透明材料的表面改性与防雾防霜性

介绍了透明材料表面防雾防霜的几种基本原理及其具体实施办法。综述国内外以防雾防霜为目的的表面改性的研究及其进展。尤其针对透明树脂表面改性 ,作了深入的讨论 ,并提出了自己的解决办法。     

透明超疏水材料的研究进展

超疏水表面在包括自清洁、防腐、防冰和流体输送过程中的减阻等许多领域都有广泛应用,透明的超疏水表面更是在太阳能光伏电池板和其他光学领域具有自我清洁的潜在应用。本文首先介绍了透明超疏水的相关理论,然后概括了制备超疏水表面常见的方法,重点归纳总结了用于构建粗糙度的不同物质,如SiO2、 TiO2 等,并分析了其优缺点;最后,简单介绍了透明超疏水的应用前景,并对其研究方向进行了展望。     

材料表面的润湿性

近年来,固体表面的润湿性因其在实际生活中的广泛应用前景而引起人们极大关注。本文就固体表面几种典型的润湿性模型及过渡态理论的最新研究成果,对超亲水材料、超疏水材料的构筑方法、影响因素、应用前景及研究现状做了简明扼要的介绍。最后对超亲水、超疏水材料的研究与发展方向作了展望。     

羧基丙烯酸酯涂料合成及其防雾性能研究

采用种子乳液聚合法合成了一种互穿网络型羧基丙烯酸酯类聚物乳液，研究了加料方式对羧基分布的影响，结果表明丙烯酸加入到核单体中有利于羧基分布在乳胶粒表面。在体系中引入离子键交联结构提高了乳液涂料的硬度和耐水性能，离子键交联ＰＩＬＮ型涂料具有优良的防雾性能。     

仿生沉积法制备水下低气体黏附透明材料

透明材料常用于水下设备中,而聚合物透明材料多较为疏水,在水下易黏附气泡,影响其光学性能.利用多巴胺(DA)和聚乙烯亚胺(PEI)共沉积技术,在多种透明聚合物材料表面构建了亲水/水下超疏气涂层.结果表明,聚多巴胺(PDA)与PEI可通过Michael加成或Schiff碱反应在此类材料表面形成亲水交联网络,显著提高其表面亲水性.表现为水接触角显著降低,而水下气接触角显著提高(140?),气泡在材料表面的黏附力显著下降.沉积时间在6 h以下时,XPS和椭圆偏振测试的结果表明,虽然所选用的透明材料表面沉积量和沉积厚度随时间有所上升,但其透光性不会受到显著影响.该方法具有较强的普适性,可用于多种水下气体黏附性较强的透明高分子材料,如聚苯乙烯(PS)、聚对苯二甲酸乙二醇酯(PET)、聚甲基丙烯酸甲酯(PMMA)、聚丙烯(PP)和聚酰亚胺(PI)等.同时,该方法形成的涂层的长期稳定性也较好,材料在水中浸泡振荡10天之后仍能保持较好的抗气泡黏附能力.该方法适用于如潜水艇舷窗、护目镜、水下光学镜头及其防护罩等水下设备中.     

亲水性有机硅杂化防雾涂料的制备及性能

采用Sol-Gel技术制备了二乙醇胺/有机硅杂化涂料, 并用FTIR、UV-Vis、AFM、TGA及接触角等测试技术对涂料及其涂层进行了分析表征. 结果表明, 该杂化涂料具有良好的成膜性. 由于膜层中存在大量的亲水性羟基基团, 使膜层具有良好的亲水性能和防雾效果. 固化后的聚合物膜层中无机相形成了三维交联网络, 赋予了膜层优异的耐磨性和热稳定性.     

海藻糖改性聚乙烯醇及其防雾/防霜涂层

以聚乙烯醇和羧基化海藻糖为原料合成了聚乙烯醇-g-海藻糖(PVA-g-Tre), 将接枝物与少量乙二醇二甲基丙烯酸酯混合, 通过光引发聚合制备了亲水性半互穿网络防雾/防霜涂层. 通过核磁共振氢谱和傅里叶变换红外光谱对PVA-g-Tre的化学结构进行了表征, 利用原子力显微镜、 水接触角测试仪、 拉曼光谱等分析了涂层表面的粗糙度、 润湿性及水与大分子之间的氢键作用, 并考察了涂层的透光性和防雾及防霜性能. 结果表明, 含有不同海藻糖接枝率PVA-g-Tre的涂层表面粗糙度较低且透光率好, 与含有PVA的涂层相比, 引入海藻糖提高了PVA-g-Tre涂层的亲水性和润湿性, 使其同时具有良好的防雾和防霜性能.     

