Mushroom Polysaccharides and Lipids Synthesized in Liquid Agitated and Static Cultures. Part II: Study of Volvariella volvacea

Volvariella volvacea strains were studied in relation with their ability to produce biomass, lipids and polysaccharides. Firstly, screening of four strains (AMLR 188, 190, 191 and 192) was performed in agar cultures, where the mycelial growth rate of the strains was measured, and in static liquid cultures, where the production of biomass, the biosynthesis of total cellular lipids and the consumption of glucose were monitored. For all strains, biomass production was significant (13?C15?g?l^?1) and total lipid in dry weight (%, w/w) ranged from 3 to 12?%. Afterwards, a detailed kinetic analysis of mycelial biomass, extra- and intra- cellular polysaccharides (EPS, IPS, respectively) as well as lipid production by a V. volvacea selected strain was conducted in submerged static and agitated cultures. Maximum values of 15?g?l^?1 biomass, ??1.0?g?l^?1 EPS and 5.5?g?l^?1 IPS were recorded. Agitation did not have severe impact on biomass, EPS and IPS production, but it increased total lipid in dry weight quantities. EPS, IPS and lipid in dry weight values decreased with time. Glucose was the major cellular carbohydrate detected. Total fatty acid analysis of cellular lipids was performed for all V. volvacea strains and linoleic acid ^??9,12C18:2 was predominant. Neutral lipids constituted the major fraction of cellular lipids, but their quantity decreased as fermentation proceeded. Phospholipids were the most saturated lipid fraction.     

Synthesis and Functional Characterization of Antibiofilm Exopolysaccharide Produced by Enterococcus faecium MC13 Isolated from the Gut of Fish

The synthesis and functional characterization of an antibiofilm exopolysaccharide (EPS) from a probiotic Enterococcus faecium MC13 were investigated. The temperature of 35 °C, pH of 6.5, and salinity of 1–2 % were found to be optimum for EPS production. The sucrose (30 g?l^?1) and yeast extract (20 g?l^?1) acted as suitable carbon and nitrogen sources, respectively, which strongly influenced EPS production with yield of 11.33 and 11.91 g?l^?1. Based on the thin layer chromatography, EPS of E. faecium MC13 was found to be a heteropolysaccharide, composed of galactose and glucose sugar units with a molecular mass of 2.0?×?10⁵?Da. Fourier transform infrared spectrum analysis of the EPS revealed many predominant functional groups including hydroxyl, carboxyl, and amide groups. EPS exhibited better emulsifying and flocculating activities which is relatively similar to those of commercial polysaccharides. In vitro antioxidant inspect of EPS showed lesser antioxidant activity than that of the control ascorbic acid. Thermal behavior of EPS was different from the other EPS produced by other lactic acid bacteria. In vitro antibiofilm assay of EPS exhibited significant biofilm inhibition, especially with Listeria monocytogenes. To the best of our knowledge, this is the first report on EPS of E. faecium with strong emulsifying and flocculating activities.     

Evaluation of Metal Ions and Surfactants Effect on Cell Growth and Exopolysaccharide Production in Two-Stage Submerged Culture of Cordyceps militaris

During the two-stage submerged fermentation of medicinal mushroom Cordyceps militaris, it was found that K⁺, Ca²⁺, Mg²⁺, and Mn²⁺ were favorable to the mycelial growth. The EPS production reached the highest levels in the media containing Mg²⁺ and Mn²⁺. However, Ca²⁺ and K⁺ almost failed to increase significantly exopolysaccharides (EPS) production. Sodium dodecyl sulfate (SDS) significantly enhanced EPS production compared with that of without adding SDS when SDS was added on static culture stage of two-stage cultivation process. The presence of Tween 80 in the medium not only simulated mycelial growth but also increased EPS production. By response surface methods (RSM), EPS production reached its peak value of 3.28?g/L under optimal combination of 27.6?mM Mg²⁺, 11.1?mM Mn²⁺, and 0.05?mM SDS, which was 3.76-fold compared with that of without metal ion and surfactant. The results obtained were useful in better understanding the regulation for efficient production of EPS of C. militaris in the two-stage submerged culture.     

