Fine structure and magnetism of the cubic oxide compound Ni<Subscript>0.3</Subscript>Zn<Subscript>0.7</Subscript>O

The fine structure and spin system of the cubic oxide Ni_0.3Zn_0.7O compound prepared from the initial hexagonal phase by quenching a sample with a high temperature and applying an external hydrostatic pressure to it have been studied using magnetic measurements, synchrotron and X-ray diffraction. It has been revealed that the diffraction patterns of this compound contain a system of weak diffuse maxima with the wave vectors q = (1/6 1/6 1/6)2π/a and (1/3 1/3 1/3)2π/a, along with strong Bragg peaks of the cubic phase. It has been shown that the origin of the diffuse peaks is due to longitudinal and transverse displacements of ions with respect to symmetric crystallographic directions of the {111} type. The reasons for the ion displacement and specific features of the structure of the spin system of the strongly correlated oxide Ni_0.3Zn_0.7O compound have been briefly discussed.     

Modeling of the magnetic shape memory effect in Ni<Subscript>2</Subscript>MnGa films

The magnetic shape memory effect in Ni₂MnGa films is discussed and simulated in terms of the theory of diffuse martensitic transformations. Theoretical temperature and field dependences of the film deformation are obtained. Changes in the film shape under the action of the magnetic field and temperature are calculated.     

Magnetostructural phase transformation and shape memory effect of Fe-added Ni<Subscript>2</Subscript>MnGa films

The magnetostructural phase transformation and shape memory effect (SME) of Fe-added Ni₂MnGa films were investigated. The free-standing films were heat-treated at 1073 K for 3.6 ks and constraint-aged (CA) at various conditions (473 ~ 723 K, 0 ~ 14.4 ks) to make the two-way SME. The reversible two-way SME by the temperature change was confirmed through the martensitic transformation (MT) and its reversion. The gradient of strain-temperature curve, the effective recovery strain and the width of thermal hysteresis were dependent on the CA conditions. The magnetic field (MF) induced structural phase transformation was evaluated by an XRD apparatus in high MF up to 5 T. It was confirmed that the martensitic phase was stabilized by the MF. Furthermore, the SME by the MF was observed around MT temperature on cooling process for the CA film. It was concluded that the MF induced SME appeared by the induction of the MT with MF.     

Influence of deformation on the structural transformation of the Pd<Subscript>40</Subscript>Ni<Subscript>40</Subscript>P<Subscript>20</Subscript> amorphous phase

The influence of plastic deformation on the structure of the Pd₄₀Ni₄₀P₂₀ amorphous alloy has been investigated using X-ray diffraction and measurements of the velocity of sound. It has been revealed that the rolling of the sample leads to a change in the structure of the amorphous phase (distortion of the first coordination sphere) and that the structural transformations are more pronounced in the near-surface region of the sample. The rolling also results in a decrease in the transverse velocity of sound. The observed effects decrease with time. It has been demonstrated that the revealed effects are associated with the inelastic deformation of the amorphous alloy.     

Crystal structure of martensite and intermediate phases in Ni<Subscript>2</Subscript>MnGa studied by neutron diffraction

We have investigated crystal structures of martensite and intermediate phases in stoichiometric Ni₂MnGa. The neutron diffraction profile of the martensite phase measured at T = 4.2 K exhibits four satellites between [2 0 0]_P^* and [0 2 0]_P^* reflections (P stands for the parent phase) at incommensurate positions of [h 2-h 0]_P^* with h = 0.428, 0.863, 1.136 and 1.572. The profile of the intermediate phase measured at T = 210K exhibits two satellites between [2 0 0]_P^* and [0 2 0]_P^* reflections at incommensurate positions of [h 2-h 0]_P^* with h = 0.343 and 1.657. Although each satellite of the martensite phase moves toward its nearest fundamental reflection as temperature increases, that of the intermediate phase does not move significantly. On the contrary, the intensity of each satellite decreases significantly in the intermediate phase as temperature increases while not in the martensite phase. A synchrotron X-ray diffraction and a Rietveld analysis of the result reveal that, for both the phases, the displacement of atoms from the parent phase are represented by a sine wave whose propagation vector is parallel to [1 1 0]_P.     

