CO preoxidation on Ru-modified Pt(111)

Electrochemical scanning tunneling microscopy was used to study the structural evolution of adsorbed CO during preoxidation on Pt(111) modified with spontaneously deposited Ru. During the preoxidation process, a phase transition was observed from (2 × 2)-3CO-α to (√19 × √19)R23.4°-13CO via the transient structures (2 × 2)-3CO-β and (1 × 1)-CO. A comparison of these structural changes with those that occur on unmodified Pt(111) revealed that the presence of Ru resulted in higher populations of transient structures at lower potentials and a cathodic shift in the potential at which preoxidation is complete. These observations are discussed in terms of increased mobility of adsorbed CO in the presence of Ru.     

Electrochemical scanning tunneling microscopic observation of the preoxidation process of CO on Pt(111) electrode surface

Presented are sequential images of CO on Pt(111), observed with electrochemical scanning tunneling microscopy, during its electrochemical preoxidation process. In the course of the well-known phase transition from the (2 x 2)-3CO-alpha structure to the (radical 19 x radical 19)R23.4 degrees-13CO structure, various structures were observed: (2 x 2)-3CO-beta (Chem. Comm. 2006, 2191-2193), (1 x 1)-CO, and (radical 13 x radical 13)R46.1 degrees-9CO. Based on an analysis of the populations of the structures averaged over imaging time and imaged location at the preoxidation potential range (0-0.25 V vs Ag/AgCl), the structures of CO domains changed sequentially in the order of (2 x 2)-3CO-alpha, (2 x 2)-3CO-beta, (1 x 1)-CO, (radical 13 x radical 13)R46.1 degrees-9CO, and (radical 19 x radical 19)R23.4 degrees-13CO as the potential shifted from 0 to 0.25 V. Such a sequential structural change demonstrates that the structures of (2 x 2)-3CO-beta, (1 x 1)-CO, and (radical 13 x radical 13)R46.1 degrees-9CO are transient ones during the preoxidation of CO on Pt(111). Discussed are the transient structures in terms of various aspects, such as the absence of CO in solution and the origin of compressed structures.     

Molecular orientations and interfacial structure of C60 on Pt(111)

Molecular orientations and assembled structures of C(60) molecules on Pt(111) have been characterized by low-temperature scanning tunneling microscopy for coverage between 0.1 ML and 1.5 ML. At room temperature, C(60) molecules preferentially decorate the steps and nucleate into single layer islands (SLIs) with hexagonal close-packed structures upon increasing coverage. C(60) islands comprise two differently oriented C(60)∕Pt(111)-(√13?×?√13) R13.9° phases, in which five types of molecular orientation of C(60) carbon cage configurations are clearly identified by the high-resolution scanning tunneling microscopy image. Further annealing treatment leads to more uniform molecular orientation without apparent aggregation of C(60) SLIs. As coverage increases above 1 ML, domains corresponding to (2√3?×?2√3) R30° superstructure appear. To explain the above transformation, an interfacial reconstruction model is proposed according to the detailed study of the molecular adsorption structures in different domains.     

Molecular orientation and lattice ordering of C60 molecules on the polar FeO/Pt(111) surface

C(60) molecules assemble into close packing layer under the domination of the intermolecular interaction when deposited onto Pt(111)-supported FeO layer kept at 400 K. From corresponding high resolution scanning tunneling microscopy (STM) image, a kind of C(60) molecular orientational ordering stabilized by the intermolecular interaction is revealed as C(60)/FeO(111)-(√133 × √133) R17.5° structure and determined from the commensurability between the C(60) nearest-neighbor distance and the lattice of the underlying oxygen layer. Moreover, due to the inhomogeneously distributed work function of the underlying FeO layer, the C(60) molecular electronic state is periodically modulated resulting in a bright-dim STM contrast. In addition, one coincidence lattice ordering is determined as 8 × 8 superstructure with respect to the C(60) primitive cell, which overlays a 3 × 3 moiré cell of the underlying FeO layer.     

