(EBI)ZrMe(+) followed by fast beta-Cl elimination to yield [rac-(EBI)ZrCl][MeB(C(6)F(5))(3)] and propylene. Methylation of rac-(EBI)ZrCl(+) by MeB(C(6)F(5))(3)(-) enables a second VC insertion/beta-Cl elimination to occur. The evolved propylene is oligomerized by rac-(EBI)ZrR(+) as it is formed. At high Al/Zr ratios, rac-(EBI)ZrMe(2)/MAO catalytically converts VC to oligopropylene by 1,2 VC insertion into rac-(EBI)ZrMe(+), beta-Cl elimination, and realkylation of rac-(EBI)ZrCl(+) by MAO; this process is stoichiometric in Al-Me groups. The evolved propylene is oligomerized by rac-(EBI)ZrR(+). Oligopropylene end group analysis shows that the predominant chain transfer mechanism is VC insertion/beta-Cl elimination/realkylation. In the presence of trace levels of O(2), rac-(EBI)ZrMe(2)/MAO polymerizes VC to poly(vinyl chloride) (PVC) by a radical mechanism initiated by radicals generated by autoxidation of Zr-R and/or Al-R species. CpTiX(3)/MAO (Cp = C(5)Me(5); X = OMe, Cl) initiates radical polymerization of VC in CH(2)Cl(2) solvent at low Al/Ti ratios under anaerobic conditions; in this case, the source of initiating radicals is unknown. Radical VC polymerization can be identified by the presence of terminal and internal allylic chloride units and other "radical defects" in the PVC which arise from the characteristic chemistry of PCH(2)CHCl(*) macroradicals. However, this test must be used with caution, since the defect units can be consumed by postpolymerization reactions with MAO. (C(5)Me(4)SiMe(2)N(t)Bu)MMe(2)/[Ph(3)C]][B(C(6)F(5))(4)] catalysts (M = Ti, Zr) react with VC by net 1,2 insertion/beta-Cl elimination, yielding [(C(5)Me(4)SiMe(2)N(t)Bu)MCl][B(C(6)F(5))(4)] species which can be trapped as (C(5)Me(4)SiMe(2)N(t)Bu)MCl(2) by addition of a chloride source. The reaction of rac-(EBI)ZrMe(2)/MAO or [(C(5)Me(4)SiMe(2)N(t)Bu)ZrMe][B(C(6)F(5))(4)] with propylene/VC mixtures yields polypropylene containing both allylic and vinylidene unsaturated chain ends rather than strictly vinylidene chain ends, as observed in propylene homopolymerization. These results show that the VC insertion of L(n)M(CH(2)CHMe)(n)R(+) species is also followed by beta-Cl elimination, which terminates chain growth and precludes propylene/VC copolymerization. Termination of chain growth by beta-Cl elimination is the most significant obstacle to metal-catalyzed insertion polymerization/copolymerization of VC.     

Substituent size effects in lewis base induced reductions in organolanthanide chemistry

The reaction of the tripodal 1,3,5-trialkyl-1,3,5-triazacyclohexanes (L=cyclo-[N(R)CH(2)](3) , R=Et, iPr, tBu), with [Sm(AlMe(4))(3)] resulted in the formation of divalent samarium complexes of the constitution [{L(n)Sm(AlMe(4))(2)}(m)] (n, m=1,2) under ethane extrusion. These compounds were characterised by single-crystal X-ray diffraction and elemental analyses. Simultaneous occurrence of Lewis base induced reduction and C--activation reactions is observed. The ratio of products depends on the bulkiness of the N-alkyl substituent R. The reaction of [Sm(AlMe(4))(3)] with 1,3,5-triisopropyl-1,3,5-triazacyclohexane (TiPTAC) in benzene afforded the inversion-symmetric dimer [{(TiPTAC)(η(3)-AlMe(4))Sm}(2)(μ(2)-AlMe(4))(2)], whereas in toluene the pseudo-samarocene [(TiPTAC)(2)Sm(η(1)-AlMe(4))(2)] was obtained. The trisaluminate [(TiPTAC)Sm{(μ(2)-Me)(Me(2) l)}(2)(μ(3)-CH(2))(2)AlMe(2))] was found to be the C--activation product. In the case of the particular bulky 1,3,5-tri-tert-butyl-1,3,5-triazacyclohexane (TtBuTAC), the reaction led to the formation of the dimeric [{(TtBuTAC)(η(3)-AlMe(4))Sm}(2)(μ(2)-AlMe(4))(2)] even in toluene in comparably high yields. The decrease of the steric demand to ethyl groups in 1,3,5-triethyl-1,3,5-triazacyclohexane (TETAC) afforded the samarocene-like [(TETAC)(2) Sm(η(1)-AlMe(4))(2)] in lower yields. The resulting divalent samarium compounds are found to be stable with respect to reagents like dinitrogen, conjugated olefins and polycyclic aromatic systems.     

