Determination of manganese in some pyrolusite ores of Myanmar by neutron activation analysis

Manganese in pyrolusite ores from various regions of Myanmar was determined by thermal neutron activation analysis using an Am(Be) neutron source. The induced activities of⁵⁶Mn were monitored by a -counting technique.     

Synthesis,characterization, and fire retardancy of ferrocene containing polyphosphate esters

Polyphosphate esters containing ferrocene structures were synthesized from 1,1′-bis (p-hydroxyphenylamido) ferrocene and 1,1′-bis (p-hydroxyphenoxycarbonyl) ferrocene with aryl phosphorodichloridates by interfacial polycondensation using a phase transfer catalyst. The polymers were characterized by infrared, ¹H-, ¹³C-, and ³¹-NMR spectroscopy. The molecular weights were determined by end group analysis using ³¹P-NMR spectral data. The thermal stability and fire retardancy were respectively determined by thermogravimetry and limiting oxygen index (LOI) measurements. The polyamide-phosphate esters showed better thermal stability and higher LOI values than the polyester-phosphate esters.     

Monte Carlo simulation of PGNAA system for determining element content in the rock sample

The element content in rock sample can be determined by prompt gamma ray activation analysis technology. The neutron distributions under the conditions with different moderating materials, moderator size and distance from neutron source to lead-out hole were simulated using Monte Carlo method, and then the optimal structure parameters to get the highest thermal neutron flux was obtained. The PGNAA system with optimal parameters based on ²⁵²Cf neutron source was founded. In addition, the rock and element standard samples were irradiated by thermal neutron in this system. Moreover, the element content was calculated by processing gamma ray spectroscopy recorded, and it is in agreement with result of XRF method.     

Measurement of macroscopic and microscopic thermal neutron cross sections of V,Co, Cu,In, Dy and Au using neutron self-absorption properties

In this study, the total thermal neutron macroscopic and microscopic cross sections of V, Co, Cu, In, Dy and Au were measured using neutron self-absorption properties. Pure foils of these elements with various thicknesses were irradiated using a 5 Ci²³⁸Pu–Be source. After the irradiation, the gamma-spectra of their radionuclides were recorded by an HpGe detector. The gamma-photopeak areas of interest were determined by evaluating the gamma-spectra obtained from the foils. They were plotted as a function of foil thickness for each element. Then a non-linear least-squares fitting method was applied to the functions, and the total thermal neutron macroscopic and microscopic cross sections of V, Co, Cu, In, Dy and Au were obtained.     

Destructive and nondestructive analysis of some elements in tissue and environmental samples by thermal neutron activation analysis technique

A rapid and selective method has been developed and applied for determining elements present in tissue and environmental samples by both destructive and nondestructive activation analysis. Nondestructive activation analysis involves the irradiation of the sample and standard of the elements such as Mn, Na, and K with thermal neutrons from²⁵²Cf neutron source followed by radioassay of the (n,r) products on a HPGe detector coupled to a PC-based MCA. Elements are determined by irradiating the samples in the thermal neutron flux of the CIRUS reactor and radiochemically separating the isotopes of interest using substoichiometric extraction and precipitation technique. The statistical evaluation of the method with respect to accuracy and precision of the method and its sensitivity are discussed.     

Investigation of neutron sensitivity of un-doped and Dy-doped CaB<Subscript>4</Subscript>O<Subscript>7</Subscript> for thermoluminescence applications

In this study, thermoluminescence characteristics of un-doped and Dy-doped calcium tetraborate (CaB₄O₇) compounds are reported. The polycrystalline powder samples of un-doped and Dy-doped CaB₄O₇ were prepared by a solid-state reaction at high-temperature method. The identification and characteristics of the obtained compounds were determined by X-ray diffraction, Fourier transform infrared analysis, differential thermal analysis, thermogravimetric analysis, and scanning electron microscopy. The glow curves were obtained using a thermoluminescent reader. Neutron sensitivity, dose–response, and heating rate of CaB₄O₇ compounds were determined by using a bare ²⁵²Cf mixed neutron?+?gamma (n?+?γ) source, and dose response results are compared to those of Harshaw TLD-600 and TLD-700 neutron dosimeters (⁶LiF:Mg,Ti and ⁷LiF:Mg,Ti). The sensitivity of CaB₄O₇:Dy (0.5%) sample is approximately 4.35 and 3.36 times higher than that of TLD-600 and TLD-700, respectively.     

