Adsorption of Nin (n=1 -4) clusters on perfect and O-defective CuAl2O4 surfaces: A DFT study

The adsorption energies for single Ni atom on CuAl₂O₄(100) and (110) surfaces are 5.30 and 4.08 eV, respectively. The growth and aggregation of Ni can be effectively inhibited on the perfect CuAl₂O₄(100) surface. The adsorption of Ni on the spinel surface is accompanied by charge transfer. The interaction of Ni with CuAl₂O₄ surface is stronger than with the γ-Al₂O₃(110) surface.     

CeO2对CuCl/活性炭吸附剂C2H4/C2H6吸附分离性能促进作用

通过等体积浸渍方法制备了添加CeO₂助剂的用于C₂H₄/C₂H₆吸附分离的CuCl/活性炭(AC)吸附剂,使用氮气吸附-脱附曲线、X射线衍射(XRD)、X射线光电子能谱(XPS)、扫描电子显微镜(SEM)、能量分散X射线光谱(EDX)等分析方法对吸附剂进行了表征.结果表明,吸附剂表面Cu(II)在氮气气氛焙烧过程中被部分还原成Cu(I).重点研究了Ce元素的添加对于吸附剂的C₂H₄/C₂H₆吸附分离性能的影响,等温吸附曲线结果表明添加了CeO₂的吸附剂通过降低乙烷的吸附容量从而显著提高了吸附分离性能. XRD及XPS结果表明,和未添加助剂样品相比,其表面晶体团簇较小,分散性更好, Cu(II)还原程度更高.添加CeO₂的吸附剂样品5Ce50Cu(CeO₂和CuCl2的质量分数(w)分别为5%和50%)获得了最好的吸附分离效果,相对于未添加CeO₂的样品50Cu,其在660 kPa下的吸附选择性由4.2提升到8.7.     

Ca掺杂的CeO2模型催化剂的形貌和电子结构及其与CO2分子的相互作用

利用扫描隧道显微镜、X射线光电子能谱和同步辐射光电子能谱研究了CeO₂(111),部分还原的CeO_2-x(111) (0＜x＜0.5)以及Ca掺杂的CeO₂模型催化剂的形貌、电子结构以及它们与CO₂分子间的相互作用。CeO₂(111)和部分还原的CeO_2-x(111)薄膜外延生长于Cu(111)单晶表面。不同Ca掺杂的CeO₂薄膜是通过在CeO₂(111)薄膜表面室温物理沉积金属Ca及随后真空退火到不同温度而得到的。不同的制备过程导致样品具有不同的表面组成,化学态和结构。CO₂吸附到CeO₂和部分还原的CeO_2-x表面后导致表面羧酸盐的形成。此外,相比于CeO₂表面,羧酸盐物种更易在部分还原的CeO_2-x表面生成,而且更加稳定。而在Ca掺杂的氧化铈薄膜表面,Ca²⁺离子的存在有利于CO₂的吸附,且探测到碳酸盐物种的形成。     

放射性碘分子在Cu2O表面的吸附:第一性原理密度泛函研究

采用第一性原理密度泛函计算方法和周期性平板模型系统研究了放射性碘分子在Cu₂O三个低指数表面的吸附行为。通过计算若干平衡吸附构型的结构参数和吸附能评估了不同特征吸附位的作用。构型优化计算表明所选晶面存在适度的结构弛豫。计算结果表明,与Cu₂O（110）表面相比,Cu₂O（100）和（111）晶面表现出更高的碘分子吸附反应活性。其中,表面氧原子位（O_S）和配位未饱和铜原子位（Cu_CUS）分别为Cu₂O（100）和（111）晶面的能量最优吸附位点。此外,针对几种典型吸附结构计算分析了其电子结构信息,以进一步阐明吸附体系之间的相互作用机理。     

Reactions of 2-phenylpyrrole with bromobenzoylacetylene on metal oxides active surfaces

