Dioxygen activation in methane monooxygenase: a theoretical study

Using broken-symmetry unrestricted Density Functional Theory, the mechanism of enzymatic dioxygen activation by the hydroxylase component of soluble methane monooxygenase (MMOH) is determined to atomic detail. After a thorough examination of mechanistic alternatives, an optimal pathway was identified. The diiron(II) state H(red) reacts with dioxygen to give a ferromagnetically coupled diiron(II,III) H(superoxo) structure, which undergoes intersystem crossing to the antiferromagnetic surface and affords H(peroxo), a symmetric diiron(III) unit with a nonplanar mu-eta(2):eta(2)-O(2)(2)(-) binding mode. Homolytic cleavage of the O-O bond yields the catalytically competent intermediate Q, which has a di (mu-oxo)diiron(IV) core. A carboxylate shift involving Glu243 is essential to the formation of the symmetric H(peroxo) and Q structures. Both thermodynamic and kinetic features agree well with experimental data, and computed spin-exchange coupling constants are in accord with spectroscopic values. Evidence is presented for pH-independent decay of H(red) and H(peroxo). Key electron-transfer steps that occur in the course of generating Q from H(red) are also detailed and interpreted. In contrast to prior theoretical studies, a requisite large model has been employed, electron spins and couplings have been treated in a quantitative manner, potential energy surfaces have been extensively explored, and quantitative total energies have been determined along the reaction pathway.     

Mechanistic studies on the formation and reactivity of dioxygen adducts of diiron complexes supported by sterically hindered carboxylates

Dioxygen activation by enzymes such as methane monooxygenase, ribonucleotide reductase, and fatty acid desaturases occurs at a nonheme diiron active site supported by two histidines and four carboxylates, typically involving a (peroxo)diiron(III,III) intermediate in an early step of the catalytic cycle. Biomimetic tetracarboxylatodiiron(II,II) complexes with the familiar "paddlewheel" topology comprising sterically bulky o-dixylylbenzoate ligands with pyridine, 1-methylimidazole, or THF at apical sites readily react with O(2) to afford thermally labile peroxo intermediates that can be trapped and characterized spectroscopically at low temperatures (193 K). Cryogenic stopped-flow kinetic analysis of O(2) adduct formation carried out for the three complexes reveals that dioxygen binds to the diiron(II,II) center with concentration dependences and activation parameters indicative of a direct associative pathway. The pyridine and 1-methylimidazole intermediates decay by self-decomposition. However, the THF intermediate decays much faster by oxygen transfer to added PPh(3), the kinetics of which has been studied with double mixing experiments in a cryogenic stopped-flow apparatus. The results show that the decay of the THF intermediate is kinetically controlled by the dissociation of a THF ligand, a conclusion supported by the observation of saturation kinetic behavior with respect to PPh(3), inhibition by added THF, and invariant saturation rate constants for the oxidation of various phosphines. It is proposed that the proximity of the reducing substrate to the peroxide ligand on the diiron coordination sphere facilitates the oxygen-atom transfer. This unique investigation of the reaction of an O(2) adduct of a biomimetic tetracarboxylatodiiron(II,II) complex provides a synthetic precedent for understanding the electrophilic reactivity of like adducts in the active sties of nonheme diiron enzymes.     

Structure, electronic configuration, and Mössbauer spectral parameters of an antiferromagnetic Fe2-peroxo intermediate of methane monooxygenase

Determining structures of reaction intermediates is crucial for understanding catalytic cycles of metalloenzymes. However, short life times or experimental difficulties have prevented obtaining such structures for many enzymes of interest. We report geometric and electronic structures of a peroxo intermediate in the catalytic cycle of methane monooxygenase hydroxylase (MMOH) for which there is no crystallographic characterization. The structure was predicted via spin density functional theory using (57)Fe M?ssbauer spectral parameters as a reference. Computed isomer shifts (δ(Fe) = +0.68, +0.66 mm s(-1)) and quadrupole splittings (ΔE(Q) = -1.49, -1.48 mm s(-1)) for the predicted structure are in excellent agreement with experimental values of a peroxo MMOH intermediate. Predicted peroxo to iron charge transfer bands agree with UV-Vis spectroscopy. Peroxide binds in a cis μ-1,2 fashion and plays a dominant role in the active site's electronic structure. This induces a ferromagnetic to antiferromagnetic transition of the diiron core weakening the O-O bond in preparation for cleavage in subsequent steps of the catalytic cycle.     

