·OH自由基与CH3CN反应机理及动力学

在CBS-QB3水平上研究了CH3CN 和·OH反应的势能面, 其中包括两个中间体和9个反应过渡态. 分别给出了各主要物质的稳定构型、相对能量及各反应路径的能垒. 根据计算的CBS-QB3势能面, 探讨了CH3CN+·OH反应机理. 计算结果表明, 生成产物P1(·CH2CN+H2O)的反应路径在整个反应体系中占主要地位. 运用过渡态理论对产物通道P1(·CH2CN+H2O)的速率常数k1(cm3·molecule-1·s-1)进行了计算. 预测了k1(cm3·molecule-1·s-1)在250-3000 K温度范围内的速率常数表达式为k1(250-3000 K)=2.06×10^-20T^3.045exp(-780.00/T). 通过与已有的实验值进行对比得出, 在实验所测定的250-320 K 范围内, 计算得到的k1的数值与已有的实验值比较吻合. 由初始反应物生成产物P1 (·CH2CN+H2O)只需要克服一个14.2 kJ·mol-1的能垒. 而产物·CH2CN+H2O生成后要重新回到初始反应物CH3CN+·OH, 则需要克服一个高达111.2 kJ·mol-1的能垒,这就表明一旦产物P1生成后就很难再回到初始反应物.     

355 nm光诱发的水体中HNO2与C6H5Br交叉反应机理

利用激光闪光光解技术研究了有氧、无氧条件下HNO2-C6H5Br-H2O体系的光化学反应. 研究结果表明, HNO2与C6H5Br的光化学反应由HNO2光解产生·OH自由基引发, ·OH与C6H5Br反应生成C6H5Br…OH, 反应速率常数为(8.1±0.7)×109 L·mol-1·s-1. C6H5Br…OH可被HNO2或O2氧化. C6H5Br…OH 与HNO2的二级反应速率常数为(3.0±0.5)×107 L·mol-1·s-1, 比C6H5Br…OH与O2的反应速率常数(4.0±0.6)×108 L·mol-1·s-1小, C6H5Br…OH与O2生成的C6H5Br…OHO2以(2.4±0.1)×104 s-1 的速率单分子衰减. 气相色谱-质谱联用(GC-MS)分析表明, C6H5Br…OH 与HNO2或O2作用可形成多种含硝基的化合物或醌类物质.     

CH3CH2,CH3CHCl,CH3CCl2与NO2反应微观动力学理论研究

运用量子化学密度泛函理论UB3LYP/6-311+G*和高级电子相关校正的偶合簇(CCSD(T)/6-311+G*)方法,对CH3CH2,CH3CHCl和CH3CCl2自由基与NO2反应的机理和动力学进行了理论研究,得到了体系的势能面信息和可能的反应机理.根据计算得到的各反应热力学参数及反应能垒,采用传统过渡态理论计算了各反应在温度T=298 K和T=700 K时的速率常数.研究结果表明,该类反应均通过1个中间体和1个过渡态生成产物,产物分别为CH3CHO+HNO,CH3CHO+ClNO和CH3CClO+ClNO.     

利用瞬态吸收光谱技术研究水体中苯与亚硝酸的交叉反应机理

利用瞬态吸收光谱技术进行了有氧、无氧条件下苯与亚硝酸水溶液复相体系的交叉反应机理研究 ,初步考察了这些瞬态物种的生长与衰减等行为 ;并对其光解产物进行了GC/MS分析 .研究表明 ,HNO2 在 3 5 5nm紫外光的照射下可产生·OH和NO+ ,·OH自由基和苯反应生成C6H6 OHadduct ,反应速率常数为 8 9× 10 9L·mol-1·s-1,在有氧条件下C6H6 OHadduct进一步氧化为C6H6 OHO2 ,反应速率常数 3 3× 10 8L·mol-1·s-1;NO+ 自由基和苯作用形成C6H6 NO+ πcomplex ,然后进一步分解     