Synthesis characterizations and properties of a new fluoro-maleimide polymer

Novel 4-(4-trifluoromethyl)phenoxy N-phenyl-maleimide (FPMI) was synthesized. The free radical-initiated polymerization of FPMI was carried out in 1,4-dioxane solution using azobisisobutyronitrile as initiator. The monomer was investigated by FTIR, ¹H NMR, ¹³C NMR and elemental analysis, while the polymer was investigated by FTIR, ¹H NMR and ¹³C NMR. The effect of the monomer concentration, initiator concentration and temperature on the rate of polymerization (R_p) was studied. The activation energy of the polymerization was calculated (ΔE = 48.94 kJ/mol). The molecular weight of PFPMI and polydispersity index of the polymer were determined by gel permeation chromatography and were equal to 73,500, 16,700 and 2.27, respectively. The properties of PFPMI, including thermal behavior, thermal stability, the glass transition temperature (T_g = 236 °C), photo-stability, solubility and solution viscosity were studied.     

Novel methacrylate copolymers with fluorine containing: Synthesis, characterization, reactivity ratios, thermal properties and biological activity

New methacrylate based monomers 2-(4-benzoylphenoxy)-2-oxoethyl-2-methylacrylate (BOEMA), 2-(4-acetylphenoxy)-2-oxoethyl-2-methylacrylate (AOEMA), and 2-[(4-fluorophenyl)amino]-2-oxoethyl-2-methylacrylate (FPAMA), were synthesized first time. The free-radical-initiated copolymerization of AOEMA and BOEMA with FPAMA were carried out in 1,4-dioxane solution at 65 °C using 2,2′-azobisisobutyronitrile (AIBN) as an initiator with different monomer-to-monomer ratios in the feed. The monomers and copolymers were characterized by FTIR, ¹H NMR and ¹³C NMR spectral studies. The copolymer compositions were evaluated by nitrogen content in polymers. The reactivity ratios of the monomers were determined by the application of Fineman-Ross and Kelen-Tudos methods. The analysis of reactivity ratios revealed that BOEMA and AOEMA are less reactive than FPAMA, and copolymers formed are statistically in nature. The molecular weights ( and ) and polydispersity index of the polymers were determined using gel permeation chromatography. Thermogravimetric analysis of the polymers reveals that the thermal stability of the copolymers increases with an increase in the mole fraction of FPAMA in the copolymers. Glass transition temperatures of the copolymers were found to decrease with an increase in the mole fraction of FPAMA in the copolymers. The prepared homo and copolymers were tested for their antimicrobial activity against bacteria, fungi and yeast.     

The thermal properties of monochloro-para-xylylene

The three thermal properties that describe the heat transfer in a material were determined for a thin, tough, transparent, highly crystalline film of poly-monochloro-para-xylylene (PCPX). These three properties, viz. thermal conductivity (K), thermal diffusivity (α), and specific heat (C_p) were determined using a transient heating method.The experimental method used involved the heating of a sample of stacked polymer sheets by an ultrathin heating foil. The heating foil, located in the center plane of the stack provided a source of constant heat flux when a current of known amperage was passed through it. By careful consideration of sample dimensions, the sample simulated an infinite solid. The thermal properties were calculated using standard solutions of the heat transfer equations of an infinite solid over a temperature range of ?192 to 130°C. The experimental method was repeated to check the reproducibility of the results and compared with differential scanning calorimeter results.A data acquisition system was developed to facilitate data handling for the transient experiments. The system included hardware capable of punching data on paper tape and a software package to analyze these data.The conclusions drawn include: (1) the reproducibility of the experiments was well within the experimental errors; (2) the data acquisition system greatly facilitates acquisition of thermal data; (3) an incremental change occurs in C_p of PCPX in the vicinity of the γ relaxation reported by dynamical relaxation measurements and its occurrence indicates that this relaxation involves a cooperative motion of molecules; (4) owing to the significant magnitude of the C_p jump and the appreciable degree of crystallinity of PCPX, these internal motions occurring at the γ transition probably involve both amorphous and crystalline regions; (5) a direct relationship between thermal expansion and specific heat was indicated in PCPX as well as for polystyrene (PS) at relatively low temperatures (?200 to ?20°C); (6) the overall low values of thermal conductivity (1.0 to 2.5 × 10^?4 cal sec^?1 cm^?1) and thermal diffusivity (9.5 to 5.3 × 10^?4 cm² sec^?1) of PCPX indicate that it is ideally suited for insulation applications.     