超浸润油水分离材料的研究进展

海洋石油泄露和工业废水违规排放造成了严重的环境和生态污染。近年来,受荷叶、水黾、鲨鱼等动植物组织结构的启发,超浸润材料的设计与开发成为当前研究的热点之一,在油水分离领域展现出十分重要的实际应用价值。本文首先介绍了表面浸润性的基本理论,然后综述了近年来包括超疏水型、超亲水型、Janus型以及功能型超浸润油水分离材料的研究进展,最后总结了目前该领域存在的一些问题,并指出利用简单环保的方法开发出低成本、耐久性和高效分离能力的超浸润油水分离材料将会是该领域的主要发展方向。     

透明超疏水材料的制备及其应用

超疏水材料由于其独特的非浸润性引起人们的广泛关注,近年来得到迅猛发展,各种适用于不同领域的功能性超疏水表面应运而生。其中,透明超疏水材料因其在光学领域的特殊贡献受到人们的青睐。透明疏水涂层技术对于实际应用具有重要的意义,透明涂层不仅可以满足光学器件防护的高透光率,还可以维持防护本体的基本外观,在自清洁、防污、防冰防雾、防腐蚀等领域都展示出广阔的应用前景。本文系统地阐述了超疏水表面以及其中功能性的透明超疏水表面的最新进展、表面的设计、制造和重要应用。尽管已经取得了重大进展,但是目前超疏水材料在耐久性方面还存在诸多问题,例如,容易被机械外力破坏、极端环境下表面的超疏水性质不稳定以及老化等问题,限制了透明疏水涂层技术的大范围应用。在未来的研究中,一方面继续丰富相关的理论知识,为透明疏水涂层技术的应用提供更多的理论支持,另一方面,提高涂层的透明度和机械耐久性能仍是未来研究的重中之重。     

A Facile Strategy to Construct Anti-Swelling,Antibacterial, and Antifogging Coatings for Protection of Medical Goggles

During the COVID-19 (Corona Virus Disease 2019) pandemic, traditional medical goggles are not only easy to attach bacteria and viruses in long-term exposure, but easy to fogged up, which increases the risk of infection and affects productivity. Bacterial adhesion and fog can be significantly inhibited through the hydrogel coatings, owing to super hydrophilic properties. On the one hand, hydrogel coatings are easy to absorb water and swell in wet environment, resulting in reduced mechanical properties, even peeling off. On the other hand, the hydrogel coatings don't have intrinsic antibacterial properties, which still poses a potential risk of bacterial transmission. Herein, an anti-swelling and antibacterial hydrogel coating is synthesized by 2-hydroxyethyl methacrylate (HEMA), acrylamide (AM), dimethylaminoethyl acrylate bromoethane (IL-Br), and poly(sodium-p-styrenesulfonate) (PSS). Due to the self-driven entropy reduction effect of polycation and polyanion, an ion cross-linking network is formed, which endows the hydrogel coating with excellent antiswelling performance. Moreover, because of the synergistic effect of highly hydrated surfaces and the active bactericidal effect from quaternary ammonium cations, the hydrogel coating exhibits outstanding antifouling performances. This work develops a facile strategy to fabricate anti-swelling, antifouling, and antifogging hydrogel coatings for the protection of medical goggles, and also for biomedical and marine antifouling fields.     

钝化与光催化双功能薄膜在玻璃防结雾中的应用

在大气环境中玻璃表面会吸附有机污染物分子 ,导致表面上水接触角 (θ)增大。当θ大于 5～ 1 0°时 ,在一定条件下就会发生结雾现象。在分析大气中玻璃表面 (包括有涂层的玻璃表面 )的θ值随时间的变化规律的基础上 ,进行了用钝化和光催化双功能无机氧化物薄膜涂层防止玻璃表面结雾的应用研究。     

The Cyclodextrins as Modelling Agents of Drug Controlled Release

The controlled release of nicardipine (NC) was achieved by hybridizing its hydrophilic and hydrophobic cyclodextrin (CDs) complexes, i.e., those with hydroxypropyl--cyclodextrin (HPCD) andtriacetyl--cyclodextrin (TACD),respectively. ¹H-nuclearmagnetic resonance (¹H-NMR) was performed to examine the interaction between both CDs and NC in solution. The solid complexes of NC : HPCD and NC : TACD were prepared, in a 1 : 1 molar ratio by the spray-drying method. Complexation in the solid state was demonstrated by differential scanning calorimetry (DSC) and powder X-ray diffractometry. In vitro dissolution studies were carried out in simulated gastric (pH 1.2) and intestinal (pH 6.8) fluids, according to the USP basket method. The ¹H-NMR studies provided clear evidence of an interaction between the CDs and the aromatic rings of NC. The DSC thermograms of the solid complexes showed no endothermic peak due to NC melting and their diffraction pattern was completely diffuse, which suggested the formation of a novel type solid phase with an amorphous character. The low dissolution rate of NC, a weak basic drug, in alkaline medium was significantly improved by complexation with HPCD. In contrast, the in vitro release of this drug from the NC : TACD complexes was markedly retarded in both dissolution media. An optimal formulation was then designed by the combination, in different molar ratios, of these two complexes. The release behavior of these preparations was investigated and it was observed that the retarding effect was dependent on the amount of the NC : TACD complex. In addition, the initial release rate became faster as the molar ratio of the NC : HPCD complex increased.     

