Ion chemistry of 1H-1,2,3-triazole

A combination of experimental methods, photoelectron-imaging spectroscopy, flowing afterglow-photoelectron spectroscopy and the flowing afterglow-selected ion flow tube technique, and electronic structure calculations at the B3LYP/6-311++G(d,p) level of density functional theory (DFT) have been employed to study the mechanism of the reaction of the hydroxide ion (HO-) with 1H-1,2,3-triazole. Four different product ion species have been identified experimentally, and the DFT calculations suggest that deprotonation by HO- at all sites of the triazole takes place to yield these products. Deprotonation of 1H-1,2,3-triazole at the N1-H site gives the major product ion, the 1,2,3-triazolide ion. The 335 nm photoelectron-imaging spectrum of the ion has been measured. The electron affinity (EA) of the 1,2,3-triazolyl radical has been determined to be 3.447 +/- 0.004 eV. This EA and the gas-phase acidity of 2H-1,2,3-triazole are combined in a negative ion thermochemical cycle to determine the N-H bond dissociation energy of 2H-1,2,3-triazole to be 112.2 +/- 0.6 kcal mol-1. The 363.8 nm photoelectron spectroscopic measurements have identified the other three product ions. Deprotonation of 1H-1,2,3-triazole at the C5 position initiates fragmentation of the ring structure to yield a minor product, the ketenimine anion. Another minor product, the iminodiazomethyl anion, is generated by deprotonation of 1H-1,2,3-triazole at the C4 position, followed by N1-N2 bond fission. Formation of the other minor product, the 2H-1,2,3-triazol-4-ide ion, can be rationalized by initial deprotonation of 1H-1,2,3-triazole at the N1-H site and subsequent proton exchanges within the ion-molecule complex. The EA of the 2H-1,2,3-triazol-4-yl radical is 1.865 +/- 0.004 eV.     

Metal salts of the 4,5-dicyano-2H-1,2,3-triazole anion ([C4N5]-)

Diaminomaleodinitrile was reacted at low temperatures with in situ generated nitrous acid to form 4,5-dicyano-2H-1,2,3-triazole (1) in yields above 90%. Crystalline 1 was then reacted with one equivalent of a suitable alkali or alkaline earth metal base (typically a hydroxide or a carbonate) in a polar solvent to form the corresponding alkali and alkaline earth metal salts of 4,5-dicyano-2H-1,2,3-triazole (compounds 2-9). The thermal stability of the metal salts 2-9 was assessed by differential scanning calorimetry, which showed excellent thermal stabilities up to above 350 °C. Due to the energetic character of triazole-based salts, initial safety testing was used to assess the sensitivity of compounds 2-9 towards impact, friction, electrostatic discharge and fast heating. These results revealed very low sensitivities towards all four stimuli. Additionally, compounds 2-9 were characterized by mass spectrometry, elemental analysis, infrared and Raman spectroscopy and ((1)H, (13)C and (14)N) NMR spectroscopy. We also determined the solid state structure of the 4,5-dicyano-2H-1,2,3-triazole anion of one of the alkali metal salts (4: Monoclinic, P2(1)/c, a = 9.389(1) ?, b = 10.603(1) ?, c = 6.924(1) ?, β = 102.75(1)° and V = 1036.58(3) ?(3)) and one of the alkaline earth metal salts (6: Monoclinic, P2(1)/c, a = 9.243(1) ?, b = 15.828(2) ?, c = 6.463(1) ?, β = 90.23(1)° and V = 945.5(2) ?(3)). Furthermore, we noted the hydrolysis of one of the cyano groups of the 4,5-dicyano-2H-1,2,3-triazole anion in the strontium salt 8 to form the 5-cyano-2H-1,2,3-triazole-4-carboxylic acid derivative 8b, as confirmed by X-ray studies (8b: Monoclinic, P2(1)/n, a = 6.950(1) ?, b = 17.769(1) ?, c = 13.858(1) ?, β = 92.98(1)° and V = 1709.1(1) ?(3)). Lastly, we computed the NBO and Mülliken charges for the anion of compounds 2-9 and those of the anion of compound 8b.     

