AlmN2和AlmN2＋ (m＝1～8)团簇结构与稳定性的量子化学研究

用密度泛函理论(DFT)的B3LYP方法, 在6-311G*水平上对Al_mN₂和Al_mN₂^＋ (m＝1～8)团簇的几何构型、电子结构、振动频率和分子轨道进行了理论研究. 结果表明, Al_mN₂类团簇的基态结构有两种基本构型, 一种是以N—N键为核心周围与Al原子相配位形成的, 一种是由两个Al_nN (n≤m/2)分子碎片通过共用Al原子或Al—Al键相互结合形成的. 对Al_nN分子碎片相互结合形成结构的绝热电离能讨论得到, m为偶数的团簇比m为奇数的稳定.     

硼碳团簇BnC2 (n＝1～6)的理论研究

应用密度泛函理论在B3LYP/6-311＋G(d)水平上研究了硼碳团簇B_nC₂ (n＝1～6)的几何结构、生长机制和相对稳定性. 计算结果表明, 对于n＝2～6的簇, 平面多环状构型为最稳定的结构, 其中C原子分布于环的顶点、有尽可能多的三配位硼原子和尽可能多的B—C键. 碳原子作为杂原子倾向掺杂于团簇的顶点位置, 它的掺杂不改变硼团簇的主体结构. 与平面多环状结构相比, 随着簇尺寸的增大, 三维结构和线性链结构更不稳定. 在低能线性结构中, C原子位于链两侧的第二个位置. 计算的碎片分裂能、递增键能以及HOMO-LUMO能隙表明, B₄C₂为幻数簇.     

用密度泛函和遗传算法研究Cun (n≤20) 团簇的尺寸效应

结合遗传算法和Gupta多体势系统地搜索金属团簇Cu_n (n≤20)的几何结构, 并利用密度泛函方法进一步确定最稳定构型. 分析了平均键长、平均配位数、结合能、二阶差分能、电离势和电子亲和势等性质随着尺寸的变化规律. 发现在Cu₇处团簇最稳定构型从二维结构转向三维结构, Cu_n (n≤20)团簇的幻数为8, 13, 20. 团簇的键长、配位数和结合能属性随着尺寸的增长而递增最终接近相应的体相值; 而二阶差分能、电离势和电子亲和势随着尺寸增加出现奇偶交替, 说明偶数电子形成闭壳层结构, 比相邻团簇更稳定.     

(GaP)n和(GaP)n－ (n＝10～16)团簇的结构与稳定性研究

采用密度泛函理论B3LYP/Lanl2dz方法对(GaP)_n和(GaP)_n^－ (n＝10～16)团簇的一系列异构体的结构和稳定性进行了研究. 讨论了中性团簇得到一个电子之后, 几何结构和电子性质的变化. 频率分析预测出最强吸收峰位于341～390 cm^－1区域. 从能隙、结合能和能量二次差分等方面综合考虑, 具有T_h对称性的(GaP)₁₂和(GaP)₁₂^－分别是中性(GaP)_n和阴离子(GaP)_n^－团簇中最稳定的, 而具有T_d点群结构的(GaP)₁₆也比较稳定, 究竟哪种结构易于合成还有待于实验的进一步证实. 在相同理论水平上计算了基态(GaP)_n (n＝10～16)的绝热电子亲合势(AEAs)及其基态阴离子的垂直电离能(VDEs), 这对以后的实验数据分析将有一定的参考价值.     

基于密度泛函理论分析团簇ConMoS(n=1~5)电子性质、光学性质及磁性

为了从理论层面深入探究团簇Co_nMoS （n=1~5）的电子性质、光学性质及磁性,弄清其内在关联,依据拓扑学原理和密度泛函理论,在B3LYP/def2-TZVP量子化学水平和多个自旋多重度下对该团簇进行结构优化并分析。结果表明：团簇Co_nMoS共有21种稳定构型;通过对NPA （自然布居分析,natural population analysis）电荷、静电势、亲电指数、电离势、光学电负性和折射率等分析得出,金属原子有高概率失去电子,非金属原子相对更容易得到电子,团簇Co₅MoS中的构型5a在最稳定构型中有高的得失电子能力、反应活性和折射率,Co和Mo原子易发生亲核反应,S原子易发生亲电反应;对该团簇自旋布居数、原子磁矩、轨道磁矩和态密度分析发现,该团簇磁性主要由Co原子的d轨道提供,且团簇Co₃MoS表现出了比其它尺寸团簇更为稳定和优异的磁性。最终得出团簇Co₃MoS在磁性方面有较好的表现且构型5a在活性和光学领域有一定的潜力。     