Hydroxylation of methane by non-heme diiron enzymes: molecular orbital analysis of C-H bond activation by reactive intermediate Q

The electronic structures of key species involved in methane hydroxylation performed by the hydroxylase component of soluble methane monooxygenase (sMMO), as proposed previously on the basis of high-level density functional theory, were investigated. The reaction starts with initial approach of methane at one of the bridging oxo atoms in intermediate Q, a di(mu-oxo)diiron(IV) unit. This step is accompanied by a proton-coupled outer-sphere transfer of the first electron from a C-H sigma-bond in methane to one of the metal centers. The second electron transfer, also an outer-sphere electron transfer process, occurs along a two-component reaction pathway. Both redox reactions are strongly coupled to structural distortions of the diiron core. The electronic consequence and driving force of these distortions are intuitively explained by using the computed Kohn-Sham orbitals in the broken-symmetry framework to incorporate the experimentally observed antiferromagnetic coupling of the unpaired electrons at the metal centers. The broken-symmetry orbital scheme is essential for describing the C-H bond activation process in a consistent and complete manner, enabling derivation of both an intuitive and quantitative understanding of the most salient electronic features that govern the details of the hydroxylation.     

A non-radical mechanism for methane hydroxylation at the diiron active site of soluble methane monooxygenase

We propose a non‐radical mechanism for the conversion of methane into methanol by soluble methane monooxygenase (sMMO), the active site of which involves a diiron active center. We assume the active site of the MMOH_Q intermediate, exhibiting direct reactivity with the methane substrate, to be a bis(μ‐oxo)diiron(IV ) complex in which one of the iron atoms is coordinatively unsaturated (five‐coordinate). Is it reasonable for such a diiron complex to be formed in the catalytic reaction of sMMO? The answer to this important question is positive from the viewpoint of energetics in density functional theory (DFT) calculations. Our model thus has a vacant coordination site for substrate methane. If MMOH_Q involves a coordinatively unsaturated iron atom at the active center, methane is effectively converted into methanol in the broken‐symmetry singlet state by a non‐radical mechanism; in the first step a methane C? H bond is dissociated via a four‐centered transition state (TS1) resulting in an important intermediate involving a hydroxo ligand and a methyl ligand, and in the second step the binding of the methyl ligand and the hydroxo ligand through a three‐centered transition state (TS2) results in the formation of a methanol complex. This mechanism is essentially identical to that of the methane–methanol conversion by the bare FeO⁺ complex and relevant transition metal–oxo complexes in the gas phase. Neither radical species nor ionic species are involved in this mechanism. We look in detail at kinetic isotope effects (KIEs) for H atom abstraction from methane on the basis of transition state theory with Wigner tunneling corrections.     

Substrate‐Dependent H/D Kinetic Isotope Effects and the Role of the Di(μ‐oxo)diiron(IV) Core in Soluble Methane Monooxygenase: A Theoretical Study

Soluble methane monooxygenase (sMMO) is an enzyme that converts alkanes to alcohols using a di(μ‐oxo)diiron(IV) intermediate Q at the active site. Very large kinetic isotope effects (KIEs) indicative of significant tunneling are observed for the hydrogen transfer (H‐transfer) of CH₄ and CH₃CN; however, a relatively small KIE is observed for CH₃NO₂. The detailed mechanism of the enzymatic H‐transfer responsible for the diverse range of KIEs is not yet fully understood. In this study, variational transition‐state theory including the multidimensional tunneling approximation is used to calculate rate constants to predict KIEs based on the quantum‐mechanically generated intrinsic reaction coordinates of the H‐transfer by the di(μ‐oxo)diiron(IV) complex. The results of our study reveal that the role of the di(μ‐oxo)diiron(IV) core and the H‐transfer mechanism are dependent on the substrate. For CH₄, substrate binding induces an electron transfer from the oxygen to one Fe^IV center, which in turn makes the μ‐O ligand more electrophilic and assists the H‐transfer by abstracting an electron from the C?H σ orbital. For CH₃CN, the reduction of Fe^IV to Fe^III occurs gradually with substrate binding and H‐transfer. The charge density and electrophilicity of the μ‐O ligand hardly change upon substrate binding; however, for CH₃NO₂, there seems to be no electron movement from μ‐O to Fe^IV during the H‐transfer. Thus, the μ‐O ligand appears to abstract a proton without an electron from the C?H σ orbital. The calculated KIEs for CH₄, CH₃CN, and CH₃NO₂ are 24.4, 49.0, and 8.27, respectively, at 293 K, in remarkably good agreement with the experimental values. This study reveals that diverse KIE values originate mainly from tunneling to the same di(μ‐oxo)diiron(IV) core for all substrates, and demonstrate that the reaction dynamics are essential for reproducing experimental results and understanding the role of the diiron core for methane oxidation in sMMO.     