Efficient Microbial Conversion of l-Tyrosine to l-DOPA by Brevundimonas sp. SGJ

l-DOPA (3,4-dihydroxyphenyl-l-alanine), the most widely used drug for the treatment of Parkinson??s disease, was produced in buffer using biomass of Brevundimonas sp. SGJ. The effects of enhancers, such as carrageenan, diatomaceous earth, and activated charcoal, on the l-DOPA production were evaluated to obtain the maximum yield. The optimal process conditions found were pH?8, 2?g?l^?1 cell mass, 2?g?l^?1 l-tyrosine, 0.04?g?l^?1 CuSO₄, 0.02?g?l^?1 l-ascorbic acid, 0.5?g?l^?1 carrageenan, and 40?°C temperature. In addition, repeated use of cells resulted in the highest yield of 3.81?g?l^?1 (95.2%) of l-DOPA with utilization of 4?g?l^?1 l-tyrosine, and the highest tyrosinase activity (9,201?U?mg^?1) was observed at 18?h of incubation. Furthermore, the produced l-DOPA was confirmed by high-performance thin-layer chromatography, high-performance liquid chromatography, and gas chromatography?Cmass spectroscopy. Kinetic studies showed significant values of Y _p/s, Q _s, and q _s after optimization of the process. Thus, Brevundimonas sp. SGJ could be an eventual new source for large-scale production of l-DOPA.     

Optimised isolation of polysaccharides from Lentinula edodes strain NCBI JX915793 using response surface methodology and their antibacterial activities

Mycelial growth in a defined medium by submerged fermentation is a rapid and alternative method for obtaining fungal biomass of consistent quality. Biomass, exopolysaccharides (EPS) and intracellular polysaccharides (IPS) production were optimised by response surface methodology in Lentinula edodes strain LeS (NCBI JX915793). The optimised conditions were pH 5.0, temperature 26°C, incubation period of 25 days and agitation rate of 52 r/min for L. edodes strain LeS. Under the calculated optimal culture conditions, biomass production (5.88 mg mL^? 1), EPS production (0.40 mg mL^? 1) and IPS production (12.45 mg g^? 1) were in agreement with the predicted values for biomass (5.93 mg mL^? 1), EPS (0.55 mg mL^? 1) and IPS production (12.64 mg g^? 1). Crude lentinan exhibited highest antibacterial effects followed by alcoholic, crude and aqueous extracts. The results obtained may be useful for highly effective yield of biomass and bioactive metabolites.     

Optimal glucose and inoculum concentrations for production of bioactive molecules by Paenibacillus polymyxa RNC-D

The production of antimicrobial metabolites by Paenibacillus polymyxa RNC-D was assessed. Two process variables, glucose and inoculum concentrations, were evaluated at different levels (5?C40 g L^?1, and at ?? _r = 2.5?C5.0 %, respectively), and their effects on biomass formation, minimal inhibitory concentration (MIC) against Escherichia coli, and surface tension reduction (STR) were studied. When the fermentation process was carried out under non-optimised conditions, the biomass, MIC, and STR achieved the following values: 0.6 g L^?1, 1 g L^?1, and 18.4 mN m^?1, respectively. The optimum glucose (16 g L^?1) and inoculum volume ratio (?? _r = 5.0 %) were defined in order to maximise the biomass formation, with a low value of MIC and high STR of extract. The experiments carried out under optimal conditions showed the following values for the dependent variables: biomass concentration 2.05 g L^?1, MIC 31.2 ??g mL^?1, and STR 10.7 mN m^?1, which represented improvement of 241.7 %, 96.9 %, and 41.9 % for the responses of biomass, MIC, and STR, respectively. This is the first recorded study on the optimisation of culture conditions for the production of antimicrobial metabolites of P. polymyxa RNC-D, and constitutes an important step in the development of strategies to modulate the production of antimicrobial molecules by this microorganism at elevated levels.     

