Poly(HEMA-co-NBMI) Monolithic Cryogel Columns for IgG Adsorption

Supermacroporous poly(2-hydroxyethyl methacrylate-co-1,5-naphthalene bismaleimide) [poly(HEMA-co-NBMI)] monolithic cryogel column was prepared by free radical cryo-copolymerization of HEMA with NBMI as a hydrophobic functional comonomer and N,N′-methylene-bisacrylamide as cross-linker directly in a plastic syringe for adsorption of albumin. The monolithic cryogel contained a continuous polymeric matrix which has interconnected pores of 10–100 μm size. Poly(HEMA-co-NBMI) cryogel was characterized by swelling studies, FTIR and scanning electron microscopy. The equilibrium swelling degree of the poly(HEMA-co-NBMI) cryogel was 10.5 g of H₂O/g dry cryogel. Poly(HEMA-co-NBMI) cryogel was used in the adsorption/desorption of IgG from aqueous solutions. The maximum amount of IgG adsorption from aqueous solution in phosphate buffer was 98.20 mg/g polymer at pH 7.0. The nonspecific adsorption of IgG onto plain poly(HEMA) cryogel was very low (2.79 g/g polymer). It was observed that IgG could be repeatedly adsorbed and desorbed with the poly(HEMA-co-NBMI) cryogel without significant loss of adsorption capacity.     

Application of Supermacroporous Monolithic Hydrophobic Cryogel in Capturing of Albumin

Supermacroporous poly{2-hydroxyethyl methacrylate-co-[N,N-bis(2,6-diisopropylphenyl)-perylene-3,4,9,10-tetracarboxylic diimide]} [poly(HEMA-co-DIPPER)] monolithic cryogel column was prepared by radical cryocopolymerization of HEMA with DIPPER as functional comonomer and N,N′-methylene-bisacrylamide (MBAAm) as crosslinker directly in a plastic syringe for adsorption of albumin. The monolithic cryogel contained a continuous polymeric matrix having interconnected pores of 10–50 μm size. Poly(HEMA-co-DIPPER) cryogel was characterized by swelling studies, FTIR, scanning electron microscopy, and elemental analysis. The equilibrium swelling degree of the poly(HEMA-co-DIPPER) cryogel was 14.7 g H₂O/g dry cryogel. Poly(HEMA-co-DIPPER) cryogel was used in the adsorption/desorption of albumin from aqueous solutions. The nonspecific adsorption of albumin onto plain poly(HEMA) cryogel was very low (3.36 g/g polymer). The maximum amount of albumin adsorption from aqueous solution in acetate buffer was 40.9 mg/g polymer at pH 5.0. It was observed that albumin could be repeatedly adsorbed and desorbed with the poly(HEMA-co-DIPPER) cryogel without significant loss of adsorption capacity.     

Hydrophobic cryogels for DNA adsorption: Effect of embedding of monosize microbeads into cryogel network on their adsorptive performances

As alternative hydrophobic adsorbent for DNA adsorption, supermacroporous cryogel disks were synthesized via free radical polymerization. In this study, we have prepared two kinds of cryogel disks: (i) poly(2‐hydroxyethyl methacrylate‐N‐methacryloyl‐l ‐tryptophan) [p(HEMA‐MATrp)] cryogel containing specific hydrophobic ligand MATrp; and (ii) monosize p(HEMA‐MATrp) particles synthesized via suspension polymerization embedded into p(HEMA) cryogel structure to obtain p(HEMA‐MATrp)/p(HEMA) composite cryogel disks. These cryogel disks containing hydrophobic functional group were characterized via swelling studies, Fourier transform infrared spectroscopy, elemental analysis, surface area measurements and scanning electron microscopy. DNA adsorption onto both p(HEMA‐MATrp) cryogel and p(HEMA‐MATrp)/p(HEMA) composite cryogels was investigated. Maximum adsorption of DNA on p(HEMA‐MATrp) cryogel was found to be 15 mg/g polymer. Otherwise, p(HEMA‐MATrp)/p(HEMA) composite cryogels significantly increased the DNA adsorption capacity to 38 mg/g polymer. Composite cryogels could be used repeatedly without significant loss on adsorption capacity after 10 repetitive adsorption–desorption cycles. Copyright © 2013 John Wiley & Sons, Ltd.     

