High pressure raman spectra of crystalline sulfur

Abstract

Well—resolved Raman spectra of crystalline sulfur have been recorded in a diamond anvil cell (DAC) in the pressure range from atmospheric pressure to 50 GPa at room temperature, using an 0.6 m triple spectrograph and a CCD multichannel detector. The spectra indicate two phase transitions in the pressure region between 10 and 15 GPa.     

Behavior of decomposed ammonia borane at high pressure

High pressure behavior of ammonia borane after thermal decomposition was studied by Raman spectroscopy at high pressure up to 10 GPa using diamond anvil cell (DAC). The ammonia borane was decomposed at around 140 °C under the pressure at ∼0.7 GPa. Raman spectra show the hydrogen was desorbed within 1 h. The hydrogen was sealed in DAC well and cooled down to room temperature. Applying higher pressure up to ∼10 GPa indicates interactions between the products and loss of dihydrogen bonding. No rehydrogenation was detected in the pressure range investigated.     

Phase transitions in 1,3,4-oxadiazole crystals under high pressure

Crystalline 2,5-di(4-nitrophenyl)-1,3,4-oxadiazole (DNO) has been investigated at pressures up to 5 GPa using Raman and optical spectroscopy as well as energy dispersive X-ray techniques. At ambient pressure DNO shows an orthorhombic unit cell (a=0.5448 nm, b=1.2758 nm, c=1.9720 nm, density 1.513 g cm⁻³) with an appropriate space group Pbcn. From Raman spectroscopic investigations three phase transitions have been detected at 0.88, 1.28, and 2.2 GPa, respectively. These transitions have also been confirmed by absorption spectroscopy and X-ray measurements. Molecular modeling simulations have considerably contributed to the interpretation of the X-ray diffractograms. In general, the nearly flat structure of the oxadiazole molecule is preserved during the transitions. All subsequent structures are characterized by a stack-like arrangement of the DNO molecules. Only the mutual position of these molecular stacks changes due to the transformations so that this process may be described as a topotactical reaction. Phases II and III show a monoclinic symmetry with space group P2₁/c with cell parameters a=1.990 nm, b=0.500 nm, c=1.240 nm, β=91.7°, density 1.681 g cm⁻³ (phase II, determined at 1.1 GPa) and a=1.890 nm, b=0.510 nm, c=1.242 nm, β=89.0°, density 1.733 g cm⁻³ (phase III, determined at 2.0 GPa), respectively. The high-pressure phase IV stable at least up to 5 GPa shows again an orthorhombic structure with space group Pccn with corresponding cell parameters at 2.9 GPa: a=0.465 nm, b=1.920 nm, c=1.230 nm and density 1.857 g cm⁻³. For the first phase a blue pressure shift of the onset of absorption by about 0.032 eV GPa⁻¹ has been observed that may be explained by pressure influences on the electronic conjugation of the molecule. In the intermediate and high-pressure phases II–IV the onset of absorption shifts to increased wavelengths due to larger intermolecular interactions and enhanced excitation delocalization with decreasing intermolecular spacing.     

高温高压下方解石相转变的拉曼光谱原位实验研究

用热液金刚石压腔装置结合拉曼光谱技术研究了高温高压下方解石的相变过程及拉曼光谱特征。结果表明:常温条件下,体系压力增至1 666和2 127 MPa时,方解石的拉曼特征峰155cm-1消失,1 087cm-1峰分裂为1 083和1 090cm-1两个谱峰、282cm-1峰突然降至231cm-1,证明其转变为方解石-Ⅱ和方解石-Ⅲ。在起始压力为2 761MPa和低于171℃的升温过程中,方解石-Ⅲ的拉曼散射的各个特征振动峰没有变化。当温度达到171℃,方解石晶体完全变成不透明状,其对称伸缩振动峰1 087cm-1、面内弯曲振动峰713cm-1和晶格振动峰155和282cm-1均发生突变,说明方解石-Ⅲ相变生成一种碳酸钙新相。体系降至常温,该新相一直保持稳定不变,表明高温高压下方解石向碳酸钙新相的转变过程是不可逆的。方解石-Ⅲ与碳酸钙新相之间的相变线方程为P(MPa)=9.09.T(℃)+1 880。碳酸钙新相的对称伸缩振动峰(ν1 087)随压力、温度的变化率分别为dν/dP=5.1(cm-1.GPa-1),dν/dT=-0.055 3(cm-1.℃-1)。     

On the formation of photoinduced high pressure phases in sulfur below 10 GPa

Abstract

We investigate the phase transformations in sulfur for pressures up to 10 GPa by time resolved Raman spectroscopy. The transition to the photosensitive phase p-S is stimulated by the blue laser line between 3 and 9 GPa. The kinetics of this transition as derived from the time evolution of the intensities of characteristic Raman excitations shows the typical features of an activated first order phase transition. This transformation proceeds via a disordered (amorphous) intermediate state.