The solvent-free interaction of 2-phenylpyrrole with bromobenzoylacetylene (room temperature) upon their grinding with solid metal oxides (MgO, CaO, ZnO, BaO, Al₂O₃, TiO₂, ZrO₂) and salts (CaCO₃, ZrSiO₄) leads to either the cross-coupling product or the adduct of pyrrole addition to the riple bond of acetylene. The ethynylation is accompanied by the formation of intermediate and side products: E-2-(1-bromo-2-benzoylethenyl)-5-phenylpyrrole and 1,1-di(5-phenylpyrrol-2-yl)-2-benzoylethene. The activity of the metal oxides in the ethynylation reaction falls in the order (in the brackets, the content of 2-benzoylethynyl-5-phenylpyrrole in the reaction mixture is given): ZnO (81%), BaO (73%), Al₂O₃ (71%), MgO (69%), CaO (50%). The oxides, SiO₂, TiO₂, ZrO₂, and the salts, CaCO₃ and ZrSiO₄, are inactive in the ethynylation reaction affording only the intermediate adduct, with ZrO₂ the isolated yield of the bromoethenylpyrrole reaching 60%. ESR monitoring shows the reaction to start from one electron transfer from pyrrole to acetylene mediated by the oxide surface. The adduct is readily converted on Al₂O₃ to 2-(benzoylethynyl)-5-phenylpyrrole crystallized mostly as cis-rotamer (X-ray data).     

光沉积法合成纳米金属Pd负载的MCM-TiO2及其光催化性质研究

用光沉积方法由PdCl₄^2-和Ti修饰的MCM-41合成了纳米钯团簇Pd/MCM-TiO₂,用XPS,N₂吸脱附等温线,UV-Vis和Raman光谱对其结构进行了表征.将该团簇用于苯酚的光降解和Cr(Ⅵ)还原为Cr(Ⅲ)的反应中,表现出较高的光催化活性.     

Electron energy loss studies of room-temperature co adsorption on Cu(100) induced by electron or ion irradiation

A custom-built multi-technique portable spectrometer was used to study the vibrational (and electronic) excitations associated with the “anomalous” CO adsorption recently observed on clean and oxidized Cu(100) surfaces at room temperature. Results from the electron energy loss (and thermal desorption) experiments have provided strong evidence for in-situ CO production induced by low-energy electron or ion irradiation of CO or C₂H₄ on Cu(100). In particular, the C-O vibrational stretch frequency for the room-temperature CO adsorption was found to be red-shifted by 9 meV from its nominal position (259 meV) and could be observed even at temperature as high as 420 K. Several plausible mechanisms involving coadsorbate interactions with CO on metal surfaces have been discussed. A direct interaction model involving partial bonding between CO, adsorbed on an atop site, and a coadsorbed O atom in a four-fold hollow site was found to be adequate in explaining the observed red shift and the apparent stabilization of CO on Cu(100) at room temperature.     

鳞状BiOBr/Bi2WO6的合成及其吸附性能

采用一步水热法成功制备鳞状形貌的BiOBr/Bi₂WO₆复合物,通过X射线衍射（XRD）仪、扫描电子显微镜（SEM）、N2吸附/解吸附比表面测定仪（BET）、傅里叶变换红外（FT-IR）光谱等对复合物进行了表征。对比Bi₂WO₆与BiOBr的SEM照片,结合KBr的浓度实验,提出了BiOBr/Bi₂WO₆的鳞状形貌的形成机理。选取有机染料为吸附质,BiOBr/Bi₂WO₆为吸附剂进行了复合物吸附性能测试。结果表明,BiOBr/Bi₂WO₆对阳离子染料表现出优越的吸附性能,10 min对次甲基蓝（MB）的吸附率高达99%,优于常规的活性炭吸附剂。此外,BiOBr/Bi₂WO₆对有机染料的吸附行为符合准二级反应速率方程和Freundlich等温吸附模型。     

单层石墨相氮化碳负载Pt4团簇吸附O2的第一性理论研究

采用第一性原理密度泛函理论结合周期性平板模型模拟研究了Pt₄团簇吸附单层石墨相氮化碳(g-C₃N₄)的几何结构和电子性质,以及氧气在其表面上的吸附行为。同时,对比分析了氧气在纯净的石墨相氮化碳和Pt₄团簇上的吸附行为。计算结果表明, Pt₄团簇吸附在3-s-三嗪环石墨相氮化碳表面,并与四个边缘氮原子成键,形成两个六元环时为最稳定构型。Pt₄团簇倾向于吸附在三嗪环石墨相氮化碳的空位并与邻近三个氮原子成键。由于Pt与N原子较强的杂化作用,以及金属与底物之间较多电子转移增强了Pt₄团簇吸附g-C₃N₄的稳定性。另外,对比分析了氧气在纯净的g-C₃N₄和金属吸附的g-C₃N₄上吸附行为,发现金属原子的加入促进了电子转移,同时拉长了O―O键长。Pt₄吸附3-s-三嗪环g-C₃N₄比Pt₄吸附三嗪环g-C₃N₄表现出微弱的优势,表现出明显的基底扭曲以及较大的吸附能。这些结果表明,化学吸附通过调节电子结构和表面性质增强催化性能的较好方法。     