Untreated and alkali treated fibers from Alfa stem: effect of alkali treatment on structural,morphological and thermal features

Alfa stems are rich in cellulose and they are an inexpensive, easily renewable source of natural fibers with the potential for polymer reinforcement. However, large amounts of non-cellulosic materials, surface impurities and low degradation temperature make natural fibers less attractive for reinforcement of polymeric materials, unless they can be modified in a proper way. In this paper, Alfa stems were treated with NaOH solution with two different concentrations (1 and 5 wt%). Raw and treated stems were crushed to obtain fibers. Stems and fibers were characterized by scanning electron microscopy (SEM) and optical microscopy, respectively. Their crystallinity index was determined by X-ray diffraction, thermal stability by thermogravimetry and structural change by FT-IR and ¹³C NMR spectroscopy. Comparison and analysis of results confirmed some thermal, structural and morphological changes of the fibers after treatment due to removal of some non-crystalline constituents from the plant. SEM showed rougher surfaces after alkalization. FT-IR and ¹³C NMR showed a gradual improvement in cellulose level by alkali treatment with increasing NaOH concentration. The crystallinity index and thermal stability of treated Alfa fibers were also found to be improved.     

Glycidyl methacrylate–tert-butyl acrylate copolymers: Synthesis,characterization, and thermal studies

Glycidyl methacrylate was copolymerized with tert-butyl acrylate in bulk at 60°C using benzoyl peroxide as free radical initiator. The copolymer composition was determined by chemical analysis as well as from ¹³C-NMR data. The monomer reactivity ratios were calculated by using the YBR method. The number average sequence length of the copolymers was determined from ¹³C-NMR data and compared with those obtained from reactivity ratios. The intrinsic viscosity of the copolymers was determined in DMF, and thermal stability as well as mechanism of thermal degradation of the copolymers were evaluated.     

Analysis of marine samples by neutron-induced prompt gamma-ray technique and ICP-MS

Multi-element and isotopic analyses of oils and marine environmental samples were carried out to estimate a contamination source using a "finger printing" method. Elemental analyses were carried out using neutron-induced prompt gamma-ray analysis (PGA), instrumental neutron activation analysis (INAA) at the Japan Atomic Energy Research Institute, Tokai-mura, Japan (JAERI) and ICP-MS in the IAEA Marine Environment Laboratory, Monaco (MEL). Fifteen elements including light elements, H, B, N, Si and Ca, which cannot be determined by INAA and ICP-MS, were determined by PGA. A total of 47 elements were determined in the present study. The potential of PGA for the determination of isotopic ratios was tested by measuring ³⁴S/³²S ratios in oils. The evaluation of historical records of marine environmental conditions using annual bands in coral samples was also investigated.     

Copolymers of 7-Methoxy-2-Acetyl Benzofuryl Methylmethacrylate With Styrene: Synthesis,Characterization, Reactivity Ratios and Determination of Kinetic Parameters With Thermogravimetric Analysis