Hydroxylation mechanism of methane and its derivatives over designed methane monooxygenase model with peroxo dizinc core

The peroxo dizinc Zn(2)O(2) complex Q coordinated by imidazole and carboxylate groups for each Zn center has been designed to model the hydroxylase component of methane monooxygenase (MMO) enzyme, on the basis of the experimentally available structure information of enzyme with divalent zinc ion and the MMO with Fe(2)O(2) core. The reaction mechanism for the hydroxylation of methane and its derivatives catalyzed by Q has been investigated at the B3LYP*/cc-pVTZ, Lanl2tz level in protein solution environment. These hydroxylation reactions proceed via a radical-rebound mechanism, with the rate-determining step of the C-H bond cleavage. This radical-rebound reaction mechanism is analogous to the experimentally available MMOs with diamond Fe(2)O(2) core accompanied by a coordinate number of six for the hydroxylation of methane. The rate constants for the hydroxylation of substrates catalyzed by Q increase along CH(4) < CH(3)F < CH(3)CN ≈ CH(3)NO(2) < CH(3)CH(3). Both the activation strain ΔE(≠)(strain) and the stabilizing interaction ΔE(≠)(int) jointly affect the activation energy ΔE(≠). For the C-H cleavage of substrate CH(3)X, with the decrease of steric shielding for the substituted CH(3)X (X = F > H > CH(3) > NO(2) > CN) attacking the O center in Q, the activation strain ΔE(≠)(strain) decreases, whereas the stabilizing interaction ΔE(≠)(int) increases. It is predicted that the MMO with peroxo dizinc Zn(2)O(2) core should be a promising catalyst for the hydroxylation of methane and its derivatives.     

Direct chlorination of alcohols with chlorodimethylsilane catalyzed by a gallium trichloride/tartrate system under neutral conditions

The reaction of secondary alcohols 1 with chlorodimethylsilane (HSiMe(2)Cl) proceeded in the presence of a catalytic amount of GaCl(3)/diethyl tartrate to give the corresponding organic chlorides 3. In the catalytic cycle, the reaction of diethyl tartrate 4a with HSiMe(2)Cl 2 gives the chlorosilyl ether 5 with generation of H(2). Alcohol-exchange between the formed chlorosilyl ether 5 and the substrate alcohol 1 affords alkoxychlorosilane 6, which reacts with catalytic GaCl(3) to give the chlorinated product 3. The moderate Lewis acidity of GaCl(3) facilitates chlorination. Strong Lewis acids did not give product due to excessive affinity for the oxy-functionalities. Although tertiary alcohols were chlorinated by this system even in the absence of diethyl tartrate, certain alcohols that are less likely to give carbocationic species were effectively chlorinated using the GaCl(3)/diethyl tartrate system.     

Mechanistic aspects of vanadium catalysed oxidations with peroxides

The enhancement of the reactivity of peroxides, particularly hydrogen peroxide and alkylhydroperoxides, in the presence of vanadium catalysis is a very well known process. The catalytic effect is determined by the formation of an intermediate whose nature depends on the peroxides used and on its interaction with the metal precursor, high-valent peroxo vanadium species being usually the reactive oxidants. During the last decades the mechanistic details for several types of oxidation reactions have been elucidated. Interestingly, in a number of cases theoretical calculations offered support to the proposed reaction pathways.In general, V(V) peroxo species behave as electrophilic oxygen transfer reagents thus reacting preferentially with the more nucleophilic functional group present in the molecule. In several instances the chemoselectivity observed in such processes is very high when not absolute. As far as vanadium peroxides are concerned, a radical oxidative reactivity toward alkanes and aromatics has been also observed; also for this latter chemistry, diverse research groups studied in detail the mechanism. On the other hand, no clear-cut evidence of nucleophilic reactivity of vanadium peroxo complexes has been obtained.Here we collect a selection of recent achievements concerning the reaction mechanisms in the vanadium catalysed oxidation and bromination reactions with peroxides.     