Adsorption of polyacrylic acid on aluminium oxide: DRIFT spectroscopy and ab initio calculations

Diffuse reflectance Fourier transform infrared (DRIFT) spectroscopy was used to study the adsorption process of the water-soluble polyacrylic acid (PAA) polymer on hydrous δ-Al₂O₃. Vibrational assignment of PAA, sodium polyacrylate, (Na–PA) and the PA-oxide surface complex was achieved by comparison of observed band position and intensity in the DRIFT spectra with wavenumbers and intensities from ab initio quantum mechanical calculations. The presented data of polyacrylic acid suggest that IR data calculated ab initio on relatively short oligomers (quantum-mechanical oligomer approach) may provide valuable information regarding the interpretation of polyelectrolyte infrared spectra. Batch adsorption experiments were performed to sorb PAA onto the δ-Al₂O₃ surface. The results obtained from DRIFT studies were compared with adsorption isotherm experiments in order to relate the level of PAA coverage to the nature of the surface complex. Ab initio molecular orbital calculations on PAA/Al₂O₃ clusters were used to model possible surface complexes. Strong correlation were found between theoretical and observed DRIFT frequencies of the antisymmetric R-COO⁻ vibration. A number of possible configurations of the polyacrylic acid/aluminate surface complex were tested via ab initio calculations. These possible configurations included different di-aluminium octahedral Al³⁺ surface models. Results obtained from adsorption isotherm experiments, DRIFT spectra and ab initio calculations indicate that the carboxylate oxygens bridge an Al³⁺-octahedral dimer [Al₂(OH)₂4(H₂O)2(OH)] in a ligand-exchange inner sphere complex.     

Voltammetry and XPS analysis of a chalcopyrite CuFeS2 electrode

A chalcopyrite CuFeS₂ electrode obtained from the “El Teniente” mine (Chile) has been studied by cyclic voltammetry (CV) in a borax alkaline solution at pH 9.2 and by X-ray photoelectron spectroscopy (XPS) before and after the electrochemical treatment at oxidation and reduction potentials. The voltagram shows two peaks in the positive sweep direction which can be assigned to an oxidation process at the electrode surface that involve the formation of Fe₂O₃ and CuO giving rise to an irregular surface layer of the electrode with islands of different chemical composition. The XPS results confirm the formation of Fe₂O₃ and CuO at the electrode surface and their stability against decomposition at reduction potential. In addition, the formation of FEOOH, CuFeO and CuS species at the electrode surface can be deduced by XPS as well as a covering of the whole electrode surface by species due to carbon–oxygen groups.     

KMnO4溶液改性半焦对烟气中气态Hg0的吸附性能研究

在小型固定床实验台上利用半焦及其KMnO₄溶液改性样品进行气态Hg⁰吸附实验。结果表明,在低温时原料半焦对气态Hg⁰具有良好的吸附性能,升温则使其吸附性能迅速降低;经高锰酸钾溶液浸渍处理后,改性半焦在高温140 ℃时吸附性能明显提高,对浸渍样品在250 ℃进行热处理可使其吸附性能进一步提高。BET结果表明,原料半焦具有较发达的微孔结构,改性处理使微孔比例下降,孔隙结构发达程度降低;XPS测试表明,改性半焦表面的汞主要以氧化态(Hg²⁺)形式存在,高价锰化合物(KMnO₄、K₂MnO₄、MnO₂)是主要的氧化活性物质。     