Influence of Si substitution on structural,electronic and magnetic properties of Fe<Subscript>2</Subscript>MnGa Heusler compound

We investigate the electronic and magnetic properties of Fe₂MnGa_1?x Si _x alloy (x = 0, 0.25, 0.5, 0.75, and 1) using first-principles density functional theory within the generalized gradient approximation method. The lattice constant decreases linearly whereas bulk modulus increases with increasing Si content. The total magnetic moment varies linearly with increasing Si content, which follows the Slater-Pauling rule. Electronic band structure calculations indicate that the Fe₂MnGa_1?x Si _x exhibits half-metallic character for all the concentrations studied and the spin polarization and the spin-down band gap both increase with the Si content. Based on the magnetic properties calculations, the Heisenberg exchange coupling parameters give Fe-Mn ferromagnetic coupling and Mn-Mn antiferromagnetic coupling. The T _C first decreases and then increases with Si content, which is in well agreement with the experimental results.     

The evolution of electronic configuration and magnetic characterization of Fe<Subscript>9</Subscript>Ni<Subscript>1</Subscript>, Fe<Subscript>8</Subscript>Ni<Subscript>2</Subscript> alloy in theoretical calculation

To analyze the origin of the magnetic enhancement of Fe-Ni alloy, the electronicconfigurations and magnetic properties were investigated using density functional theorybased on the first-principle. The supercell (5 × 1 × 1) of Fe,Fe₉Ni₁ and Fe₈Ni₂ were constructed. Thedefect formation energy, band structure, density of states and electron density differencewere calculated. The results showed that Ni doping changed the electronic configuration ofFe atoms, resulting in the enhancement of spin polarization of Fe and the larger Bohrmagnetic moment in Fe-Ni alloys (Fe₉Ni₁). The results showed thatthe charge transfer and the atomic spacing between Fe atoms and the dopant Ni atoms playedan important role in determination of magnetic moment. The value of Fe supercell(5 × 1 × 1), Fe₉Ni₁ and Fe₈Ni₂ were 23.14,23.34 and 22.61μ _B, respectively.     

Investigation of the structural and electrochemical performance of Li<Subscript>1.2</Subscript>Ni<Subscript>0.2</Subscript>Mn<Subscript>0.6</Subscript>O<Subscript>2</Subscript> with Cr doping

Cr-doped layered oxides Li[Li_0.2Ni_0.2???x Mn_0.6???x Cr_2x ]O₂ (x?=?0, 0.02, 0.04, 0.06) were synthesized by co-precipitation and high-temperature solid-state reaction. The materials were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), high-resolution transmission electron microscopy (TRTEM), X-ray photoelectron spectroscopy (XPS), and electrochemical impedance spectroscopy (EIS). XRD patterns and HRTEM results indicate that the pristine and Cr-doped Li_1.2Ni_0.2Mn_0.6O₂ show the layered phase. The Li_1.2Ni_0.16Mn_0.56Cr_0.08O₂ shows the best electrochemical properties. The first discharge specific capacity of Li_1.2Ni_0.16Mn_0.56Cr_0.08O₂ is 249.6 mA h g^?1 at 0.1 C, while that of Li_1.2Ni_0.2Mn_0.6O₂ is 230.4 mA h g^?1. The capacity retaining ratio of Li_1.2Ni_0.16Mn_0.56Cr_0.08O₂ is 97.9% compared with 93.9% for Li_1.2Ni_0.2Mn_0.6O₂ after 80 cycles at 0.2 C. The discharge capacity of Li_1.2Ni_0.16Mn_0.56Cr_0.08O₂ is 126.2 mA h g^?1 at 5.0 C, while that of the pristine Li_1.2Ni_0.2Mn_0.6O₂ is about 94.5 mA h g^?1. XPS results show that the content of Mn³⁺ in the Li_1.2Ni_0.2Mn_0.6O₂ can be restrained after Cr doping during the cycling, which results in restraining formation of spinel-like structure and better midpoint voltages. The lithium-ion diffusion coefficient and electronic conductivity of Li_1.2Ni_0.2Mn_0.6O₂ are enhanced after Cr doping, which is responsible for the improved rate performance of Li_1.2Ni_0.16Mn_0.56Cr_0.08O₂.     