Theoretical models of X–H bonds breaking (X = C,O, and H) over metal surfaces: Used for simulation of catalytic methane steam reforming

A short review of the works where theoretical models for describing kinetics of catalytic X–H bonds breaking reactions (X = C, O, and H) over metal surfaces were developed on the basis of concepts of the Dogonadze–Kuznetsov–Levich quantum mechanical theory of chemical processes. Numerical values of the rate constants of these reactions over (111) surfaces of nickel, platinum and rhodium, which are considered as steps of a complex catalytic process of methane steam reforming (MSR) are calculated and compared with experimental data. These rate constants are used for simulations of microkinetic models of the MSR reactions on the catalysts. Effects of external parameters on the MSR rates and on isotope effects are described.     

Insights into the different dioxygen activation pathways of methane and toluene monooxygenase hydroxylases

The methane and toluene monooxygenase hydroxylases (MMOH and TMOH, respectively) have almost identical active sites, yet the physical and chemical properties of their oxygenated intermediates, designated P*, H(peroxo), Q, and Q* in MMOH and ToMOH(peroxo) in a subclass of TMOH, ToMOH, are substantially different. We review and compare the structural differences in the vicinity of the active sites of these enzymes and discuss which changes could give rise to the different behavior of H(peroxo) and Q. In particular, analysis of multiple crystal structures reveals that T213 in MMOH and the analogous T201 in TMOH, located in the immediate vicinity of the active site, have different rotatory configurations. We study the rotational energy profiles of these threonine residues with the use of molecular mechanics (MM) and quantum mechanics/molecular mechanics (QM/MM) computational methods and put forward a hypothesis according to which T213 and T201 play an important role in the formation of different types of peroxodiiron(III) species in MMOH and ToMOH. The hypothesis is indirectly supported by the QM/MM calculations of the peroxodiiron(III) models of ToMOH and the theoretically computed Mo?ssbauer spectra. It also helps explain the formation of two distinct peroxodiiron(III) species in the T201S mutant of ToMOH. Additionally, a role for the ToMOD regulatory protein, which is essential for intermediate formation and protein functioning in the ToMO system, is advanced. We find that the low quadrupole splitting parameter in the Mo?ssbauer spectrum observed for a ToMOH(peroxo) intermediate can be explained by protonation of the peroxo moiety, possibly stabilized by the T201 residue. Finally, similarities between the oxygen activation mechanisms of the monooxygenases and cytochrome P450 are discussed.     

A mechanistic study of the reaction between a diiron(II) complex [FeII(2)(mu-OH)2(6-Me3-TPA)2](2+) and O2 to form a diiron(III) peroxo complex

A kinetic study of the reaction between a diiron(II) complex [Fe(II)(2)(mu-OH)(2)(6-Me(3)-TPA)(2)](2+) 1, where 6-Me(3)-TPA = tris(6-methyl-2-pyridylmethyl)amine, and dioxygen is presented. A diiron(III) peroxo complex [Fe(III)(2)(mu-O)(mu-O(2))(6-Me(3)-TPA)(2)](2+) 2 forms quantitatively in dichloromethane at temperatures from -80 to -40 degrees C. The reaction is first order in [Fe(II)(2)] and [O(2)], with the activation parameters DeltaH(double dagger) = 17 +/- 2 kJ mol(-1) and DeltaS(double dagger) = -175 +/- 20 J mol(-1) K(-1). The reaction rate is not significantly influenced by the addition of H(2)O or D(2)O. The reaction proceeds faster in more polar solvents (acetone and acetonitrile), but the yield of 2 is not quantitative in these solvents. Complex 1 reacts with NO at a rate about 10(3) faster than with O(2). The mechanistic analysis suggests an associative rate-limiting step for the oxygenation of 1, similar to that for stearoyl-ACP Delta(9)-desaturase, but distinct from the probable dissociative pathway of methane monoxygenase. An eta(1)-superoxo Fe(II)Fe(III) species is a likely steady-state intermediate during the oxygenation of complex 1.     

