Synthesis and polymerization of N-[N′-(α-methylbenzyl)aminocarbonyl-n-alkyl]maleimide

Two types of optically active N-[N′-(α-methylbenzyl)amino/carbonyl-n-alkyl]maleimides (MBAC) were synthesized from maleic anhydride, 6-amino-n-caproic acid (or 12-amino-n-dodecanoic acid), and (R)-(+)-α-methylbenzylamine. Radical homopolymerizations of MBAC were performed in several solvents at 60 and 110°C for 24 h to give optically active polymers. Radical copolymerizations of MBAC were performed with styrene (ST) and methyl methacrylate (MMA) in dioxane at 60°C. The monomer reactivity ratios and the Alfrey-Price Q-e values were determined. Chiroptical properties of the polymers and copolymers were investigated. © 1995 John Wiley & Sons, Inc.     

Synthesis and polymerization of N-[4-N′- (α-methylbenzyl)aminocarbonylphenyl]maleimide

A novel type of optically active N-[4-N′-(α-methylbenzyl)aminocarbonylphenyl]maleimide [(R)-MBCP] was synthesized from maleic anhydride, p-aminobenzoic acid, and (R)-methylbenzylamine. Radical homopolymerization of (R)-MBCP was performed in tetrahydrofuran (THF) at 50 and 70°C for 24 h to give optically active polymers having [α]²⁵_D = -141° and -129°, respectively. Anionic polymerization of (R)-MBCP with n-butyllithium in THF and N,N-dimethylformamide gave an optically active polymer having ?78 to ?81° of [α]²⁵_D. Radical copolymerizations of (R)-MBCP (M₁) were performed with styrene (ST, M₂) and methyl methacrylate (MMA, M₂) in THF at 50°C. The monomer reactivity ratios (r₁, r₂) and the Alfrey-Price Q-e values were determined as follows: r₁ = 0.009, r₂ = 0.091, Q₁ = 1.30, e₁ = 1.87 in the (R)-MBCP-ST; r₁ = 0.27, r₂ = 1.21, Q₁ = 0.93, e₁ = 1.46 in the (R)-MBCP-MMA system. Chiroptical properties of the polymers were also investigated. © 1992 John Wiley & Sons, Inc.     

Radiation-induced solid-state polymerization in binary systems. II. Relationship between polymerization rate and physical structure of binary systems

The radiation-induced solid-state polymerization of binary systems consisting of acrylic monomer (acrylamide, acrylic acid) and organic compounds was investigated. In the previous paper on binary systems the authors reported that the rate of polymerization increased in the solid state (eutectic mixture systems). The mechanism of rate increase has been investigated by examination of phase diagrams, viscosities, and surface tension of the binary systems. Viscosity and surface tension are the measure of the molecular interaction of the two-component systems. In addition, the effect of linear crystal growth rate and half maximum width of the x-ray diffraction diagram of the crystallization process were determined. The larger the molecular interaction between the two components, the slower the linear crystal growth rate of monomer. The size of the monomer crystal decreases and the dislocation density of the monomer crystals increases in systems with large molecular interaction. Consequently it can be concluded that the physical structure of a binary solid system is the most important parameter determining the rate increase of solid-state polymerization. Dislocation on the grain boundary is more important than defects inside of the crystal lattice. It was found that the acceleration of polymerization rate is large in binary systems with larger molecular interaction. In some systems such as organic acid—amide systems with strong hydrogen bonds, glassy phases may be formed in which monomer may readily polymerize at very low temperatures.     

Cationic polymerization of γ-methyl- and α-methylphenylallene

The cationic polymerizations of γ-methylphenylallene ( 1 ) and α-methylphenylallene ( 2 ) were carried out with some Lewis acids at 25 and 0°C in dichloromethane to obtain the corresponding polymers through allyl cations, respectively. Tin (IV) chloride was found to be an effective catalyst for the cationic polymerization of both allenes 1 and 2 compared with other Lewis acids. Thus, in the polymerization of 1 , methanol-insoluble polymer was only obtained using Tin (IV) chloride, and M?_n of methanol-insoluble polymer obtained by Tin (IV) chloride was the highest in the polymerization of 2 . From the analysis of ¹H- and ¹³C-NMR spectra of the obtained polymers, the polymer from 1 consisted of two kinds of units polymerized by each double bonds of allene 1 , whereas the polymer from 2 consisted of only one unit polymerized by terminal double bond of allene 2 . Moreover, effect of solvent on the cationic polymerizations of 1 and 2 were discussed.     

γ-Ray-induced polymerization of α-haloacrylic acids

The γ-ray induced polymerizations of α-chloroacrylic acid, mp 66°C, and α-bromo-acrylic acid, mp 72°C, were investigated in the temperature range from 35°C to 85°C. An analysis of polymerization kinetics was made, and results were similar to those reported in the literature for other vinyl monomers. On heating of the polymer obtained, elimination of hydrogen halide takes place, and intramolecular lactone formation is observed. The rate of lactone formation of poly(α-chloroacrylic acid) obtained in the solid-state polymerization was found to be higher than that in the liquid state, because a highly isotactic configuration of polymers, tends to be formed in the solid-state polymerization, and elimination of hydrogen chloride is facilitated with an isotactic 5₂ helix structure.     