Characterization and methanol electrooxidation studies of Pt(111)/Os surfaces prepared by spontaneous deposition

Catalytic activity of the Pt(111)/Os surface toward methanol electrooxidation was optimized by exploring a wide range of Os coverage. Various methods of surface analyses were used, including electroanalytical, STM, and XPS methods. The Pt(111) surface was decorated with nanosized Os islands by spontaneous deposition, and the Os coverage was controlled by changing the exposure time to the Os-containing electrolyte. The structure of Os deposits on Pt(111) was characterized and quantified by in situ STM and stripping voltammetry. We found that the optimal Os surface coverage of Pt(111) for methanol electrooxidation was 0.7 +/- 0.1 ML, close to 1.0 +/- 0.1 Os packing density. Apparently, the high osmium coverage Pt(111)/Os surface provides more of the necessary oxygen-containing species (e.g., Os-OH) for effective methanol electrooxidation than the Pt(111)/Os surfaces with lower Os coverage (vs e.g., Ru-OH). Supporting evidence for this conjecture comes from the CO electrooxidation data, which show that the onset potential for CO stripping is lowered from 0.53 to 0.45 V when the Os coverage is increased from 0.2 to 0.7 ML. However, the activity of Pt(111)/Os for methanol electrooxidation decreases when the Os coverage is higher than 0.7 +/- 0.1 ML, indicating that Pt sites uncovered by Os are necessary for sustaining significant methanol oxidation rates. Furthermore, osmium is inactive for methanol electrooxidation when the platinum substrate is absent: Os deposits on Au(111), a bulk Os ingot, and thick films of electrodeposited Os on Pt(111), all compare poorly to Pt(111)/Os. We conclude that a bifunctional mechanism applies to the methanol electrooxidation similarly to Pt(111)/Ru, although with fewer available Pt sites. Finally, the potential window for methanol electrooxidation on Pt(111)/Os was observed to shift positively versus Pt(111)/Ru. Because of the difference in the Os and Ru oxophilicity under electrochemical conditions, the Os deposit provides fewer oxygen-containing species, at least below 0.5 V vs RHE. Both higher coverage of Os than Ru and the higher potentials are required to provide a sufficient number of active oxygen-containing species for the effective removal of the site-blocking CO from the catalyst surface when the methanol electrooxidation process occurs.     

Electrodeposition of copper on a Pt(111) electrode in sulfuric acid containing poly(ethylene glycol) and chloride ions as probed by in situ STM

This study employed real-time in situ STM imaging to examine the adsorption of PEG molecules on Pt(111) modified by a monolayer of copper adatoms and the subsequent bulk Cu deposition in 1 M H(2)SO(4) + 1 mM CuSO(4)+ 1 mM KCl + 88 μM PEG. At the end of Cu underpotential deposition (~0.35 V vs Ag/AgCl), a highly ordered Pt(111)-(√3 × √7)-Cu + HSO(4)(-) structure was observed in 1 M H(2)SO(4) + 1 mM CuSO(4). This adlattice restructured upon the introduction of poly(ethylene glycol) (PEG, molecular weight 200) and chloride anions. At the onset potential for bulk Cu deposition (~0 V), a Pt(111)-(√3 × √3)R30°-Cu + Cl(-) structure was imaged with a tunneling current of 0.5 nA and a bias voltage of 100 mV. Lowering the tunneling current to 0.2 nA yielded a (4 × 4) structure, presumably because of adsorbed PEG200 molecules. The subsequent nucleation and deposition processes of Cu in solution containing PEG and Cl(-) were examined, revealing the nucleation of 2- to 3-nm-wide CuCl clusters on an atomically smooth Pt(111) surface at overpotentials of less than 50 mV. With larger overpotential (η > 150 mV), Cu deposition seemed to bypass the production of CuCl species, leading to layered Cu deposition, starting preferentially at step defects, followed by lateral growth to cover the entire Pt electrode surface. These processes were observed with both PEG200 and 4000, although the former tended to produce more CuCl nanoclusters. Raising [H(2)SO(4)] to 1 M substantiates the suppressing effect of PEG on Cu deposition. This STM study provided atomic- or molecular-level insight into the effect of PEG additives on the deposition of Cu.     