基于密度泛函理论分析团簇ConMoS(n=1~5)电子性质、光学性质及磁性

为了从理论层面深入探究团簇 Co_nMoS(n=1~5)的电子性质、光学性质及磁性,弄清其内在关联,依据拓扑学原理和密度泛函理论,在B3LYP/def2-TZVP量子化学水平和多个自旋多重度下对该团簇进行结构优化并分析。结果表明：团簇ConMoS共有21种稳定构型;通过对NPA(自然布居分析,natural population analysis)电荷、静电势、亲电指数、电离势、光学电负性和折射率等分析得出,金属原子有高概率失去电子,非金属原子相对更容易得到电子,团簇Co₅MoS中的构型5a在最稳定构型中有高的得失电子能力、反应活性和折射率,Co和Mo原子易发生亲核反应,S原子易发生亲电反应;对该团簇自旋布居数、原子磁矩、轨道磁矩和态密度分析发现,该团簇磁性主要由Co原子的d轨道提供,且团簇Co₃MoS表现出了比其它尺寸团簇更为稳定和优异的磁性。最终得出团簇Co₃MoS在磁性方面有较好的表现且构型5a在活性和光学领域有一定的潜力。     

高活性固体碱Na2O/Al2O3-MgO的合成与表征

过量NaOH易引起铝离子流失,造成以Al₂O₃-MgO为载体的催化剂性能不稳定,为此以NH₃为沉淀剂制备了Mg-Al共沉淀物,进而通过Na₂CO₃浸渍、老化、焙烧处置,制备了Na₂O/Al₂O₃-MgO催化剂,借助XRD、SEM、SEM-EDS、TG-DSC、N₂吸附-脱附等手段对其结构及形貌进行表征,以蒜头果油甲酯化率对其活性进行评价,结果表明：采用共沉淀-浸渍的处理方法可以获得类水滑石片层结构的催化剂前驱体,该前驱体主要分解温度在200~500℃之间,经高温煅烧处理后所得催化剂中有Na-Al及Na-Mg-Al氧化物形成。制备高活性Na₂O/Al₂O₃-MgO催化剂的条件为：镁铝离子比n_Mg/n_Al=3∶1~1∶3、老化时间12 h、焙烧温度550℃、焙烧时间5 h。以n_Mg/n_Al=1∶1时制备的催化剂进行验证实验发现,所得催化剂比表面积为30 m²·g^-1、平均孔径为8.8 nm,是一种介孔催化剂,该催化剂在蒜头果油甲酯化实验中表现出高的催化活性,蒜头果油甲酯化率最高达到96.4%。     

CnBδ(δ=0, ±1; n =1～6)团簇的结构、稳定性和光谱

采用密度泛函理论(DFT)的B3LYP方法,在6-31G*和6-311＋G(3df)水平上对C_nB(n=1～6)团簇及其阴离子和阳离子的几何构型和电子结构进行了优化和振动频率计算.得到了C_nB(n=1～6)团簇的电离能,绝热电子亲合势以及C_nB^δ(δ=0,±1)团簇的能隙.结果表明C_nB^－(n=1～6)团簇的基态构型均为线形,这与等电子的C_n簇合物的结构是一致的; C_nB(n=1～6)团簇的基态构型中,除C₂B为不对称的三角形,C₆B为具有C_2v对称性的环状结构外,其余均为线形结构.阳离子团簇中n=2、3、6的基态结构具有C_2v对称性外,其它几个均为线形结构.从几何参数和振动频率上发现,采用密度泛函B3LYP方法在6-311＋G(3df)和6-31G*两种基组上计算得到的键长参数和振动频率非常接近,说明B3LYP方法在计算C_nB簇合物结构参数上对于基组的选择是不太敏感的.通过对C_nB(n=1～6)的光电子能谱性质的研究发现,C₄B容易获得一个电子形成阴离子团簇,但失去一个电子是很困难的,这与实验上观测到的结果非常吻合.     

过渡金属混合簇Nb2Rh2的密度泛函研究

采用密度泛函方法(DFT)研究了过渡金属混合簇Nb_mRh_n (m, n≤2) 的结构、稳定性规律及它们的成键情况. 结果表明, Nb—Nb键较强, Rh—Rh键较弱, 而Nb—Rh键的强度则介于两者之间. 在Nb₂Rh₂直线和折线构型中, 金属键有强弱交替的现象. Nb₂Rh₂的各种构型在自旋多重度较小时稳定.     