Radiation-induced solid-state polymerization in binary systems. IV. Solid-state polymerization in the glassy phase

The radiation-induced polymerization of glass-forming systems containing monomers has been investigated. It was found that irradiation below the second-order transition temperature T_g of the systems causes no in-source polymerization but causes a rapid postpolymerization on warming above the T_g after initial irradiation below the T_g. The post-polymerization was followed by differential thermal analysis and ESR spectra. It is caused above the T_g by the release of peroxy radicals trapped below the T_g, and its rate is proportional to the irradiation dose to some extent, often is explosively high, and brings about a remarkably large temperature rise by accumulation of polymerization heat. Irradiation above the T_g causes rapid in-source polymerization which is accelerated by the high viscosity of the monomeric system between T_g and T_s (WLF temperature) compared to crystal or ordinary solution polymerization. The temperature dependence of the in-source polymerization of glassy systems shows a peak between the T_g and T_s which may be the result of competing effects of the rate increase by the decreased termination near T_s and the rate decrease by the decreased propagation caused by the diffusion prevented near the T_g. The degree of polymerization was also investigated. The temperature dependence of the degree of polymerization of the polymers obtained by in-source polymerization shows a peak similar to that of the temperature dependence of conversion. Unusually large values of the Huggins constant k' are noted between T_g and T_s. The degree of polymerization of the polymer obtained by post-polymerized increases with the increase of irradiation dose and the polymerization rate; this may be the result of decreased chain transfer to nonpolymerizable components.     

Synthese von diastereo- und enantio-selektiv deuterierten β,ε-, β,β-, β,γ- und γ,γ-Carotinen

Synthesis of Diastereo- and Enantioselectively Deuterated β,ε-, β,β-, β,γ- and γ,γ-Carotenes We describe the synthesis of (1′R, 6′S)-[16′, 16′, 16′-²H₃]-β, εcarotene, (1R, 1′R)-[16, 16, 16, 16′, 16′, 16′-²H₆]-β, β-carotene, (1′R, 6′S)-[16′, 16′, 16′-²H₃]-γ, γ-carotene and (1R, 1′R, 6S, 6′S)-[16, 16, 16, 16′, 16′, 16′-²H₆]-γ, γ-carotene by a multistep degradation of (4R, 5S, 10S)-[18, 18, 18-²H₃]-didehydroabietane to optically active deuterated β-, ε- and γ-C₁₁-endgroups and subsequent building up according to schemes \documentclass{article}\pagestyle{empty}\begin{document}${\rm C}_{11} \to {\rm C}_{14}^{C_{\mathop {26}\limits_ \to }} \to {\rm C}_{40} $\end{document} and C₁₁ → C₁₄; C₁₄+C₁₂+C₁₄→C₄₀. NMR.- and chiroptical data allow the identification of the geminal methyl groups in all these compounds. The optical activity of all-(E)-[²H₆]-β,β-carotene, which is solely due to the isotopically different substituent not directly attached to the chiral centres, is demonstrated by a significant CD.-effect at low temperature. Therefore, if an enzymatic cyclization of [17, 17, 17, 17′, 17′, 17′-²H₆]lycopine can be achieved, the steric course of the cyclization step would be derivable from NMR.- and CD.-spectra with very small samples of the isolated cyclic carotenes. A general scheme for the possible course of the cyclization steps is presented.     

Radical copolymerization of maleimide with ethyl α‐ethylacrylate and α‐ethylacrylic acid via RAFT

The copolymerization of maleimide (MI) with α‐ethylacrylic acid (EAA) and with ethyl α‐ethylacrylate (EEA) in the presence of 2‐phenylprop‐2‐yl dithiobenzoate (PPDB) was investigated. The copolymerization of MI and EAA was difficult to conduct with the reversible addition–fragmentation chain transfer (RAFT) mechanism because reinitiation of expelled radicals by fragmentation chain transfer was inhibited by the association of EAA in polar solvent and the strong interaction of the imino of MI with the carboxyl of EAA between the propagation chains. When the carboxylic group of EAA was esterified, then the copolymerization went well via RAFT, and alternating copolymers with controlled molecular weight were obtained. Combining by electron spin resonance showed a different result. It was found that before 30% of the comonomer conversion had occurred, the copolymer poly(EEA‐co‐MI) showed increasing molecular weight with the conversion and a rather narrow molecular weight distribution; then the molecular weight of the copolymer began to retard. This phenomenon of retardation was aggravated at high temperature. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3828–3835, 2004     

Synthesis and polymerization of γ-alkoxy-β-hydroxypropyl acrylates

Several γ-alkoxy-β-hydroxypropyl acrylates were synthesized and polymerized. Both poly(MHPA) (IV_d) and poly(MHPMA) (IV_a) hydrogels possess high values of equilibrium water content, about seven and three times, respectively, that of the poly(β-hydroxyethyl methacrylate) hydrogel. These rather high values are attributed tentatively to the presence of a hydrophilic γ-methoxy-β-hydroxypropyl side group on the acrylic backbone.     

