Regioregular pyridal[2,1,3]thiadiazole π-conjugated copolymers

π-Conjugated, narrow band gap copolymers containing pyridal[2,1,3]thiadiazole (PT) were synthesized via starting materials that prevent random incorporation of the PT heterocycles relative to the backbone vector. Two regioregular structures could be obtained: in one the PTs are oriented in the same direction, and in the other the orientation of the PTs alternates every other repeat unit. Compared to their regiorandom counterparts, the regioregular polymers exhibit a 2 orders of magnitude increase of the hole mobilites, from 0.005 to 0.6 cm(2) V(-1) s(-1), as determined by field-effect transistor measurements.     

Effects of substituted side‐chain position on donor–acceptor conjugated copolymers

The optical properties and electrical properties of a series of low‐band‐gap conjugated copolymers, in which alkyl side chains were substituted at various positions, were investigated using donor–acceptor conjugated copolymers consisting of a cyclopentadithiophene derivative and dithienyl‐benzothiadiazole. With substituted side chains, the intrinsic properties of the copolymers were significantly altered by perturbations of the intramolecular charge transfer. The absorption of poly[2, 6‐(4,4‐bis(2‐octyl)‐4H‐cyclopenta‐[2,1‐b:3,4‐b′]dithiophene)‐alt‐4, 7‐bis(4‐octyl‐thiophene‐2‐yl)benzo‐2,1,3‐thiadiazole] [ PCPDT‐ttOTBTOT ( P2 )], which assumed a tail–tail configuration, tended to blue shift relative to the absorption of poly[2,6‐(4,4‐bis(2‐octyl)‐4H‐cyclopenta‐[2,1‐b:3,4‐b′]dithiophene)‐alt‐4,7‐bis (thiophene‐2‐yl)benzo‐2,1,3‐thiadiazole] [ PCPDT‐TBTT ( P1 )]. The absorption of poly[2,6‐(4,4‐bis(2‐octyl)‐4H‐cyclopenta‐[2,1‐b:3, 4‐b′]dithiophene)‐alt‐4,7‐bis(3‐octyl‐thiophene‐2‐yl)benzo‐2,1,3‐thiadiazole] [ PCPDT‐hhOTBTOT ( P3 )], which assumed a head–head configuration, was blue shifted relative to that of P2 . The electrical transport properties of field‐effect transistors were sensitive to the side chain position. The field‐effect mobility in P2 (μ₂ = 1.8 × 10^?3 cm²/V s) was slightly lower than that in P1 (μ₁ = 4.9 × 10^?3 cm²/V s). However, the mobility of P3 was very low (μ₃ = 3.8 × 10^?6 cm²/V s). Photoexcitation spectroscopy showed that the charge generation efficiency (shown in transient absorption spectra) and polaron pair mobility in P1 and P2 were higher than in P3 , yielding P1 and P2 device performances that were better than the performance of devices based on P3 . © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Investigation of 2, 1, 3-thia- and 2, 1, 3 selenadiazoles

The nitration of naphtho[1,2-d][2,1,3]thiadiazole under the conditions that are normally used for aromatic compounds gives a mixture of 6- and 9-nitronaphthothiadiazoles, which can be reduced to 6- and 9-amino derivatives, respectively. 6-Hydroxynaphthothiadiazole is obtained from 6-aminonaphthothiadiazole by the Sandmeyer reaction, while 8-hydroxynaphthothiadiazole is converted to the 8-amino derivative under the conditions of the Bucherer reaction. 4-Carboxy-5-(o-carboxyphenyl)-2,1,3-thiadiazole was obtained by the oxidation of naphtho[1,2-d][2,1,3]-thiadiazole with a potassium dichromate-dilute sulfuric acid mixture.See [1] for communication LXVI.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 11, pp. 1496–1502, November, 1972.     

