无机偶合流动注射化学发光测定钛的研究

基于钛(Ⅲ)对铬(Ⅵ)氧化I-产生I2的诱导作用,和I2氧化鲁米诺产生化学发光的反应,建立了无机偶合反应流动注射化学发光测定痕量钛的新方法。方法线性范围为1×10-9～1×10-5g/mL,RSD=3.0%(n=11,ρ=1×10-7g/mL),检出限为4.0×10-10g/mL。方法用于人发样品中钛的测定。     

流动注射后化学发光法测定异烟肼

本文发现了异烟肼在铁氰化钾-钙黄绿素化学发光反应体系中的后化学发光反应。优化了反应条件,建立了一种利用后化学发光反应测定异烟肼的流动注射化学发光分析法。方法的检出限为6×10-8g/mL, 相对标准偏差为1.8% (2.0×10-6 g/mL 异烟肼,n=11）,线性范围为2.0×10-7~1.0×10-5 g/mL。此法已用于异烟肼片剂中异烟肼含量的测定,结果与药典方法测定值一致。     

铁氰化钾-鲁米诺体系后化学发光行为的研究-流动注射后化学发光法测定可待因

发现了可待因在铁氰化钾鲁米诺化学发光反应体系中的后化学发光反应。优化了反应条件,建立了一种利用后化学发光反应测定可待因的流动注射化学发光新方法。方法的检出限为3×10-8g mL,相对标准偏差为1.9%(1.0×10-6g mL可待因,n=11),线性范围为8.0×10-8～1.0×10-5g mL。此法已用于可待因片剂中可待因的测定,结果与药典方法测定值一致。     

无机偶合反应流动注射化学发光分析法测定痕量汞──K_4Fe(CN)_6-Luminol体系

本文将Hg（Ⅱ）催化K4Fe（CN）6分解的反应与鲁米诺同Cu（CN）的化学发光反应相偶合，采用流动注射分析技术，实现了痕量汞的测定。方法的检出限为DL＝2．2×10-7g／L，测定汞的线性范围为8×10－7～4×10－5g／L，对8μg／L汞进行测定，相对标准偏差为3．4％。用于环境水中痕量汞的测定结果很好。     

反向流动注射化学发光法测定痕量硫离子

在碱性条件下,基于硫离子对鲁米诺和高碘酸钾化学发光反应有很强的增敏作用,建立了反向流动注射化学发光法检测水中痕量硫离子的新方法。在优化实验条件下,硫离子浓度在8.0×10-10~5.0×10-6g/mL范围内与发光强度呈良好的线性关系;检出限(3σ)为2.0×10-10g/mL;相对标准偏差为2.3%(n=11,1.0×10-8g/mLS2-)。该方法用于环境水样中S2-的测定,结果令人满意。     

钒(Ⅴ)-亚铁氰化钾-鲁米诺化学发光体系测定钒

本文利用钒(Ⅴ)-亚铁氰化钾-鲁米诺化学发光体系建立了痕量钒的化学发光测定法。方法检出限是2×10~(-10)g/mL钒,线性范围是4×10~(-10)～1×10~(-7)g/mL钒,测定的相对标准偏差小于2%,考察了26种常见离子的干扰情况。方法已用于水样中痕量钒的测定。     

流动注射化学发光分析法测定三类磺胺类药物

研究发现可溶性锰(Ⅳ)氧化磺胺类药物(磺胺甲基异口恶唑、磺胺嘧啶和磺胺脒)可以产生弱的化学发光,甲醛对这一化学发光反应有较强的增敏作用,据此建立了一种测定磺胺类药物的流动注射化学发光分析法。该方法对3种磺胺类药物磺胺甲基异口恶唑、磺胺嘧啶、磺胺脒的检出限分别为2×10-8、3×10-8、2×10-8g/mL;线性范围分别为6.0×10-8~1.0×10-5、1.0×10-7~8.0×10-6、4.0×10-8~8.0×10-6g/mL。对6.0×10-6g/mL磺胺甲基异口恶唑、4.0×10-6g/mL磺胺嘧啶和4.0×10-6g/mL磺胺脒的相对标准偏差分别为1.1%、1.2%和2.2%(n=11)。此法已用于复方新诺明片剂中磺胺甲基异口恶唑的测定,结果与药典方法测定值一致。并对化学发光反应的机理进行了探讨。     

流动注射化学发光抑制法测定吡罗昔康

基于吖啶橙在氢氧化钠介质中能被高锰酸钾氧化产生较强的化学发光,吡罗昔康能强烈抑制其化学发光,建立了高锰酸钾-吖啶橙-吡罗昔康化学发光抑制测定吡罗昔康的新方法。吡罗昔康在1.0×10-5~7.0×10-4g/mL范围内与化学发光强度呈良好线性关系,方法的检出限为4.5×10-6g/mL,对1.0×10-5g/mL吡罗昔康连续进行6次测定的相对标准偏差为3.6%。     

无机偶合反应化学发光分析 Ⅱ.H_2O_2-Na_2S_2O_3-鲁米诺体系测定痕量钼

本文将钼催化过氧化氢氧化硫代硫酸钠的反应与鲁米诺-H_2O_2化学发光反应相偶合,建立了痕量钼的无机偶合反应化学发光分析法。此方法的检出限是1.2×10~(-10)g/ml钼,相对标准偏差为2.7％(对5×10~(-9)g/ml钼11次测定),工作曲线的线性范围为1×10~(-9)～1×10~(-3)g/ml。此法巴成功地用于天然水中痕量钼的测定。     

流动注射化学发光法测定安痛定注射液中的氨基比林

在甲醛存在下 ,高锰酸钾与氨基比林能够发生化学发光反应 ,产生很强的化学发光 ,据此采用流动注射技术建立了一种测定氨基比林的化学发光分析法。方法的检出限为 3 .0× 10 -8g/mL ,相对标准偏差为 1.3 % (4 .0× 10 -6g/mL氨基比林 ,n =11) ,线性范围为 1.0× 10 -7～ 8.0× 10 -5g/mL氨基比林。该法已用于安痛定注射液中氨基比林含量的测定。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.