Aun (n＝2～20)团簇的遗传算法和密度泛函方法研究

在遗传算法和Gupta多体势系统地搜索金属团簇初始结构基础上, 应用密度泛函理论和基于局域密度近似 (LDA)或广义梯度近似(GGA)的超软赝势和投影扩充波(PAW)方法分别系统地研究了金属团簇Au_n (n≤20)的最稳定构型和电子性质. 发现LDA或GGA近似下, 最稳定构型存在一定的差异: LDA方法中, Au团簇最稳定构型从Au₇ 处就发生了从二维结构向三维结构的转化, 而GGA近似下Au₁₃的最稳定异构体仍然保持平面构型. 计算结果表明, 平均最近邻距、平均配位数和结合能随着尺寸的增大呈递增趋势, 而二阶差分能、费米能级、HOMO-LUMO能隙、垂直电离势和电子亲和势出现了明显的奇偶交替现象. 其结果丰富了目前对金团簇的理论和实验的研究.     

Sol-gel synthesis of K3InF6 and structural characterization of K2InC10O10H6F9, K3InC12O14H4F18 and K3InC12O12F18

K₃InF₆ is synthesized by a sol-gel route starting from indium and potassium acetates dissolved in isopropanol in the stoichiometry 1:3, with trifluoroacetic acid as fluorinating agent. The crystal structures of the organic precursors were solved by X-ray diffraction methods on single crystals. Three organic compounds were isolated and identified: K₂InC₁₀O₁₀H₆F₉, K₃InC₁₂O₁₄H₄F₁₈ and K₃InC₁₂O₁₂F₁₈. The first one, deficient in potassium in comparison with the initial stoichiometry, is unstable. In its crystal structure, acetate as well as trifluoroacetate anions are coordinated to the indium atom. The two other precursors are obtained, respectively, by quick and slow evaporation of the solution. They correspond to the final organic compounds, which give K₃InF₆ by decomposition at high temperature. The crystal structure of K₃InC₁₂O₁₄H₄F₁₈ is characterized by complex anions [In(CF₃COO)₄(OH_x)₂]^(5−2x)− and isolated [CF₃COOH_2−x]^(x−1)− molecules with x=2 or 1, surrounded by K⁺ cations. The crystal structure of K₃InC₁₂O₁₂F₁₈ is only constituted by complex anions [In(CF₃COO)₆]³⁻ and K⁺ cations. For all these compounds, potassium cations ensure only the electroneutrality of the structure. IR spectra of K₂InC₁₀O₁₀H₆F₉ and K₃InC₁₂O₁₂F₁₈ were also performed at room temperature on pulverized crystals.     

Phase relations in the K2W2O7-K2WO4-KPO3-Bi2O3 system and structure of K6.5Bi2.5W4P6O34

The phase relations in the cross-section of the K₂W₂O₇-K₂WO₄-KPO₃ containing 15 mol% Bi₂O₃ were undertaken using flux method. Crystallization fields of K_6.5Bi_2.5W₄P₆O₃₄, K₂Bi(PO₄)(WO₄), Bi₂WO₆, KBi(WO₄)₂ and their cocrystallization areas were identified. Novel phase K_6.5Bi_2.5W₄P₆O₃₄ was characterized by single-crystal X-ray diffraction: sp. gr. P−1, a=9.4170(5), b=9.7166(4), c=17.6050(7) Å, α=90.052(5)°, β=103.880(5)° and γ=90.125(5)°. It has a layered structure, which contains {K₇Bi₅W₈P₁₂O₆₈}_∞ layers stacked parallel to ab plane and sheets composed by potassium atoms separating these layers. Sandwich-like {K₇Bi₅W₈P₁₂O₆₈}_∞ layers are assembled from [W₂P₂O₁₃]_∞ and [BiPO₄]_∞ building units, and are penetrated by tunnels with K/Bi atoms inside. FTIR-spectra of K₂Bi(PO₄)(WO₄) and K_6.5Bi_2.5W₄P₆O₃₄ were discussed on the basis of factor group theory.     

KCl-KBO2-K2CO3, K2MoO4-KBO2-K2CO3, and K2WO4-KBO2-K2CO3 ternary systems

phase diagrams of KCl-KBO₂-K₂CO₃, K₂MoO₄-KBO₂-K₂CO₃, and K₂WO₄-KBO₂-K₂CO₃ ternary systems were studied by a calculation-experimental method and differential thermal analysis (DTA). The coordinates of ternary eutectics were determined to be E ₁: 622°C, 8.5 mol % KBO₂, 56.5 mol % KCl, and 35 mol % K₂CO₃; E ₂: 710°C, 23 mol % KBO₂, 43 mol % K₂CO₃, and 34 mol % K₂MoO₄; E ₃: 710°C, 23 mol % KBO₂, 43 mol % K₂CO₃, and 34 mol % K₂WO₄. The specific heats of melting of the eutectics were determined.     