General synthesis of dinaphtho[2,3-b:2',3'-f]thieno[3,2-b]thiophene (DNTT) derivatives

A new straightforward synthesis of dinaphtho[2,3-b:2',3'-f]thieno[3,2-b]thiophene (DNTT) derivatives from readily available 2-methoxynaphthalenes is described. Thus, newly developed derivatives of DNTT showed very high field effect mobility in the vapor-processed field-effect transistors up to 8 cm(2) V(-1) s(-1).     

Lewis acid adducts of narrow band gap conjugated polymers

We report on the interaction of Lewis acids with narrow band gap conjugated copolymers containing donor and acceptor units. Examination of the widely used poly[(4,4-bis(2-ethylhexyl)cyclopenta-[2,1-b:3,4-b']dithiophene)-2,6-(diyl-alt-benzo[2,1,3]thiadiazole)-4,7-diyl] (1) shows weaker binding with B(C(6)F(5))(3) when compared with a small molecule that contains a cyclopenta-[2,1-b:3,4-b']dithiophene (CDT) unit flanked by two benzo[2,1,3]thiadiazole (BT) fragments. Studies on model compounds representative of 1, together with a comparison between B(C(6)F(5))(3) and BBr(3), indicate that the propensity for Lewis acid coordination is decreased because of steric encumbrance surrounding the BT nitrogen sites. These observations led to the design of chromophores that incorporate an acceptor unit with a more basic nitrogen site, namely pyridal[2,1,3]thiadiazole (PT). That this strategy leads to a stronger B-N interaction was demonstrated through the examination of the reaction of B(C(6)F(5))(3) with two small molecules bis(4,4-bis(hexyl)-4H-cyclopenta[2,1-b;3,4-b']dithiophene)-4,7-pyridal[2,1,3]thiadiazole (8) and bis{2-thienyl-(4,4-bis(hexyl)-4H-cyclopenta[2,1-b;3,4-b']dithiophene)}-4,7-pyridal[2,1,3]thiadiazole (9) and two polymer systems (poly[(4,4-bis(2-ethylhexyl)cyclopenta-[2,1-b:3,4-b']dithiophene)-2,6-diyl-alt-([1,2,5]thiadiazolo[3,4-c]pyridine)-4,7-diyl] (10) and poly[(4,4-bis(2-ethylhexyl)cyclopenta-[2,1-b:3,4-b']dithiophene)-2,6-diyl-alt-(4',7'-bis(2-thienyl)-[1,2,5]thiadiazolo[3,4-c]pyridine)-5,5-diyl] (11). From a materials perspective, it is worth pointing out that through the binding of B(C(6)F(5))(3), new NIR-absorbing polymers can be generated with band gaps from 1.31 to 0.89 eV. A combination of studies involving ultraviolet photoemission spectroscopy and density functional theory shows that the narrowing of the band gap upon borane coordination to the pyridal nitrogen on PT is a result of lowering the energies of both the highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) of the optically relevant fragments; however, the LUMO is decreased to a greater extent, thereby giving rise to the narrowing of the gap.     

Synthesis and characterization of [1,2,5]chalcogenazolo[3,4-f]benzo[1,2,3]triazole and [1,2,3]triazolo[3,4-g]quinoxaline derivatives

The synthesis and characterization is reported of low bandgap [1,2,5]chalcogenazolo[3,4-f]benzo[1,2,3]triazole and [1,2,3]triazolo[3,4-g]quinoxaline derivatives that display higher solubility and stability then their thiadiazole counterparts, [1,2,5]chalcogenazolo[3,4-f]benzo[2,1,3]thiadiazole and [1,2,5]thiadiazolo[3,4-g]quinoxaline, respectively.     

Synthesis and photovoltaic properties of novel C60 bisadducts based on benzo[2,1,3]-thiadiazole

A novel C₆₀ solar cell acceptor (BTOQC, benzo[2,1,3]-thiadiazole-o-quinodimethane-C₆₀ bisadducts) based on benzo[2,1,3]thiadiazole has been synthesized as model to study how the thiadiazole group will affect the device performance in bulk heterojunction organic photovoltaics (BHJ-OPV) with poly(3-hexylthiophene) (P3HT) as donor. The optoelectronic, electrochemistry, and photovoltaic properties of the novel bisadduct BTOQC have been fully investigated. The best device performance of this fullerene derivative in our research was obtained as 2.50% with a high V_oc of 0.74 V.     