A New Metal-Chelated Cryogel for Reversible Immobilization of Urease

Poly(2-hydroxyethyl methacrylate-co-glycidyl methacrylate) [poly(HEMA-GMA)] cryogel was synthesized by cryopolymerization technique at frozen temperature. Iminodiacetic acid (IDA) was then attached covalently to the cryogel as a chelating agent. Then, poly(HEMA-GMA)-IDA cryogel was chelated with Ni(II) ions and this novel metal affinity support was used for adsorption of urease from its aqueous solution. Urease adsorption experiments were carried out in a continuous system by using a peristaltic pump. Maximum urease adsorption onto poly(HEMA-GMA)-IDA-Ni(II) cryogel was found to be 11.30 mg/g cryogel at pH 5.0 acetate buffer and in 25 °C medium temperature. Urease adsorption capacity decreased with increasing ionic strength and increasing chromatographic flow rate. Adsorption kinetics of urease onto poly(HEMA-GMA)-IDA-Ni(II) cryogel was also investigated and it was found that Langmuir adsorption model is applicable for this adsorption study. This novel immobilized metal affinity chromatography support was used 10 times without any decrease at their adsorption capacity. It was also observed that urease enzyme was repeatedly adsorbed and desorbed without significant lost in enzymatic activity.     

Immobilization of Inulinase on Concanavalin A-Attached Super Macroporous Cryogel for Production of High-Fructose Syrup

In this study, concanavalin A (Con A)-attached poly(ethylene glycol dimethacrylate) [poly(EGDMA)] cryogels were used for immobilization of Aspergillus niger inulinase. For this purposes, the monolithic cryogel column was prepared by radical cryocopolymerization of EGDMA as a monomer and N,N′-methylene bisacrylamide as a crosslinker. Then, Con A was attached by covalent binding onto amino-activated poly(EGDMA) cryogel via glutaraldehyde activation. Characterization of cryogels was performed by FTIR, EDX, and SEM studies. Poly(EGDMA) cryogels were highly porous and pore size was found to be approximately 50–100 μm. Con A-attached poly(EGDMA) cryogels was used in the adsorption of inulinase from aqueous solutions. Adsorption of inulinase on the Con A-attached poly(EGDMA) cryogel was performed in continuous system and the effects of pH, inulinase concentration, and flow rate on adsorption were investigated. The maximum amount of inulinase adsorption was calculated to be 27.85 mg/g cryogel at 1.0 mg/mL inulinase concentration and in acetate buffer at pH 4.0. Immobilized inulinase was effectively used in continuous preparation of high-fructose syrup. Inulin was converted to fructose in a continuous system and released fructose concentration was found to be 0.23 mg/mL at the end of 5 min of hydrolysis. High-fructose content of the syrup was demonstrated by thin layer chromatography.     

A new fast swelling poly[DAPB-co-DMAAm-co-AASS] superabsorbent hydrogel for removal of anionic dyes from water

The objective of this research is to utilize a new poly[N,N-diallyl pyrrolidinium bromide-co-N,Ndimethyl acrylamide-co-acrylic acid sodium salt]superabsorbent hydrogel（SAH）for the removal of two anionic dyes,e.g.,Reactive Red 5B（RR5B）and Reactive Orange M2R（ROM2R）,from water.The SAH was characterized by swelling in water,FTIR,TGA and SEM.The SAH DDA6showed good swelling property and thermal stability.We have also investigated the parameters affecting dye adsorption such as pH,adsorbent dose,adsorption rate and initial dye concentration.The experimental data were also analyzed by applying the well known Langmuir and Freundlich isotherm models.     

Lectin attached affinity cryogels for amyloglucosidase adsorption

Abstract

Preparation of poly[ethylene glycol dimethacrylate (EGDMA)-glycidyl methacrylate (GMA)] cryogel and its usability for amyloglucosidase adsorption were investigated. Cryogels were prepared by cryocopolymerization technique and then functionalized by lectin concanavalin A (Con A). The synthesized cryogel was characterized by FTIR, SEM and EDX analysis and then used for adsorption of amyloglucosidase in a continuous flow system. The maximal amyloglucosidase adsorption efficiency of Con A attached cryogel was found to be as 30.50?mg/g cryogel. Con A modified cryogels were used repeatedly for 30 times without any significant decrease at the amyloglucosidase adsorption capacity. SDS-PAGE and activity studies confirmed that the desorbed amyloglucosidase was active and retained 90% of its initial activity after the adsorption/desorption processes.     