Li2SO4-Na2SO4-H2O和Li2SO4- K2SO4-H2O溶液的体积性质

本文用高精度数字式振荡管密度计测定了288K至318K温度范围内Li₂SO₄ + Na₂SO₄ + H₂O和 Li₂SO₄ + K₂SO₄ + H₂O三元体系的密度。混合溶液的离子强度范围从0.1到4.5 mol.kg_–1,混合溶液中Na₂SO₄和K₂SO₄的离子强度分数为0.2,0.4,0.6和0.8。用密度实验值拟合得到了不同温度下Pitzer离子相互作用模型混合参数θ_V和 ψ_V,模型的计算值与实验值的偏差在±0.002 g.cm_–3以内。用Pitzer模型计算了不同离子强度下三元体系的混合体积。     

Extension of the La7Mo7O30 structural type with La7Nb3W4O30 and La7Ta3W4O30 compounds

Two compounds of formula La₇A₃W₄O₃₀ (with A=Nb and Ta) were prepared by solid-state reaction at 1450 and 1490 °C. They crystallize in the rhombohedric space group R-3 (No. 148), with the hexagonal parameters: , and , . The structure of the materials was analyzed from X-ray, neutron and electronic diffraction. These oxides are isostructural of the reduced molybdenum compound La₇Mo₇O₃₀, which are formed of perovskite rod along [111]. An order between (Nb, Ta) and W is observed.     

SnSbBiS4-SnS and SnSbBiS4-Sn2Sb6S11 sections of the SnS-Sb2S3-Bi2S3 ternary system

SnSbBiS₄-SnS and SnSbBiS₄-Sn₂Sb₆S₁₁ sections were studied by physicochemical methods (DTA, X-ray powder diffraction, microstructure observation, and microhardness measurements). These sections were found to be eutectic quasi-binary sections of the SnS-Sb₂S₃-Bi₂S₃ ternary system. Solid solution regions based on the initial components were found on either side of the sections. Alloys in the solid solution region are p-type semiconductors.     

Li2O-TiO2-SiO2-P2O5和Li2O-TiO2-Al2O3-P2O5体系锂离子固体电解质的制备及性能研究

一些具有NASICON型网格结构的固体电解质具有高的电导率和好的稳定性,NASICON的意思是Na Super Ionic Conductor[1]。当NaZr2(PO4)3中P5 被Si4 部分取代时便可以得到具有NASICON结构的Na1 xZr2SixP3-xO12体系,其具有高的钠离子电导率。然而有相同结构的Li1 xZr2SixP3-xO12体系的离子电导率却很低,这是因为Li 半径太小,而NASICON三维网格结构的离子通道太大,两者不匹配而使电导率下降[2]。但当LiZr2(PO4)3中Zr4 被离子半径小些的Ti4 取代,所得LiTi2(PO4)3的通道就与Li 半径相匹配,适合于锂离子的迁移,从而使其电导率…     

Structural chemistry of Sr3Cr2WO9, Ca3Cr2WO9, and Ba3Cr2WO9

We have studied the preparation and crystallographic structure of three perovskite-type compounds: Sr₃Cr₂WO₉, cubic, the lattice parameter of which is a = 7.812Å; Ca₃Cr₂WO₉, tetragonal, the lattice parameters of which are a = 5.408 Å and c = 7.635Å; and Ba₃Cr₂WO₉, hexagonal, the lattice parameters of which are a = 5.691 Å and c = 13.957Å. We have compared these three structures and shown the relationship between the dimensions of the alkaline-earth metal and the existence of the different structures.     

Solubility in the Na2Cr2O7-(NH4)2Cr2O7-K2Cr2O7-H2O system

Solubility in the Na₂Cr₂O₇-(NH₄)₂Cr₂O₇-K₂Cr₂O₇-H₂O four-component water-salt system at 25, 50, and 75°C was studied for the first time. Phase field boundaries for individual salts and potassium and ammonium dichromate solid solutions, monovariant lines, and invariant points were determined. Experimental data were used to optimize the looped isohydric process of potassium dichromate preparation involving additional salts.     

Preparation and structure of NaSr0.5Al2B2O7 and NaCa0.5Al2B2O7

Two compounds NaSr_0.5Al₂B₂O₇ and NaCa_0.5Al₂B₂O₇, have been found to crystallize into a new structure type by Rietveld refinement from X-ray powder diffraction data. Their structure belongs to hexagonal space group P6₃/m, with lattice parameters of , for NaSr_0.5Al₂B₂O₇ and , for NaCa_0.5Al₂B₂O₇, respectively. The structure is built up by [Al₂B₂O₇]²⁻ double layer and Na⁺/Ca²⁺ or Na⁺/Sr²⁺ ions alternatively stacking along the c-axis. The sites in the inter-double layer are fully occupied jointly by Na and Ca or Sr, but the intra-double layer sites are only half occupied solely by Na. A mechanism of the transition of the structure from CaAl₂B₂O₇ to present structure type by replacing only 1% Ca by Na (2%) as observed by Chang and Keszler (Mater. Res. Bull. 33 (1998) 299) is also proposed.