Synthesis and microstructure of polymers from o-methacryloyloxybenzoic acid

The free radical polymerization of o-methacryloyloxybenzoic acid using acetone and benzene as solvents, in the interval 30–120°C, is investigated. The polymerization in benzene has a precipitant character. However, when acetone is used as solvent, at reaction temperatures higher than 60–70°C, the polymerization deviates from the classic free radical mechanism and, beside the addition of monomer molecules to growing chain ends, the release of salicylic acid and the formation of cyclic anhydride structures of glutaric type in the main chain has been detected. The microstructure of polymers obtained has also been studied by the transformation into the corresponding poly(methyl methacrylate)s.     

N‐Bromosuccinimide as a thermal iniferter for radical polymerization

N‐Bromosuccinimide (NBS) was used as a thermal iniferter for the initiation of the bulk polymerizations of methyl methacrylate, methyl acrylate, and styrene. The polymerizations showed the characteristics of a living polymerization: both the yields and the molecular weights of the resultant polymers increased linearly as the reaction time increased. The molecular weight distributions of the polymers were 1.42–1.95 under the studied conditions. The resultant polymers could be used as macroiniferters to reinitiate the polymerization of the second monomer. The copolymers poly(methyl methacrylate)‐b‐polystyrene and polystyrene‐b‐poly(methyl methacrylate) were obtained and characterized. End‐group analysis of the resultant poly(methyl methacrylate), poly(methyl acrylate), and polystyrene confirmed that NBS behaved as a thermal iniferter. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2567–2573, 2005     

Hydrophobic coatings from photochemically prepared hydrophilic polymethacrylates via electrospraying

Linear poly(hydroxyethyl methacrylate‐co‐methyl methacrylate) P(HEMA‐co‐MMA) and poly(dimehylaminoethyl methacrylate‐co‐methyl methacrylate) P(DMAEMA‐co‐MMA) and their corresponding hyperbranched copolymers were synthesized by conventional photoinitiated free radical polymerization and self‐condensing vinyl polymerization (SCVP) using Type I and Type II photoinitiators, respectively. Then, the polymers were processed by electrospraying in N, N‐dimethylformamide. The surface of the resulting electrospray coatings was examined by SEM, XPS, and WCA then compared with those prepared by drop casting. Regardless of the structural nature of the polymers, electrospraying allows the preparation of rough surface that shows more hydrophobic behavior. Electrospray coatings with linear and hyperbranched copolymers exhibited WCA as ～150° and ～130°, respectively, indicating that branching reduces the WCA. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1338–1344     

Ultrasonic Modification of Polymers. II. Degradation of Polystyrene,Substituted Polystyrene,and Poly(n-vinyl Carbazole) in the Presence of Flexible Chain Polymers

Abstract

Ultrasonic (20 kHz, 70 W) solution degradations of polystyrene, substituted polystyrenes, and poly(n-vinyl carbazole) have been carried in toluene and tetrahydrofuran at 27 and -20°C in the presence of flexible chain polymers. Polystyrene formed block copolymers at 27°C with stiff-chain polymer PVCz; however, in the presence of flexible chain polymers, e.g., poly(vinyl methyl ketone) or poly(vinyl methyl ether), there were no block copolymers formed. Poly(n-vinyl carbazole) does not seem to form any block copolymers at 27°C with flexible chain polymers, e.g., poly(octadecyl methacrylate) and poly(ethyl methacrylate). Poly(p-chlorostyrene) and poly(p-methoxystyrene) also do not form block copolymers at 27°C with poly(octadecyl methacrylate) but do so with poly(hexadecyl methacrylate). It is quite possible that these may only be blends of two homopolymers. Poly(octa-decyl methacrylate) does yield a block copolymer when sonicated at -15°C with poly(p-isopropyl α-methylstyrene).     

Dielectric relaxation studies of some linear crosslinked and branched polymers

Dielectric loss measurements are reported for polystyrene, crosslinked polystyrene, polyacrylamide, branched polyacrylamide, and poly(methyl methacrylate) at 1 and 10 kHz f over the temperature range ?85 to +100°C. Crosslinking and branching have a pronounced effect on the dielectric relaxation spectra of polymers. The methods of preparation of these polymers and their viscosity molecular weight data are also reported.     