Reversible Immobilization of Urease by Using Bacterial Cellulose Nanofibers

In this work, bacterial cellulose nanofibers were produced by using the Gluconacetobacter hansenii HE1 strain. These nanofibers were derivatized with dye affinity ligand Reactive Green 5, and these newly synthesized dye-attached nanofibers were used for affinity adsorption of urease. Reactive Green 5-attached nanofibers were characterized by Fourier transform infrared spectroscopy, SEM, and energy-dispersive x-ray spectroscopy analysis. Some adsorption conditions which significantly affect the adsorption efficiency were investigated. The maximum urease adsorption capacity was found to be 240 mg/g nanofiber in pH 6.0 and at room temperature. Dye-free plain nanofibers also used for studying nonspecific urease adsorption onto plain nanofibers and nonspecific adsorption were found to be negligible (3.5 mg/g nanofiber). Prepared dye-attached nanofibers can be used in five successive adsorption/desorption steps without any decrease in their urease adsorption capacity. The desorption rate of the adsorbed urease was found to be 98.9 %. The activity of the urease was also investigated, and it was found that free and desorbed urease from the dye-attached nanofibers showed similar specific activity.     

Purification of Alcohol Dehydrogenase from Saccharomyces cerevisiae Using Magnetic Dye-Ligand Affinity Nanostructures

Reactive Green 19 was covalently immobilized onto magnetic nanostructures for purification of alcohol dehydrogenase from Saccharomyces cerevisiae. The Reactive Green 19 immobilized magnetic nanostructures were characterized by Fourier transform infrared spectroscopy, electron spin resonance, atomic force microscope, and energy dispersive X-ray analysis. Particle size of nanostructures was found to be roughly 70 nm. Alcohol dehydrogenase adsorption experiments were investigated under different conditions in batch system (i.e., medium pH, alcohol dehydrogenase concentration, temperature, and ionic strength). Maximum alcohol dehydrogenase adsorption capacity was found to be 176.09 mg/g polymer while nonspecific alcohol dehydrogenase adsorption onto plain magnetic nanostructures was negligible (19.4 mg/g polymer). Alcohol dehydrogenase molecules were desorbed by using 1.0 M NaCl with 98.4 % recovery. Alcohol dehydrogenase from S. cerevisiae was purified 45.63-fold in single step with dye-immobilized magnetic nanostructures, and purity of alcohol dehydrogenase was shown by silver-stained sodium dodecyl sulfate-polyacrylamide gel electrophoresis.     

Magnetic dye affinity beads for the adsorption of beta-casein

Casein is well known as a good protein emulsifier and beta-casein is the major component of casein and commercial sodium caseinate. Dye affinity adsorption is increasingly used for protein separation. beta-Casein adsorption onto Reactive Red 120 attached magnetic poly(2-hydroxyethyl methacrylate) (m-PHEMA) beads was investigated in this work. m-PHEMA beads (80-120 microm in diameter) were produced by dispersion polymerization. The dichlorotriazine dye Reactive Red 120 was attached covalently as a ligand. The dye attached beads, having a swelling ratio of 55% (w/w) and carrying different amounts of Reactive Red 120 (9.2 micromol . g(-1)-39.8 micromol . g(-1)), were used in beta-casein adsorption studies. The effects of the initial concentration, pH, ionic strength and temperature on the adsorption efficiency of dye attached beads were studied in a batch reactor. The non-specific adsorption on the m-PHEMA beads was 1.4 mg . g(-1). Reactive Red 120 attachment significantly increased the beta-casein adsorption up to 37.3 mg . g(-1). More than 95.4% of the adsorbed beta-casein was desorbed in 1 h in a desorption medium containing 1.0 M KSCN at pH 8.0. We concluded that Reactive Red 120 attached m-PHEMA beads can be applied for beta-casein adsorption without significant losses in the adsorption capacities.     

A novel adsorbent for protein chromatography: supermacroporous monolithic cryogel embedded with Cu2+-attached sporopollenin particles