Reflection of elastic waves in a crystal of Heusler alloy Ni<Subscript>2</Subscript>MnGa in the phase transition range

The reflection of longitudinal and transverse acoustic waves from the free surface of the ferromagnetic shape memory alloy Ni₂MnGa that is located in the ranges of the premartensite and martensite phase transformations is considered. The propagation directions and amplitudes of the waves reflected in the (001) plane of the crystal are determined. They acquire the character of substantially quasi-longitudinal and quasi-transverse vibrations rather than being pure modes. The angles of wave reflection and conversion are shown to be effectively controlled by temperature and a magnetic field due to the colossal acoustic anisotropy of the crystal over the wide range of its phase transitions. Beginning from a certain critical angle of incidence of a quasi-transverse wave, the quasi-longitudinal wave having appeared upon reflection becomes an accompanying surface vibration, and it can be emitted into the bulk of the crystal when the phase transition point is approached. Two angles of full conversion of an incident quasi-longitudinal wave into a quasi-transverse wave are established, and their temperature dependences are found. Trivisonno’s experimental data for the ultrasound velocity and absorption in an Ni₂MnGa crystal are used to numerically estimate these acoustic effects.     

Experimental Study and Analysis of Absorption Spectra of Ni<Superscript>2+</Superscript> Ions in Nickel Orthoborate Ni<Subscript>3</Subscript>(BO<Subscript>3</Subscript>)<Subscript>2</Subscript>

The results of studies of the absorption spectra of nickel orthoborate Ni₃(BO₃)₂ in the range of electronic d–d-transitions are reported. The obtained data are analyzed in the framework of the crystal field theory. The Ni²⁺ ions are located in two crystallographically nonequivalent positions 2a and 4f with point symmetry groups C_2h and C₂, respectively, surrounded by six oxygen ions forming deformed octahedra. The absorption spectra exhibit three intense bands corresponding to spin-resolved transitions from the ground state of nickel ion ³A_2g (³F) to the sublevels of the ³T_2g (³F), ³T_1g (³F) and ³T_1g (³P) triplets split by the spinorbit interaction and the rhombic component of the crystal field. At temperatures below 100 K, the spectra exhibit a thin structure, in which phonon-free lines can be distinguished. Comparison of the calculated frequencies of the zero-phonon transitions with the experimental data allows estimating parameters of the crystal field acting on the nickel ions in the 2a- and 4f-positions, as well as the parameters of electrostatic interaction between the 3d electrons and spin-orbit interaction constants.     

Synthesis and electrochemical properties of P2-Na<Subscript>2/3</Subscript>Ni<Subscript>1/3</Subscript>Mn<Subscript>2/3</Subscript>O<Subscript>2</Subscript>

The pure phase P2-Na_2/3Ni_1/3Mn_2/3O₂ was synthesized by a solid reaction process. The optimum calcination temperature was 850 °C. The as-prepared product delivered a capacity of 158 mAh g^?1 in the voltage range of 2–4.5 V, and there was a phase transition from P2 to O2 at about 4.2 V in the charge process. The P2 phase exhibited excellent intercalation behavior of Na ions. The reversible capacity is about 88.5 mAh g^?1 at 0.1 C in the voltage range of 2–4 V at room temperature. At an elevated temperature of 55 °C, it could remain as an excellent capacity retention at low current rates. The P2-Na_2/3Ni_1/3Mn_2/3O₂ is a potential cathode material for sodium-ion batteries.     

Preparation of TiO<Subscript>2</Subscript>-coated LiCo<Subscript>1/3</Subscript>Ni<Subscript>1/3</Subscript>Mn<Subscript>1/3</Subscript>O<Subscript>2</Subscript> by electrostatic self-assembly method and its properties

