Estimation of distribution of vinyl groups in micron-sized monodisperse polymer microspheres by bromine titration method

The distribution of vinyl groups in polystyrene/poly(styrene-divinylbenzene) (PS/P(S-DVB)) composite microspheres produced by seeded copolymerization of S and DVB in the presence of 2.1-m monodisperse PS seed particles was estimated from the amount detected with bromine titration method as a function of the reaction time under various conditions.Part CXXIII of the series Studies on Suspension and Emulsion.     

Formation of monodisperse poly(1-methacryloxybenzotriazole) particles by radiation-induced dispersion polymerization

Radiation-induced dispersion polymerization of 1-methacryloxybenzotriazole (MABt) in ethyl propionate starts as homogeneous mixture and the resulting polymer precipitates as spherical particles. Formation, size, and shape of polymer particles are strongly dependent on the initial monomer concentration. Three regions can be distinguished: formation of deformed particles at concentrations of 15 w/v-% MABt; formation of spherical particles at concentrations from 18 to 35 w/v-% MABt; no precipitation of polymer at concentrations of 40 w/v-% MABt. The spherical particles at 20 w/v-% MABt had a diameter of 0.54 ± 0.31 m for 3 kGy irradiation and 2.93±0.68 m for 30 kGy. The number distribution of the microspheres shows that the spherical particles with small sizes formed at low irradiation dose (low conversion) disappears with increasing irradiation dose because of multi-coating by newly produced polymer.     

Preparation of micron-size monodisperse polymer microspheres having cationic groups

Micron-size monodisperse crosslinked polymer microspheres having chloromethyl groups were prepared by seeded copolymerization of styrene, divinylbenzene, and chloromethylstyrene in the presence of 2.1- monodisperse polystyrene seed particles produced by dispersion polymerization. The modification reaction of chloromethyl groups on the surfaces with polyamines such as triethylenetetramine and ethylenediamine was carried out. From the measurements of potential and the amount of chloride ion released, the introduction of a large number of cationic groups at the surfaces was confirmed.Part CXXXI of the series Studies on suspension and Emulsion.     

Production of anomalously shaped carboxylated polymer particles by seeded emulsion polymerization

Anomalous polymer particles with a partial protuberance like octopus ocellatus were produced under alkaline conditions by seeded emulsion copolymerization for styrene and butyl acrylate, with styrene-butyl acrylate-methacrylic acid terpolymer emulsion as seed. The mechanism of production of the polymer particles was studied. By transmission electron microscopic observation of the particles at each conversion, it was observed that the anomalous polymer particles were produced by partial growth of each of the individual seed particles throughout polymerization. Ionization of the carboxyl groups and low viscosity in the growing particles during the process of polymerization were important factors for partial growth.Part CIII of the series Studies on Suspension and Emulsion.     

The acceleration of decomposition of potassium persulfate in the presence of sodium dodecyl sulfate and polymer particles as a model of emulsion polymerization system

The decomposition rates of potassium persulfate (KPS) in aqueous solutions containing sodium dodecyl sulfate (SDS) in the presence of polystyrene or poly(methyl methacrylate) particles as models of emulsion polymerization systems were measured by isotachophoresis. Free SDS molecules dispersed in the monomolecular state had an ability to accelerate the KPS decomposition, but SDS molecules adsorbed onto the polymer particles did not accelerate it.Part CXX of the series of Studies on Suspension and Emulsion     

Effect of thick fixed-charge layers on electrostatic interaction — a theoretical approach

The electrostatic interaction pressure of charged surface layers is considered qualitatively and quantitatively. In the case of mutual penetration of the surface layers in addition to Maxwell stress and osmotic resp. hydrostatic pressure an isotropic stress on the fixed charges carrying molecules of the surface layers has to be taken into account. The derivation of the pressure-distance equations is given starting from both thermodynamic/electrostatic and hydrostatic/electrostatic principles. A possible biological significance of the additional stress is discussed emphasizing its role in modifying the structure of surface layer molecules.List of symbols e ₀ elementary charge - k Boltzmann constant - n _i concentration of theith ionic species in the bulk solution - P hydrostatic pressure - P hydrostatic pressure in the bulk volume (× ) - P ^h integration constant, independent on ×:P ^h =P(h) - T absolute temperature - Z _i electrovalence of theith ionic species - thickness of the surface layer - , ₀ relative and absolute permittivities - II(×) osmotic pressure at position × - II osmotic pressure in the bulk solution (× ) - osmotic pressure in the symmetry plane of interacting identical surface layers (electric field strength equals zero) - integration constant, independent on ×: - _e ^h electrostatic component of the disjoining pressure _e ^h = _e (h) - (×) mobile charge density profile (cations and anions of the electrolyte) - (×) fixed charge density profile - ^t(x) total charge density profile ( ^t = +) - ¹(x) fixed charge density profile of one of the two surface layers ( ¹(×) 0 for 0×) - (×) electric potential profile     