The aim of this study is to prepare supermacroporous cryogels embedded with Cu(2+)-attached sporopollenin particles (Cu(2+)-ASP) having large surface area for high protein adsorption capacity. Supermacroporous poly(2-hydroxyethyl methacrylate) (PHEMA)-based monolithic cryogel column embedded with Cu(2+)-ASP was prepared by radical cryo-copolymerization of 2-hydroxyethyl methacrylate (HEMA) with N,N'-methylene-bis-acrylamide (MBAAm) as cross-linker directly in a plastic syringe for affinity purification of human serum albumin (HSA). Firstly, Cu(2+) ions were attached to sporopollenin particles (SP), then the supermacroporous PHEMA cryogel with embedded Cu(2+)-ASP was produced by free radical polymerization using N,N,N',N'-tetramethylene diamine (TEMED) and ammonium persulfate (APS) as initiator/activator pair in an ice bath. Embedded particles (10 mg) in PHEMA-based cryogel column were used in the adsorption/desorption of HSA from aqueous solutions. Optimum conditions of adsorption experiments were performed at pH 8.0 phosphate buffer, with flow rate of 0.5 mL/min, and at 5°C. The maximum amount of HSA adsorption from aqueous solution was very high (677.4 mg/g SP) with initial concentration 6 mg/mL. It was observed that HSA could be repeatedly adsorbed and desorbed to the embedded Cu(2+)-ASP in PHEMA cryogel without significant loss of adsorption capacity.     

A Crosslinked Carboxylic Acid Containing Cation Exchange Monolithic Cryogel for Human Serum Albumin Separation

For this work, we synthesized poly(N-isopropylacrylamide-acrylamide)-acrylic acid (poly(NIPAM-Am)-AAc) monolithic cryogel for a human serum albumin separation (HSA) from a protein mixture (human serum immunoglobulin, human serum albumin and lysozyme) and performed HSA adsorption studies using the cryogel to do continuous system experiments in a syringe column connected by a peristaltic pump. Poly(NIPAM-Am)-AAc with a pore size of 10–100 μm was produced by free radical polymerization that proceeded in an aqueous solution of monomers frozen inside a syringe column. The monolithic poly(NIPAM-Am)-AAc cryogel was characterized by performing swelling studies, FTIR and SEM that showed a swelling ratio of 6.2 g H₂O/g dry cryogel. The maximum HSA adsorption by the cryogel was 42.5 mg/g polymer at pH 4.0 in a 50 mM acetate buffer. We also studied the effect of two different temperatures (25 and 40°C). The higher temperature increased the adsorption capacity of the cryogel. HSA molecules could be reversibly adsorbed and desorbed five times with the same poly(NIPAM-Am)-AAc cryogel without a noticeable loss of their HSA adsorption capacity. The synthesized cryogel was used to separate albumin from the protein mixture. Adsorbed albumin was eluted by changing the pH of the buffer (pH 7.0 and 25°C). Poly(NIPAM-Am)-AAc monolithic cryogel behaved as a cation exchange column because of its functional carboxylic group.     

Catalase adsorption onto Cibacron Blue F3GA and Fe(III)-derivatized poly(hydroxyethyl methacrylate) membranes and application to a continuous system

Poly(2-hydroxyethyl methacrylate) (poly(HEMA)) membranes were prepared by UV-initiated photopolymerization of HEMA in the presence of an initiator (a-a′-azobisisobutyronitrile, AIBN). An affinity dye, i.e. Cibacron Blue F3GA (CB) was incorporated covalently and then complexed with Fe(III) ions. The polyHEMA-CB and polyHEMA-CB-Fe(III) derivatized membranes were used in the adsorption of catalase (CAT). The enzyme-loading capability of the Fe(III)-containing membrane (23.6 μg/cm²) was greater than that of the poly(HEMA)-CB derivatized membrane (17.1 μg/cm²). The adsorption phenomena appeared to follow a typical Langmuir isotherm. The K_m values for both immobilized catalases (poly(HEMA)-CB-CAT (22.4 mM) and poly(HEMA)-CB-Fe(III)-CAT (19.3 mM)) were higher than that of free enzyme (16.5 mM). Optimum operational temperature was 5°C higher than that of the free enzyme and was significantly broader. A similar observation was made for the optimum pH. Operational, thermal and storage stabilities were found to increase with immobilization, especially in the presence of Fe(III). It was observed that enzyme could be repeatedly adsorbed and desorbed without significant loss in adsorption capacity or enzyme activity.     

Laccase bound to cryogel functionalized with phenylalanine for the decolorization of textile dyes

In this study, amino acid functionalized poly(2-hydroxyethyl methacrylate-N-methacrylolyl-l-phenylalanine) [PHEMAPA] cryogel discs were prepared. In this respect, phenylalanine containing N-methacryloyl-(L)-phenylalanine methyl ester (MAPA) was polymerized with 2-hydroxyethyl methacrylate (HEMA) without requirement of any activation step. Laccase bound poly(2-hydroxyethyl methacrylate-N-methacryloyl-l-phenylalanine) [Lac-PHEMAPA] cryogel discs were applied for decolorization of Reactive Blue-247 (RB-247). The ability of Lac-PHEMAPA cryogel discs on dye decolorization was found to be as 90% in 2 h and even more within 4h. The decolorization activities of 86% and 73% were observed at relatively low (4°C) and high (60°C) temperatures, respectively. The effect of dye concentration on dye decolorization and 100% decolorization activity was achieved in dye concentration between 50–300 ppm. Lac-PHEMAPA cryogel discs maintained 80% of its decolorization activity after six cycles. Consequently, the PHEMAPA cryogel discs are promising materials for immobilizing laccase. The Lac-PHEMAPA has a rapid dye decolorization in a broad range of temperature. The preparation is furthermore very stable and activity is preserved during storage.     