Oxygen bridged neutral annulenes: a novel class of materials for organic field-effect transistors

New, neutral, meso-substituted tetraoxa[22]annulene[2,1,2,1] aromatic macrocycles are synthesised and disclosed as new p-type semiconductors with reproducible bulk-like carrier mobility (as high as 0.40 cm(2) V(-1) s(-1)) on highly crystalline thin films deposited on octadecyltrichlorosilane modified SiO(2).     

Linear- and angular-shaped naphthodithiophenes: selective synthesis, properties, and application to organic field-effect transistors

A straightforward synthetic approach that exploits linear- and angular-shaped naphthodithiophenes (NDTs) being potential as new core structures for organic semiconductors is described. The newly established synthetic procedure involves two important steps; one is the chemoselective Sonogashira coupling reaction on the trifluoromethanesulfonyloxy site over the bromine site enabling selective formation of o-bromoethynylbenzene substructures on the naphthalene core, and the other is a facile ring closing reaction of fused-thiophene rings from the o-bromoethynylbenzene substructures. As a result, three isomeric NDTs, naphtho[2,3-b:6,7-b']dithiophene, naphtho[2,3-b:7,6-b']dithiophenes, and naphtho[2,1-b:6,5-b']dithiophene, are selectively synthesized. Electrochemical and optical measurements of the parent NDTs indicated that the shape of the molecules plays an important role in determining the electronic structure of the compounds; the linear-shaped NDTs formally isoelectronic with naphthacene have lower oxidation potentials and more red-shifted absorption bands than those of the angular-shaped NDTs isoelectronic with chrysene. On the contrary, the performance of the thin-film-based field-effect transistors (FETs) using the dioctyl or diphenyl derivatives were much influenced by the symmetry of the molecules; centrosymmetric derivatives tend to give higher mobility (up to 1.5 cm(2) V(-1) s(-1)) than axisymmetric ones (～0.06 cm(2) V(-1) s(-1)), implying that the intermolecular orbital overlap in the solid state is influenced by the symmetry of the molecules. These results indicate that the present NDT cores, in particular the linear-shaped, centrosymmetric naphtho[2,3-b:6,7-b']dithiophene, are promising building blocks for the development of organic semiconducting materials.     

Thin film organic transistors from air-stable heteroarenes: anthra[1,2-b:4,3-b':5,6-b':8,7-b']tetrathiophene derivatives

A facile synthesis of air-stable anthra[1,2-b:4,3-b':5,6-b':8,7-b']tetrathiophene derivatives 1a and 1b has been developed for applications in organic thin film transistors. Both molecules tend to self-associate through pi-pi stacking in solution and in different films. The hole mobility of 0.012 cm2 V(-1) s(-1) is obtained from 1a due to morphology changes in films from less ordered to highly ordered structures after thermal annealing. Good performance remained persistent over a period of 14 days, indicating the high stability of such transistors.     

Benzo[1,2-b:4,5-b']bis[b]benzothiophene as solution processible organic semiconductor for field-effect transistors

Coplanar benzo[1,2-b:4,5-b']bis[b]benzothiophenes (, ) for the application in organic field-effect transistors were synthesized by a simple two-step procedure involving triflic acid induced ring-closure reaction; such solution processed devices show a hole mobility of up to 0.01 cm(2) V(-1) s(-1).     