Molybdenocene trihydride complexes: influence of a [Me2Si] ansa bridge on classical versus nonclassical nature, stability with respect to elimination of dihydrogen, and acidity

Experimental and computational studies on a series of cationic molybdenocene trihydride complexes, namely [Cp(2)MoH(3)]+, [(Cp(Bu)t)(2)MoH(3)]+, [Cp(2)MoH(3)]+, and ([Me(2)Si(C(5)Me(4))(2)]MoH(3))+, demonstrate that the most stable form for the ansa molybdenocene derivative is a nonclassical dihydrogen-hydride isomer, ([Me(2)Si(C(5)Me(4))(2)]Mo(eta(2)-H(2))(H))+, whereas the stable forms for the non-ansa complexes are classical trihydrides, [Cp(2)Mo(H)(3)]+, [(Cp(Bu)t)(2)Mo(H)(3)]+, and [Cp(2)Mo(H)(3)]+. In addition to altering the classical versus nonclassical nature of [Cp(2)MoH(3)]+ and ([Me(2)Si(C(5)Me(4))(2)]Mo(eta(2)-H(2))(H))+, the [Me(2)Si] ansa bridge also markedly influences the stability of the complex with respect to elimination of H(2) and dissociation of H+. Finally, computational studies on ([H(2)Si(C(5)H(4))(2)]MoH(2)D)+ and ([H(2)Si(C(5)H(4))(2)]MoHD(2))+ establish that deuterium exhibits a greater preference than hydrogen to occupy dihydrogen versus hydride sites.     

Application of molybdenum bis(imido) complexes in ethylene dimerisation catalysis

In combination with EtAlCl(2) (Mo : Al = 1 : 15) the imido complexes [MoCl(2)(NR)(NR')(dme)] (R = R' = 2,6-Pr(i)(2)-C(6)H(3) (1); R = 2,6-Pr(i)(2)-C(6)H(3), R' = Bu(t) (3); R = R' = Bu(t) (4); dme = 1,2-dimethoxyethane) and [Mo(NHBu(t))(2)(NR)(2)] (R = 2,6-Pr(i)(2)-C(6)H(3) (5); R = Bu(t) (6)) each show moderate TON, activity, and selectivity for the catalytic dimerisation of ethylene, which is influenced by the nature of the imido substituents. In contrast, the productivity of [MoCl(2)(NPh)(2)(dme)] (2) is low and polymerisation is favoured over dimerisation. Catalysis initiated by complexes 1-4 in combination with MeAlCl(2) (Mo : Al = 1 : 15) exhibits a significantly lower productivity. Reaction of complex 5 with EtAlCl(2) (2 equiv.) gives rise to a mixture of products, while addition of MeAlCl(2) affords [MoMe(2)(N-2,6-Pr(i)(2)-C(6)H(3))(2)]. Treatment of 6 with RAlCl(2) (2 equiv.) (R = Me, Et) yields [Mo({μ-N-Bu(t)}AlCl(2))(2)] (7) in both cases. Imido derivatives 1 and 3 react with Me(3)Al and MeAlCl(2) to form the bimetallic complexes [MoMe(2)(N{R}AlMe(2){μ-Cl})(NR')] (R = R' = 2,6-Pr(i)(2)-C(6)H(3) (8); R = 2,6-Pr(i)(2)-C(6)H(3), R' = Bu(t) (10)) and [MoMe(2)(N{R}AlCl(2){μ-Cl})(NR')] (R = R' = 2,6-Pr(i)(2)-C(6)H(3) (9); R = 2,6-Pr(i)(2)-C(6)H(3), R' = Bu(t) (11)), respectively. Exposure of complex 8 to five equivalents of thf or PMe(3) affords the adducts [MoMe(2)(N-2,6-Pr(i)(2)-C(6)H(3))(2)(L)] (L = thf (12); L = PMe(3) (13)), while reaction with NEt(3) (5 equiv.) yields [MoMe(2)(N-2,6-Pr(i)(2)-C(6)H(3))(2)]. The molecular structures of complexes 5, 9 and 11 have been determined.