The use of hydrophilic groups in aqueous organic reactions

The representative examples of beneficial effects of hydrophilic groups in aqueous organic reactions are described, including the Diels-Alder reactions, hetero Diels-Alder reactions, Claisen rearrangement, radical reactions, and transition metal-catalyzed reactions. Although the low solubility of organic molecules in water has been a bane in aqueous organic reactions, the incorporation of hydrophilic groups into the substrate structure can overcome the solubility problem and at the same time enhance the hydrophobic effect. In some cases, interesting micellar effects are observed because of the amphiphilic natures of such molecules. The emerging concept of "removable hydrophilic group," in which the solubility problems have been alleviated, yet the initial product can still be transformed into a variety of products with the removal of the hydrophilic groups, is also described.     

Swelling and drug releasing properties of poly(N-isopropylacrylamide) thermo-sensitive copolymer gels

A series of N-isopropylacrylamide (NIPAAm) copolymer gels with different hydrophilicities were prepared from NIPAAm, hydrophilic acrylamide (AAm) and hydrophobic butyl methacrylate (BMA). The swelling and thermo-responsive properties of PNIPAAm P (NIPAm-co-BMA) and P(NIPAm-co-AAm) copolymer hydrogels were investigated. The drug loading and releasing behaviors for two kinds of model drug with different hydrophilicities were studied. The result shows that the copolymer gels present negative thermo-sensitivities. The lower critical solution temperature (LCST), equilibrium swelling degree and the initial swelling rate increase as the hydrophilicity of gels increases when the temperature is below the LCST. With increasing gel hydrophilicity the loading ratio for sodium salicylate increases, while for salicylic acid, the reverse is observed. The initial drug releasing rate of sodium salicylate and salicylic acid also increase with increasing gel hydrophilicity. The initial drug releasing rate of sodium salicylate is significantly higher than that of salicylic acid. For salicylic acid which is less hydrophilic, the equilibrium releasing ratio at high temperature is lower than that at low temperature while for sodium salicylate which is more hydrophilic, the equilibrium releasing ratio at high temperature is almost the same as that at low temperature. Equilibrium releasing ratios of the three gels are significantly different from each other for salicylic acid when the temperature is below LCST while the equilibrium releasing ratios of the three gels are all 100% for sodium salicylate. __________ Translated from Journal of Central South University (Science and Technology), 2007, 38(5): 906–911 [译自: 中南大学学报(自然科学版)]     

High-Performance Heterogeneous Thermocatalysis Caused by Catalyst Wettability Regulation

Catalyst wettability regulation has emerged as an attractive approach for high catalytic performance for the past few years. By introducing appropriate wettability, the molecule diffusion of reactants and products can be enhanced, leading to high activity. Besides this, undesired molecules are isolated for high selectivity of target products and long-term stability of catalyst. Herein, we summarize wettability-induced high-performance heterogeneous thermocatalysis in recent years, including hydrophilicity, hydrophobicity, hybrid hydrophilicity-hydrophobicity, amphiphilicity, and superaerophilicity. Relevant reactions are further classified and described according to the reason for the performance improvement. It should be pointed out that studies of utilizing superaerophilicity to improve heterogeneous thermocatalytic performance have been included for the first time, so this is a comparatively comprehensive review in this field as yet.     

Simultaneous study of interfacial tension,surface tension,and viscosity of few surfactant solutions with survismeter

Surfaces and interfaces are receptive valuable significant property of chemical molecules due to their potential to develop several phenomena in a self‐controlled mechanism. Science of surfaces is vast and is being used industrially since time immemorial. Their accurate and simultaneous estimation is necessary; therefore, the survismeter was used for measuring them along with viscosity. Individually tensiometers, X‐ray reflective microscope, and viscometers are used for surface tension, interfacial tension, and viscosity, respectively. These devices are sophisticated, expensive, and individually consume much time and resources with poor reproducibility in measurements. Survismeter is an alternative device for similar measurements together with higher accuracies and reproducibility. It works on a principle of capillary flow and pressure gradient (PG) inside liquid‐holding and air‐filled bulbs. Several liquids have been used for study with ± 0.01 mN/m, ± 0.01 mN/m and ± 1 × 10^?5 N s/m² accuracies in respective data. Copyright © 2008 John Wiley & Sons, Ltd.