On the hydrogen etching mechanism in plasma nitriding of metals

Iron alloys and aluminum were nitrogen implanted in a controlled oxygen atmosphere and the role of hydrogen on the surface etching mechanisms studied. The surface composition was analyzed by in situ photoemission electron spectroscopy (XPS). In iron alloys, hydrogen strongly etches oxygen, improving nitrogen retention on the surface. On the other hand, hydrogen removes nitrogen from aluminum surfaces, with a deleterious effect on the nitriding effectiveness. The oxygen removal in iron alloys is associated with the catalytic effect of electrons in d-orbitals and the nitrogen removal in aluminum is associated with a steric effect.     

һ�ּ�����ܵ�������絼�ʵİ뾭��ģ��

为了准确计算稠密等离子体电离平衡,在理想Saha方程的基础上,加入了压致电离理论和德拜理论相结合的修正。此电离模型可以描述稠密等离子体内电离机制随着密度的增加由热电离转变为压致电离的现象。压致电离理论结合德拜理论修正的 Saha 方程的计算结果与其它电离模型结果作了对比和分析。电离气体区域采用完全电离等离子体模型计算电子弛豫时间,而在凝聚态区域采用电子平均自由程计算电子弛豫时间。提出了将两个区域平滑连接起来的公式,从而建立了一种可以计算从理想等离子体态到凝聚态物质的半经验电导率模型,半经验模型计算结果与实验数据作了对比。     

一种计算稠密等离子体电导率的半经验模型

为了准确计算稠密等离子体电离平衡,在理想Saha 方程的基础上,加入了压致电离理论和德拜理论相结合的修正。此电离模型可以描述稠密等离子体内电离机制随着密度的增加由热电离转变为压致电离的现象。压致电离理论结合德拜理论修正的Saha 方程的计算结果与其它电离模型结果作了对比和分析。电离气体区域采用完全电离等离子体模型计算电子弛豫时间,而在凝聚态区域采用电子平均自由程计算电子弛豫时间。提出了将两个区域平滑连接起来的公式,从而建立了一种可以计算从理想等离子体态到凝聚态物质的半经验电导率模型,半经验模型计算结果与实验数据作了对比。     

纳米晶粒在高压下的相变

文章报道了纳米晶粒的晶粒尺寸对压力诱导相变的影响的最新研究进展．采用热力学理论揭示了纳米晶体材料的相变压力与同种大块材料不同的主要因素是体积变化率、表面能差和内能差．通过估算这3个因素的具体大小，可解释文献中报道的实验结果，并且可以确定同种大块材料和纳米晶体材料之间的相变压力发生差异的控制因素．在纳米晶体材料中，晶粒尺寸对结构稳定性和相变压力的影响与体系本身有关．     

空气中飞秒激光自聚焦等离子体通道的电导特性

 通过电学探测法,采用不同焦距的聚焦透镜,在不同激光能量、不同极性外加电压的条件下,对大气中的飞秒激光自聚焦等离子体电离通道特性进行了实验研究。发现激光脉冲经不同焦距的聚焦透镜作用后均存在较长的电离通道,通道的等效电阻率有所变化,通常电阻率的最大值出现在透镜的几何焦点附近,并且焦距越长,此电阻率的局部峰值点离几何焦点位置越近。在外加不同极性电压时,自由电子受到所加静电场作用力、洛仑兹力以及有质动力的共同作用。焦点前,通道电流变化不明显,加正向电压产生的电流略微大于加负向电压时的电流;焦点后则是加负向电压产生的电流大于加正向电压时的电流。     

���ܶȵ�������ģ�������˲��������

用高密度等离子体模型可以计算出一整套输运参数,并且在很宽的等离子体温度和密度范围内有合理的精度,可广泛应用于Z箍缩等离子体、激光聚变和磁约束聚变等领域,并将这个模型计算出的各种输运参数拟合成了实用的公式。     

Pressure-induced structural transformation in potassium stanichloride

Pressure-induced structural transformation in potassium stanichloride has been studied by x-ray diffraction at room temperature. The change in the diffraction pattern started at about a pressure of 15 kbar and continued upto 50 kbar. The pattern recorded at about 50 kbar could be indexed basing on an orthorhombic lattice, with lattice parametersa=7.32,b=7.02 andc=8.02 Å.     