Stopped-flow Fourier transform infrared spectroscopy of nitromethane oxidation by the diiron(IV) intermediate of methane monooxygenase

The hydroxylase component (MMOH) of soluble methane monooxygenase from Methylococcus capsulatus (Bath) was reduced to the diiron(II) form and then allowed to react with dioxygen to generate the diiron(IV) intermediate Q in the first phase of a double-mixing stopped-flow experiment. CD3NO2 was then introduced in the second phase of the experiment, which was carried out in D2O at 25 degrees C. The kinetics of the reaction of the substrate with Q were monitored by stopped-flow Fourier transform infrared spectroscopy, observing the disappearance of the asymmetric NO2 bending vibration at 1548 cm-1. The data were fit to a single-exponential function, which yielded a kobs of 0.45 +/- 0.07 s-1. This result is in quantitative agreement with a kobs of 0.39 +/- 0.01 s-1 obtained by observing the disappearance of Q by double-mixing stopped-flow optical spectroscopy at its absorption maximum of 420 nm. These results provide for the first time direct monitoring of the hydroxylation of a methane-derived substrate in the MMOH reaction pathway and demonstrate that Q decay occurs concomitantly with substrate consumption.     

Contrasting copper-dioxygen chemistry arising from alike tridentate alkyltriamine copper(I) complexes

Copper(I)-dioxygen interactions are of great interest due to their role in biological O2-processing as well as their importance in industrial oxidation processes. We describe here the study of systems which lead to new insights concerning the factors which govern Cu(II)-mu-eta2:eta2 (side-on) peroxo versus Cu(III)-bis-mu-oxo species formation. Drastic differences in O2-reactivity of Cu(I) complexes which differ only by a single -CH3 versus -H substituent on the central amine of the tridentate ligands employed are observed. [Cu(MeAN)]B(C6F5)4 (1) (MeAN = N,N,N',N',N'-pentamethyl-dipropylenetriamine) reacts with O2 at -80 degrees C to form almost exclusively the side-on peroxo complex [{CuII(MeAN)}2(O2)]2+ (3) in CH2Cl2, tetrahydrofuran, acetone, and diethyl ether solvents, as characterized by UV-vis and resonance Raman spectroscopies. In sharp contrast, [Cu(AN)]B(C6F5)4 (2) (AN = 3, 3'-iminobis(N,N-dimethyl-propylamine) can support either Cu2O2 structures in a strongly solvent-dependent manner. Extreme behavior is observed in CH2Cl2 solvent, where 1 reacts with O2 giving 3, while 2 forms exclusively the bis-mu-oxo species [{CuIII(AN)}2(O)2]2+ (4Oxo). Stopped-flow kinetics measurements also reveal significant variations in the oxygenation reactions of 1 versus 2, including the observations that 4Oxo forms much faster than does 3; the former decomposes quickly, while the latter is quite stable at 193 K. The solvent-dependence of the bis-mu-oxo versus side-on peroxo preference observed for 2 is opposite to that reported for other known copper(I) complexes; the factors which may be responsible for the unusual behavior of 1/O2 versus 2/O2 (possibly N-H hydrogen bonding in the AN chemistry) are suggested. The factors which affect bis-mu-oxo versus side-on peroxo formation continue to be of interest.     

气相质子转移反应中热化学和动力学的关系

质子键合的分子簇的离子－分子反应中的热化学和动力学关系的考察结果表明：对于非烷基锁闭的分子簇,如（C2H5OH）nH＋（5＝1-3）和（CH3OH）3H＋;与中性碱B的质子转移反应,属快速反应,其反应效率r是由总反应的自由能变化△γGm控制,而与反应过渡态的本质无关。那些反应可能存在两个中间体,因电子转移导致质子从分子簇内部转移到中性碱,进而导致二个或三个溶剂分子的直接蒸发;烷基锁闭的质子键合的二聚体,如（CH3CN）2H＋,（CH3OCH3）2H＋,（CH3COCH3）2H＋和（C3COOCH3）2H＋,与中性碱的质子转移反应,其效率远小于1;与总反应的△γGm无关     