A precursor of TiO₂–LiCo_1/3Ni_1/3Mn_1/3O₂ was prepared by electrostatic self-assembly method. The final product was obtained by heating the precursor at 400–450 °C for 4–6 h in air. X-ray diffraction (XRD), scanning electron microscope (SEM), X-ray photoelectron spectroscopy (XPS), and electrochemical tests were used to examine the structural, morphology, elementary valence, and electrochemical characteristics. XRD indicated that the TiO₂-coated material can be indexed by α-NaFeO₂ layered structure, which belongs to hexagonal-type space group R3m. XPS results confirmed the existence of TiO₂ compound on the surface of the coated sample. The SEM image showed that the material had spherically porous morphology with the uniform size about 6 μm. The initial charge–discharge capacity of the TiO₂-coated LiCo_1/3Ni_1/3Mn_1/3O₂ material was 168.8/160.0 mAh/g. After 60 cycles, the discharge capacity of the TiO₂-coated LiCo_1/3Ni_1/3Mn_1/3O₂ sample was 147.0 mAh/g, and the coulombic efficiency was 94.0%. Compared with the uncoated sample, the electrochemical performance of TiO₂-coated LiCo_1/3Ni_1/3Mn_1/3O₂ was improved.     

Mechanical alloying of Ni<Subscript>80</Subscript>Ta<Subscript>20</Subscript> and Ni<Subscript>80</Subscript>Nb<Subscript>20</Subscript>. Crystallization of the amorphous phase

The sequence and crystallization kinetics of the amorphous phase have been analyzed by differential scanning calorimetry and X-ray diffraction for mechanochemically activated Ni₈₀Ta₂₀ and Ni₈₀Nb₂₀ samples. The formation of equilibrium products from the amorphous phase occurs through the formation of metastable products of the A3 type. The kinetic parameters (activation energy and reaction order) and thermodynamic characteristics of this process are determined. Crystallization of the amorphous phase for the Ni₈₀Ta₂₀ and Ni₈₀Nb₂₀ systems occurs due to the growth of existing nuclei through the polymorphic and eutectic mechanisms, respectively. The thermal effects of the synthesis of equilibrium products from a mechanochemically activated mixture of components are identified.     

Influence of sol-gel precursors on the electrochemical performance of NaMn<Subscript>0.33</Subscript>Ni<Subscript>0.33</Subscript>Co<Subscript>0.33</Subscript>O<Subscript>2</Subscript> positive electrode for sodium-ion battery

Among the various cathode materials explored for sodium-ion batteries (SIBs), NaMn_0.33Ni_0.33Co_0.33O₂, with a layered oxide structure, is a promising material due to its high theoretical capacity (240 mAhg^?1). We have synthesized NaMn_0.33Ni_0.33Co_0.33O₂ using two different types of precursors, namely metal acetates and metal nitrates by the sol-gel method. XRD patterns confirm the formation of a stable phase of the material at 900 °C. Coupled TGA-FTIR analysis was used to optimize the calcination conditions and to understand the hydrolysis and condensation mechanism of the sol-gel precursors. FTIR spectra extracted at different temperatures reveal the polymer network-forming tendency of the acetate ligands whereas the polymerization is inhibited in the nitrate precursors. SEM analysis shows spherical and platelet morphologies of samples synthesized from nitrate and acetate precursors, respectively. Using in situ impedance and galvanostatic charge/discharge studies, we observed that the precursors used to synthesize the cathode material influence the electrochemical properties of the material, as in this case, where we observe a 20 % improvement in terms of capacity by using acetate precursors instead of nitrate precursors.     

Effect of severe plastic deformation and ultrarapid quenching on the properties of magnetic shape memory alloys near the Ni<Subscript>2</Subscript>MnGa composition

The effect of ultrarapid quenching from melt and subsequent severe plastic deformation by torsion in Bridgman anvils on the temperatures of martensitic (T _M) and magnetic (T _C ) phase transitions in magnetic shape memory alloys has been investigated. The features of the crystal structure and magnetic, electric, and optical properties of Ni₂MnGa-based alloys with different degrees of structural ordering are discussed. The effect of doping with copper and cobalt on the properties of nonstoichiometric Ni₅₀Mn_28.5Ga_21.5 alloy is considered.     