Biotechnological Utilization of Biodiesel-Derived Glycerol for the Production of Ribonucleotides and Microbial Biomass

Ten yeast strains were evaluated concerning their capabilities to assimilate biodiesel-derived glycerol in batch cultivation. The influence of glycerol concentration, temperature, pH and yeast extract concentration on biomass production was studied for the yeast selected. Further, the effect of agitation on glycerol utilization by the yeast Hansenula anomala was also studied. The yeast H. anomala CCT 2648 showed the highest biomass yield (0.30?g?g^?1) and productivity (0.19?g?L^?1?h^?1). Citric acid, succinic acid, acetic acid and ethanol were found as the main metabolites produced. The increase of yeast extract concentration from 1 to 3?g?L^?1 resulted in high biomass production. The highest biomass concentration (21?g?L^?1), yield (0.45?g?g^?1) and productivity (0.31?g?L^?1?h^?1), as well as ribonucleotide production (13.13?mg?g^?1), were observed at 700?rpm and 0.5?vvm. These results demonstrated that glycerol from biodiesel production process showed to be a feasible substrate for producing biomass and ribonucleotides by yeast species.     

Optimization of Elicitation Conditions with Methyl Jasmonate and Salicylic Acid to Improve the Productivity of Withanolides in the Adventitious Root Culture of Withania somnifera (L.) Dunal

Adventitious root cultures derived from leaf derived callus of Withania somnifera (L.) Dunal were treated with methyl jasmonate and salicylic acid independently. Biomass accumulation, culture age, elicitation period, and culture duration were optimized for higher withanolides production in the two best-responding varieties collected from Kolli hills (Eastern Ghats) and Cumbum (Western Ghats) of Tamil Nadu, India. Between the two elicitors, salicylic acid (SA) improved the production of major withanolides (withanolide A, withanolide B, withaferin A, and withanone) as well as minor constituents (12-deoxy withastramonolide, withanoside V, and withanoside IV) in the Kolli hills variety. Treatment of root biomass (11.70?g FW) on 30-day-old adventitious root cultures with 150???M SA for 4?h elicitor exposure period resulted in the production of 64.65?mg?g^?l dry weight (DW) withanolide A (48-fold), 33.74?mg?g^?l DW withanolide B (29-fold), 17.47?mg?g^?l DW withaferin A (20-fold), 42.88?mg?g^?l DW withanone (37-fold), 5.34?mg?g^?l DW 12-deoxy withastramonolide (nine fold), 7.23?mg?g^?l DW withanoside V (seven fold), and 9.45?mg?g^?l DW withanoside IV (nine fold) after 10?days of elicitation (40th day of culture) when compared to untreated cultures. This is the first report on the use of elicitation strategy on the significant improvement in withanolides production in the adventitious root cultures of W. somnifera.     

Identification of the Primary Structure of Selenium-Containing Polysaccharides Selectively Inhibiting T-Cell Proliferation

We previously described the biosynthesis, isolation, and immunosuppressive activity of the selenium-containing polysaccharide fraction isolated from the mycelial culture of Lentinula edodes. Structural studies have shown that the fraction was a protein-containing mixture of high molar mass polysaccharides α- and β-glucans. However, which of the components of the complex fraction is responsible for the immunosuppressive activity non-typical for polysaccharides of fungal origin has not been explained. In the current study, we defined four-polysaccharide components of the Se-containing polysaccharide fraction determined their primary structure and examined the effect on T- and B-cell proliferation. The isolated Se-polysaccharides, α-1,4-glucan (M_w 2.25 × 10⁶ g/mol), unbranched β-1,6-d-glucan, unbranched β-1,3-d-glucan and β-1,3-branched β-1,6-d-glucan (M_w 1.10 × 10⁵ g/mol), are not typical as components of the cell wall of L. edodes. All are biologically active, but the inhibitory effect of the isolated polysaccharides on lymphocyte proliferation was weaker, though more selective than that of the crude fraction.     

