Thermal analysis of carbon anti-burn-on disperse systems used in foundries

Anti-burn-on disperse systems for foundry use, containing carbon (graphite or anthracite after different pretreatments, or mixtures thereof) in carboxymethylcellulose-water, were studied by TG-DTA. Thermal effects are attributed to the evaporation of water, the evolution of other volatiles and the beginning of ignition. TG is useful for determination of the water content.

---

Zusammenfassung Oxidationshemmende Dispersionen für die Giesserei, die aus Kohle (Graphit, Anthrazit verschiedener Vorbehandlung bzw. Gemische daraus), Carboxymethylcellulose und Wasser bestehen, wurden durch TG-DTA untersucht. Die thermischen Effekte werden der Verdampfung von Wasser, dem Entweichen anderer flüchtiger Produkte und der beginnenden Verbrennung zugeordnet. Der Wassergehalt kann mittels TG bestimmt werden.

---

(, ), , - — . , . .

     

On theC v toC p conversion for solid linear macromolecules

TheC _v toC _p conversion for solid linear macromolecules via the Nernst-Lindemann equationC _p -C _v =A ₀,C _p ² T/T_m is discussed on hand of data for 10 crystals and seven glasses. An average value ofA ₀=(5.11±2.41) · 10^–3 mol K J^–1 was calculated if the mole is assumed to refer to heavy atoms only. ThisA ₀ is numerically equal to the original Nernst—Lindemann constant.

---

Zusammenfassung An Hand von sich auf 10 Kristalle und 7 Gläser beziehenden Daten wird die Umrechnung vonC _v -inC _p -Werte für feste lineare Makromoleküle mittels der Nernst-Lindemann-GleichungC _p -C _v =A ₀ C _p ² T/T _m diskutiert. Ein Durchschnittswert vonA ₀=(5.11±2.41) · 10^–3 mol K J^–1 wurde unter der Annahme berechnet, daß sich das Mol nur auf schwere Atome bezieht. DieserA ₀-Wert ist numerisch gleich der ursprünglichen Nerns-Lindemann-Konstanten.

---

10 , - C _v C _p , —C _p –C _v = _{0 p} ² / . , , ₀ (5.11±2.41) · 10^–3 · ^–1. ₀ — .

---

---

Support by the National Science Foundation, Polymers Program (Grant No. DMR 83-17097) is gratefully acknowledged.     

Interaction of styrene with triphenylphosphinecobalt complexes

The interaction of the cobalt phosphine complexes Co(N₂)(PPh₃)₃, HCo(N₂)(PPh₃)₃ and H₃Co(PPh₃)₃ with styrene yields mono and dinuclear complexes identified by the ESR method. A paramagnetic complex, Co(PPh₃) (styrene)₂, is one of the intermediates in the catalytic hydrogenation of styrene.

---

Co(N₂)(PPh₃)₃, HCo(N₂)(PPh₃)₃ H₃Co(PPh₃)₃ . , Co(PPh₃) ()₂.

     

Propos sur l'interpretation de l'energie d'activation experimentale

Résumé Les résultats de divers travaux montrent que la valeurE _e de l'énergie activation expérimentale tirée des diagrammes d'Arrhénius varie avec la pression, dans le cas de réactions de décompositions endothermiques.L'analyse de divers modèles permet d'expliquer cette constatation en montrant que la grandeurE _e n'a pas le sens d'une énergie d'activation mais est une fonction de nombreux paramètres. Deux d'entre eux ont été retenus dans le cadre de cette étude: le terme d'écart à l'équilibre et le terme de gradient thermique, provoqué par l'endothermicité du phénomène.Cette analyse permet d'établir une prévision de la fonctionE _e (P) conforme aux résultats expérimentaux.

---

The results from various investigations show that the experimental activation energy valueE _e derived from the Arrhenius diagrams varies with pressure for endothermic decomposition reactions.The analysis of various models allows this fact to be accounted for by showing thatE _e should be regarded not in its fundamental formulation, but as being a function of numerous parameters. Two of these were taken into account in the present study, i.e. deviation from equilibrium and a thermal gradient due to the fact that the phenomenon is endothermic.FunctionE _e (P) fitting the experimental results may be predicted by such an analysis.