The 7-methoxy-2-acetyl benzofuryl methylmethacrylate (MABMM) monomer was synthesized by reacting 7-methoxy-2-bromo acetyl benzofurane with sodium methacrylate in acetonitrile solvent at 70°C in the presence of triethylbenzylammoniumchloride (TEBAC). The monomer was characterized by FTIR, ¹H-and ¹³C-NMR spectral studies. Reactivity ratios for the copolymers 7-methoxy-2-acetyl benzofuryl methylmethacrylate (MABMM)-co- styrene (ST) are reported. Copolymers were prepared by free radical polymerization using 2,2′-azobisisobutyronitrile (AIBN) as an initiator at 70°C in 1,4-dioxane solution. FTIR, ¹H-and ¹³C-NMR spectral studies and gel permeation chromatography (GPC) were used the copolymer characterization. The monomer compositions in the copolymer were determined by elementel analyses and the reactivity ratios (ri) were calculated applying diverse linear methods, namely Finemann-Ross (FR) and Kelen-Tüdös (KT) and the nonlinear error invariable model method of a computer program RREVM. By using the latter pr°Cedure, the values of the reactivity ratios were estimated as 2.74 and 0.69 for the system MABMM (1) and ST (2), respectively. These values suggest the formation of nearly-alternating copolymers in the systems. Molecular weights were determined by gel permeation chromatography (GPC). The polydispersity indices of the polymers determined using suggest a strong tendency for chain termination by disproportionation. The glass transition temperature of the polymers were investigated by Shimadzu DSC-60 and the apparent thermal decomposition activation energies (E_d) were calculated by the Ozawa method using the Perkin-Elmer TGA thermobalance, respectively. Tg increases when the concentration of polar monomer (MABMM) in the copolymer increases. It was observed that thermal stabilities of copolymers increased with increasing of MABMM content in copolymers.     

The application of NAA with irradiation at reduced temperature for the study of element losses during pretreatment of biological samples

The neutron capture gamma-ray spectroscopy facility assembled at the Institute of Radiochemistry, KfK (for analytical purposes) using a²⁵²Cf neutron source with a strength of 6·10⁷ n/s, has been used to check its applicability and sensitivity for quantitative analyses of ores. The analysis of Sm, Cd and Mn in phosphate and monazite rock samples has been carried out. The results from this study show a variation of about 25% from the values determined by RNAA method. This discrepancy could be mainly due to the low signal-to-background ratio observed which is caused by (i) scattering of the source gammarays by the target, and (ii) interference from the 2223.1 keV neutron capture hydrogen gamma-rays produced by the moderated materials and from their compton scattering in the detector. To overcome these difficulties we suggest to introduce a 2.5 cm thick polyethylene sheet between the detector⁶Li-cap shielding and the target as well as to increase the detection solid angle. Also the strength of the²⁵²Cf neutron source should be increased by an order of magnitude and the neutron beam should be collimated to obtain the optimal thermal neutron flux with a low level of²⁵²Cf gamma-rays. This can be achieved by setting up between the neutron source and the target a conical polyethylene collimator with a thickness of 10 cm containing a 1 cm thick lead sheet.     

Synthesis of melamine based polymer complexes and their thermal degradations and magnetic properties

In this study, new polymer Fe(III) and Cr(III) complexes were synthesized. These polymer complexes were characterized by using elemental analysis, FT-IR spectroscopy, MS, thermal analyses and magnetic susceptibility measurement technics. Their thermal degradations were investigated, and co-polymerization was compared to aliphatic polymerization by using 1,2-dibromomethylbenzene and o-phenylenedialdehyde. Finally, metal ratios of the complexes were determined by using atomic absorption spectroscopy. The complexes are distorted octahedral low-spin (S = 1/2) Fe(III) and distorted octahedral (S = 3/2) Cr(III) bridged by COO^? and catechol groups.     

The linear thermal expansion and the thermal diffusivity measurements for near-stoichiometric (U, Ce)O2 solid solutions

The thermal diffusivities of near-stoichiometric (U, Ce)O₂ solid solutions containing CeO₂ up to 22 mol% were investigated in the temperature range of 298-1273 K using the laser flash method. Also, linear thermal expansion measurements were performed in the temperature range of 298-1673 K using a thermomechanical analysis. The thermal conductivities were determined by a calculation of the thermal diffusivity, the density and the specific heat. The thermal conductivities of the tested samples could be expressed as a function of the temperature by the phonon conduction equation k = (A + BT)⁻¹. The thermal conductivity decreased gradually with an increasing Ce content. This was attributable to the increasing lattice defect thermal resistance caused by the U⁴⁺, Ce⁴⁺ and O²⁻ ions as phonon scattering centers.     