Ethanol Production from Starch Hydrolyzates using <Emphasis Type="Italic">Zymomonas mobilis</Emphasis> and Glucoamylase Entrapped in Polyvinylalcohol Hydrogel

The glucoamylase from Aspergillus niger, immobilized into poly(vinylalcohol) hydrogel lens-shaped capsules LentiKats®, was used for simultaneous saccharification and fermentation (SSF) with Zymomonas mobilis in free form. This system was stable in both the repeated batch and continuous mode of SSF. The microorganism was found to adsorb on the capsules with immobilized enzyme. This increased the ethanol productivity of the repeated batch system with 5% w/v of immobilized glucoamylase almost 2.1 times (7.2 g l^?1 h^?1) compared to free enzyme–free microorganism system (3.5 g l^?1 h^?1). The continuous SSF with the immobilized glucoamylase (11.5% w/v) tested for 15 days had productivity 10 g l^?1 h^?1, which is comparable to continuous experiments on semi-defined glucose medium (10 g l^?1 h^?1). These two systems were stable in both glucoamylase activity and microorganism productivity.     

Bioflocculant Exopolysaccharide Production by Azotobacter indicus Using Flower Extract of Madhuca latifolia L

Efficacy of Azotobacter indicus ATCC 9540 strain for production exopolysaccharide (EPS) bioflocculant was investigated. Mahua flower extract (Madhuca latifolia L), a natural substrate at the concentration of 20 g L^?1, gave maximum recovery of EPS followed by sucrose and mannitol as compared to other carbon sources after 172 h. Yeast extract was found to be the most effective nitrogen source as compared to beef extract, sodium nitrate, ammonium sulfate, casein hydrolysate, and urea for the production of EPS. EPS production was increased in presence of nitrogen (5.51 g L^?1) as compared to nitrogen-free medium (3.51 g L^?1), and fermentation time was also reduced by 28 h. Maximum EPS production (6.10 g L^?1) was found in the presence of 20 g L^?1 flower extract and 0.5 g L^?1 yeast extract containing Ashby’s media with 180 rpm at 30 °C at 144 h, under controlled conditions in 2.5 L fermenter using optimized medium. The isolated EPS showed cation-dependent flocculating activity. Concentration of EPS played an important role in bioflocculating activity which increased in a concentration-dependent manner up to a certain limit, with the maximum flocculation of 72% at 500 mg L^?1 concentration but remained almost static after this concentration. Extracted polymer was characterized by different chemical tests, FT-IR spectroscopy, and TLC which showed presence of uronic acids, O-acetyl groups, and Orcinol with suggestive indication of alginate like polymer. This study suggests that use of M. latifolia L. flowers can be a potential alternative bioresource for production of exopolysaccharide.     

Pulse radiolysis studies of intermolecular charge transfers involving tryptophan and three-electron-bonded intermediates derived from methionine

The oxidation processes of the radiation-generated, three-electron-bonded intermediates AcMet₂ [S??S]⁺ and AcMet [S??Br] were investigated by pulse radiolysis via their reactions with tryptophan (TrpH). These intermediates were derived from N-acetyl-methionine amide (N-AcMetNH₂) and N-acetyl-methionine methyl ester (N-AcMetOMe). The bimolecular rate constant k of the reaction between each intermediate and l-tryptophan (TrpH) was measured. For N-AcMetNH₂, k for the reaction of AcMet₂ [S??S]⁺ with TrpH were 3.4?×?10⁸ and 2.2?×?10⁸?dm³?mol^?1?s^?1 at pH?=?1 and 4.5, respectively. For N-AcMetOMe, k for the reaction of AcMet₂ [S??S]⁺ with TrpH were 4.0?×?10⁸ and 2.8?×?10⁸?dm³?mol^?1?s^?1 at pH 1 and 4.5, respectively. The rate constants for the intermolecular transformation of Met [S??Br] into TrpH⁺ or Trp were also estimated. For N-AcMetNH₂, k for the reaction of AcMet₂ [S??Br] with TrpH were 2.6?×?10⁸ and 3.3?×?10⁸?dm³?mol^?1?s^?1 at pH 1 and 4.5, respectively. Related mechanisms were discussed.     