---

Zusammenfassung Die Ergebnisse verschiedener Untersuchungen zeigen, dass die aus den Arrhenius-Diagrammen abgeleiteten experimentellen Werte der AktivierungsenergieE _e bei endothermen Zersetzungsreaktionen mit dem Druck variieren.Die Analyse verschiedener Modelle ermöglicht eine Erklärung dieser Tatsache, indem gezeigt wird, dassE _e nicht in ihrer grundliegenden Formulierung betrachtet werden darf, sondern als Funktion einer Anzahl von Parametern. Zwei dieser Parameter wurden in der vorliegenden Untersuchung berücksichtigt d.h. die Abweichung von dem Gleichgewicht und der thermische Gradient, welcher infolge der endothermen Beschaffenheit der Erscheinung auftritt.Eine den Versuchsergebnissen entsprechende FunktionE _e (P) kann mittels einer solchen Analyse vorausgesagt werden.

---

, _e, , . , _ee , . , : , , . _e (), , .

     

Physicochemical properties and hds activity of CoMo?P?Al2O3 catalysts

Porous structure, acidity and hds activity of the CoMo–P–Al₂O₃ catalysts have been studied. Phosphorus was introduced jointly with molybdenum. This method of phosphorus incorporation gave substantial diminution of surface area, moderate changes of acidity and decrease in hds activity for the catalysts with P₂O₅ content higher than 5 wt.%.

---

, CoMo–P–Al₂O₃. . , P₂O₅ 5 .%.

     

Phasenumwandlungen im system Cu x II Mn 1−x II Fe 2 III (OH)8

Zusammenfassung Die gemeinsam gefällten, ursprünglich amorphen Cu(II)Mn(II)Fe(III) Hydroxide gehen im Verlauf der Alterung durch Kochen in kristalline Phasen über, von denen wenigstens eine den Alterungsprodukten ferromagnetische Eigenschaften verleiht. Da es nicht möglich ist direkt zu entscheiden ob-Fe₂O₃ oder entsprechende Ferrite diese Eigenschaft hervorrufen, ist es notwendig, sich für die Identifizierung der Alterungsprodukte die thermische Instabilität von-Fe₂O₃ nutzbar zu machen. Die an Mn(II) sehr reichen Präparate zeigen einen Temperaturinvervall, in welchem sie überhaupt keine ferromagnetischen Eigenschaften aufweisen. Es ist dies ein Beweis dafür, daß der primär während des Kochens erworbene Ferromagnetismus ausschließlich von-Fe₂O₃ herrührt. Der bei hohen Temperaturen erneut auftretende Ferromagnetismus ist eine Eigenschaft der infolge thermischer Bearbeitung entstehenden Ferrite.

---

After being boiled in water, the originally amorphous mixture of coprecipitated Cu(II), Mn(II) and Fe(III) hydroxides is transformed into crystalline phases, at least one of them being ferromagnetic. Since it can not be ascertained directly whether this property is due to the presence of-Fe₂O₃ or/and a corresponding ferrite, the identification must be based on the thermally metastable nature of-Fe₂O₃.The species with high Mn(II) contents exhibit temperature ranges in which the ferromagnetic properties disappear completely. This is the proof that the primarily acquired ferromagnetism stems exclusively from a ferromagnetic modification of iron oxide, namely-Fe₂O₃.As a result of thermal treatment at higher temperatures, the ferromagnetism reappears, this time due to the formation of ferrites.

---

Résumé Les mélanges initialement amorphes des hydroxydes coprécipités de Cu(II), Mn(II) et Fe(III), se transforment, après chauffage dans de l'eau bouillante, en phase cristallines, dont l'une au moins est ferromagnétique. Comme il n'est pas possible de s'assurer directement que cette propriété est conditionnée par la présence de-Fe₂O₃ et/ou du ferrite respectif, l'identification doit reposer sur la nature thermiquement métastable de-Fe₂O₃.Dans le cas des préparations à teneur élevée en manganèse il existe un intervalle de températures où les propriétés ferromagnétiques disparaissent complêtement. C'est la preuve de ce que le ferromagnétisme acquis primitivement provient exclusivement d'une modification ferromagnétique ou d'un oxyde, notamment-Fe₂O₃.Le traitement thermique à des températures plus élevées a pour résultat la réapparition du ferromagnétisme, cette fois dû à la formation de ferrites.