Dye attached poly(hydroxyethyl methacrylate) cryogel for albumin depletion from human serum

Cibacron Blue F3GA was immobilized on poly(hydroxyethyl methacrylate) cryogel and it was used for selective and efficient depletion of albumin from human serum. The poly(hydroxyethyl methacrylate) was selected as the basic component because of its inertness, mechanical strength, chemical and biological stability, and biocompatibility. Cibacron Blue F3GA was covalently attached to the poly(hydroxyethyl methacrylate) cryogel to produce poly(hydroxyethyl methacrylate)-Cibacron Blue F3GA cryogel affinity column. The poly(hydroxyethyl methacrylate)-Cibacron Blue F3GA cryogel was characterized with respect to gelation yield, swelling degree, total volume of macropores, Fourier Transform Infrared spectroscopy, and scanning electron microscopy. It was found that the maximum amount of adsorption (343 mg/g of dry cryogel) obtained from experimental results is very close to the calculated Langmuir adsorption capacity (345 mg/g of dry cryogel). The maximum adsorption capacity for poly(hydroxyethyl methacrylate)-Cibacron Blue F3GA cryogel column was obtained as 950 mg/g of dry cryogel for nondiluted serum. The adsorption capacity decreased with increasing dilution ratios while the depletion ratio of albumin remained as 77% in serum sample. Finally, the poly(hydroxyethyl methacrylate)-Cibacron Blue F3GA cryogel was optimized for using in the fast protein liquid chromatography system for rapid removal of the high abundant proteins from the human serum.     

Dye affinity hollow fibers for albumin purification

Reactive Green HE 4BD was immobilized on polyamide (PA) hollow fibers for human serum albumin (HSA) adsorption from both aqueous solutions and human plasma. Different amounts of Reactive Green HE 4BD were incorporated on the PA hollow fibers by changing the dye attachment conditions, i.e. the initial dye concentration and the addition of sodium carbonate and sodium chloride. The maximum amount of dye attachment was obtained as 39.4 micromol x g(-1) when the hollow fibers were treated with 3 M HCl for 30 min before performing the dye attachment. HSA adsorption onto unmodified and dye-attached hollow fibers was investigated batchwise. The non-specific adsorption of HSA was low (6.0 mg/g hollow fiber). Dye attachment onto the hollow fibers significantly increased the HSA adsorption (86.7 mg/g). The maximum HSA adsorption was observed at pH 5.0. Higher HSA adsorption was observed from human plasma (198 mg HSA/g). The desorptions were performed by adding 0.1 M Tris/HCl buffer containing 0.5 M NaSCN or 1.0 M NaCl to the HSA solutions in which adsorption equilibria had been reached. The desorption results demonstrated that the adsorption of HSA to the adsorbent was reversible. Chemical structure of Reactive Green HE-4BD.     

Photocatalytic degradation of triazine dyes over N-doped TiO2 in solar radiation

Photocatalytic degradation of the reactive triazine dyes Reactive Yellow 84 (RY 84), Reactive Red 120 (RR 120), and Reactive Blue 160 (RB 160) on anatase phase N-doped TiO₂ in the presence of natural sunlight has been carried out in this work. The effect of experimental parameters like initial pH and concentration of dye solution and dosage of the catalyst on photocatalytic degradation have also been investigated. Adsorption of dyes on N-doped TiO₂ was studied prior to photocatalytic studies. The studies show that the adsorption of dyes on N-doped TiO₂ was high at pH 3 and follows the Langmuir adsorption isotherm. The Langmuir monolayer adsorption capacity of dyes on N-doped TiO₂ was 39.5, 86.0, and 96.3 mg g^?1 for RY 84, RR 120, and RB 160, respectively. The photocatalytic degradation of the dyes follows pseudo first-order kinetics and the rate constant values are higher for N-doped TiO₂ when compared with that of undoped TiO₂. Moreover, the degradation of RY 84 on N-doped TiO₂ in sunlight was faster than the commercial Aeroxide^® P25. However, the P25 has shown higher photocatalytic activity for the other two dyes, RR 120 and RB 160. The COD of 50 mg l^?1 Reactive Yellow-84, RR 120 and RB 160 was reduced by 65.1, 73.1, and 69.6 %, respectively, upon irradiation of sunlight for 3 h in the presence of N-doped TiO₂. The photocatalyst shows low activity for the degradation of RY 84 dye, when its concentration was above 50 mg l^?1, due to the strong absorption of photons in the wavelength range 200–400 nm by the dye solution. LC–MS analysis shows the presence of some triazine compounds and formimidamide derivatives in the dye solutions after 3 h solar light irradiation in the presence of N-doped TiO₂.     