Optimization of Adventitious Root Culture for Production of Biomass and Secondary Metabolites in Prunella vulgaris L.

Adventitious root cultures of Prunella vulgaris L. were established in shaking flask system for the production of biomass and secondary metabolites. Adventitious root cultures were induced from callus cultures obtained from leaf explants on solid Murashige and Skoog (MS) medium containing combination of 6-benzyladenine (BA; 1.0 mg l^?1) and naphthalene acetic acid (NAA; 1.5 mg l^?1). Thereafter, 0.49 g inoculum was transferred to liquid MS medium supplemented with different concentrations of NAA (0.5–2.0 mg l^?1). Growth kinetics of adventitious roots was recorded with an interval of 7 days for 49 days period. Highest biomass accumulation (2.13 g/l) was observed in liquid medium containing 1.0 mg l^?1 NAA after 21 days of inoculation. However, other concentrations of NAA also showed similar accumulation pattern but the biomass gradually decreases after 49 days of inoculation. Adventitious roots were collected and dried for investigation of total phenolics (TP), total flavonoids (TF), and antioxidant activities. Higher TPC (0.995 GAE mg/g-DRB) and TFC (6.615 RE mg/g-DRB) were observed in 0.5 mg l^?1 NAA treated cultures. In contrast, higher antioxidant activity (83.53 %) was observed 1.5 mg l^?1 NAA treated cultures. These results are helpful in up scaling of root cultures into bioreactor for secondary metabolites production.     

Use of Styrene as Sole Carbon Source by the Fungus Exophiala oligosperma: Optimization and Modeling of Biodegradation, Pathway Elucidation, and Cell Membrane Composition

Biodegradation of styrene by Exophiala sp. was tested at different initial concentrations (19.3?C170.6?mg?l^?1), pH (2.8?C8.7), and temperatures (19.8?C45.1?°C), for 120?h according to a 2³ full-factorial central composite design. The specific growth rate (SGR, per hour) and specific styrene utilization rate (SUR, milligrams of styrene per milligram of biomass per hour) values were used as the response variables for optimization purposes. The interactions between concentration and temperature (P?=?0.022), and pH and temperature (P?=?0.010) for SGR, and interactions between concentration and temperature (P?=?0.012) for SUR were found to be statistically significant. The optimal values for achieving high SGR (0.15?h^?1) and SUR (0.3622?mg styrene mg^?1 biomass h^?1) were calculated from the regression model equation. Those values are C _o ?=?89.1?mg?l^?1, pH?=?5.4, and T?=?31.5?°C for SGR and C _o ?=?69.2?mg?l^?1, pH?=?5.5, and T?=?32.4?°C for SUR. It was also observed that the Exophiala strain degrades styrene via phenylacetic acid, involving initial oxidation of the vinyl side chain. Besides, in the presence of styrene, changes in the fatty acids profile were also observed. It is hypothesized that an increasing amount of linoleic acid (18:2) may be involved in the protection of the fungus against toxic substrate.     

Kinetics and Thermodynamics of Ethanol Production by Saccharomyces cerevisiae MLD10 Using Molasses