Lewis Acid Coupled Electron Transfer of Metal–Oxygen Intermediates

Redox‐inactive metal ions and Brønsted acids that function as Lewis acids play pivotal roles in modulating the redox reactivity of metal–oxygen intermediates, such as metal–oxo and metal–peroxo complexes. The mechanisms of the oxidative C?H bond cleavage of toluene derivatives, sulfoxidation of thioanisole derivatives, and epoxidation of styrene derivatives by mononuclear nonheme iron(IV)–oxo complexes in the presence of triflic acid (HOTf) and Sc(OTf)₃ have been unified as rate‐determining electron transfer coupled with binding of Lewis acids (HOTf and Sc(OTf)₃) by iron(III)–oxo complexes. All logarithms of the observed second‐order rate constants of Lewis acid‐promoted oxidative C?H bond cleavage, sulfoxidation, and epoxidation reactions of iron(IV)–oxo complexes exhibit remarkably unified correlations with the driving forces of proton‐coupled electron transfer (PCET) and metal ion‐coupled electron transfer (MCET) in light of the Marcus theory of electron transfer when the differences in the formation constants of precursor complexes were taken into account. The binding of HOTf and Sc(OTf)₃ to the metal–oxo moiety has been confirmed for Mn^IV–oxo complexes. The enhancement of the electron‐transfer reactivity of metal–oxo complexes by binding of Lewis acids increases with increasing the Lewis acidity of redox‐inactive metal ions. Metal ions can also bind to mononuclear nonheme iron(III)–peroxo complexes, resulting in acceleration of the electron‐transfer reduction but deceleration of the electron‐transfer oxidation. Such a control on the reactivity of metal–oxygen intermediates by binding of Lewis acids provides valuable insight into the role of Ca²⁺ in the oxidation of water to dioxygen by the oxygen‐evolving complex in photosystem II.     

Origin of the unusual kinetics of iron deposition in human H-chain ferritin

From microorganisms to humans, ferritin plays a central role in the biological management of iron. The ferritins function as iron storage and detoxification proteins by oxidatively depositing iron as a hydrous ferric hydroxide mineral core within their shell-like structures. The mechanism by which the mineral core is formed has been the subject of intense investigation for many years. A diiron ferroxidase site located on the H-chain subunit of vertebrate ferritins catalyzes the oxidation of Fe(II) to Fe(III) by molecular oxygen. A previous stopped-flow kinetics study of a transient mu-peroxodiFe(III) intermediate formed at this site revealed very unusual kinetics curves, the shape of which depended markedly on the amount of iron presented to the protein. In the present work, a mathematical model for catalysis is developed that explains the observed kinetics. The model consists of two sequential mechanisms. In the first mechanism, turnover of iron at the ferroxidase site is rapid, resulting in steady-state production of the peroxo intermediate with continual formation of the mineral core until the available Fe(II) in solution is consumed. At this point, the second mechanism comes into play whereby the peroxo intermediate decays and the ferroxidase site is postulated to vacate its complement of iron. The kinetic data reveal for the first time that Fe(II) in excess of that required to saturate the ferroxidase site promotes rapid turnover of Fe(III) at this site and that the ferroxidase site plays a role in catalysis at all levels of iron loading of the protein (48-800 Fe/protein). The data also provide evidence for a second intermediate, a putative hydroperoxodiFe(III) complex, that is a decay product of the peroxo intermediate.     

Structural model studies for the peroxo intermediate P and the reaction pathway from P-->Q of methane monooxygenase using broken-symmetry density functional calculations

Several structural models for the active site of the peroxo intermediate state "P" of the hydroxylase component of soluble methane monooxygenase (MMOH) have been studied, using two DFT functionals OPBE and PW91 with broken-symmetry methodology and the conductor-like screening (COSMO) solvation model. These active site models have different O2 binding modes to the diiron center, such as the mu-eta2,eta2, trans-mu-1,2 and cis-mu-1,2 conformations. The calculated properties, including optimized geometries, electronic energies, Fe net spin populations, and M?ssbauer isomer shift and quadrupole splitting values, have been reported and compared with available experimental results. The high-spin antiferromagnetically (AF) coupled Fe3+ sites are correctly predicted by both OPBE and PW91 methods for all active site models. Our data analysis and comparisons favor a cis-mu-1,2 structure (model cis-mu-1,2a shown in Figure 9) likely to represent the active site of MMOH-P. Feasible structural changes from MMOH-P to another intermediate state MMOH-Q are also proposed, where the carboxylate group of Glu243 side chain has to open up from the mono-oxygen bridging position, and the dissociations of the terminal H2O ligand from Fe1 and of the oxygen atom in the carboxylate group of Glu144 from Fe2 are also necessary for the O2 binding mode changes from cis to trans. The O-O bond is proposed to break in the trans-conformation and forms two mu-oxo bridges in MMOH-Q. The terminal H2O molecule and the Glu144 side chain then rebind with Fe1 and Fe2, respectively, in Q.     