---

Cu(II), Mn(II) Fe(III) , , , . , —Fe₂O₃ , , —Fe₂O₃. Mn(II) , . , , —Fe₂O₃. , , .

     

Methane synthesis from CO/H2O mixture on supported nickel catalysts, II. Surface species in CO?H2 and CO?D2O interaction by IR spectroscopy

The species resulting in CO, CO+H₂ or CO+D₂O adsorption on supported Ni catalysts were followed by IR spectroscopy and their role in methane synthesis mechanism is discussed.

---

- , CO, CO+H₂ CO+D₂O . .

     

Effect of P2O5 content in phosphogypsum on its thermal decomposition to CaCO and SO2

The effect of P₂O₅ on the thermal decomposition of phosphogypsum to phospholime and sulphur dioxide has been studied.

---

Zusammenfassung Es wurde der Einfluß von P₂O₅ auf die thermische Zersetzung von Phosphogips zu Phospholim und Schwefeldioxid untersucht.

---

.

     

X-ray spectral investigation by synchrotron radiation of supported Re/SiO2 and (Re+Pt)/SiO2 catalysts prepared via triethoxyrhenium

Using synchrotron radiation L_III absorption spectra of rhenium in Re/SiO₂ and (Re+Pt)/SiO₂ catalysts prepared via triethoxyrhenium have been studied. The conclusion has been drawn that reduced catalysts contain lowvalent rhenium ions and their composition is more uniform than that of the previously examined catalysts Re/Al₂O₃ and (Re+Pt)/Al₂O₃ prepared by a conventional impregnation technique.

---

L_III- Re/SiO₂ (Re+Pt)/SiO₂, . , , Re/Al₂O₃ (Re+Pt)/Al₂O₃, .

     

Bauxites as hydrotreatment catalysts

The effects of calcination temperature on structural and textural characteristics of two Greek bauxites were examined by different physicochemical techniques. Although the above minerals exhibited lower activity than a commercial CoMo/Al₂O₃ catalyst, they were evaluated as possible hydrotreating catalysts.

---

. , CoMo/Al₂O₃, , .

     

M?ssbauer spectroscopic studies of passivated layers of iron-containing catalysts for ammonia synthesis

Combined conversion electron (CEMS) and transmission -ray (MS) Mössbauer spectroscopy was used to study the structure of passivated layers of promoted and unpromoted iron-containing catalysts. In both catalysts the oxide-coated films were found to consist of small paramagnetic (at 300 K) clusters of ferric oxide.

---

. , ( 300 ) .

     

Differential thermal analysis studies on the crystallization of strontium tungstate from sodium tungstate melt. Nucleation mechanism and induction periods

The nucleation mechanism, kinetics and induction periods in strontium tungstate crystallization from sodium tungstate melt in platinum crucibles were investigated by differential thermal analysis. Heterogeneous nuclei first formed on the metal platinate particles within the solution during the induction periods (¯t); the main crystal growth started only after ¯t and few new nuclei were then formed. At any crystallization temperature, ¯t varied inversely with the cooling rate (R _T), and with the rate (R_C) of development of excess solute concentration according to the relation ¯t = 1/(k ₁ R _c ), wherek ₁ and are constants. The critical temperature (¯T), critical supersaturation(¯ S), k ₁ and were evaluated.