First-principles study on the reconstruction induced by the adsorption of C60 on Pt(111)

The adsorption of C60 on a Pt(111) surface and the origins of the √13 × √13R13.9° or 2√3 × 2√3R30° reconstruction of the C60/Pt(111) system have been investigated by means of first-principles calculations. In agreement with the experimental observations, our calculations reveal that the C60 molecule binds covalently on the Pt(111) surface. The C60 molecule adsorbs on the Pt(111) surface with the center of a hexagonal ring located on top of a surface Pt atom. The surface Pt atom can be removed easily, forming a Pt vacancy upon the adsorption of C60 molecule. Our calculation results show that the strong covalent bonds between C60 and the Pt(111) surface and the formation of adatom-vacancy pairs in the C60/Pt(111) system may be the main driving forces promoting the substrate reconstructing pattern observed in experiments.     

Interpretation of high-resolution images of the best-bound wetting layers on Pt(111)

Two interpretations have been proposed of dark triangles observed in scanning tunneling microscopy (STM) images of the best bound, √37×√37-R25.3°, and √39×√39-R16.1° periodic water monolayers on Pt(111). In one, a "Y"-shaped tetramer of water molecules is removed, leaving a vacancy island behind; the other assumes the Y is replaced by a hexagon of H(2)O molecules, amounting to a di-interstitial. Consistent only with the di-interstitial model are thermal desorption and CO coadsorption data, STM line scans, and total energies obtained from density functional theory calculations.     

Surface X-ray scattering of stepped surfaces of platinum in an electrochemical environment: Pt(331) = 3(111)-(111) and Pt(511) = 3(100)-(111)

Real surface structures of the high-index planes of Pt with three atomic rows of terraces (Pt(331) = 3(111)-(111) and Pt(511) = 3(100)-(111)) have been determined in 0.1 M HClO(4) at 0.1 and 0.5 V(RHE) with the use of surface X-ray scattering (SXS). The surfaces with two atomic rows of terraces, Pt(110) = 2(111)-(111) and Pt(311) = 2(100)-(111) = 2(111)-(100), are reconstructed to a (1 × 2) structure according to previous studies. However, the surfaces with three atomic rows of terraces have pseudo-(1 × 1) structures. The interlayer spacing between the first and the second layers, d(12), is expanded 13% on Pt(331) compared to that of the bulk, whereas it is contracted 37% on Pt(511). The surface structures do not depend on the applied potential on either surface.     

Examination of Pt(111)/Ru and Pt(111)/Os surfaces: STM imaging and methanol oxidation activity

Ruthenium and osmium were deposited in submonolayer amounts on Pt(111) single crystal surfaces using the previously reported ‘spontaneous deposition’ procedure [Chrzanowski et al., Langmuir, 13 (1997) 5974]. Such surfaces were first explored using ex situ scanning tunneling microscopy (STM) to image the deposition characteristics of ruthenium and osmium islands on Pt(111). It was found that, using the spontaneous deposition procedure, a maximum coverage of 0.20 ML ruthenium is formed on the surface after 120 s of exposure to a RuCl₃ solution in 0.1 M HClO₄. A homogeneous deposition on the Pt(111) surface was found, with no observed preferential deposition on step edges or surface defect sites. In contrast, in the spontaneous deposition of osmium, osmium clusters form preferentially at, though not limited to, surface defect sites and step edges. Osmium island deposition occurs at a greater rate than ruthenium on Pt(111), and possible explanations are presented. Methanol activity on the Pt(111)/Ru and Pt(111)/Os surfaces is also studied, using the coverage values determined to yield the highest activity for methanol electro-oxidation (0.20 ML coverage for Ru and 0.15 ML for Os). At potentials more negative than 0.40 V vs. RHE, the Pt(111)/Ru surface yields a higher surface activity than Pt(111)/Os. However, at potentials more positive than 0.04 V, Pt(111)/Os exhibits demonstrably higher surface activity. The relevance of this data is discussed and future avenues of interest are indicated.     