Anhydrous proton conductivities of squaric acid derivatives

In this communication, we introduce squaric acid derivatives as anhydrous proton conductors. We report the synthesis, characterization and proton conductivities of four squaric acid derivatives. The anhydrous proton conductivity of one of the derivatives was 2.3 × 10(-3) S cm(-1) at 110 °C, comparable to the conductivity of molten 1H-1,2,3-triazole or 1H-imidazole.     

1H-1,2,4-Triazole as solvent for imidazolium methanesulfonate

The solvation effect of 1H-1,2,4-triazole towards imidazolium methanesulfonate was studied by blending imidazolium methanesulfonate and 1H-1,2,4-triazole. Upon addition of 1H-1,2,4-triazole, the melting point of imidazolium methanesulfonate was lowered to less than 100 °C while maintaining the high ionic conductivity for a wide composition range of the blend. The ionic conductivity of the blend can be adequately described by using the Vogel-Fulcher-Tamman equation. A vehicle mechanism is postulated to govern the proton conduction for the blend. The contribution of protons to the ionic conductivity was corroborated electrochemically. The blend exhibited electrochemical activities for H(2) oxidation and O(2) reduction at a Pt electrode, as well as a wide electrochemical window. Therefore, suitable blends can possibly serve as electrolytes for polymer electrolyte membrane fuel cells operating under non-humidifying conditions. The solvation effect studied herein suggests a promising approach to a wider application area of protic ionic liquids.     

Dimeric assemblies from 1,2,3-triazole-appended Zn(II) porphyrins with control of NH-tautomerism in 1,2,3-triazole

Cu(I)-catalyzed 1,3-dipolar cycloaddition of meso-ethynyl Zn(II) porphyrin with benzyl azide efficiently provides meso-1-benzyl-1H-1,2,3-triazolyl Zn(II) porphyrin, which assembles to form a slipped cofacial dimer by the complementary coordination of the triazole nitrogen atom at the 3-position to the zinc center of a second porphyrin moiety both in the solid and solution states. Removal of the benzyl protection and introduction of a 2-ethoxycarbonylphenyl moiety greatly stabilize the dimeric assembly through an additional hydrogen bonding interaction between the NH proton of 2H-1,2,3-triazole and the carbonyl oxygen.     

Design synthesis and biological evaluation of 3-substituted triazole derivatives

Based on the active site of lanosterol 14α-demethylase of azole antifungal agents,sixteen 1-(1H-1,2,4-triazole-1-yl)- 2-(2,4- difluorophenyl)-3-(N-n-butyl-N-1-substitutedbenzyl-4-methylene-1H-1,2,3-triazole)-2-propanols have been designed,synthesized and evaluated as antifungal agents.Results of preliminary antifungal tests against eight human pathogenic fungi in vitro showed that some of the compounds exhibited excellent activities with broad spectrum.     

Role of non-conventional hydrogen bonding in controlling regioselectivity for nucleophilic aromatic substitution of 4,6-dinitroisoindoline-1,3-dione with 1,2,3-triazole isomers: a computational studies

Structural Chemistry - The nucleophilic aromatic substitution reactions of 4,6-dinitroisoindoline-1,3-dione with 1,2,3-triazole isomers, i.e., 1H-1,2,3-triazole and 2H-1,2,3-triazole, have been...     