In this study, we have used ultraviolet (UV) and γ-ray induction to get a catabolite repression resistant and thermotolerant mutant with enhanced ethanol production along with optimization of sugar concentration and temperature of fermentation. Classical mutagenesis in two consecutive cycles of UV- and γ-ray-induced mutations evolved one best catabolite-resistant and thermotolerant mutant Saccharomyces cerevisiae MLD10 which showed improved ethanol yield (0.48?±?0.02 g g^?1), theoretical yield (93?±?3 %), and extracellular invertase productivity (1,430?±?50 IU l^?1 h^?1), respectively, when fermenting 180 g sugars l^?1 in molasses medium at 43 °C in 300 m³ working volume fermenter. Ethanol production was highly dependent on invertase production. Enthalpy (ΔH*) (32.27 kJ M^?1) and entropy (ΔS*) (?202.88 J M^?1 K^?1) values at 43 °C by the mutant MLD10 were significantly lower than those of β-glucosidase production by a thermophilic mutant derivative of Thermomyces lanuginosus. These results confirmed the enhanced production of ethanol and invertase by this mutant derivative. These studies proved that mutant was significantly improved for ethanol production and was thermostable in nature. Lower fermentation time for ethanol production and maintenance of ethanol production rates (3.1 g l^?1 h^?1) at higher temperature (43 °C) by this mutant could decrease the overall cost of fermentation process and increase the quality of ethanol production.     

Metal-metabolomics of microalga Chlorella sorokiniana growing in selenium- and iodine-enriched media

The microalga Chlorella sorokiniana has been used to accumulate selenium and iodine from culture media enriched with these elements as a first stage in the production of supplemented foods. The microalgal colony was grown in a conventional culture medium containing iodine (KI) at concentrations in the range of 150?C4000 ??g mL^?1. Similar experiments were performed with selenium (SeO ₄ ^2? ) at concentrations in the range of 20?C500 ??g mL^?1. The concentration of iodine and selenium in the culture medium was analytically monitored daily and the viability of the colony was checked by biomass concentration measurement and by evaluation of the total content of chlorophyll and carotenoids. In addition, photosynthetic activity and the number of cells were also monitored. Iodine accumulation in the algal biomass increased rapidly with time and reached a steady state after 4 h of exposure. With Se exposure the colony viability decreased, although the culture grew well with concentrations of the element of 50 ??g mL^?1 in the culture medium; this experiment produced Se-enrichment in the alga (3 ??g g^?1) within 100 h. Sequential extraction of an algal pellet was performed in order to separate Se compounds according to their affinity with the following solvents: hot water to recover low molecular mass Se species, enzymatic extraction with driselase for species associated with the cell wall, sodium dodecyl sulphate (SDS) for water insoluble selenoproteins and, finally, enzymolysis with lipase and pronase that release and fragment residual selenoproteinsproducing compounds with low molecular mass. Size-exclusion chromatography (SEC) coupled with an ICP-MS detector showed the preponderance of Se-containing molecules with low molecular mass, possibly seleno-amino acids. Only a peak of low intensity located at 10 min was observed in the SDS extract that could be associated with a protein with molecular mass of 67 kDa. Finally, analysis of the aqueous extract of alga by reverse-phase chromatography with inductively-coupled plasma mass-spectrometry (RPC-ICP-MS) detection revealed the presence of selenocysteine (SeCys₂), selenomethylselenocysteine (SeMetSeCys), selenomethionine (SeMet), and Se(VI), particularly the last two species.     

An Indigenous Hyperproductive Species of Aureobasidium pullulans RYLF-10: Influence of Fermentation Conditions on Exopolysaccharide (EPS) Production

In recent years, a significant interest has been generated in discovering and developing exopolysaccharides (EPS) produced by microorganisms, especially fungi due to their multifaceted industrial and pharmacological applications. A number of filamentous and cellular fungi have been explored for this; however, according to the existing literature, the work on exopolysaccharide production by indigenous culture on this aspect is still very less and requires a serious attention. The present work is an attempt in this regard and aims to optimize the submerged culture conditions to produce the exopolysaccharides from an indigenous yeast Aureobasidium pullulans RYLF-10 with respect to several operating parameters in shake flask fermentation. The yeast A. pullulans RYLF-10 was identified by 18s RNA sequencing and detailed study on its nutritional requirements, and environmental conditions for submerged culture have been optimized. The optimal temperature and pH for both the vegetative growth and EPS production were found to be 28?±?1 °C and 5.0, respectively, while the agitation speed and inoculum size were reported to be 150 rpm and 1 % (v/v), respectively. Sucrose (50 g/l) and yeast extract (1 g/l) were found to be the most suitable carbon and nitrogen sources which worked best in the ratio of 60:1 and resulted in the maximum EPS yield. Similarly, the other variables like growth regulator (riboflavin) and minerals (NaCl?+?K₂HPO₄?+?MgSO₄) altogether resulted in a noteworthy EPS yield of 45.24 g/l which is the maximum yield from this indigenous isolate of A. pullulans RYLF-10.     