Binding energy of ruthenium submonolayers deposited on a Pt(111) electrode

We investigated the 3d_5/2 core-level binding energy of Ru in Ru nanoislands spontaneously deposited on a Pt(111) electrode [Pt(111)/Ru], and the binding energies of 3d_5/2 iodine and 1s CO adsorbed on Pt(111)/Ru by the use of X-ray photoelectron spectroscopy. Both iodine and CO were used as surface probes of the electronic properties of Pt(111)/Ru. Little difference was found in the binding energy of Ru in Pt(111)/Ru and in Ru(0001). However, the addition of Ru to Pt(111) induces major changes in the core-level binding energies of chemisorbed iodine and CO as referenced to those adsorbed on Ru(0001). We conclude that the iodine 3d_5/2 and CO 1s C core levels experience higher electronic charge on Pt(111)/Ru than on Ru(0001), suggesting a charge transfer from Pt to Ru, or to a Ru-I surface molecule within the deposit. The charge transfer from Pt to Ru is in agreement with the result of previous in situ electrochemical NMR investigations [P.K. Babu, H.S. Kim, A. Wieckowski, E. Oldfield (2003) J. Phys. Chem. B 107:7595] and confirms the general trend of reduction in the density of states of Pt due to alloying with Ru [J. McBreen, S. Mukerjee (1995) J. Electrochem. Soc. 142:3399]. Theoretical calculations are in progress to further interpret the origin of the binding-energy shifts observed in this study.Dedicated to Zbigniew Galus on the occasion of his 70th birthday     

In situ STM study of Au(111)/Os bimetallic surfaces: spontaneous deposition and electrochemical dissolution

We provide an electrochemical and structural characterization by in situ STM of Au(111)/Os electrodes prepared by spontaneous deposition of Os on Au(111). Surfaces with Os coverage values up to the saturation coverage were examined, from 10%. Using comparisons to previous work on Au(111)/Ru, Pt(111)/Ru, and Pt(111)/Os, we find that we may now generalize that Os deposits spontaneously faster than Ru and has a greater tendency to form 3-D structures. Additionally, the Au(111) substrate shows preferential step and near-step decoration in both cases, although it is less pronounced for Os than Ru. We also investigated the incremental dissolution of the Os from Au(111), to better understand electrochemical dissolution processes in general and to better control the Os deposit structure. The application of controlled electrochemical treatments (cyclic voltammetry up to increasingly positive values) significantly increased the dispersion of the Os deposit by generating smaller, more widely spaced islands. Upon voltammetry up to 0.75 V, the Au(111)/Os surface showed evidence of alloying and the formation of 3-D structures suggestive of strong Os-Os (oxidized) species interactions. The CO stripping results show the Au(111)/Os is not particularly effective for this reaction, but such results help to complete the overall picture of NM-NM catalytic combinations. Although the Au(111)/Os system itself is not catalytically active, the electrochemical manipulation of the deposit structure demonstrated here may be applied to other noble metal/noble metal (NM/NM) catalytic substrates to find optimal deposit morphologies.     