Phase behavior and dynamic properties in mixed systems of anionic and cationic surfactants: lithium perfluorooctanesulfonate/diethanolheptadecafluoro-2-undecanolmethylammonium chloride (DEFUMAC) and lithium dodecyl sulfate/DEFUMAC aqueous mixtures

Two ternary phase diagrams of the cationic perfluorosurfactant diethanolheptadecafluoro-2-undecanolmethylammonium chloride (DEFUMAC) with an anionic perfluorosurfactant lithium perfluorooctanesulfonate (LiFOS) and an anionic hydrocarbon surfactant lithium dodecyl sulfate (LiDS) have been established at 25°C. The total surfactant concentration was less than 20wt%. In a wide mixing region of the LiFOS/DEFUMAC system, a lamellar-type phase,P , was identified by its texture under a polarization microscope and by its x-ray diffraction pattern. Dispersed fragments ofP -phase are present in the dilute solutions in which one surfactant was in excess. The anisotropy of electrical conductivity, flow birefringence, dynamic light scattering, and electric briefringence demonstrate that theP fragments are disk-like with a radius of 0.7 m. The disk-likeP particles are transformed by shear into a spherical aggregate ofL above a critical shear gradient. LiDS/DEFUMAC mixed solution forms dispersed and precipitatedL in the dominant region. Radius and micropolarity of the dispersedL aggregates are decreased as the ratio of LiDS:DEFUMAC approaches 1:1. On the basis of x-ray diffraction measurement the structure of precipitatedL -phase seems to consist of monolayers.     

Preparation of micron-size monodisperse polymer particles by seeded polymerization utilizing the dynamic monomer swelling method

Utilizing a new type of monomer swelling method, 6.1 m-size monodisperse polymer particles were prepared by seeded polymerization. 1.8 m-size monodisperse polystyrene (PS) seed particles (1.8 m in size) were prepared by dispersion polymerization in ethanol-water (80/20, v/v) medium in the presence of poly(acrylic acid) as stabilizer with 2,2-azobisisobutyronitrile as initiator. The PS seed dispersion was mixed with ethanol-water (60/40, v/v) solution dissolving styrene (S) monomer, benzoyl peroxide as initiator, and poly(vinyl alcohol) as stabilizer. By slow, continuous, dropwise addition of water with a micro feeder into the mixture, the PS particles absorbed the many S monomers, which were separated from the medium and swelled from 1.8 m to 8.4 m while keeping the monodispersity high. We named this procedure the dynamic swelling method. Then, the seeded polymerization of the absorbed S monomer was carried out in the presence of NaNO₂ as water-solube inhibitor.Part CXXII of the series Studies on Suspension and Emulsion.     

Dielectric properties of cleaned and monodisperse polystyrene latexes in microwaves

The dielectric behavior (, ) of three well-cleaned monodisperse polystyrene latexes having the same particle size and the same number of chemically-bound surface groups has been studied at a fixed microwave frequency (9.4 GHz), as a function of temperature and surface group (SO ₄ ^– , COO^–, OH).A large dielectric relaxation was observed in the sulfate-stabilized latex, which has the most polar surface end-group. The anomalous behavior in the thermal dependence of the hydroxyl and carboxyl-stabilized latexes (the OH latex being more pronounced than the COO^– latex) may originate from differences in the experimental conditions used for the preparation of such polymer colloids, or due to the presence of ionic species.On the basis of various dielectric models, the apparent volume fractions of the latexes were calculated. The amount of bound water around the latex particle was quantitatively correlated to the polarity of surface end-group (SO ₄ ^– > COO^– > OH). The differences between the calculated and actual values were not only a reflection of the thickness of vicinal water, but could also be indicative of the presence of oligomeric species in the suspension's medium (serum) of the latex. The permittivities of hydrated particle and of bound water were obtained with a non-linear iterative procedure.     

