Formation of carbon nanotubes from a silicon carbide/carbon composite

The reaction of a SiC/C composite powder in an arcing plasma forms carbon nanotubes in good yield. Besides carbon nanotubes, a Si/C composite composed of β SiC covered with a shell of graphite is formed. The graphitic carbon surface layers of the carbon shell of this composite reacts further to form carbon nanotubes when heated to 600 °C. This process seems highly effective since only a small overall low weight loss, indicative for a complete carbon shell oxidation is observed by thermal analysis. The formation of the carbon nanotubes from SiC is unlikely since no SiO₂ has been found when heating the SiC/C core shell composite to its reaction temperature of 600 °C under O₂. The CNTs formed are of good quality with 3 to 6 concentric walls and high aspect ratio. Occasionally even single walled carbon naotubes have been observed.     

Direct synthesis of aligned silicon carbide nanowires from the silicon substrates

Aligned silicon carbide nanowires were synthesized directly from the silicon substrates via a novel catalytic reaction with a methane-hydrogen mixture at 1,100 degrees C, with a mean diameter of 40 nm and length of 500 microm; they consist of a single-crystalline zinc blende structure crystal in the [111] growth direction; X-ray diffraction, Raman, and infrared spectroscopy confirm the synthesis of high-purity silicon carbide nanowires.     

氮掺杂碳纳米管包覆碳化硅作为不含金属的催化剂(英文)

A hierarchical metal-free catalyst consisting of nitrogen-doped carbon nanotubes decorated onto a silicon carbide (N-CNTs/SiC) macroscopic host structure was prepared. The influence of N-CNTs incorporation on the physical properties of the support was evaluated using different characterization techniques. The catalyst was tested as a metal-free catalyst in the selective oxidation of H2S and steam-free dehydrogenation of ethylbenzene. The N-CNTs/SiC catalyst exhibited extremely good desulfurization performance compared to a Fe2O3/SiC catalyst under less conducive reaction conditions such as low temperature, high space velocity, and a low O2-to-H2S molar ratio. For the dehy-drogenation of ethylbenzene, a higher dehydrogenation activity was obtained with the N-CNTs/SiC catalyst compared to a commercial K-Fe/Al2O3 catalyst. The N-CNTs/SiC catalyst also displayed good stability as a function of time on stream for both reactions, which was attributed to the strong anchoring of the nitrogen dopant in the carbon matrix. The extrudate shape of the SiC support allowed the direct macroscopic shaping of the catalyst for use in a conventional fixed-bed reactor without the problems of catalyst handling, transportation, and pressure drop across the catalyst bed that are encountered with nanoscopic carbon-based catalysts.     

Formation of aluminacyclobutenes via carbon monoxide and isocyanide insertion

Reaction of LAl[eta2-(CSiMe3)2] (L = HC[(CMe)(NAr)]2, Ar = 2,6-iPr2C6H3) with carbon monoxide and tert-butyl isocyanide afforded unique AlC3 aluminacyclobutenes via insertion into one of the aluminium-carbon bonds.     

Thermodynamic and experimental study of the interaction of silicon and carbon monoxide: Synthesis of silicon carbide nanofibers

The reaction of crystalline silicon with carbon monoxide to produce silicon carbide was studied. Thermodynamic simulation of the equilibrium phase composition of the nSi-mCO system was carried out in the range 300–2000 K (27–1727°C). Conditions required for silicon carbide was carried out applying various experimental modes (n, m, and T) and possible pathways of the reactions were determined. Interaction between crystalline silicon and carbon monoxide formation in a temperature range of 1000–1450°C. The order of the reaction in CO was found to be close to unity. Silicon carbide nanofibers with thicknesses of from 5 to 100 nm were synthesized and characterized by powder X-ray diffraction, mass-spectral elemental analysis, and scanning electron microscopy. A possibility of synthesizing high-purity silicon carbide fibers were experimentally evaluated.     