Pressure-induced ferromagnetism of fullerenes

Ferromagnetic behavior of polymerized fullerenes appears quite close to the boundary where the fullerene molecules are destroyed. However, when the presence of a disordered or graphitic phase is detectable by the standard characterisation methods, the ferromagnetic features quickly disappear.     

The properties of copper films deposited on polyimide by nitrogen and oxygen plasma pre-treatment

Extensive studies on the relationship between a copper thin film and its polyimide substrate show that the adhesion strength is very weak. In this work, we show how to reduce Cu film resistivity and improve the adhesion strength between Cu and polyimide. After nitrogen and oxygen plasma treatment, polyimide substrates can substantially improve the resistivity and adhesion strength deposited Cu. It is found that the lowest resistivity is 4.22 μΩ cm and the maximum adhesion strength is 72.23 MPa for a polymide substrate treated in oxygen plasma for 5 min.     

Hamilton-Jacobi theory for continuation of magnetic field across a toroidal surface supporting a plasma pressure discontinuity

The vanishing of the divergence of the total stress tensor (magnetic plus kinetic) in a neighborhood of an equilibrium plasma containing a toroidal surface of discontinuity gives boundary and jump conditions that strongly constrain allowable continuations of the magnetic field across the surface. The boundary conditions allow the magnetic fields on either side of the discontinuity surface to be described by surface magnetic potentials, reducing the continuation problem to that of solving a Hamilton-Jacobi equation. The characteristics of this equation obey Hamiltonian equations of motion, and a necessary condition for the existence of a continued field across a general toroidal surface is that there exist invariant tori in the phase space of this Hamiltonian system. It is argued from the Birkhoff theorem that existence of such an invariant torus is also, in general, sufficient for continuation to be possible. An important corollary is that the rotational transform of the continued field on a surface of discontinuity must, generically, be irrational.     

Relaxation of the normal electrical resistivity induced by high-pressure in strongly underdoped YBa2Cu3O7–δ single crystals

We investigate the relaxation of the normal electrical resistivity, induced by high-pressure in YBa₂Cu₃O_6.45 single crystals. It is determined that the pressure affects to the phase composition of the sample. Under pressure phases with different (but similar) critical temperatures form. It is determined that the application-removal pressure process is completely reversible. Above T_c the temperature dependence of the resistivity in the layers' plane at different hydrostatic pressures can be approximated with high accuracy with the scattering of electrons by phonons model. With increasing pressure, the residual resistance is reduced and the contribution of intraband s–s scattering increases. Additionally, the role of the interband s–d scattering and the Debye temperature is enhanced.     

Physical and chemical phenomena occurring between solid ceramics and liquid metals and alloys at laser and plasma composite coatings formation: A review

The review describes the physical and chemical phenomena occurring between solid ceramics used as reinforcement and liquid metals and alloys used as matrix in the composite coatings. Initially, the properties of typical matrix metals as Ni, Co, Fe and alloys as Ni-based (NiCr, NiAl, NiCrAlY,…) and Co-based (Stellites) alloys in liquid state are described. Then, the phenomena related to the diffusion of some atoms such as nitrogen or carbon in liquid metals and alloys solidification are described. Subsequently, the phenomena at the interface between liquid metals and alloys and solid ceramics such as oxides or carbides during the coatings' formation are reviewed. Finally, the methods of composite coatings deposition using laser cladding and plasma transferred arc are described and the properties of the composite coatings related to their microstructure are discussed by taking into account the phenomena in melt-pool.     