γ- And δ-lycorane

Hydrogenation of -anhydrodihydrocaranine (V) or anhydrocaranine (VII) with Adams catalyst in acetic acid or the Hauptmann reduction of -dihydrocaranone (XX) yielded (—)γ-lycorane (XVII). Catalytic reduction of β-anhydrodihydrocaranine (IX) with palladium-carbon in ethanol gave (+)γ-lycorane (XVIII), while with Adams catalyst in acetic acid it afforded (+)δ-lycorane (XIX) along with (—)β-lycorane (III). Reduction of anhydrocaranine in ethanol gave (±)γ-lycorane which was also obtained by hydrogenation of anhydrolycorine (X). Based on these findings, the configurational structures of -, β-, γ- and δ-lycorane were established and the configuration of dihydrolycorine was confirmed.     

γ-ray and ultraviolet graft copolymerization of maleimide by vapor-phase method

Graft copolymerization of maleimide onto ethyl cellulose and polyethylene films by using its sublimation vapor was carried out under γ- or ultraviolet irradiation. When polyethylene film was used as a backbone polymer the grafting reaction proceeded without a perceptible sorption of monomer, while a considerable amount of monomer was captured into ethyl cellulose film and grafting of the sorbed monomer was observed. The monomer seemed to be monomolecularly dispersed in this film. The presence of air retarded the reaction. The grafted films were characterized by strong infrared absorption bands due to polymaleimide branching. The fractions assigned to the graft copolymer were isolated from the grafted films by selective elution. The grafted branches were supposed to be very short, judging from the polymaleimide contents of those fractions.     

Cationic polymerization of β-pinene,styrene and α-methylstyrene

Molecular weight distributions determined by gel permeation chromatography demonstrate that α-methylstyrene copolymerizes with both β-pinene and styrene, forming both bi- and terpolymers. The composition of precipitated polymer versus crude polymer, as determined by nuclear magnetic resonance, suggests that β-pinene and styrene also copolymerize. Extraction of the latter bipolymer of β-pinene and styrene with acetone gives only a small amount of insoluble β-pinene homopolymer, confirming that β-pinene and styrene copolymerize in m-xylene. GPC analysis shows that each copolymer contains some homopolymer. A comparison of M _n with molecular weight calculated from NMR analysis, assuming chain transfer to solvent, indicates that chain transfer is the predominant method of forming dead polymer. The carbonium ions of the growing chain tend to transfer to solvent with increasing ease in the order β-pinene, styrene, and α-methylstyrene.     

Lipase-catalyzed ring-opening polymerization of α-methyl-δ-valerolactone and α-methyl-ε-caprolactone

Lipase-catalyzed ring-opening polymerization of α-methyl-substituted medium-size lactones, α-methyl-δ-valerolactone and α-methyl-ε-caprolactone, were carried in bulk. Immobilized lipase derived from Candida antarctica is active in the polymerization of both monomers. The polymerization proceeds under mild reaction conditions to give the corresponding aliphatic polyester having a hydroxy group at one end and a carboxylic acid group at the other.     

Solid-state polymerization of maleimide by 2,2′-azobisisobutyronitrile

The solid-state polymerization of maleimide by 2,2′-azobisisobutyronitrile was studied over the temperature range 65–85°C. The polymerization was carried out either by heating the solid mixture of maleimide and 2,2′-azobisisobutyronitrile or by heating the two compounds separately in twin ampules. The results of the kinetic study showed that the lifetime of the propagating radicals was short and that the rate of termination was proportional to the mole amount of propagating radicals. The ESR spectrum showed that stable radicals that were not main propagating radicals were in the polymerizing system.     

Anionic-initiated polymerization of β-nitrostyrenes

β-Nitrostyrene and many of its derivatives have been shown to yield high polymers via anionic initiation with alkoxide ions in protic solvents, e.g., alcohols. A study was conducted to determine the effect of certain substituents on the polymerization characteristics of representative monomers of this series and the properties of their polymers. A kinetic study was conducted and the relative rates of propagation were unexpectedly found to correlate well with brown's σ⁺ values. The rates of initiation of two representative monomers, β-nitrostyrene and p-methoxy-β-nitrostyrene, with sodium ethoxide were found to be 3.51 and 2.86 liter/mole sec, respectively. The rate of chain transfer in ethanol was studied qualitatively by using gel-permeation chromatography (GPC) to obtain molecular weight distribution (MWD) curves. The low values of the M _w/M _n ratios indicated little chain transfer in the protic solvent.     

Cationic polymerization of β-pinene

β-Pinene was polymerized with cationic initiators in reactions that were carried out to study the solvent, temperature, initiator, and monomer-to-solvent ratio. Polymers obtained under different conditions were characterized by intrinsic viscosity, softening point, and gel permeation chromatography.