功能化离子液体催化碳-杂键形成反应

离子液体独特的溶剂性能使它在合成和催化领域得到了广泛的应用。然而,离子液体的经济问题和可能的环境友好性问题使得人们逐渐把目光投向了离子液体自身的催化性能。人们通过对离子液体结构的修饰设计出了各种具有特定催化性能的功能化离子液体。近年来功能化离子液体在催化碳-杂键形成反应方面有了相当多的应用。本文以形成的碳-杂原子键类型为主线,综述了功能化离子液体在催化碳-杂键形成反应方面的最新研究进展,涉及到了酸性离子液体、碱性离子液体、金属有机功能化离子液体、酸碱双功能离子液体、手性离子液体等多种类型的功能化离子液体。     

果糖在酸性离子液体中脱水制备5-羟甲基糠醛

制备了多种离子液体,并将其作为催化剂和溶剂催化果糖脱水制备5-羟甲基糠醛（HMF）。 制备的酸性离子液体包括磺酸基功能化酸性离子液体、咪唑类酸性离子液体和吡啶类酸性离子液体。 利用核磁共振仪和红外光谱仪对离子液体的结构进行表征。 利用紫外可见光分光光度计结合Hammett指示剂计算Hammett酸度函数,比较了酸强度的大小对反应的影响。 结果表明,离子液体的酸强度对反应有较大影响,在无其它催化剂和溶剂的情况下,离子液体具有较高的催化活性,通过使用1-丁基-3-甲基咪唑氯盐(BmimCl)作为催化剂,当反应温度为120 ℃,反应进行到4 h时,HMF收率可以达到74.97%。     

离子液体在羰基化反应中的应用

离子液体由于具有良好的溶解能力、配位能力、热及化学稳定性、结构及性质可调、环境友好等特点,被认为是传统非环保型、有毒、污染严重的溶剂和催化剂潜在的替代品,已被广泛应用于有机合成及催化领域。本文综述了近年来离子液体在羰基化反应中的应用及催化反应机理研究进展,包括烯烃、醇类化合物、芳烃、胺/胺醇、卤代芳烃及甲醛的羰基化反应,羰基源主要包括CO、CO₂和碳酸二甲酯,涉及到了酸性离子液体、碱性离子液体、金属类离子液体、负载型离子液体等多种类型的功能化及非功能化离子液体。在上述反应中离子液体不仅可以提高反应活性和选择性,而且简化了催化剂分离过程,在部分反应中实现了回收和循环使用。并对羰基化反应的发展及应用前景进行了展望。     

功能离子液体杂化固相纳米材料的制备及催化应用

离子液体是一种新颖的软功能材料,它既可以作为催化反应的绿色介质,也可以作为催化反应的活性组分,还可以作为一种客体的催化功能分子来修饰一些固相纳米材料。本文主要立足于多相催化材料的设计合成和应用的角度,结合近几年来一些新颖的固相纳米材料,系统地综述了功能离子液体对这些固相材料的杂化方法及其在催化应用中表现出的一些独特的催化性能。最后,对功能离子液体杂化固相纳米材料的研究现状进行了总结,并对将来可能的发展方向进行了展望。     

功能化的离子液体在电化学中的应用

离子液体独特的全离子结构无疑会导致良好的导电性,成为有潜力的绿色电化学材料。功能化是实现离子液体专一性的重要手段。本文综述了近几年功能化的离子液体在电化学研究中的进展,内容包括阴离子功能化、阳离子功能化和离子液体固相化。作者还对离子液体结构与离子电导率、电势窗口、稳定性和溶解能力的关系提出了一些看法。     

离子液体固载型功能材料的应用研究进展

随着人们对生物质能源和绿色清洁化学过程越来越重视,离子液体因其稳定性、低粘度和高电导率等优良性能,成为20世纪90年代初研究团队广泛关注的一类新型绿色溶剂,对其研究内容和应用领域也日趋完善和丰富,特别是在催化反应、电化学、材料化学以及生物质的前处理等领域的发展.对于离子液体的应用研究主要存在着用量庞大、价格昂贵、催化剂不易分离和提纯过程烦琐等缺陷.所以,近年来许多学者尝试通过吸附或者接枝固载化的方法,将离子液体固载于无机多孔材料或者有机高分子材料上,把离子液体的特性转移到多相固体催化剂上,可应用于固定床连续化、封闭化反应.本文对离子液体固载技术的诞生及发展做了详细地梳理,并将离子液体固载技术的应用领域做了多角度地总结,根据离子液体类型的不同,主要是作为催化剂应用于反应催化领域;根据固态载体的不同,主要是作为功能材料应用于吸附分离领域.     