Adsorption and decomposition of cyclohexanone (C6H10O) on Pt(111) and the (2 × 2) and (√3 × √3)r30°-Sn/Pt(111) surface alloys

Adsorption and decomposition of cyclohexanone (C(6)H(10)O) on Pt(111) and on two ordered Pt-Sn surface alloys, (2 × 2)-Sn/Pt(111) and (√3 × √3)R30°-Sn/Pt(111), formed by vapor deposition of Sn on the Pt(111) single crystal surface were studied with TPD, HREELS, AES, LEED, and DFT calculations with vibrational analyses. Saturation coverage of C(6)H(10)O was found to be 0.25 ML, independent of the Sn surface concentration. The Pt(111) surface was reactive toward cyclohexanone, with the adsorption in the monolayer being about 70% irreversible. C(6)H(10)O decomposed to yield CO, H(2)O, H(2), and CH(4). Some C-O bond breaking occurred, yielding H(2)O and leaving some carbon on the surface after TPD. HREELS data showed that cyclohexanone decomposition in the monolayer began by 200 K. Intermediates from cyclohexanone decomposition were also relatively unstable on Pt(111), since coadsorbed CO and H were formed below 250 K. Surface Sn allowed for some cyclohexanone to adsorb reversibly. C(6)H(10)O dissociated on the (2 × 2) surface to form CO and H(2)O at low coverages, and methane and H(2) in smaller amounts than on Pt(111). Adsorption of cyclohexanone on (√3 × √3)R30°-Sn/Pt(111) at 90 K was mostly reversible. DFT calculations suggest that C(6)H(10)O adsorbs on Pt(111) in two configurations: by bonding weakly through oxygen to an atop Pt site and more strongly through simultaneously oxygen and carbon of the carbonyl to a bridged Pt-Pt site. In contrast, on alloy surfaces, C(6)H(10)O bonds preferentially to Sn. The presence of Sn, furthermore, is predicted to make the formation of the strongly bound C(6)H(10)O species bonding through O and C, which is a likely decomposition precursor, thermodynamically unfavorable. Alloying with Sn, thus, is shown to moderate adsorptive and reactive activity of Pt(111).     

Isotopic exchange of CO adsorbed on Pt(111)

The isotopic exchange of CO adsorbed on Pt(111) was studied using polarization modulation IR reflection absorption spectroscopy (PM-IRRAS) and temperature programmed desorption. It was found that the rate constants for the exchange reaction are much higher than would be expected from previous investigations of CO adsorbed on Pt nanoparticles. The adsorption of CO on Pt(111) under elevated pressures of CO and H(2) was also studied using PM-IRRAS. It was seen that CO pressures above 1 mbar lead to a shift in the absorption peak arising from CO adsorbed on a bridge site from 1850 to 1875 cm(-1). Exposing the CO-covered Pt(111) surface to 1000 mbar H(2) did not lead to any significant desorption of CO at room temperature, whereas at 363 K H(2) exposure did lead to a significant desorption of CO, due to the increased chemical potential of H(2). In a mixture of CO and H(2) with partial pressures of 0.01 mbar and 1000 mbar, respectively, no significant effect of H(2) on the PM-IRRAS spectrum was seen at temperatures below 423 K.     

金属-有机配合物分子在Au(111)表面的吸附行为

用STM对含氧桥的金属-有机配合物[Cu₂(μ-O)(dptap)4(NO₃)₂]分子在Au(111)表面的吸附行为进行了研究. STM结果表明, 该分子同时存在非解离吸附和解离吸附, 大部分分子在Au(111)面形成有规则的排列, 少量分子发生解离吸附, 并形成(√3×√3)R30°Cu原子吸附结构. 探讨了两种吸附现象共存的起因.     