Electronic structures and charge transport properties of the organic semiconductor bis[1,2,5]thiadiazolo-p-quinobis(1,3-dithiole), BTQBT, and its derivatives

We analyze the correlation between crystal and film structures and charge transport of an important organic semiconductor, bis[1,2,5]thiadiazolo-p-quinobis(1,3-dithiole) (BTQBT), and its derivatives 4,8-bis(1,3-dithiol-2-ylidene)-4H,8H-[1,2, 5]selenadiazolo[3,4-f]-2,1,3-benzothiadiazole, 4,8-bis(1,3-diselenol-2-ylidene)-4H,8H-benzo[1,2-c:4,5-c']bis[1,2,5]thiadiazole, and tetramethyl-BTQBT. We present first-principles density functional theory (DFT) calculations that agree well with earlier angle-resolved photoelectron spectroscopy (ARPES) experiments on BTQBT films, strongly supporting that the BTQBT films adopt the same layered structure as in the single crystals. Qualitative charge transport properties based on presented DFT results agree with experiments regarding the sign of the charge carriers and the unusually small anisotropy of conductivity. These agreements indicate that accurate electronic structure calculations, when coupled with ARPES, help establish the correlation between intermolecular packing and charge transport, which is one of the central but elusive aspects of organic molecular materials. Predictions are made for derivatives of BTQBT, and calculations agree with available experimental information on the conductivities. Comparisons are made with pentacene, one of the most widely studied organic molecular materials.     

Donor-acceptor conjugated polymer based on naphtho[1,2-c:5,6-c]bis[1,2,5]thiadiazole for high-performance polymer solar cells

Donor-acceptor conjugated polymers PBDT-DTBT and PBDT-DTNT, based on 2,1,3-benzothiadiazole (BT) and naphtho[1,2-c:5,6-c]bis[1,2,5]thiadiazole (NT), have been designed and synthesized for polymer solar cells. NT contains two fused 1,2,5-thiadiazole rings that lower the band gap, enhance the interchain packing, and improve the charge mobility of the resulting polymer. Consequently, the NT-based polymer PBDT-DTNT exhibited considerably better photovoltaic performance with a power conversion efficiency (PCE) of 6.00% when compared with the BT-based polymer PBDT-DTBT, which gave a PCE of 2.11% under identical device configurations.     

Heterocirculenes as a new class of organic semiconductors

We report a fabrication of field-effect transistors using the new organic semiconductors octathio[8]circulene and tetrathiotetraseleno[8]circulene . The maximum hole mobility of 9 x 10(-3) cm(2) V(-1) s(-1) is, most likely, limited by one-dimensional growth of and in thin films.     

Relationship between crystal packing and high electron mobility in the single crystal of thienyl-substituted methanofullerene

The X-ray crystal structure of 1-(3-methoxy-carbonyl)-propyl-1-thienyl-[6,6]-methanofullerene (ThCBM) was determined and the electron mobility of the single crystal was measured using a TRMC method to reveal high electron mobility (2 cm(2) V(-1) s(-1)) along the long axis (a-axis) and its remarkable anisotropy (7 times).     

The chemistry of 1,2,5-thiadiazoles,IV. Benzo[1,2-c:3,4-c′:5,6-c″] tris [1,2,5] thiadiazole

Benzo [1,2-c:3,4-c′:5,6-c″] tris [1,2,5] thiadiazole (1) was synthesized from benzo [1,2-c:3,4-c′] - bis [1,2,5] thiadiazole (11) . Nitration of 11 gave compound 15 , which on direct amination gave nitroamine 17 . Reduction of 17 gave diamine 18 , and cyclization of 18 with thionyl chloride gave 1 . Diamine 18 was also cyclized with selenium oxychloride, glyoxal, 9,10-phenanthrene-quinone, and formic acid to give the compounds 4, 5, 19 , and 6 , respectively. A new procedure for the preparation of 2,1,3-benzothiadiazole (7) from o-phenylenediamine was used.     