Palladium(II) complexes of readily functionalized bidentate 2-pyridyl-1,2,3-triazole "click" ligands: a synthetic, structural, spectroscopic, and computational study

The Cu(I)-catalyzed 1,3-cycloaddition of organic azides with terminal alkynes, the CuAAC "click" reaction is currently receiving considerable attention as a mild, modular method for the generation of functionalized ligand scaffolds. Herein we show that mild one-pot "click" methods can be used to readily and rapidly synthesize a family of functionalized bidentate 2-pyridyl-1,2,3-triazole ligands, containing electrochemically, photochemically, and biologically active functional groups in good to excellent yields (47-94%). The new ligands have been fully characterized by elemental analysis, HR-ESI-MS, IR, (1)H and (13)C NMR and in three cases by X-ray crystallography. Furthermore we have demonstrated that this family of functionalized "click" ligands readily form bis-bidentate Pd(II) complexes. Solution studies, X-ray crystallography, and density functional theory (DFT) calculations indicate that the Pd(II) complexes formed with the 2-(1-R-1H-1,2,3-triazol-4-yl)pyridine series of ligands are more stable than those formed with the [4-R-1H-1,2,3-triazol-1-yl)methyl]pyridine "click" ligands.     

含1,2,3-三氮唑结构的1,5-苯并硫氮杂[艹卓]的合成及其抑真菌活性

设计合成了三类含1,2,3-三氮唑结构的1,5-苯并硫氮杂[艹卓]化合物3-(1H-1,2,3-三氮唑)-4-芳基-2,5-二氢-1,5-苯并硫氮杂[艹卓](5a^5f)、3-(2H-1,2,3-三氮唑)-4-芳基-2,3-二氢-1,5-苯并硫氮杂[艹卓](6a^6f)和3-(1H-1,2,3-三氮唑)-4-芳基-2,3,4,5-四氢-1,5-苯并硫氮杂[艹卓](7a^7f).研究了中间体及目标产物的合成条件,分离出其中两个副产物并进行了结构确定.目标产物的抑真菌活性测试表明,化合物5a^5f对真菌具有良好的抑制作用,对新生隐球菌的抑制效果尤为突出.初步抑真菌构效关系研究表明, 1H-1,2,3-三氮唑环和C=C双键是化合物5a^5f抑真菌活性的关键官能团.     

Quantum chemical study of the tautomerism, geometry, and electronic structure of 1,2,3- and 1,2,4-triazoles

A systematic study was carried out on the tautomerism and geometry of 1,2,3- and 1,2,4-triazoles using the semiempirical AM1, PM3, MNDO, and MINDO/3 methods and nonempirical quantum chemical methods taking account of electronic correlation (MP2). The semiempirical methods were found to give incorrect results for the tautomerism of these triazoles, while the nonempirical methods correctly give the energy relationships and show enhanced stability for 2H-1,2,3- and 1H-1,2,4-triazoles attributed to the interaction of the unpaired electron pairs of the adjacent nitrogen atoms. Optimization of the geometry of 2H-1,2,3-triazole by the nonempirical methods showed that bases such as 6-21G and more expanded bases must be used and that electronic correlation should be taken into account. The use of updated calculation methods in the case of 1H-1,2,4-triazole did not give improved results.Prof. Asen Zlatarov University, 8010 Burgas, Bulgaria. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 5, pp. 645–651, May, 1998.     

Palladium(II) and platinum(II) complexes of bidentate 2-pyridyl-1,2,3-triazole “click” ligands: Synthesis,properties and X-ray structures

The synthesis and characterization of palladium(II) and platinum(II) complexes of isomeric bidentate 2-pyridyl-1,2,3-triazole “click” ligands is reported. The complexes have been fully characterized by elemental analysis, HRESI-MS, IR, UV–Vis, ¹H and ¹³C NMR spectroscopy. Additionally, the molecular structures of the Pd(II) and Pt(II) complexes of the 2-[(4-phenyl-1H-1,2,3-triazol-1-yl)methyl]pyridine ligand are confirmed by X-ray crystallography. Solution studies indicate the 2-(1-benzyl-1H-1,2,3-triazol-4-yl)pyridine ligand forms more stable complexes with Pd(II) and Pt(II) than the isomeric 2-[(4-phenyl-1H-1,2,3-triazol-1-yl)methyl]pyridine ligand.     