Surface structure and phase transition of K adsorption on Au(111): by ab initio atomistic thermodynamics

We studied the interactions between atomic potassium (K) and Au(111) at a range of coverage (i.e., Θ(K) = 0.11-0.5 monolayer (ML)) by ab initio atomic thermodynamics. For K on-surface adsorption, we found that K energetically favors the three-fold hollow sites (fcc or hcp), while the most significant surface rumpling was obtained at the atop sites. The incorporation of gold atoms in the adsorbate layer gradually becomes energetically favorable with increasing K coverage. We proposed a possible model with a stoichiometry of K(2)Au for the (2 × 2)-0.5 ML phase observed in lower energy electron diffraction (LEED): one K at atop site and the other K as well as one Au adatom at the second-nearest fcc/hcp and hcp/fcc, respectively. Clear theoretical evidences were given for the ionic interaction of K on Au surface. Additionally, phase transitions were predicted based on chemical potential equilibrium of K, largely in line with the earlier reported LEED observations: the clean surface → (√3 × √3)R30° → (2 × 2), and (2 × 2) → (√3 × √3)R30° reversely at an elevated temperature.     

Pt（111）和Pt3Ni（111）表面上CO催化氧化反应的密度泛函理论研究

采用密度泛函理论,对Pt(111)和Pt3Ni(111)表面上CO和O的单独吸附、共吸附以及CO的氧化反应进行了系统的研究. 结果表明, Pt3Ni(111)表面上CO的吸附弱于Pt(111)表面, O的吸附明显强于Pt(111)表面. 两个表面表现出相似的CO催化氧化活性. 表面Ni的存在不但稳定了O的吸附,同时也降低了过渡态O的能量.     

CO在Pt(111)和Pt-M(111)(M=Ni,Mg)表面吸附的理论研究

采用密度泛函理论与周期性平板模型相结合的方法,对CO在Pt(111)表面top,fcc,hcp和bridge 4个吸附位和Pt-M(111)(M=Ni,Mg)表面h-top,M-top,Pt(M)Pt-bridge,Pt(M)M-bridge,Pt(Pt)M-bridge,M(Pt)M-bridge,Pt1M2-hcp...     

Structural phases formed by NO(2)∕CO co-adsorption on Au{111} surfaces

Exposing a Au{111} surface to NO(2) and then to CO at temperatures around 120 K in ultra-high vacuum gives rise to molecular overlayers in which the two species are co-adsorbed, which we have investigated using low-temperature scanning tunnelling microscopy. Under NO(2)-rich conditions, a (√7 × √7)R19.1° phase with 3:1 NO(2):CO stoichiometry forms. Under CO-rich conditions, this phase co-exists with other phases having 2:1 and 1:1 NO(2):CO stoichiometries and different symmetries, and with bare Au surface. Structural models for these phases are discussed. Individual domains of the (√7 × √7)R19.1° phase are chiral, by virtue of the arrangement of their achiral components, an observation that may have more general implications.     

Methanol oxidation on a Pt(111)-OH/O surface

The methanol oxidation on a hydroxylated Pt (Pt(111)-OH) surface has been investigated by means of infrared reflection absorption spectroscopy (IRAS) in ultra-high vacuum (UHV) and in acidic solution. The Pt(111)-OH surface in UHV was prepared by introducing water molecules on a Pt(111)-(2 x 2)-O surface and annealed at temperature higher than 160 K. Methanol was then, introduced to the Pt(111)-OH surface to show the dependence of the reaction intermediate on the annealing temperature. At an annealing temperature below 160 K, IR bands assignable to methanol overlayer were observed and no detectable intermediates, such as CO, formaldehyde and formate, were formed, suggesting that methanol molecules remain stable on Pt(111) surface without dissociation at this temperature region. At an annealing temperature above 160 K, on the other hand, CO and formate were observed. In addition, the oxidation of CO on Pt(111)-OH showed no sign of formate formation, indicating that formate is not derived from CO, but from a direct oxidation of methanol. Methanol oxidation was carried out in 0.1 mol dm(-3) HClO(4) solution on Pt(111) with a flow cell configuration and showed the formation of formate. These results indicate that the formate is the dominant non-CO intermediate both in UHV and in acidic solution, and the preadsorbed oxygen-containing species, in particular OH adsorbates, on Pt(111) surface plays a very important role in the formate formation process in methanol oxidation reaction.