CeO<Subscript>2</Subscript> coating to improve the performance of Li[Li<Subscript>0.2</Subscript>Mn<Subscript>0.54</Subscript>Ni<Subscript>0.13</Subscript>Co<Subscript>0.13</Subscript>]O<Subscript>2</Subscript>

The Li[Li_0.2Mn_0.54Ni_0.13Co_0.13]O₂ coated with CeO₂ has been fabricated by an ionic interfusion method. Both the bare and the CeO₂-coated samples have a typical layered structure with R-3m and C2/m space group. The results of XRD and TEM images display that the CeO₂ coating layer on the precursor could enhance the growth of electrochemically active surface planes ((010), (110), and (100) planes) in the following ionic interfusion process. The results of galvanostatic cycling tests demonstrate that the CeO₂-coated sample has a discharge capacity of 261.81 mAh g^?1 with an increased initial Coulombic efficiency from 62.4 to 69.1% at 0.05 °C compared with that of bare sample and delivers an improved capacity retention from 71.7 to 83.4% after 100 cycles at 1 °C (1 °C?=?250 mA g^?1). The results of electrochemical performances confirm that the surface modification sample exhibits less capacity fading, lower voltage decay, and less polarization.     

Effects of Sn doping on electrochemical characterizations of Li[Ni<Subscript>1/3</Subscript>Co<Subscript>1/3</Subscript>Mn<Subscript>1/3</Subscript>]O<Subscript>2</Subscript> cathode material

Li[Ni_1/3Co_1/3Mn_1/3]O₂ and Sn-doped Li[Ni_1/3Co_1/3Mn_1/3]O₂ cathode materials for lithium battery are synthesized by a solid-state method. The samples are characterized by X-ray diffraction, scanning electron microscope, electrochemical impedance spectroscopy (EIS), and charge–discharge test. The results show that the Sn-doped Li[Ni_1/3Co_1/3Mn_1/3]O₂ has a typical hexagonal α-NaFeO₂ structure and strawberry-like shape with uniform particle size. It has also been found that the Sn-doped Li[Ni_1/3Co_1/3Mn_1/3]O₂ reveals better electrochemical performances than that without Sn doping. The EIS results suggest that Sn presence decreases the total resistance of Li[Ni_1/3Co_1/3Mn_1/3]O₂, which should be related to the improvement on the electrochemical properties.     

Band structure of a new layered La<Subscript>3</Subscript>Ni<Subscript>4</Subscript>P<Subscript>4</Subscript>O<Subscript>2</Subscript> superconductor

The ab initio FLAPW-GGA calculations of the band structure of a new layered low-temperature (T _C ～ 2.2 K) La₃Ni₄P₄O₂ superconductor are presented. The energy bands, distributions of the densities of electron states, charge states of the atomic layers, low-temperature electron specific heat, and molar Pauli paramagnetic susceptibility for La₃Ni₄P₄O₂ have been determined. They are discussed compared to the existing experimental data.     

Investigation on lithium ion conductivity and structural stability of yttrium-substituted Li<Subscript>7</Subscript>La<Subscript>3</Subscript>Zr<Subscript>2</Subscript>O<Subscript>12</Subscript>

Advanced Li-air battery architecture demands a high Li⁺ conductive solid electrolyte membrane that is electrochemically stable against metallic lithium and aqueous electrolyte. In this work, an investigation has been carried out on the microstructure, Li⁺ conduction behaviour and structural stability of Li₇La_3-x Y _x Zr₂O₁₂ (x = 0.125, 0.25 and 0.50) prepared by conventional solid-state reaction technique. The phase analysis of Li₇La_3-x Y _x Zr₂O₁₂ (x = 0.125, 0.25 and 0.50) sintered at 1200 °C by powder X-ray diffraction (PXRD) and Raman confirms the formation of high Li⁺ conductive cubic phase (\( Ia\overline{3}d \)) lithium garnets. Among the investigated lithium garnets, Li₇La_2.75Y_0.25Zr₂O₁₂ sintered at 1200 °C exhibits a maximized room temperature total (bulk + grain boundary) Li⁺ conductivity of 3.21 × 10^?4 S cm^?1 along with improved relative density of 96 %. The preliminary investigation on the structural stability of Li₇La_2.75Y_0.25Zr₂O₁₂ in the solutions of 1 M LiCl, dist. H₂O and 1 M LiOH at 30 °C/50 °C indicates that the Li₇La_2.75Y_0.25Zr₂O₁₂ is relatively stable against 1 M LiCl and dist. H₂O. Further electrochemical investigation is essential for practical application of Li₇La_2.75Y_0.25Zr₂O₁₂ as protective solid electrolyte membrane in aqueous Li-air battery.