Synthesis of nano-crystalline zirconium aluminium oxynitride (ZrAlON) composite films by dense plasma Focus device

Zirconium aluminium oxynitride multiphase composite film is deposited on zirconium substrate using energetic nitrogen ions delivered from dense plasma Focus device. X-ray diffractometer (XRD) results show that five Focus shots are sufficient to initiate the nucleation of ZrN and Al₂O₃ whereas 10 Focus shots are sufficient to initiate the nucleation of AlN. XRD results reveal that crystal growth of nitrides/oxides increases by increasing Focus shots (up to 30 Focus shots) and resputtering of the previously deposited film is taken place by further increase in Focus shots (40 Focus shots). Scanning electron microscopic (SEM) results indicate the uniform distribution of spherical grains (∼35 nm). A smoother surface is observed for 20 Focus shots at 0° angular position. SEM results also show a net-type microstructure (thread like features) of the sample treated for 30 Focus shots whereas rough surface morphology is observed for 40 Focus shots. Energy dispersive spectroscopic profiles show the distribution of different elements present in the deposited composite films. A typical microhardness value of the deposited composite films is 5255 ± 10 MPa for 10 grams imposed load which is 3.3 times than the microhardness values of unexposed sample. The microhardness values of the exposed samples increases with increasing Focus shots (up to 30 Focus shots) and decreases for 40 Focus shots treatment due to resputtering of the previously deposited composite film. The microhardness values of the composite films decreases by increasing the sample's angular position.     

Insights into sticking of radicals on surfaces for smart plasma nano-processing

In reactive plasma processing, species produced in the plasma reach the surface of a substrate and cause etching, deposition and surface modification through surface reactions. These reactions are characterized by the densities and energies of species incident on the surfaces. In order to realize nano-scale plasma processing, important species for plasma processing have been identified and characterized, and their behavior, not only in the gas phase, but also on the surface, have been clarified and controlled. One of the most critical parameters for insights into surface reaction kinetics of radicals is sticking and surface loss probability. On the basis of radical densities measured by various methods, the sticking and surface reaction loss probabilities have been compiled, and they enable the quantitative understanding of the kinetics of radicals on the surface in the plasma. In this article, the sticking and surface reaction loss probabilities measured thus far are reviewed focusing on fluorocarbon gas, silane gas and methane gas based plasma processes. The establishment of a smart plasma process and the development of an autonomous production device with control of radicals on the basis of insights into the surface reactions for nano-scale plasma processing are presented.     

Pressure-induced phase changes of cubic monoolein - Cytochrome C mesophases

Incorporation of the protein cytochrome c (cyt c) into the hydrated bicontinuous Ia3d cubic mesophase of monoolein (MO) was investigated within a wide range of pressures by small-angle X-ray scattering (SAXS). We found that incorporation of cyt c into the cubic phase of MO has a drastic effect on the structure and pressure stability of the system: At high pressures, the lipid systems with less than 0.2 wt.% embedded protein undergo a transition to a fluid lamellar phase with smaller partial molar lipid volume. Incorporation of cyt c at levels above 0.2 wt.% promotes the formation of a new cubic phase, probably a cubic micellar phase of space group P4₃32 (Q²¹²) whose pressure stability rises with increasing protein content.     

Pressure-induced transformation plasticity of H(2)O ice

Transformation plasticity is a deformation mechanism which occurs during phase transformation of an externally stressed material. Pressure-induced transformation plasticity of ice could be relevant to the geology of the moons of the outer solar system, and has long been postulated to occur in olivine in the earth's interior. In the present work, ice specimens were subjected to isostatic pressure cycling between 0 and 300 MPa to induce reversible polymorphic transformation between ice I and II at 230 K. When a small uniaxial compressive stress was applied during cycling, the specimens exhibited a compressive strain (as large as 18.5% after a single cycle) proportional to the applied stress, in agreement with observations and theory for transformation plasticity of metals induced by polymorphic thermal cycling.     

Express interferometry of dense plasma

An express method of diagnostics of a wide class of plasma objects (including dense plasma) with high spectral and spatial resolution is suggested, which allows measurement of spectral line widths comparable with the free spectral interval of a Fabry—Perot interferometer. The proposed method is characterized by sufficient accuracy even with considerable broadening of spectral lines. Kiev T. Shevchenko University, Ukraine. Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No.6, pp. 813–817, November–December, 1997.