---

Zusammenfassung Der Keimbildungsmechanismus, sowie die Kinetik und die Induktionsperioden wurden bei der Kristallisation von Strontiumwolframat aus Natriumwolframatschmelzen in Platintiegeln durch Differentialthermoanalyse untersucht. Die heterogenen Kristallkeime wurden zuerst während der Induktionsperiode () an den Metallplatinat-Teilchen in der Lösung gebildet: das Hauptkristallwachstum begann erst nach und nachfolgend wurden einige neue Keime gebildet. Bei jeder Kristallisationstemperatur änderte sich umgekehrt proportional zu den Abkühlungsgeschwindigkeiten (R _T) und den Geschwindigkeiten (R _c) der Bildung überschüssig gelösten Materials, entsprechend der Gleichung = 1/(k ₁ R _c , wobeik ₁ und Konstanten sind. Die kritische Temperatur (¯T), die kritische Übersättigung (¯S),k ₁ und wurden bewertet.

---

Résumé On a étudié par analyse thermique différentielle le mécanisme de nucléation ainsi que la cinétique et les périodes d'induction de la cristallisation du tungstate de strontium, à partir des bains fondus de tungstate de sodium, dans des creusets de platine. Des noyaux hétérogènes se forment d'abord sur les particules de platinate métallique dans la solution, au cours des périodes d'induction (): la croissance principale des cristaux ne commence qu'après et il se forme alors quelques noyaux nouveaux. A une température quelconque de cristallisation, varie de façon inverse avec les vitesses de refroidissement (R _T) et les vitesses de développement (R _c ) de concentrations de sursaturation de la substance en solution, selon la relation = 1/(k ₁ R _c , oùk ₁ et sont des constantes. On a évalué la température critique (¯T), la sursaturation critiques (¯S),k ₁ et.

---

, . - (¯ t). ¯t . - ,¯t (R _T), (R _c) ¯t=1/(K₁ R _c ), ₁ — . (¯), (_-S), K₁ .

     

Kinetics and mechanism of nucleophilic substitution of dichloro{1-methyl-2-(arylazo)imidazole}palladium(II) by pyridine bases

The reaction of dichloro{1-methyl-2-(arylazo)imidazole}palladium(II), Pd(RaaiMe)Cl₂ where RaaiMe = p-R–C₆H₄N=N–C₃H₂N₂-1-Me; R = H(1), Me(2), Cl(3), with pyridine bases [RPY: R = H (a), 4-Me (b), 4-Cl (c), 2-Me (d), 2,6-Me₂ (e), 2,4,6-Me₃ (f)] has been studied spectrophotometrically in MeCN at 451 nm. The products (4) have been isolated and characterised as trans-Pd(RPy)₂Cl₂. The kinetics of the nucleophilic substitution has been examined under pseudo-first-order conditions at 298 K. A single phase reaction step has been observed for bases such as Hpy (a), 4-MePy (b) and 4-ClPy (c) and follows the rate law: rate = (a + k[RPy]²[Pd(RaaiMe)Cl₂]). The bases 2-MePy (d), 2,6-Me₂Py (e) and 2,4,6-Me₃Py (f) exhibits a bi-phasic reaction and follows the rate laws: rate–1 = (a + k[RPy][Pd(RaaiMe)Cl₂]) and rate–2 = (a + k[RPy][Pd(RaaiMe)-Cl₂]), where k is the third-order rate constant; k is the second-order first phase rate constant, k is the second-order second phase rate constant and a/a/a correspond to the solvent dependent constant of the respective reaction path. The rate data supports a nucleophilic association path. External addition of Cl^– (LiCl) suppresses the rate, which follows the order: k/k/k (3) > k/k,k (1) > k/k,k (2). The k values are linearly related to the Hammett constants. The 2-substituted pyridines (d–f) remarkably reduce the rate and show a bi-phasic reaction behaviour as compared with 4-Rpy (a–c). This is attributed to the steric effect that destabilises the transition state. The rate decreases with increasing steric crowding at the ortho-position and follows the order: (d) > (f) > (e). The 4-substituted pyridines control the rate via an inductive effect and follow the order: (b) > (a) > (c).     