Monte Carlo simulation of a lattice model for ternary polymer mixtures

Monte Carlo studies of symmetrical polymer mixturesAB, modelled by selfavoiding walks withN _A =N _B =N steps on a simple cubic lattice, are presented for arbitrary concentrations of vacancies _v in the range from _v =0.2 to _v =0.8 and chain lengthsN64. We obtained the phase diagrams and the equation of state for three choices of the ratio / _AB ( being the energy between monomers of the same kind, _AB being the energy between different monomers). Flory-Huggins theory provides only a qualitative understanding of these results. If the equation of state is fitted with an effective Flory-Huggins parameter _eff , the latter turns out to be strongly dependent on both concentration and temperature.Contributed paper delivered at the Tagung der Deutschen Physikalischen Gesellschaft, Fachausschuß Polymerphysik, Berlin, March 30–April 3, 1987.     

Capillary rise of liquids in rectangular tubings

The capillary rise of liquids was investigated in square capillary tubings of different dimensions (e. g. 300 m · 300 m to 1000 m · 1000 m) in the temperature range 25° to 35°C.The data were fitted to an equation:=1/2 · ·g · (S · (C ·H/2 +C ·S)) where is the surface tension of the liquid,S is the side length of the square tubing,H is the capillary rise,C (= 1.089) is a capillary constant.     

Potential theory in the problems of interfraction at small gap widths. A solid sphere and a droplet

A solid sphere approaches a spherical droplet at small gap widths. The radii of the particles are identical. Potential theory is applied and the problem of interaction brought to the solution of an integrodifferential equation for radial velocity at the droplet/ thin layer interface. Asymptotic formulae are reported for interface velocity and drag force for small and large viscosity ratios. The results are compared with the solutions for a solid sphere and flat tangentially mobile interface. Thus, two major effects may be distinguished: opening of the gap and curving of the streamlines inside the droplets. The latter is shown to cause a relative increase in the drag force.     

Production of anomalous polymer microspheres having uneven surfaces by “stepwise” heterocoagulation technique

Anomalous polymer microspheres having uneven surfaces were produced by stepwise heterocoagulation technique of small polymer particles (SPs) onto large polymer particles (LPs).SPs andLPs have surface charges opposite to each other in the emulsion states.SPs were produced by emulsion copolymerization of styrene and methacryloyloxyethyltrimethylammonium chloride, andLPs by emulsion terpolymerization of styrene, butyl acrylate and methacrylic acid, with nonionic emulsifier being used in both cases. Maximum covering ofLP bySPs was obtained under the conditions that both emulsions were blended without the coagulation at pH 3 at room temperature and then left stand to coagulate with each other at 70 °C for 4 h at pH 9.Part CXI of the series Studies on Suspension and Emulsion.     

Study of the polymer latex coalescence by dielectric measurements at microwave frequency—feasibility of the method

The measurement of the complex dielectric constant ( ^*=–j) in the dipolar absorption domain of the free water molecule (microwave region) permits us to follow quasi-specifically and precisely the water circulation during the coalescence process of a latex. Weight losses and dielectric constants variations have been simultaneously recorded upon latex drying, in a resonant cavity at 5 and 9 GHz and under controlled atmosphere and temperature. Two different latexes were studied (polybutylacrylate (PBuA) and polystyrene (PS)) from which the glass transition temperature effect was investigated. It is found that the harder the polymer particles, the more clearly evidenced the flocculation and packing points are. This method appears to be quite reliable for discriminating the various steps in the film formation process of latexes.     

An investigation of micro-brownian motions in polydimethylsiloxane by complementary incoherent-neutron-scattering and nuclear-magnetic-resonance experiments below room temperature

Two different experimental methods, neutron scattering and nuclear magnetic resonance are used to investigate the random methyl group and segmental rotational jump motions in polydimethylsiloxane. It is shown that nuclear magnetic relaxation and line width experiments are complementary to incoherent neutron scattering fixed-window experiments, the principle of the fixed-window experiments being discussed in somewhat detail. Satisfactory agreement of these experimental techniques is achieved as to the determination of the two model parameters of the motional processes in question, i. e. the activation energy and the preexponential factor of the Arrhenius ansatz made for the correlation time or jump time, respectively.Contribution partly presented during the meeting of the Macromolecular Club, June 8–10, 1983 in Uppsala, the spring conference of the Deutsche Physikalische Gesellschaft, March 12–17, 1984 in Münster and the Fourth International Seminar on Polymer Physics, October 22–26, 1984 in Eyba (GDR).     