Effect of temperature and solvents on stereospecific polymerization of vinyl alkyl ethers catalyzed by aluminum sulfate–sulfuric acid complex

The effect of polymerization temperature and solvents was determined on the crystallinity of polymers of vinyl isobutyl ether and of vinyl n-butyl ether prepared with aluminum sulfate–sulfuric acid complex catalyst. Principally, the methyl ethyl ketone (MEK)-insoluble fractions of these polymers were used for characterization. Density, per cent crystallinity by x-ray diffraction, infrared ratio, and dilatometric volume contraction of these polymer fractions were used as criteria of crystallinity. The MEK-insoluble fractions of poly(vinyl n-butyl ethers) prepared in carbon disulfide in the temperature range of ?30 to +25°C did not show any significant difference in the values of the above crystallinity parameters. The polymer obtained at 50°C. was less crystalline than the rest of the polymers. The MEK-insoluble fractions of poly(vinyl isobutyl ethers) prepared at 0–50°C. in carbon disulfide and n-heptane solvents also did not significantly differ in their degree of crystallinity. They were, however, decidedly less crystalline than the MEK-insoluble fractions of the corresponding polymers obtained at ?20°C. These data a indicate that on increasing the temperature of polymerization the crystallinity of the polymers was either unchanged or decreased slightly. The polymerizations of vinyl n-butyl ether and vinyl isobutyl ethers were also carried out in binary mixtures of carbon disulfide with n-heptane, chlorobenzene, and MEK. Generally, increasing the concentration of carbon disulfide increased the inherent viscosities of polymers as well as the weight percentage of their MEK-insoluble fractions. The MEK-insoluble fraction of poly(vinyl isobutyl ether) prepared in carbon disulfide-MEK mixture (volume ratio 2:1) was isotactic and highly crystalline. Likewise, the MEK-insoluble fractions of two polymers of vinyl n-butyl ether prepared in MEK itself were also isotactic and highly crystalline. Compared to poly(tetramethylene oxide), these latter fractions exhibited less dependence of rate of crystallization upon temperature. Consequently, at low degrees of supercooling they crystallize much more rapidly than does poly(tetramethylene oxide).     

Highly heterotactic polymerization of methacrylates — Higher order stereoregulation and stereochemical significance

A combination of tert-butyllithium (t-BuLi) and bis(2,6-di-t-butylphenoxy)methylaluminium (MeAI(ODBP)₂) was found to be an efficient initiator for heterotactic living polymerization of certain alkyl methacrylates in toluene at low temperatures. The polymerization of methyl methacrylate (MMA) with t-BuLi/MeAI(ODBP)₂ (AI/Li=5 mol/mol) in toluene at −78°C gave heterotactic-rich poly(methyl methacrylate) (PMMA) with narrow molecular weight distributions (MWDs) (heterotactic triad fraction mr = 68%, ratio of weight- to number-average molecular weights M̄w/M̄n = 1.06-1.17). Other alkyl methacrylates also gave heterotactic polymers under the same conditions; in particular, ethyl and butyl methacrylates gave polymers with heterotactic triad fractions of 87%. The highest triad heterotacticity of 91.6% was obtained for the polymerization of ethyl methacrylate at −95°C. Some characteristic features of this stereospecific polymerization were discussed based on the polymerization results combined with other structural information of the polymer such as chain-end stereostructure and stereosequence distribution in the main chain.     