烯丙基自由基(·C3H5)与一氧化氮(NO)反应势能面的理论研究

在CCSD(T)/6-311G(d,p)//B3LYP/6-311G(d,p)+ZPE水平上对反应·CHCHCH3+NO进行了计算, 并建立了其单重态的反应势能面. 在该反应中, 分别找到生成P1(CH3CHO+HCN), P2(CH3CHO+HNC), P3(CH3CN+HCHO), P4(CH3CCH+HNO)的4条产物通道, 其中·CHCHCH3和NO中的氮原子直接连接形成m1(trans-CH3CHCHNO), m1经过顺反异构形成m2(cis-CH3CHCHNO), m2再经过CCNO四元环合, 然后发生环解离, 最后生成产物P1(CH3CHO+HCN)是最可行的产物通道, 其余三条通道为次要产物通道. 该体系中生成P1的反应路径与同类体系·C2H3+NO的主要反应路径相类似, 两者的差别是前者为动力学可行的反应, 而后者为动力学不可行反应, 这使得·CHCHCH3+NO反应比·C2H3+NO反应更具有实际意义.     

离子分子反应装置的建立及应用

本文报导离子分子反应装置的建成并测量了O~++N_2反应的速率常数k.O~+离子由微波放电和电极电离产生,经快速流动,用四极质谱仪检测到.中性分子N_2经支管进入流动管,并与O~+离子反应,在温度为298 K 时,测得该反应速率常数为k=(2.50±0.52)×10~(-12)cm~3·molec~(-1)·s~(-1)(T=298 K)     

CF3CH2CF2CH3（HFC-365mfc）与Cl原子反应的微观机理及动力学性质

采用密度泛函理论方法 M06-2X结合6-31+G(d,p)基组研究了CF3CH2CF2CH3与Cl原子反应的反应机理.计算获得了CF3CH2CF2CH3的两种可区分的稳定几何构象RC1和RC2以及与它们相对应的8条氢提取反应通道和2条取代反应通道.运用改进的正则变分过渡态理论(ICVT)并结合小曲率隧道效应校正(SCT),在M06-2X/6-31+G(d,p)水平上计算了各氢提取通道的速率常数,并由Boltzmann配分函数得到总包反应的速率常数kT(cm3.molecule-1.s-1).计算结果表明,体系的总反应速率常数与已有实验值相吻合,进而给出了该反应在200～1000 K温度区间内反应速率常数kT的三参数表达式kT=1.88×10-22T3.76.exp(-1780.69/T),并讨论了两种构象RC1和RC2对总反应的贡献及各构象中氢提取发生在—CH3或—CH2—基团上的位置选择性.此外,由于缺少相关反应物及产物自由基标准生成焓ΔHf,298 K的数据,利用等化学键法估算了在上述物种的标准生成焓.     

CH3SH与NO2的反应机理及动力学

在G3B3, CCSD(T)/6-311＋＋G(d,p)//B3LYP/6-311＋＋G(d,p)水平上详细研究了CH3SH与基态NO2的微观反应机理. 在B3LYP/6-311＋＋G(d,p)水平得到了反应势能面上所有反应物、过渡态和产物的优化构型, 通过振动频率分析和内禀反应坐标(IRC)跟踪验证了过渡态与反应物和产物的连接关系. 在CCSD(T)/6-311＋＋G(d,p)和G3B3水平计算了各物种的能量, 得到了反应势能面. 利用经典过渡态理论(TST)与变分过渡态理论(CVT)并结合小曲率隧道效应模型(SCT), 分别计算了在200～3000 K温度范围内的速率常数kTST, kCVT和kCVT/SCT. 研究结果表明, 该反应体系共存在5个反应通道, 其中N进攻巯基上H原子生成CH3S＋HNO2的通道活化势垒较低, 为主要反应通道. 动力学数据也表明, 该通道在200～3000 K计算温度范围内占绝对优势, 拟合得到的速率常数表达式为k1CVT/SCT＝1.93×10－16T0.21exp(－558.2/T) cm3&;#8226;molecule－1&;#8226;s－1.     