Above 9 GPa a further phase change to S, is kinetically characterized and follows similar rules i.e. the integral intensities of selected S, Raman lines exhibit a sigmoidal time dependence. In both high pressure phases a broad Raman excitation between 800 and 1000 cm^?1 is observed.     

Phase transformations in amorphous fullerite C60 under high pressure and high temperature

First phase transformations of amorphous fullerite C₆₀ at high temperatures (up to 1800 K) and high pressures (up to 8 GPa) have been investigated and compared with the previous studies on the crystalline fullerite. The study was conducted using neutron diffraction and Raman spectroscopy. The amorphous fullerite was obtained by ball-milling. We have shown that under thermobaric treatment no crystallization of amorphous fullerite into С₆₀ molecular modification is observed, and it transforms into amorphous-like or crystalline graphite. A kinetic diagram of phase transformation of amorphous fullerite in temperature–pressure coordinates was constructed for the first time. Unlike in crystalline fullerite, no crystalline polymerized phases were formed under thermobaric treatment on amorphous fullerite. We found that amorphous fullerite turned out to be less resistant to thermobaric treatment, and amorphous-like or crystalline graphite were formed at lower temperatures than in crystalline fullerite.     

Elemental sulfur under high hydrostatic pressure. An up-to-date Raman study

We report a high pressure Raman study of orthorhombic elemental sulfur from ambient pressure to ～ 25 GPa. Using a near infrared laser and low laser intensity on the scattering volume, we achieve off-resonant conditions up to larger pressures in comparison with previous studies. Raman spectra were recorded over the full spectral range including external (librational, translational) and internal (bond bending and bond stretching) modes. Drastic changes are observed as regards the peak frequencies, relative intensities and band splitting of degenerate modes. The main outcome of the present study is the observation of a “structural” transition at ～ 16 GPa manifested as slope changes of certain frequencies and sudden relative intensities changes. The present findings are discussed in the context of previous pressure Raman studies and comparison with existing X-ray diffraction as well as ab initio molecular dynamics results is attempted.     

Synthesis of Ge-Sn at high pressure and high temperature in a laser-heated diamond anvil cell

Ge–Sn compound is predicted to be a direct band gap semiconductor with a tunable band gap. However, the bulk synthesis of this material by conventional methods at ambient pressure is unsuccessful due to the poor solubility of Sn in Ge. We report the successful synthesis of Ge–Sn in a laser-heated diamond anvil cell (LHDAC) at ~7.6 GPa &; ~2000 K. In situ Raman spectroscopy of the sample showed, apart from the characteristic Raman modes of Ge TO (Г) and β-Sn TO (Г), two additional Raman modes at ~225 cm^?1 (named Ge–Sn₁) and ~133 cm^?1 (named Ge–Sn₂). When the sample was quenched, the Ge–Sn₁ mode remained stable at ~215 cm^?1, whereas the Ge–Sn₂ mode had diminished in intensity. Comparing the Ge–Sn Raman mode at ~225 cm^?1 with the one observed in thin film studies, we interpret that the observed phonon mode may be formed due to Sn-rich Ge–Sn system. The additional Raman mode seen at ~133 cm^?1 suggested the formation of low symmetry phase under high P–T conditions. The results are compared with Ge–Si binary system.     

1,3,4-oxadiazole crystals under high pressure-phase transitions and properties

Abstract

Two differently substituted crystalline 2,5-diphenyl-1,3,4-oxadiazole compounds are investigated in the pressure range up to 5GPa. Phase transitions are detected using Raman and X-ray investigations.     

Phase transitions in BaCeO3: neutron diffraction and Raman studies

Polycrystalline samples and small single crystals of the perovskite BaCeO₃ were studied by neutron diffraction and Raman spectrometry between 300 and 1200 K. The controversy about the phase transitions originally deduced from our previous Raman study and those observed since by neutron diffraction by Knight has stimulated this work. Pretransitional effects which are detected by Raman much before long-range ordering takes place can partly explain the above disagreement. A continuous monitoring of the structural changes by neutron diffraction and by Raman spectroscopy including polarization analysis has allowed discussion of the transition mechanisms: The first transition Pnma–Imma takes place at 573 K and is of second order. Although some modes soften when the temperature is raised as in many of these perovskite compounds the transition is likely partly displacive partly order–disorder. The Raman modes which disappear transform in modes at the X point of the Brillouin zone of the Imma phase. The second transition Imma–R c takes place at 673 K and is first order. The last transition R c–Pm3m occurs above 1200 K and the transition temperature which can be deduced by extrapolation to zero Raman intensity is in good agreement with neutron results. This second order transition is progressive and begins at about 400 K, the intermediate R c structure appearing as an attempt for slowing down the structural evolution toward the cubic perovskite form.     