新型苯并噻唑离子液体的合成及其催化蓖麻油酸酯化研究

以价格低廉的苯并噻唑为原料,合成了4种新型功能化布朗斯特酸性离子液体:苯并噻唑硫酸氢盐([HBth]-HSO_4)、苯并噻唑磷酸二氢盐([HBth]H_2PO_4)、苯并噻唑高氯酸盐([HBth]ClO_4)、苯并噻唑硝酸盐([HBth]NO_3),其结构经FT-IR、HRMS、NMR表征得到确认.考察了4种酸性离子液体在蓖麻油酸和乙二醇丁醚(EGBE)酯化反应中的催化活性,并与以浓硫酸为催化剂的催化体系相对照.结果表明:当n(蓖麻油酸)∶n(乙二醇丁醚)=1∶1.15,离子液体催化剂用量为蓖麻油酸重量的2%,反应温度90℃,反应时间5 h,酯化率可达98.8%,离子液体催化剂经真空干燥重复使用10次后,仍具有较高的催化活性.还考察了以苯并噻唑硫酸氢盐为催化剂催化合成系列蓖麻油酸二元醇醚酯和短链脂肪酸酯,也获得了较高的酯化率,且离子液体均能与酯产物自动分相.与传统硫酸催化酯化相比,此类离子液体催化酯化具有生产成本低、过程清洁、使用周期长等优点,完全可以替代传统浓硫酸催化蓖麻油酸酯化反应.     

离子液体固载化及应用研究

离子液体固载化是将离子液体通过物理吸附或化学键合的方法负载到不同的载体上,得到一种新型固体材料,兼具了离子液体与载体的特征,能够显著提升离子液体的利用率,解决离子液体黏度大、传质及分离困难等问题,拓展了离子液体的应用领域。本文根据不同的载体类型,综述了近年来离子液体固载化的研究进展及应用情况,总结了不同载体的优缺点及现阶段研究和应用发展中存在的一些问题,并对固载化离子液体的应用前景进行了展望。     

双酸位SO_4~(2-)/ZrO_2-SiO_2固载离子液体催化剂的构筑及性能

采用一步共缩合-水热法合成酸性载体SO_4~(2-)/ZrO_2-SiO_2,化学法接枝酸性离子液体磺酸功能化咪唑硫酸氢盐([Ps-im]HSO4),构筑拥有Br觟nsted与Lewis双酸位的离子液体固载型催化剂SO_4~(2-)/ZrO_2-SiO_2-IL。采用X射线衍射、傅里叶红外、N2吸附-脱附、X射线光电子能谱、热重以及透射电镜对催化剂的结构进行表征,结果表明:锆原子和酸性结构SO42-被成功引入纯硅材料,所合成的载体具有一定酸性;离子液体成功固载于酸性介孔材料SO_4~(2-)/ZrO_2-SiO_2,且固载后的催化剂保持其介孔结构。以大豆油和甲醇的酯交换反应为探针,考察了SO_4~(2-)/ZrO_2-SiO_2-IL催化剂的催化性能。在反应温度为150℃、反应时间为4 h、催化剂量5%(w/w)、醇油物质的量之比为24∶1的反应条件下,生物柴油的收率超过92%,且回收利用5次后,生物柴油的收率仍达86%。     

离子液体催化CO_2和环氧化合物的研究进展

离子液体是一类新型的催化CO_2环加成反应的催化剂,因其具有结构可设计性、催化活性高、绿色高效等优点而被广泛应用于催化合成环状碳酸酯.本文主要综述了近几年来各种常规型离子液体及功能化离子液体对CO_2和环氧化合物反应的催化性能的研究进展,其中常规型离子液体主要有咪唑类、季铵盐、季鏻盐、吡啶类等离子液体,而功能化离子液体包括氨基功能化、羟基功能化、羧基功能化、氨基酸类等离子液体.同时对各类离子液体催化CO_2与环氧化合物合成环状碳酸酯的研究中存在的问题进行了分析,并对其应用前景进行了展望.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.