甲烷-空气-H2O模拟光化学反应体系中CH3OO·自身复合反 应的研究

在1.013×10^5Pa,(298±2)K及O2-N2气氛下,研究了羟基自由基·OH引发的甲烷光化学反应体系中过氧甲基自由基CH3OO·自身复合反应。反应物和产物采用长光路Fourier红外光谱(LP-FTIR)和高效液相色谱(HPLC)测定。证实产物中有甲基过氧化氢(CH3OOH,MHP)和过氧甲醚(CH3OOCH3,DMP)存在并首次在该体系中发现了羟甲基过氧化氢(HOCH2OOH,HMHP).HMHP的检出表明,CH3OO·自身复合的可能途径之一生成了Criegee中间体过氧次甲基双自由基·CH2OO·,采用G2,G2(MP2)和G2(ful)方法对一些反应的标准焓变和标准Gibbs自由能变化进行了理论计算。结果表明CH3OO·自身复合生成·CH2OO·及·CH2OO·与H2O反应生成HMHP的途径在热力学上是可能的。     

355 nm光作用下C6F6-HNO2水溶液的反应机理

利用激光闪光光解-瞬态吸收光谱技术研究了355 nm 光作用下六氟苯(C6F6)-HNO2水溶液的反应机理, 探讨了中间产物及其动力学行为, 并对终产物进行了分析. 实验表明, C6F6可与HNO2光解产生的OH自由基反应生成加合物C6F6…OH, 二级反应速率常数为1.8×109 L·mol -1·s-1, 加合物吸收峰位置在250、270和400 nm处; C6F6…OH 加合物通过消除反应生成C6F5O·, 其表观生成常数为6.1×105 s-1. C6F6…OH与O2复合转化为C6F6OHO2, 二级反应速率常数为2.8×106 L·mol-1·s-1, C6F6OHO2峰位置与C6F6…OH 加合物相似. 终产物分析表明, OH自由基与六氟苯发生消除HF的反应而生成C6F5OH, 有O2时, 还产生四氟醌C6F4O2, 但无论有氧还是无氧体系, 均不发生硝基化反应.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.     

Knoevenagel condensation catalyzed by novel Nmm-based ionic liquids in water

A series of novel N-methyl morpholine (Nmm) based ionic liquids with 1,2-propanediol group were synthesized and used as catalysts for Knoevenagel condensation at room temperature in water. Under the effect of the catalyst, various aldehydes or aliphatic ketones could react with a wide range of activated methylene compounds well, including malononitrile, alkyl cyanoacetate, cyanoacetamide, β-diketone, barbituric acid, 2-arylacetonitrile and thiazolidinedione. Furthermore, most of the products could be separated just by filtrating and washing with water. Additionally, the catalyst is recyclable and applicable for the large-scale synthesis.     

Construction of polyheterocyclic spirotetrahydrothiophene derivatives via sulfa-Michael/aldol cascade reaction

A series of polyheterocyclic spirotetrahydrothiophene derivatives were obtained in moderate to excellent yields via a catalyst-free sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 under mild conditions. We also present the first asymmetric sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 with moderate to good enantioselectivities catalyzed by readily available chiral phase-transfer catalysts (PTCs).     

Suzuki-Miyaura reactions of the soluble guanylate cyclase inhibitor NS2028: a non-product specific route to C-8 substituted analogues

Both soluble guanylate cyclase (sGC) inhibitors ODQ 1 and NS2028 2 are synthesized via improved protocols. In the former case treating 3,4-dihydroquinoxalin-2(1H)-one oxime 8, which can be prepared in two steps from 1,2-benzenediamine, with 1,1′-carbonyldiimidazole (CDI) gives the dihydro-ODQ 10 that in the presence of KMnO₄ oxidises to give ODQ 1 in an overall yield of 46% starting from 1,2-benzenediamine. In the latter case, the synthesis affords NS2028 2 from 2-amino-4-bromophenol 3 in three steps with an overall yield of 85% and avoids the need for chromatography. Furthermore, Suzuki-Miyaura reaction conditions are described that enable the preparation of 8-aryl and 8-heteroaryl derivatives of NS2028 directly from NS2028 2. Finally, demethylation of the 8-(methoxyphenyl) substituted analogues afforded the 8-(hydroxyphenyl) derivatives 40-42. All new products are fully characterised.