Formation of Pd/Au nanostructures from Pd nanowires via galvanic replacement reaction

Bimetallic nanostructures with non-random metal atoms distribution are very important for various applications. To synthesize such structures via benign wet chemistry approach remains challenging. This paper reports a synthesis of a Au/Pd alloy nanostructure through the galvanic replacement reaction between Pd ultrathin nanowires (2.4 +/- 0.2 nm in width, over 30 nm in length) and AuCl3 in toluene. Both morphological and structural changes were monitored during the reaction up to 10 h. Continuous changes of chemical composition and crystalline structure from Pd nanowires to Pd68Au32 and Pd45Au55 alloys, and to Au nanoparticles were observed. More interestingly, by using combined techniques such as high-resolution transmission electron microscopy (HRTEM), X-ray diffraction (XRD), energy dispersive X-ray spectrometry (EDS), UV-vis absorption, and extended X-ray absorption fine structure (EXAFS) spectroscopy, we found the formation of Pd68Au32 non-random alloy with Au-rich core and Pd-rich shell, and random Pd45Au55 alloy with uniformly mixed Pd and Au atom inside the nanoparticles, respectively. Density functional theory (DFT) calculations indicated that alkylamine will strongly stabilize Pd to the surface, resulting in diffusion of Au atoms into the core region to form a non-random alloy. We believe such benign synthetic techniques can also enable the large scale preparation of various types of non-random alloys for several technically important catalysis applications.     

Ordered mesoporous silicon carbide (OM-SiC) via polymer precursor nanocasting

Ordered mesoporous SiC with high specific surface area (650-800 m(2) g(-1)) and well ordered pore structure was obtained via nanocasting of polycarbosilanes into SBA-15 and subsequent conversion of the polymer at 1300 degrees C.     

Functionalization of single-walled carbon nanotubes via the Bingel reaction

Single-walled carbon nanotubes have been cyclopropanated under Bingel reaction conditions, and the functionalized nanotubes have been characterized by atomic force microscopy using "chemical tagging" techniques.     

Chemical-assisted thermal disproportionation of porous silicon monoxide into silicon-based multicomponent systems

Under the surface: Ag nanoparticles are deposited onto the surface of commercially available SiO particles, and subsequent chemical etching results in the formation of nanoporous SiO without changing the chemical and physical properties of the original SiO. Moreover, chemical-assisted thermal annealing produces a shape-preserving Si-based multicomponent system, which exhibits high-performance electrochemical properties.     

Release of N(2) from the carbon nanotubes via high-temperature annealing

Nitrogen (N)-doped carbon nanotubes (CNTs) were heated to 1000 degrees C under an ultrahigh vacuum. X-ray photoelectron spectroscopy (XPS) and X-ray absorption near-edge structure (XANES) reveal three different N structures; graphitelike, pyridine-like, and molecular N(2). The vibrationally resolved XANES peaks of N(2) were first observed, suggesting the existence of molecular N(2) as intercalated and trapped forms. The annealing process can decrease the average N content from 6.3 at. % to 3.3 at. %, mainly by releasing molecular N(2). Electron energy-loss spectroscopy (EELS) confirms that the annealing releases molecular N(2) from the CNTs.     

Binuclear iron(II) complex from a linked-bis(amidinate) ligand: synthesis and its reaction with carbon monoxide

Binuclear iron(II) complexes supported by a cyclohexane-linked bis(amidinate) ligand have been isolated and structurally characterized.     