柠檬酸盐凝胶法制备纳米CuO-ZnO-ZrO_2的工艺分析及CO_2加氢制甲醇的性能

采用柠檬酸盐凝胶法制备出纳米CuO-ZnO-ZrO_2(CZZ)催化剂,应用XPS、BET、XRD、H_2-TPR、H_2-TPD、CO_2-TPD和TG-DTA等检测手段对催化剂及前驱体的结构进行表征。研究了湿凝胶干燥时间和柠檬酸用量对催化剂结构的影响,并与燃烧法制得的催化剂进行对比,考察了不同催化剂CO_2加氢制甲醇的性能。研究表明,延长湿凝胶干燥时间可有效防止催化剂焙烧时发生喷溅,有利于催化剂中各组分的分散,提高催化剂对H_2和CO_2的吸附能力;112℃干燥48h制得的催化剂(CZZ-48h)BET比表面积为43.5m~2/g,高于燃烧法;柠檬酸用量等于化学计量比时催化剂的性能最佳,在240℃、2.6MPa、空速为3600h-1、H_2/CO_2(体积比)为3的条件下甲醇时空收率达109.4g/(kg·h);柠檬酸过量会影响催化剂组分的分散度,并造成分解残留覆盖催化剂表面活性位而不利于CO_2加氢反应。     

Concerning the crystal structure of BrF3·AuF3

Crystals of the adduct, BrF₃·AuF₃, are monoclinic, with: a=5.356(4) Å, b=5.766(4) Å, c=8.649(3) Å, β=101.39(4)°, V=261.8(5) Å³, z=2, D_c=4.96 g/cm³. An ordered structure in P2₁ was found, but is of low precision (R₁=0.082) because of crystal deformation. The structure has planar BrF₄ units sharing F ligands cis with planar AuF₄ groups, each AuF₄ being similarly linked to two BrF₄. This generates a ribbon, creased at the bridging F along y, the gold on one side of the crease, the bromine on the other. Such ribbons are stacked parallel along y, with nearest neighbors related by twofold screw axes. This sandwiches each AuF₄ strip of a ribbon symmetrically between like strips. These contacts between the Au-strips bring up, to each Au-atom, two “non-bridging Au–F ligands” of each of the two neighboring strips, to give eight coordination in F. The bromine side of the creased ribbon is unsymmetrically sandwiched between a screw-axis related relative, and the edge of a Au-containing strip oriented almost perpendicular to it. This brings two non-bridging F of the nearest-strip BrF₄ and two non-bridging F of the AuF₄ strip into the secondary cordination sphere of the Br atom. Raman spectra of the BrF₃·AuF₃, molecular BrF₃, and polymeric AuF₃ suggest that the Br–F and Au–F stretching vibrations of BrF₃·AuF₃ are shifted slightly from those of the parent BrF₃ and AuF₃, and indicate some BrF₂⁺AuF₄⁻ character.     

FeMn、FeMnNa和FeMnK催化剂上合成气制低碳烯烃的比较(英文)

研究了钠、钾助剂对FeMn合成低碳烯烃催化剂结构及性能的影响.低温N2吸附、X射线光电子能谱(XPS)、X射线衍射(XRD)、H2程序升温还原(H2-TPR)、CO/CO2程序升温脱附(CO/CO2-TPD)、M?ssbauer谱和CO+H2反应的研究结果表明,增加Mn助剂含量促进了活性相的分散和低碳烯烃的生成,而过多锰助剂在催化剂表面的富集则降低了费托合成反应的CO转化率;钾助剂和钠助剂的加入均抑制了催化剂的还原并且促进了CO2和CO的吸附.比较还原后(H2/CO摩尔比为20)和反应后(H2/CO摩尔比为3.5)催化剂的体相结构可以发现,在FeMn、FeMnNa和FeMnK催化剂中,由于钾助剂的碱性和CO吸附能力较强,因此体相中FeCx的含量相对较高;而活性测试结果表明,FeMnNa催化剂拥有最好的CO转化率(96.2%)和低碳烯烃选择性(30.5%,摩尔分数).     