Formation and High Reactivity of the anti‐Dioxo Form of High‐Spin μ‐Oxodioxodiiron(IV) as the Active Species That Cleaves Strong C−H Bonds

Recently, it was shown that μ‐oxo‐μ‐peroxodiiron(III) is converted to high‐spin μ‐oxodioxodiiron(IV) through O?O bond scission. Herein, the formation and high reactivity of the anti‐dioxo form of high‐spin μ‐oxodioxodiiron(IV) as the active oxidant are demonstrated on the basis of resonance Raman and electronic‐absorption spectral changes, detailed kinetic studies, DFT calculations, activation parameters, kinetic isotope effects (KIE), and catalytic oxidation of alkanes. Decay of μ‐oxodioxodiiron(IV) was greatly accelerated on addition of substrate. The reactivity order of substrates is toluene<ethylbenzene≈cumene<trans‐β‐methylstyrene. The rate constants increased proportionally to the substrate concentration at low substrate concentration. At high substrate concentration, however, the rate constants converge to the same value regardless of the kind of substrate. This is explained by a two‐step mechanism in which anti‐μ‐oxodioxodiiron(IV) is formed by syn‐to‐anti transformation of the syn‐dioxo form and reacts with substrates as the oxidant. The anti‐dioxo form is 620 times more reactive in the C?H bond cleavage of ethylbenzene than the most reactive diiron system reported so far. The KIE for the reaction with toluene/[D₈]toluene is 95 at ?30 °C, which the largest in diiron systems reported so far. The present diiron complex efficiently catalyzes the oxidation of various alkanes with H₂O₂.     

Iron(II) complexes with amide-containing macrocycles as non-heme porphyrin analogues

Iron(II) complexes of macrocyclic pentadendate ligands 3,6,9,12,18-pentaazabicyclo[12.3.1]octadeca-1(18),14,16-triene-2,13-dione (H2pydioneN5) and 16-chloro-3,6,9,12,18-pentaazabicyclo[12.3.1]octadeca-1(18),14,16-triene-2,13-dione (H2pyCldioneN5) were synthesized and fully characterized. Complexes with one or two deprotonated amide groups of H2pydione were both isolated. In the former case the metal ion has a distorted octahedral coordination sphere; in the latter case the complex adopts a pentagonal-bipyramidal geometry. NMR experiments show that the protonation state of the ligand is preserved in a dimethyl sulfoxide (DMSO) solution. The complexes maintain a high-spin state even at low temperatures. Detailed kinetic studies of oxygenation of the iron(II) complexes showed that the deprotonation state of the complex has a profound effect on the reactivity with dioxygen. Oxygenation of the dideprotonated complex of iron(II), Fe(pydioneN5), in aprotic solvents proceeds via a path that is analogous to that of iron(II) porphyrins: via iron(III) superoxo and diiron(III) peroxo species, as evidenced by the spectral changes during the reaction, which is second-order in the concentration of the iron(II) complex, and with an inverse dependence of the reaction rate on the concentration of dioxygen. The final products of oxygenation are crystallographically characterized iron(III) mu-oxo dimers. We have also found that the presence of 1-methylimidazole stabilizes the diiron peroxo intermediate. The reaction of Fe(pydioneN5) with dioxygen in methanol is distinctly different under the same conditions. The reaction is first-order in both iron(II) complex and dioxygen, and no intermediate is spectroscopically observed. Similar behavior was observed for the monodeprotonated complex Fe(HpydioneN5)(Cl). The presence of an accessible proton either from the solvent (reactions in methanol) or from the complex itself (in Fe(HpydioneN5)(Cl)) proves sufficient to alter the oxygenation pathway in these macrocyclic systems, which is reminiscent of the properties of iron(II) porphyrin complexes. The new amidopyridine macrocycles can be considered as new members of the "expanded porphyrin analogue" family. The expansion of the cavity provides control over the spin state and availability of protons. These macrocyclic systems also allow for easy synthetic modifications, paving the way to new, versatile metal complexes.