Automated parallel anionic polymerizations: Enhancing the possibilities of a widely used technique in polymer synthesis

Anionic polymerization techniques have been implemented successfully in a commercial automated synthesizer. The main problems for a successful adaptation of the experimental technique in the automated synthesizer are addressed, as well as some simple potential applications, such as the anionic polymerization of styrene, isoprene, and methyl methacrylate. The obtained results were reproducible and in concordance with literature knowledge. The apparent rate constant of the anionic polymerization of styrene in cyclohexane initiated by sec‐butyllithium could be determined at two different concentrations of the monomer and initiator in a temperature range of 10–60 °C. All the synthesis and characterization experiments of the polymers were performed within a short time period. Moreover, the syntheses of poly(styrene‐b‐isoprene) and poly(styrene‐b‐methyl methacrylate) block copolymers were also successfully carried out within the automated synthesizer. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4151–4160, 2005     

Radical polymerization of various alkyl methacrylates in liquid crystalline solvents

The polymerization of methacrylates of methyl, ethyl, butyl, hexyl, octyl, dodecyl, and octadecyl alcohols was studied with 2,2′-azobisisobutyronitrile in the smectic, nematic, cholesteric, and isotropic liquid phases at 50–75°C. N-(4-Methoxyphenylmethylene)phenylamine, N-(4-ethoxyphenyl-methylene)-4-butylphenylamine, cholesteryl octadecanoate, and benzene were used as the solvents. The viscosities of the polymers were enhanced in the mesomorphic solvents. The polymer was converted to the corresponding poly(methyl methacrylate) through hydrolysis and esterification. Tacticities of the resultant poly(methyl methacrylates) were determined by nuclear magnetic resonance spectroscopy. The isotacticities of the polymers obtained in the smectic and the nematic phases were basically the same and appeared to be larger than those of the polymers in the cholesteric and isotropic liquid states. The polymerization of the methacrylates of butyl and longer-chain alcohols deviated from Bernoullian statistics and gave polymers more isotactic than those of methyl and ethyl methacrylates.     

Atom transfer radical polymerization of styrene and methyl methacrylate catalyzed by FeCl2/iminodiacetic acid

The atom transfer radical polymerization of styrene and methyl methacrylate with FeCl₂/iminodiacetic acid as the catalyst system in bulk was successfully implemented at 70 and 110 °C, respectively. The polymerization was controlled: the molecular weight of the resultant polymer was close to the calculated value, and the molecular weight distribution was relatively narrow (weight‐average molecular weight/number‐average molecular weight ∼ 1.5). Block copolymers of polystyrene‐b‐poly(methyl methacrylate) and poly(methyl methacrylate)‐b‐poly(methyl acrylate) were successfully synthesized, confirming the living nature of the polymerization. A small amount of water added to the reaction system increased the reaction rate and did not affect the living nature of the polymerization system. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4308–4314, 2000     

ATRP of methyl methacrylate initiated with a bifunctional initiator bearing bromomethyl functional groups: Synthesis of the block and graft copolymers

This article reports the synthesis of the block and graft copolymers using peroxygen‐containing poly(methyl methacrylate) (poly‐MMA) as a macroinitiator that was prepared from the atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) in the presence of bis(4,4′‐bromomethyl benzoyl peroxide) (BBP). The effects of reaction temperatures on the ATRP system were studied in detail. Kinetic studies were carried out to investigate controlled ATRP for BBP/CuBr/bpy initiating system with MMA at 40 °C and free radical polymerization of styrene (S) at 80 °C. The plots of ln ([M_o]/[M_t]) versus reaction time are linear, corresponding to first‐order kinetics. Poly‐MMA initiators were used in the bulk polymerization of S to obtain poly (MMA‐b‐S) block copolymers. Poly‐MMA initiators containing undecomposed peroygen groups were used for the graft copolymerization of polybutadiene (PBd) and natural rubber (RSS‐3) to obtain crosslinked poly (MMA‐g‐PBd) and poly(MMA‐g‐RSS‐3) graft copolymers. Swelling ratio values (q_v) of the graft copolymers in CHCl₃ were calculated. The characterizations of the polymers were achieved by Fourier‐transform infrared spectroscopy (FTIR), ¹H‐nuclear magnetic resonance (¹H NMR), gel‐permeation chromatography (GPC), differential scanning calorimetry (DSC), thermogravimetric analysis, scanning electron microscopy (SEM), transmission electron microscopy (TEM), atomic force microscopy (AFM), and the fractional precipitation (γ) techniques. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1364–1373, 2010     