Isomerization of unsaturated compounds on Pd/Al2O3 in the presence of additives

Studies of the effect of zinc chloride and aluminium additives on the activity of a Pd/Al₂O₃ catalyst (5 wt.%Pd) in the isomerization of heptene-1, allylbenzene,p-allylphenol and 4-allyl-2-methoxyphenol (eugenol) indicate that the rate and selectivity of isomerization depend on the sequence of addition of salts and reagent to the catalytic system. The simultaneous addition of ZnCl₂ or AlCl₃ with olefin, produces a 2–3 fold increase in the isomer yield compared to ethanol.

---

Pd/Al₂O₃- (5 .% Pd) -1, , -, 4--2- (). , . ZnCl₂ AlCl₃ 2–3 .

     

Reactivity of coordinated O2? towards. One-electron oxidants

Ion-radical complexes Ti(IV) (O ₂ ^– ) are unreactive towards most oxidants except Ce(IV) and Cr₂O ₇ ^2– . The one-electron redox potential for the O_{2 coord.}/O _{2 coord.} ^– couple lies between 1 and 1.6 V.

---

- O ₂ ^– Ti(IV) , Ce(IV) Cr₂ O ₇ ^2– . - O_{2 .}/O ₂ ^– . 1 1,6 .

     

Spin conversion of positronium in paramagnetic solutions studied by age-momentum-correlation method

Correlated measurement of the lifetime and of the lineshape of the 511 keV annihilation radiation of positrons (age-momentum correlation, AMOC) has become a powerful tool for investigating reactions of positron or positronium in condensed matter as a function of time. The beam-based ⁺ AMOC method installed at the Stuttgart relativistic positron beam facility (E _kin ^e+ 4MeV) offers substantial advantages over the conventional E coincidence technique resulting in a fast data taking due to the unity detection efficiency of the ⁺ scintillator which provides the start signal for the lifetime measurement. In this paper the application of AMOC to positronium chemistry is illustrated by the study of spin conversion of positronium in the system methanol/HTEMPO as a function of HTEMPO (4-hydroxy-2,2,6,6-tetramethylpiperidine-1-oxyl, a paramagnetic solute) concentration. The same technique can be applied to other systems and other reactions in positronium chemistry, e. g., oxidation or complex formation.     

Effect of Rh/Al2O3 on the reduction of ZnO in a mechanical mixture of these components

The effect of reoxidation temperature on TPR of 5% Rh/Al₂O₃ catalyst and its mechanical mixture with ZnO has been investigated. The results suggest bimodal character of supported rhodium and surprisingly high effect of this metal on ZnO reduction in the mixture.

---

5% Rh/Al₂O₃ ZnO. , ZnO .

     

Extraction of Polonium from Aqueous α-Hydroxyisobutyric Acid Solutions Using Dioctyl Sulphide, Cyanex 272, Cyanex 301 or Cyanex 302 in Toluene

A study of the extraction of polonium from aqueous solutions containing -hydroxyisobutyric acid (-HIBA) was performed with four different extractants, di-n-octyl sulphide (DOS), Cyanex 272, Cyanex 301 and Cyanex 302, dissolved in toluene. The extracted complex for DOS at low -HIBA concentrations is most likely PoO(-HIB)₂·2DOS, while at higher -HIBA concentrations there seems to be a solvating effect implicating an extracted complex of the type PoO(-HIB)₂(-HIBA)₂·2DOS. For the extraction of polonium with Cyanex 272 the results are inconclusive. The extracted complex is either PoOA₂ or PoO(-HIB)₂·2HA. For extraction with Cyanex 301 or Cyanex 302 the major extracted species does not contain any -HIBA molecules. The neutral species in both cases is PoOA₂, extracted at low extractant concentrations, while at higher extractant concentrations a complex of the type PoOA₂·xHA is extracted. The extraction of polonium increases in the order Cyanex 272 < DOS < Cyanex 302 < Cyanex 301.     

Rh and Pt catalysts activated by UHV treatments

The H₂–D₂ exchange activity of Rh powder was enhanced by high-temperature UHV treatment accompanied with an enrichment of the high-index faces of Rh. The thermal decomposition of H₂PtCl₆·6H₂O under UHV condition resulted in an extremely active Pt powder catalyst.

---

H₂–D₂ Rh , - Rh - . H₂PtCl₆·6H₂O Pt .