Characterization of DMNB,a detection agent for explosives,by thermal analysis and solid state NMR

The thermal properties of 2,3-dimethyl-2,3-dinitrobutane (DMNB), a detection agent for explosives, have been determined by DSC measurements. Additionally, the results of an NMR study are compared with conclusions arrived at in the literature with regard to the source of two endotherms observed in the DSC. The thermal decomposition of DMNB is characterized by an exotherm with an energy in excess of 3 kJ g^?1, observed in conjunction with a third endotherm resulting from the fusion of DMNB. Arrhenius parameters determined from both variable heating rate and isothermal measurements in the DSC are compared with predicted values assuming various mechanisms for the decomposition process.     

Synthesis and thermal behavior of a new high-energy organic potassium salt

A new high-energy organic potassium salt, 1-amino-1-hydrazino-2,2-dinitroethylene potassium salt [K(AHDNE)], was synthesized by reacting of 1-amino-1-hydrazino-2,2-dinitroethylene (AHDNE) and potassium hydroxide in methanol aqueous solution. The thermal behavior of K(AHDNE) was studied using DSC and TG/DTG methods and can be divided into three obvious exothermic decomposition processes. The decomposition enthalpy, apparent activation energy and pre-exponential factor of the first decomposition process were ?2662.5?J?g^?1, 185.2?kJ?mol^?1 and 10^19.63 s^?1, respectively. The critical temperature of thermal explosion of K(AHDNE) is 171.38?°C. The specific heat capacity of K(AHDNE) was determined using a micro-DSC method, and the molar heat capacity is 208.57?J?mol^?1 K^?1 at 298.15?K. Adiabatic time-to-explosion of K(AHDNE) was also calculated. K(AHDNE) presents higher thermal stability than AHDNE.     

Studies on photocrosslinkable copolymers of 4-methacryloyloxyphenyl-3′,4′-dimethoxystyryl ketone and methyl methacrylate

Copolymers with various contents of 4-methacryloyloxyphenyl-3′,4′-dimethoxystyryl ketone (MPDSK) and methyl methacrylate (MMA) were prepared in methyl ethyl ketone solution using benzoyl peroxide as a free radical initiator at 70 °C. Characterization of the resulting polymers was done by UV, FT-IR, ¹H NMR and ¹³C NMR spectroscopic techniques. The copolymer compositions were determined by ¹H NMR analysis. The monomer reactivity ratios were calculated using linearisation methods such as Finemann-Ross (r₁ = 0.4283 and r₂ = 0.3050), Kelen-Tudos (r₁ = 0.4264 and r₂ = 0.2606), and extended Kelen-Tudos (r₁ = 0.4022 and r₂ = 0.2704) methods as well as by a non-linear error-in-variables model (EVM) method using the computer program RREVM (r₁ = 0.4066 and r₂ = 0.2802). The molecular weights ( and ) and the polydispersity index of the copolymers were determined by gel permeation chromatography. The thermal stability of the copolymers increases with increase in concentration of MPDSK. Glass transition temperatures were determined by differential scanning calorimeter under nitrogen atmosphere. The photoreactivity of the copolymers having pendant chalcone moieties was studied in chloroform solution.     

K 0-prompt gamma ray activation analysis for estimation of boron and cadmium in aqueous solutions

K ₀-PGAA (prompt gamma activation analysis) has been used to estimate boron and cadmium contents in industrial and environmental materials from some different local areas as well as, samples from different locations in Burullus and Qarun Lakes. A high efficiency Compton background suppression gamma-ray spectrometry by anti-coincidence counting with a NaI(Tl) shield around a central HPGe detector for in beam PGAA using a ²⁵²Cf neutron source has been calibrated and described in this paper. The facility is principally designed for measurement of the prompt gamma-ray spectra obtained due to thermal neutron capture using 1951.14 keV gamma line of ³⁵Cl as the internal mono-standard comparator. A calibration curves were developed in which a set of boron and cadmium standards were tested and the count rate to boron and cadmium mass curves were determined. This set of boron and cadmium measurements was compared with a method for determining composition using K ₀-PGAA. Conventional prompt neutrons capture Gamma-ray results were in a good agreement with the data obtained by K ₀-PGAA method. Detection limits and self-shielding study are presented.