新型多氮化合物1,1＇-偶氮-1,2,3-三唑的合成与性能研究

以1-氨基-1,2,3-三唑（1）为原料,经二氯异氰尿酸钠（SDCI）氧化偶联合成了具有稳定N8结构（8个氮原子直接相连）和光致变色特性的新型多氮化合物1,1＇-偶氮-1,2,3-三唑（2）,通过IR,Raman,1H NMR,13C NMR,MS,元素分析等手段对其进行了表征;分离出了偶合反应副产物1H-1,2,3-...     

Trimethylsilyl-directed 1,3-dipolar cycloaddition reactions in the solid-phase synthesis of 1,2,3-triazoles

[reaction: see text] A regioselective method for the preparation of 1,5-trisubstituted 1H-1,2,3-triazoles via a 1,3-dipolar cycloaddition of 1-trimethylsilylacetylenes with organoazides is described. Immobilization of the azide on REM resin and subsequent cycloaddition afforded a 2 x 2 x 4 x 3 membered 1,5-disubstituted 1H-1,2,3-triazole library with an average purified yield of 68%.     

1,3-Dipolar cycloaddition of organic azides to alkynes by a dicopper-substituted silicotungstate

The dicopper-substituted gamma-Keggin silicotungstate TBA 4[gamma-H2SiW10O36Cu2(mu-1,1-N3)2] (I, TBA = tetra- n-butylammonium) could act as an efficient precatalyst for the regioselective 1,3-dipolar cycloaddition of organic azides to alkynes. Various combinations of substrates (four azides and eight alkynes) were efficiently converted to the corresponding 1,2,3-triazole derivatives in excellent yields without any additives. The present system was applicable to a larger-scale cycloaddition of benzyl azide to phenylacetylene under solvent-free conditions (100 mmol scale) in which 21.5 g of the analytically pure corresponding triazole could be isolated. In this case, the turnover frequency and the turnover number reached up to 14,800 h(-1) and 91,500, respectively, and these values were the highest among those reported for the copper-mediated systems so far. In addition, I could be applied to the one-pot synthesis of 1-benzyl-4-phenyl-1H-1,2,3-triazole from benzyl chloride, sodium azide, and phenylacetylene. The catalyst effect, kinetic, mechanistic, and computational studies show that the reduced dicopper core plays an important role in the present 1,3-dipolar cycloaddition.     

超声辐射下含1,2,3-三唑噻唑烷酮衍生物的合成

采用超声辐射法,以2-苯基-1,2,3-三唑-4-甲酰肼为原料,合成了3-(2-苯基-1,2,3-三唑-4-基)-5H-4-氧代噻唑[2,3-c].1,2,4-三唑,再与各种芳香醛进行Knoevenagel缩合反应,合成了一系列噻唑烷酮衍生物.所有目标化合物结构经元素分析,IR,1H NMR确证.     

Unprecedented (3,10)-connected 2-D metal-organic framework constructed from octanuclear cobalt(II) clusters and a new bifunctional ligand

A metal-organic framework with the highest connectivity of 2-D topology was first assembled from an octacobalt(II) cluster as a 10-connected node and a new bifunctional ligand 1-(3,5-dicarboxy-phenyl)-4-phenyl-1H-1,2,3-triazole as a 3-connected node as well as "double bridge" linkers.     