Sodium hydride-initiated polymerizations of vinyl monomers in aprotic solvents

Polymerizations of several vinyl monomers at 25°C in aprotic solvents (dimethyl sulfoxide, N,N-dimethylacetamide, and hexamethylphosphoric triamide) using sodium hydride dispersion as initiator yield low to intermediate molecular weight polymers. The molecular weight of the resulting polymer as well as the mode of initiation depends on the monomer and aprotic solvent used. Initiation of polymerization of monomers with available α hydrogens (methyl acrylate, acrylonitrile) involves monomer anion, while initiation of a monomer with no α hydrogen (methyl methacrylate) proceeds by a more complex mechanism. In contrast, initiation of styrene and α-methylstyrene proceeds by dimsyl anion addition to monomer in dimethylsulfoxide. Although the triad tacticities and number-average molecular weights of poly(methyl methacrylate) samples obtained from all three aprotic solvents are nearly the same, poly(methyl methacrylates) prepared in dimethyl sulfoxide and N,N-dimethylacetamide give polymers having polydispersities of ～3, while a very polydisperse polymer is obtained in hexamethylphosphoric triamide.     

Kinetics of the γ-radiation-induced polymerization of methyl methacrylate in the solid state

Studies have been made of the γ-radiation-induced polymerization of methyl methacrylate in bulk, in the solid state at a temperature of ?65°C. and a radiation intensity of 346,000 rad/hr. The reaction was found to have an extremely long induction period (～50 hr.) when pure monomer was used, and to be first-order with respect to polymer concentration. This first-order dependency was confirmed by a series of irradiations in which 0.6% poly(methyl methacrylate) was dissolved in the monomer before irradiation. These irradiations showed no induction period. Nuclear magnetic resonance spectroscopy indicated a much more heterotactic polymer than that obtained in the liquid state at ?49°C.     

A cationic bridged zirconocene complex as the catalyst for the stereospecific polymerization of methyl methacrylate

The cationic bridged zirconocene complex [iPr(Cp)(Ind)Zr(Me)(THF)][BPh₄] ( 1 ‐BPh₄) was synthesized. Polymerization of methyl methacrylate with 1 ‐BPh₄ in CH₂Cl₂ at temperatures between –20 and 20°C led to the formation of isotactic poly(methyl methacrylate). The low polydispersity index of the polymer obtained and a successful two step polymerization of methyl methacrylate with 1 ‐BPh₄ are hints towards a living polymerization mechanism. ¹H and ¹³C NMR analysis revealed an enantiomorphic site‐controlled mechanism for the formation of isotactic poly(methyl methacrylate).     

Radical polymerization in the presence of peroxide and reducing agent monomer for branched polymers

In this article, we report the radical polymerization in the presence of peroxide and commercially available or designed reducing agent monomer (RAM) for the preparation of branched poly(methyl methacrylate)s (PMMAs). The reaction behavior of the RAM was studied by NMR. Triple‐detection SEC (TD‐SEC) analysis was used to confirm the branching structure of the prepared PMMAs and to investigate the influence of peroxide concentration and RAM concentration on molecular weight and branched structure. The obtained branched PMMAs exhibited high molecular weights and relatively narrow polydispersities at high conversion of MMA. Interestingly, a significant increase in molecular weight and degree of branching of the obtained polymers are observed in higher BPO concentration, these results are quite different from that reported in the literature. The unique radical polymerization mechanism in the RAM/BPO redox‐initiated radical polymerization system resulted in branched PMMAs with high molecular weights at relatively high RAM and BPO concentrations. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 833–840     

Polymeric Nitrofuran Derivatives. I. Radical-Initiated Homo- and Copolymerization of 5-Nitrofurfuryl Methacrylate

The radical homopolymerization of 5-nitrofurfuryl methacrylate (NFMA) and the copolymerization of NFMA with methyl methacrylate and various vinyl monomers, respectively, have been studied in dimethylformamide at 65°C. NFMA and poly(NFMA) have been characterized by ¹H-NMR, IR, and UV spectroscopy. The influence of polymerization conditions on monomer conversion and on the molecular weight of the polymers obtained has been investigated. The thermal behavior of the polymers obtained has been studied by TGA and DSC analysis.     