Lipase from Carica papaya latex presents high enantioselectivity toward the resolution of prodrug (R,S)-2-bromophenylacetic acid octyl ester

Besides the well-known papain, lipolytic activity is another interesting enzymatic activity present in latex from Carica papaya. This lipolytic activity is strongly attached to the latex solid phase, resulting in a naturally immobilized biocatalyst. In this work we describe the kinetic resolution of (R,S)-2-bromophenylacetic acid octyl ester by Carica papaya crude latex and two partially purified latex fractions. Several parameters, such as substrate concentration and solvent effects were studied. The best results were obtained using decane as solvent with 50 mM of substrate and 50 mg/mL enzyme/reaction medium; under these conditions, a high enantioselectivity (E >200) was obtained with crude latex. A twofold increase of the initial rate maintaining E >200 was obtained using purified fractions without protease and without esterase. Lipase from Carica papaya latex is the most enantioselective wild-type enzyme ever described for the studied reaction.     

Poly-L-Histidine Attached Poly(glycidyl methacrylate) Cryogels for Heavy Metal Removal

Poly-L-histidine immobilized poly(glycidyl methacrylate) (PGMA) cryogel discs were used for the removal of heavy metal ions [Pb(II), Cd(II), Zn(II) and Cu(II)] from aqueous solutions. In the first step, PGMA cryogel discs were synthesized using glycidyl methacrylate (GMA) as a basic monomer and methylene bisacrylamide (MBAAm) as a cross linker in order to introduce active epoxy groups through the polymeric backbone. Then, the metal chelating groups are incorporated to cryogel discs by immobilizing poly-L-histidine (mol wt ≥ 5000) having poly-imidazole ring. The swelling test, fourier transform infrared spectroscopy and scanning electron microscopy were performed to characterize both the PGMA and poly-L-histidine immobilized PGMA [P-His@PGMA] cryogel discs. The effects of the metal ion concentration and pH on the adsorption capacity were studied. These parameters were varied between 3.0–6.0 and 10–800 mg/L for pH and metal ion concentration, respectively. The maximum adsorption capacity of heavy metal ions of P-His@PGMA cryogel discs were 6.9 mg/g for Pb(II), 6.4 mg/g for Cd(II), 5.6 mg/g for Cu(II) and 4.3 mg/g for > Zn(II). Desorption of heavy metal ions was studied with 0.1 M HNO₃ solution. It was observed that cryogel discs could be recurrently used without important loss in the adsorption amount after five repetitive adsorption/desorption processes. Adsorption isotherms were fitted to Langmuir model and adsorption kinetics were suited to pseudo-second order model. Thermodynamic parameters (i.e. ΔH° ΔS°, ΔG°) were also calculated at different temperatures.     

Poly(norbornene)s as matrix materials for platinum tetrakis(pentafluorophenyl)porphyrin based optical oxygen sensors

A set of poly(norbornenes) was prepared using ring opening metathesis polymerization (ROMP) and used as matrix material for the preparation of optical oxygen sensor layers based on platinum tetrakis(pentafluorophenyl)porphyrin (PtTFPP) as the sensitive dye. Different polymers were prepared and investigated in order to retrieve information on the influence of the anchor group and the side chain attached to the polymer backbone on their performance as matrix material for the dye. Bulky side groups increased the oxygen permeability through ROM polymer layers, especially when the bulky group was directly attached via an anchor group to the polymer backbone without any aliphatic spacer in between. Sensor layers made of poly(endo,exo[2.2.1]bicyclo-5-heptene-2,3-dicarboxyclic acid di-tert-butylester) and PtTFPP exhibited the highest τ₀/τ ratio and responded strongly to small amounts of oxygen.