Crystalline silicon carbide nanoparticles encapsulated in branched wavelike carbon nanotubes: synthesis and optical properties

A novel nanostructure, cubic silicon carbide (3C-SiC) nanoparticles encapsulated in branched wavelike carbon nanotubes have been prepared by a reaction of 1,2-dimenthoxyethane (CH3OCH2CH2OCH3), SiCl4, and Mg in an autoclave at 600 degrees C. According to X-ray powder diffraction, the products are composed of 3C-SiC and carbon. TEM and HRTEM images show that the as-synthesized products are composed of 3C-SiC nanoparticles encapsulated in branched carbon nanotubes with wavelike walls. The diameter of the 3C-SiC cores is approximately 20-40 nm and the thickness of the carbon shells is about 3-5 nm. In Raman scattering spectroscopy, both the TO (Gamma) phonon line and the LO (Gamma) phonon line have red shifts about 6 cm(-1) relative to that for the bulk 3C-SiC. The photoluminescence (PL) spectrum shows that there are two emission peaks: blue light emission (431 nm) and violet light emission (414 nm). A sequential deposition growth process (with cores as the templates for the shells) for the nanostructure was proposed.     

The reaction of carbon monoxide with platinum ylids

The platinum(II) ylids [X₂Pt{CH(py)CH₂CH₃}(py)] (X = Cl, Br; PY = pyridine) react with carbon monoxide to give the platinum carbonyls [CO(X₂)Pt{CH(py)CH₂CH₂CH₃}] which lose CO on heating or in solution. The platinum(IV) ylids [Cl₄Pt{CH(py)CH₂CH₃}(py)] and[Cl₂I(CH₃)Pt{CH(py)CH₂CH₃}(py)] also react with CO to give Pt(CO)-ylid compounds.     

Preparation and characterization of silicon monoxide/graphite/carbon nanotubes composite as anode for lithium-ion batteries

Silicon monoxide/graphite/multi-walled carbon nanotubes (SiO/G/CNTs) material was prepared by ball milling followed by chemical vapor deposition method and characterized by X-ray diffraction, scanning electron microscopy (SEM), galvanostatic charge–discharge, and AC impedance spectroscopy, respectively. The results revealed that SiO/G/CNTs exhibited an initial specific discharge capacity of 790 mAh g⁻¹ with a columbic efficiency of 65%. After 100 cycles, a high reversible capacity of 495 mAh g⁻¹ is still retained. The improved electrochemical properties were due to beneficial SEI by the SEM and EIS results.     

Solution-liquid-solid (SLS) growth of silicon nanowires

Here we report the solution-liquid-solid (SLS) synthesis of silicon (Si) nanowires. Nanowires are grown by trisilane (Si3H8) decomposition in a high boiling solvent, octacosane (C28H58) or squalane (C30H62), in the presence of either Au or Bi nanocrystals. To our knowledge, this is the first report of a colloidal synthetic route carried out in a solvent at atmospheric pressure that provides crystalline Si nanowires in large quantities.     

Catalytic performance of iron carbide for carbon monoxide hydrogenation

Novel iron carbide and potassium-promoted iron carbide catalysts were prepared and investigated for CO hydrogenation. The iron carbide showed high activity for CO hydrogenation under high pressures; with the addition of potassium, activity and selectivity to C5+ hydrocarbons were greatly enhanced, and the selectivity to methane was suppressed.     

Decoration carbon nanotubes with Pd and Ru nanocrystals via an inorganic reaction route in supercritical carbon dioxide-methanol solution

This work describes a method to decorate carbon nanotubes (CNTs) with metallic Pd and Ru nanocrystals via inorganic reactions in supercritical (SC) CO2-methanol solutions. In this route, PdCl2 or RuCl3.3H2O dissolved in SC CO2-methanol solution acted as a metal precursor and CNTs functioned as a template to direct the deposition of produced nanoparticles. Methanol served as the reductant for the precursors as well as cosolvent to enhance the dissolution of precursors in SC CO2. Dry products were readily obtained through in situ extraction with SC CO2 after reactions. The products were characterized by X-ray diffraction, X-ray photoelectron spectroscopy, and transmission electron microscopy. It was demonstrated that the loading content and particle size of the nanoparticles deposited on CNTs could be tuned by changing the weight ratio of the precursor to CNTs. This simple and efficient approach may also be utilized to synthesize other high-purity materials using inorganic salt precursors in SC CO2-based solution.