Polymerization of methyl methacrylate with ceric ion-methanol redox system

The polymerization of methyl methacrylate initiated by Ce⁴⁺ methanol redox system was studied in aqueous solution of nitric acid at 15°C. The polymerization was initiated by primary radicals formed from Ce⁴⁺/alcohol complex. Poly(methyl methacrylate) chains containing the alcohol residue were obtained. Variations in the temperatuare and concentration of the components of the redox system allowed the control of the rate of polymerization and molecular weight of the polymer. The concentration of the hydroxyl end groups in the poly(methyl methacrylate) of low molecular weight was determined by titration and by spectrometric method.     

Polymerization of adsorbed monolayers. III. Preliminary structure studies in dilute solution of the insertion polymers

Insertion poly(methyl acrylate) and poly(methyl methacrylate) were prepared from monomers adsorbed in monolayers on the surface of montmorillonite clay, both in the presence and in the absence of bifunctional crosslinkers (ethylene glycol dimethacrylate and tetramethylene glycol dimethacrylate). The insertion poly(methyl acrylate) and the crosslinked insertion poly(methyl methacrylate) and dilute-solution properties quite different from conventional polymers of these monomers, the differences including high light-scattering molecular weights combined with low viscosities, low values of the second virial coefficient, unusually large variations of the Huggins' constant k′ with the time-temperature history of the solutions, and low sedimentation velocities. These properties suggest that the insertion polymers have compact structures and are consistent with the postulate of sheetlike macromolecules. The dilute-solution properties of insertion poly(methyl methacrylate) made without crosslinker, unlike those of similarly prepared poly(methyl acrylate), were similar to those of conventional poly(methyl methacrylate). This difference in behavior is attributed to the different tendencies of the two monomers to undergo branching or crosslinking during radical polymerization.     

Synthesis of phosphate end‐functional polymers and application to thermally latent polymeric initiators

Novel phosphates, O‐p‐(hydroxymethyl)benzyl O,O‐diethyl phosphate ( 1 ) and O‐(2‐bromoisobutyryloxymethyl)benzyl O,O‐diethyl phosphate ( 2 ) were synthesized by the reaction of diethyl phosphorochloridate with 1,4‐benzenedimethanol and the successive reaction with 2‐bromoisobutyryl bromide in the presence of triethylamine and submitted to the polymerization of ?‐caprolactone and methyl methacrylate as the initiators. They afforded phosphate end‐functional poly(?‐caprolactone) and poly(methyl methacrylate) with controlled molecular weights and polydispersity ratios by living ring‐opening polymerization and samarium‐induced polymerization. The polymerization of glycidyl phenyl ether (GPE) was carried out with the phosphate end‐functional polymers as the latent polymeric initiators in the presence of ZnCl₂. The polymerization of GPE did not proceed below 90 °C, but it rapidly proceeded to afford poly(GPE) above the temperature. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3832–3840, 2001     

Homogeneous and multiphase poly(methyl methacrylate) graft polymers via the macromonomer method

Anionic and group transfer polymerization processes were used to synthesize controlled molecular weight methacryloyloxy functionalized poly(dimethylsiloxane) and poly(methyl methacrylate) macromonomers having a narrow molecular weight distribution and high percent functionality. These macromonomers were anionically copolymerized with methyl methacrylate (MMA) to afford poly(methyl methacrylate)-graft-poly(methyl methacrylate) (PMMA-g-PMMA) and poly(methyl methacrylate)-graft-poly(dimethylsiloxane) (PMMA-g-PDMS) polymers having not only narrow molecular weight distribution graft parts but also backbone parts. The PMMA-g-PDMS system was fractionated using supercritical chlorodifluoromethane to determine its chemical composition distribution (CCD). The CCD for the PMMA-g-PDMS copolymerized in a living manner was substantially more narrow than the free radically copolymerized material. The PMMA-g-PMMA system was used to study the dilute solution properties of branched homopolymers. The appropriateness of the universal calibration gel permeation chromatography (GPC) method for branched systems exhibiting long chain branching was reaffirmed.