Interface engineering in high-performance low-voltage organic thin-film transistors based on 2,7-dialkyl-[1]benzothieno[3,2-b][1]benzothiophenes

We investigated two different (2,7-dialkyl-[1]benzothieno[3,2-b][1]benzothiophenes; C(n)-BTBT-C(n), where n = 12 or 13) semiconductors in low-voltage operating thin-film transistors. By choosing functional molecules in nanoscaled hybrid dielectric layers, we were able to tune the surface energy and improve device characteristics, such as leakage current and hysteresis. The dipolar nature of the self-assembled molecules led to a shift in the threshold voltage. All devices exhibited high charge carrier mobilities of 0.6-7.0 cm(2) V(-1) s(-1). The thin-film morphology of BTBT was studied by means of atomic force microscopy (AFM), presented a dependency upon the surface energy of the self-assembled monolayer (SAM) hybrid dielectrics but not upon the device performance. The use of C(13)-BTBT-C(13) on hybrid dielectrics of AlO(x) and a F(15)C(18)-phosphonic acid monolayer led to devices with a hole mobility of 1.9 cm(2) V(-1) s(-1) at 3 V, on/off ratio of 10(5), small device-device variation of mobility, and a threshold voltage of only -0.9 V, thus providing excellent characteristics for further integration.     

Benzo[1,2‐c:3,4‐c']bis[1,2,5]selenadiazole, [1,2,5]selenadiazolo‐[3,4‐e]‐2,1,3‐benzothiadiazole,furazanobenzo‐2,1,3‐thiadiazole,furazanobenzo‐2,1,3‐selenadiazole and related heterocyclic systems

The first synthesis of benzo[1,2‐c:3,4‐c']bis[1,2,5]selenadiazole has been developed starting from commercially available 4‐nitrobenzo‐2,1,3‐selenadiazole. Improved syntheses of the related heterocycles [1,2,5]selenadiazolo[3,4‐e]‐2,1,3‐benzothiadiazole, furazanobenzo‐2,1,3‐thiadiazole and furazanobenzo‐2,1,3‐selenadiazole are also reported.     

Influence of the alkyl and alkoxy side chains on the electronic structure and charge-transport properties of polythiophene derivatives

Density Functional Theory has been used to study the structural, electronic and charge-transport properties of two regio-regular head-to-tail polythiophene derivatives, i.e. poly(3-hexyl-thiophene), P3HT, and poly(3-oxyhexyl-thiophene), P3OHT. The effect of substituents on the electronic structure was analyzed by means of bandwidth, bandgap, effective mass, total and partial densities of states and crystal orbital overlap populations. Electronic couplings were estimated from band diagrams as the splitting of the valence band. The neutral and cationic states of isolated oligomers were optimized using the supercell approximation. The hole-transfer rates and mobilities were evaluated according to Marcus's theory. Results provide a compelling illustration of the effect of side chains on the crystal packing, electronic structure and charge-transport properties. Thus, the hole mobility calculated for the alkyl derivative was 0.15 cm(2) V(-1) s(-1) (experimental mobility is 0.10 cm(2) V(-1) s(-1)), while the alkoxy derivative has a theoretical mobility of 0.49 cm(2) V(-1) s(-1). The obtained results hopefully could motivate experimentalists to try out P3OHT for an improved charge carrier mobility.     

平面型给-受体共轭聚合物的合成及在体异质结聚合物太阳能电池中的应用

设计合成了主链为聚2,8-{5,11-二烷基吲哚[3,2-b]咔唑}-4,7[2,5-噻吩]-二-5,6-二烷氧基-2,1,3-苯并噻二唑, 具有不同侧链的2种平面型给-受体共轭聚合物(QP-2和QP-3), 研究了其热学、光物理和光伏性质. 用聚合物-PC₇₁BM([6,6]-苯基C₇₁丁酸甲酯)共混物作为活性层构筑了本体异质结聚合物太阳能电池. 其中以QP-3为给体、以PC₇₁BM为受体的光伏电池能量转换效率最高达到2.59%, 开路电压为0.72 V, 短路电流为9.24 mA/cm², 填充因子为0.38. XRD结果表明, 平面型共轭聚合物具有较好的结晶性, 原子力显微镜(AFM)显示平面型共轭聚合物易于发生微观相分离.