Effects of elicitors on the enhancement of asiaticoside biosynthesis in cell cultures of centella (Centella asiatica L. Urban)

In this work, the effects of elicitor concentration and elicitation day on the growth and asiaticoside production of centella cells were investigated. The results showed that 2-hydroxybenzoic acid from 50?C200 ??M and yeast extract from 2?C5 g L^?1 had different eliciting influences. The addition of 2-hydroxybenzoic acid and yeast extract to the cultures strongly enhanced asiaticoside production in centella cells. The increase in asiaticoside content induced by the addition of 100 ??M of 2-hydroxybenzoic acid and 4 g L^?1 of yeast extract at day 10 of inoculation was about 5- and 3.5-fold, respectively, as compared with that of the reference cells. In general, 2-hydroxybenzoic acid (abiotic elicitor) was more effective in enhancing asiaticoside biosynthesis than yeast extract (biotic elicitor).     

In Situ Biphasic Extractive Fermentation for Hexanoic Acid Production from Sucrose by Megasphaera elsdenii NCIMB 702410

Hexanoic acid production by a bacterium using sucrose as an economic carbon source was studied under conditions in which hexanoic acid was continuously extracted by liquid–liquid extraction. Megasphaera elsdenii NCIMB 702410, selected from five M. elsdenii strains, produced 4.69 g l^?1 hexanoic acid in a basal medium containing sucrose. Production increased to 8.19 g l^?1 when the medium was supplemented by 5 g l^?1 sodium butyrate. A biphasic liquid–liquid extraction system with 10 % (v/v) alamine 336 in oleyl alcohol as a solvent was evaluated in a continuous stirred-tank reactor held at pH 6. Over 90 % (w/w) of the hexanoic acid in a 0.5 M aqueous solution was transferred to the extraction solvent within 10 h. Cell growth was not significantly inhibited by direct contact of the fermentation broth with the extraction solvent. The system produced 28.42 g l^?1 of hexanoic acid from 54.85 g l^?1 of sucrose during 144 h of culture, and 26.52 and 1.90 g l^?1 of hexanoic acid was accumulated in the extraction solvent and the aqueous fermentation broth, respectively. The productivity and yield of hexanoic acid were 0.20 g l^?1 h^?1 and 0.50 g g^?1 sucrose, respectively.     

l-Ribose Production from l-Arabinose by Immobilized Recombinant Escherichia coli Co-expressing the l-Arabinose Isomerase and Mannose-6-Phosphate Isomerase Genes from Geobacillus thermodenitrificans

l-Ribose is an important precursor for antiviral agents, and thus its high-level production is urgently demanded. For this aim, immobilized recombinant Escherichia coli cells expressing the l-arabinose isomerase and variant mannose-6-phosphate isomerase genes from Geobacillus thermodenitrificans were developed. The immobilized cells produced 99 g/l l-ribose from 300 g/l l-arabinose in 3 h at pH 7.5 and 60 °C in the presence of 1 mM Co²⁺, with a conversion yield of 33 % (w/w) and a productivity of 33 g/l/h. The immobilized cells in the packed-bed bioreactor at a dilution rate of 0.2 h^?1 produced an average of 100 g/l l-ribose with a conversion yield of 33 % and a productivity of 5.0 g/l/h for the first 12 days, and the operational half-life in the bioreactor was 28 days. Our study is first verification for l-ribose production by long-term operation and feasible for cost-effective commercialization. The immobilized cells in the present study also showed the highest conversion yield among processes from l-arabinose as the substrate.