Dielectric properties of moist CaCO3 filled polyethylene composites

The capacitance and the dielectric loss tangents of CaCO₃ filled polyethylene composites were studied. Composite samples, prepared by polymerizing ethylene on the surfaces of fillers, pre-treated by polymerization catalysts, were compared to normal mechanical mixtures. Dielectric dispersion,, and loss, , proved to be sensitive to heating or vacuum treatment. Investigation of samples under conditions of different relative humidities showed that the dielectric dispersion is due to adsorbed water. Both and increased with decreasing frequency and the ratio of loss and dispersion was nearly constant. Dielectric data measured at different relative humidities could be represented by a single Cole-Cole plot. Samples soaked in water for different periods yielded qualitatively similar but quantitatively different Cole-Cole plots. Composite samples showed higher losses at similar humidities.Possible interpretations in terms of a molecular relaxation model, an interfacial relaxation model, including a charged double layer mechanism, percolation theory and the universal response theory were examined, but none was able to fully explain the observed phenomena.     

Formation of multihollow structures in crosslinked composite polymer particles

Micron-size monodisperse polymer particles having multihollow structures were prepared as follows. First, micron-size monodisperse polystyrene/poly(styrene-divinylbenzene) (PS/P(S-DVB)) composite particles were produced by seeded copolymerization of S and DVB with 2,2-azobisisobutyronitrile as an initiator in the ethanol/water (76/24, weight ratio) medium in the presence of 2.37 m-size monodisperse PS seed particles produced by dispersion polymerization. The molar ratio of S/DVB was changed in the range of 1/110/1. The uncrosslinked polymer within the composite particles was extracted with toluene under reflux. For the highest DVB content (S/DVB=1/1, molar ratio), one large hollow was observed in a part of the composite particles after the extraction. For the middle DVB content (S/DVB=4/1, molar ratio), multihollow structure was observed in all the particles. For the lowest DVB content (S/DVB=10/1, molar ratio), fine multihollow structure was observed in all the particles.Part CXLIII of the series Studies on Suspension and Emulsion     

SAXS study of core-shell colloids

Polymeric core-shell systems were produced by a two-stage emulsion polymerization technique under fixed conditions: i) monodisperse seed latex with a sufficiently high particle number; ii) starved monomer-II addition; iii) water-soluble initiator; iv) incompatibility of core and shell polymer. From electron micrographs, it is not possible to determine where the second polymer is located within these two-stage emulsion polymers. The internal structure of the particles can be detected by small-angle x-ray scattering. The results indicate that; i) the emulsion polymerization process takes place in a small surface layer region of the seed particles, and ii) a small interfacial layer exists between the core and shell polymer.Part 6 of Polymerizations in the Presence of Seeds     

Solubilization of oleyl alcohol by pure and mixtures of surfactants

The solubilization behavior of oleyl alcohol by pure and mixtures of surfactants systems have been studied in terms of the maximum additive concentration (MAC), the solubilizing power, and the particle sizes of micelles with or without oleyl alcohol. The surfactants used are amphoteric (N,N-dimethyl-N-lauroyl lysine, DMLL; N,N,N-trimethyl-N-lauroyl lysine, TMLL; N,N-dimethyl-N-(carboxymethyl)-lauryl ammonium, DMCL), anionic (sodium dodecyl sulfate, SDS) and nonionic (alkyl polyoxyethylene ethers).The maximum additive concentration of oleyl alcohol by pure surfactants is larger by nonionic surfactants than by others.For a nonionic surfactant system mixed with DMLL, the mixing effect of surfactant on the increase in the MAC is not recognized. While, for DMLL mixed with SDS, the MAC becomes larger than that by pure surfactants. This may be attributed to the fact that the large micellar size will result in increasing the maximum additive concentration.     

Phase separation in colloidal dispersions with nonadsorbing polymer

The influence of the volume restriction effect on phase separation in colloidal dispersions consisting of a nonadsorbing polymer has been studied using statistical mechanical cell models and perturbation theories in combination with Monte Carlo experiments. The attractive interparticle potential proposed by Asakura and Oosawa is used to represent the effect of polymer depletion between the particles. The equilibrium properties are determined using the cell model for the solid-like phase (with Monte Carlo simulations for the structure of the solid phase) and a perturbation theory for the liquid-like phase. Both aqueous and nonaqueous dispersions are considered, and the phase separation behavior predicted is compared with available experimental and theoretical results.