利用原位APXPS与STM研究H2在ZnO(10${\rm{\bar 1}}$0)表面的活化

Cu/ZnO/Al₂O₃是工业中最广泛使用的甲醇合成催化剂。然而该催化反应的活性位点和机理目前仍存争议。H₂作为反应物之一,研究其在ZnO表面的活化和解离对于弄清甲醇合成反应的催化机理具有重要的帮助。本工作利用近常压光电子能谱(APXPS)和扫描隧道显微镜(STM)原位研究了H₂在ZnO(10${\rm{\bar 1}}$0)表面上的活化和解离。APXPS结果表明：在0.3 mbar (1 mbar = 100 Pa)的H₂气氛中,室温下ZnO表面形成羟基(OH)吸附物种。STM实验发现通入H₂后ZnO表面发生了(1×1)到(2×1)的重构。上述结果和原子H在ZnO(10${\rm{\bar 1}}$0)表面的吸附结果一致。然而吸附H₂O可以导致同样的现象。因此,我们还开展了H₂O在ZnO(10${\rm{\bar 1}}$0)表面吸附的对比实验。结果表明：H₂气氛中ZnO表面发生0.3 eV的能带弯曲,而H₂O吸附实验中几乎观察不到能带弯曲发生。同时,热稳定性实验表明H₂气氛中ZnO表面的OH不同于H₂O解离吸附产生的OH,前者具有更高的脱附温度。因此,本工作的结果表明常温和常压下H₂在ZnO(10${\rm{\bar 1}}$0)表面发生解离吸附。这一结果和以往超高真空下未发现H₂在ZnO(10${\rm{\bar 1}}$0)表面上的解离不同,说明H₂的活化是一个压力依赖过程。     

Evidence of lanthanum–chromium mixed oxides formed in CrOx/La2O3 model catalysts

CrO_x/La₂O₃ mixed oxides, prepared by impregnating La₂O₃ with appropriate aqueous solutions of (NH₄)₂CrO₄ and calcining at 600 °C for 4 h, have been investigated by means of XRD, TPR, XPS, DRIFTS, and Raman spectroscopy (RS). The formation of the compounds La₂CrO₆, La(OH)CrO₄ and LaCrO₄ under these conditions was evidenced. Strong peaks at 864, 884, 913, and 921 cm⁻¹, as well as weak peaks at 136, 180, 354, 370, and 388 cm⁻¹ in the RS spectrum of CrO_x/La₂O₃ have been assigned to La₂CrO₆.     

Synthesis and characterization of silver nanoparticle/kaolinite composites

Ag nanoparticles were synthetized in the interlamellar space of a layered kaolinite clay mineral. Disaggregation of the lamellae of non-swelling kaolinite was achieved by intercalation of dimethyl sulfoxide. The kaolinite was suspended in aqueous AgNO₃ solution and, after adsorption of Ag⁺, the ions were reduced with NaBH₄. The interlamellar space limits particle growth (d_ave=3.8–4.2 nm); however, larger silver particles may be formed on the exterior surface of kaolinite with d_ave=5.6–10.5 nm diameter. The diameter of the particles prepared in this way is depending on the initial AgNO₃ concentration. The silver nanoparticles prepared were characterized by UV–vis spectroscopy, X-ray diffraction (XRD), Small angle X-ray scattering (SAXS), X-ray photoelectron spectroscopy (XPS) and Transmission electron microscopy (TEM).     

Effects of potassium promoter on the performance of PdCl_2–CuCl_2/AC catalysts for the synthesis of dimethyl carbonate from CO and methyl nitrite

The effect of potassium(K) promoter on the catalytic performance of activated carbon(AC) supported Wacker-type catalysts(Pd Cl2–Cu Cl2/AC) for the synthesis of dimethyl carbonate(DMC) from CO and methyl nitrite(MN) was investigated by means of N2 adsorption, H2-temperature-programmed reduction(H2-TPR), and X-ray photoelectron spectroscopy(XPS). The experimental results showed that the space time yield of DMC on Wacker-type catalysts with different K promoters ranked in the following order: KCl KOH CH3 COOK K2CO3. Especially, the addition of KCl significantly improved the catalytic activities of Pd Cl2–Cu Cl2/AC catalyst for DMC synthesis from CO and MN. N2 adsorption data indicated that the addition of K promoters did not change the textural properties of Wacker-type catalysts greatly. H2-TPR and XPS results demonstrated that the existence of KCl promoted the reducibility of Cu2+species and increased the proportion of Cu2+species on catalyst surface, which is favorable for oxidizing Pd0 to active Pd2+. Further, the addition of KCl benefited the reactivity of Pd Cl2–Cu Cl2/AC catalyst for DMC synthesis from CO and MN.