Decomposition of binary sulphate KHSO4 at high pressure

Abstract

Pressure induced decomposition (PID) is known to occur only at elevated temperatures. Here we report its first occurrence at ambient temperature in a binary sulphate, KHSO₄ at 4kbar. Raman spectroscopy is used for identifying the decomposition products as K₃H(SO_{2 4}) and H₂SO₄ from their characteristic spectra. One of the decomposition products being a liquid is argued to be the reason for the occurrence of the phenomenon at ambient temperature. Other possible decomposition routes are also examined.     

Phase Transition and vibration properties of MnCO3 at high pressure and high-temperature by Raman spectroscopy

The high pressure and high-temperature behavior of MnCO₃ was investigated up to 55?GPa at ambient temperature and up to 573?K at ambient pressure by Raman spectroscopy, respectively. Some new modes were detected at ～16 and ～32?GPa, which were assigned to MnCO₃-I below 16?GPa and to MnCO₃-II above 32?GPa, and to a coexisting phase of them in between. The high pressure vibration properties of all Raman modes, especially high frequency modes, were systematically reported. The coexisting phase of MnCO₃-I and MnCO₃-II had much easier compressibility than the MnCO₃-II phase. The thermal stability of MnCO₃ was at least to 573?K and its thermal expansion along the c axis was easier than a and b axes.     

Structures and phase transitions of ScH3 under high pressure

The structures and the phase transitions of ScH3 under high pressure are investigated using first-principles calculations. The calculated structural parameters at zero pressure agree well with the available experimental data. With increasing pressure, the transition sequence hcp (GdH3 -type)→ C2/m →fcc→hcp (YH3-type)→Cmcm of ScH3 is predicted first; the corresponding transition pressures at 0 K are 23 GPa, 25 GPa, 348 GPa, and 477 GPa, respectively. The C2/m symmetry structure is a possible candidate but not a good one as the intermediate state from hexagonal to cubic in ScH3 . On the other hand, via the analysis of the structures of hexagonal ScH2.9 , cubic ScH3 , and cubic ScH2 , we find that the repulsive interactions of H-H atoms must play an important role in the transition from hexagonal to cubic.     

基于拉曼频移的白宝石压腔无压标系统高温高压实验标定

在高压实验科学中, 各类宝石压腔是最为常见的高压设备之一, 其样品腔中压力的精确标定是实验的关键. 目前, 人们主要通过加入红宝石等压标物质来进行定压, 但压标物质的加入会增加实验的装样难度, 改变样品腔中的物理化学环境, 甚至直接与实验样品发生反应, 从而对实验结果产生影响. 在0–6.3 GPa和300–573 K下, 利用共聚焦拉曼显微镜, 根据白宝石压砧砧面的ν₁₂ 拉曼频移与温度和压力的变化关系, 建立了一套适用于高温高压水热体系的无压标白宝石压腔系统. 实验结果表明: 白宝石砧面的ν₁₂ 峰随着压力的升高发生线性蓝移, 而随着温度升高则发生线性红移, 且温度和压力对拉曼频移的影响存在耦合效应. 利用本实验结果, 可在高温高压下根据白宝石砧面的拉曼频移计算出样品腔的压力P=(Δλ-0.01913×ΔT)/(1.9158-0.00105×ΔT), 在物理学、材料学和地球科学等领域具有重要应用.     

High pressure room temperature and high pressure low temperature resistivity studies on As-Te-Se glasses

Abstract

The electrical resistivity measurements have been carried out on bulk As_xTe_100-x-ySe_y (30 ≤ ′ ≤ 50; 10 ≤ y ≤ 25) glasses up to 8 Gpa pressure, and temperature down to 77 K. All the As-Te-Se glasses are found to exhibit a continuous semiconductor to metal transition under pressure. However, glasses with a mean coordination number Z ≥ 2.4 show an initial plateau in resistivity, followed by a continuous decrease. This behaviour is consistent with the earlier observation on the As-Te glasses and is explained in terms of the changes in the local structure of the chalcogenide glasses with the composition.     