新型四阳离子型1,2,3-三唑鎓环蕃的合成

以间苯二酚为原料,经5步反应制得中间体4,4′-［4,6-双(己氧基)-1,3亚苯基］双{1-［4-(叠氮甲基)苯基］-1H-1,2,3-三氮唑}(6); 6与1,5-二乙炔基-1,4-二(己氧基)苯在高度稀释的条件下经Click反应环合制得1,2,3-三唑环蕃(7); 7与三甲基氧鎓四氟硼酸盐反应合成了全甲基化的新型1,2,3-三唑鎓环蕃,其结构经¹H NMR, ¹³C NMR和HR-ESI-MS表征。     

1-(4-取代苯基)-4-苯基-5-(2-羟基苄基)氨基-1,2,3-三唑类衍生物的合成及抑菌活性

将邻羟苯基引入1,2,3-三唑结构中, 设计合成了10个1-(4-取代苯基)-4-苯基-5-取代-1,2,3-三唑类衍生物. 首先, 以对位取代的芳胺为原料, 经重氮化、叠氮化、闭环和缩合反应制得1-(4-取代苯基)-4-苯基-5-水杨醛亚胺-1,2,3-三唑类衍生物(3a~3e), 再用硼氢化钠还原制得1-(4-取代苯基)-4-苯基-5-(2-羟基苄基)氨基-1,2,3-三唑类衍生物(4a~4e). 目标化合物的结构经核磁、IR及元素分析确认. 抑菌活性测试表明, 当质量浓度为0.1 mg/L时, 除化合物3e和4e外, 所有化合物对白色念球菌的抑菌率均达95%以上, 对大肠杆菌的抑菌率达85%以上, 具有强抑菌活性, 表明该类化合物在抗菌药物开发方面有重要应用价值.     

Synthesis of 1,2,3-triazole nucleosides via the acid-catalyzed fusion procedure

The acid-catalyzed fusion of methyl 1,2,3-triazole-4-carboxylate, 4-cyano-1,2,3-triazole, and 4-nitro-1,2,3-triazole with an acylated ribofuranose provided the corresponding 2-β-D-ribo-furanosyl-4-substituted-1,2,3-triazoles along with the isomeric 1-β-D-ribofuranosyl-4-substituted-1,2,3-triazoles. The structures of these nucleosides were assigned on the basis of their nmr spectra. The synthesis of 2-β-D-ribofuranosyl-1,2,3-triazole-4-carboxamide from both the corresponding methyl ester and cyano nucleosides is described. The cyano nucleosides were utilized to prepare 2-β-D-ribofuranosyl-1,2,3-triazole-4-thiocarboxa?ide and 1-β-D-ribofuranosyl-1,2,3-triazole-4-thiocarboxamide. Reduction of the 4-nitro-1,2,3-triazole nucleosides provided 4-amino-2-β-D-ribofuranosyl-1,2,3-triazole and the isomeric 4-amino-1-β-D-ribofuranosyl-1,2,3-triazole. The acid-catalyzed fusion procedure with 1,2,3-triazole afforded 1-β-D-ribofuranosyl-1,2,3-triazole and 2-β-D-ribofuranosyl-1,2,3-triazole.     

Trifluoromethyl Sulfones and Perfluoroalkanesulfonamides of the Azole Series

2-Phenyl-4-trifluoromethylsulfonylmethyl-2H-1,2,3-triazole was synthesized from 4-bromo-methyl-2-phenyl-2H-1,2,3-triazole and sodium trifluoromethanesulfinate CF₃SO₂Na. 1(2)-Ethyl-4-nitro-1(2)H-1,2,3-triazoles and 4-nitro-2-phenyl-2H-1,2,3-triazole were reduced to the corresponding amines. Intermediate 1,2-bis(1-ethyl-1H-1,2,3-triazol-4-yl)diazene 1-oxide exists as a mixture of syn and anti isomers, the former being stabilized via formation of a strong intramolecular hydrogen bond. The reduction of 2-ethyl-4-nitro-2H-1,2,3-triazole in the presence of HCl afforded the target 4-amino-2-ethyl-2H-1,2,3-triazole and also 4-amino-5-chloro-2-ethyl-2H-1,2,3-triazole. Treatment of alkyl-substituted 4-amino-1,2,3-triazoles with trifluoromethanesulfonyl chloride and pentafluoroethanesulfonyl chloride gave N-triazolyl-substituted trifluoromethane- and pentafluoroethanesulfonamides and -imides.