Raman study of datolite CaBSiO4(OH) at simultaneously high pressure and high temperature

Using an in situ method of Raman spectroscopy and resistance‐heated diamond anvil cell, the system datolite CaBSiO₄(OH) – water has been investigated at simultaneously high pressure and temperature (up to Р ~5 GPa and Т ~250 °С). Two polymorphic transitions have been observed: (1) pressure‐induced phase transition or the feature in pressure dependence of Raman band wavenumbers at P = 2 GPа and constant T = 22 °С and (2) heating‐induced phase transition at T ~90 °С and P ~5 GPа. The number of Raman bands is retained at the first transition but changed at the second transition. The first transition is mainly distinguished by the changes in the slopes of pressure dependence of Raman peaks at 2 GPa. The second transition is characterized by several strong changes: the wavenumber jumps of major bands, the merging of strong doublets at 378 and 391 cm⁻¹ (values for ambient conditions), the splitting of the intermediate‐intensity band at 292 cm⁻¹, and the transformation of some low‐wavenumber bands at 160–190 cm⁻¹. No spectral and visual signs of overhydration and amorphization have been observed. No noticeable dissolution of datolite in the water medium occurred at 5 GPa and 250 °С after 3 h, which corresponds to typical conditions of the ‘cold’ zones of slab subduction. Copyright © 2014 John Wiley & Sons, Ltd.     

Probing structural stability of double-walled carbon nanotubes at high non-hydrostatic pressure by Raman spectroscopy

Theoretical calculations predict that the collapse pressure for double-walled carbon nanotubes (DWCNTs) is proportional to 1/R ³, where R is the effective or average radius of a DWCNT. In order to address the problem of CNT stability at high pressure and stress, we performed a resonance Raman study of DWCNTs dispersed in sodium cholate using 532 and 633 nm laser excitation. Raman spectra of the recovered samples show minor versus irreversible changes with increasing I _D/I _G ratio after exposure to high non-hydrostatic pressure of 23 and 35 GPa, respectively. The system exhibits nearly 70% pressure hysteresis in radial breathing vibrational mode signals recovery on pressure release which is twice that predicted by theory.     

Hardness of materials at high temperature and high pressure

The intrinsic character of the correlation between hardness and thermodynamic properties of solids has been established. The proposed thermodynamic model of hardness allows one to easily estimate hardness and bulk moduli of known or even hypothetical solids from the data on Gibbs energy of atomization of the elements or on the enthalpy at the melting point. The correctness of this approach is illustrated by an example of the recently synthesized superhard diamond-like BC₅ and orthorhombic modification of boron, γ-B₂₈. The pressure and/or temperature dependences of hardness were calculated for a number of hard and superhard phases, i.e. diamond, cBN, B₆O, B₄C, SiC, Al₂O₃, β-B₂O₃ and β-rh boron. Excellent agreement between experimental and calculated values is observed for temperature dependences of Vickers and Knoop hardness. In addition, the model predicts that some materials can become harder than diamond at pressures in the megabar range.     

常温及常压至1.2GPa条件下异辛烷的拉曼光谱研究

利用碳化硅压腔在室温(25℃)下,研究了异辛烷(2,2,4-三甲基戊烷)在常压至1.2GPa条件下的拉曼光谱特征。研究结果表明,异辛烷CH2和CH3的碳氢伸缩振动的拉曼位移随着压力的增大均呈线性向高频方向移动,其拉曼位移与压力的函数关系为:ν2 873=0.002 8P+2 873.3;ν2 905=0.004 8P+2 905.4;ν2 935=0.002 7P+2 935.0;ν2 960=0.012P+2 960.9。在1.0GPa附近,异辛烷的拉曼位移出现突变,与显微镜下观察发生的异辛烷液-固相变一致。结合异辛烷在常压下的熔点数据,获得了异辛烷的液-固两相相图,并根据克拉贝龙方程获得了液-固相转变过程中的摩尔体积变化量ΔVm=4.46×10-6 m3.mol-1和熵变ΔS=-30.32J.K-1.mol-1。     

Pressure-induced polymorphism in enstatite (MgSiO3) at room temperature: clinoenstatite and orthoenstatite

The phase transition of a synthetic clinoenstatite in a diamond-anvil cell has been studied by using Raman spectroscopy at various pressures and room temperature. The phenomena observed in clinoenstatite have been compared with that observed in orthoenstatite. It is found that the pressure-induced phase transitions in the two enstatites are reversible, but with different transition pressures and transition behavior. An analysis of Raman spectra has revealed that the two enstatites have different high-pressure polymorphs. This result suggests that the space group of the high-pressure polymorph of orthoenstatite is not of C2/c, and that orthoenstatite and orthoferrosilite have different transition routes at room temperature and high pressure. The compressional behavior of the high-PC2/c enstatite is also discussed according to the pressure dependences of Raman frequencies.