Effect of boron non-stoichiometry on B-site in perovskite type structure ScBxRh3 and CeBxRh3 on charges of atoms on A-site: study by X-ray photoelectron and nuclear magnetic resonance spectroscopies

The solid solutions of ScBRh₃-ScRh₃ and CeBRh₃-CeRh₃ are synthesized by the arc melting method, where RBRh₃ and RRh₃ (R=rare earth element) have perovskite and AuCu₃ type structures, respectively. The binding energy of Sc 2p_3/2 for ScB_xRh₃ increases with the boron concentration. The Knight shift of ⁴⁵Sc observed by nuclear magnetic resonance spectroscopy decreases with increase of boron concentration. The decrement of the Knight shift corresponds the Sc 4s electron density at the Fermi level. The intensity ratio of f²: f¹: f⁰ of Ce 3d XPS spectrum changes with boron concentration of CeB_xRh₃. It is concluded that in both cases of ScB_xRh₃ and CeB_xRh₃ the charge on the atoms on A-site changes with the concentration of the atoms on B-site, where the atoms are not directly bound.     

Flow-injection chemiluminescence determination of aminomethylbenzoic acid and aminophylline based on N-bromosuccinimide-luminol reaction

A novel and sensitive chemiluminescence (CL) method for the determination of aminomethylbenzoic acid and aminophylline coupled with flow-injection analysis (FIA) technique is developed in this paper. It is based on the inhibition effect of the studied drugs on the chemiluminescence emission of N-bromosuccinimide-luminol (NBS-luminol) system. Under the optimum conditions, the decreased CL intensity is linear with the concentration of aminomethylbenzoic acid in the range of 2×10⁻⁸ to 1.0×10⁻⁶ g ml⁻¹ and with the concentration of aminophylline in the range of 1×10⁻⁷ to 7.0×10⁻⁶ g ml⁻¹, respectively. The detection limit is 7.0×10⁻⁹ g ml⁻¹ for aminomethylbenzoic acid (3σ) and 3.4×10⁻⁸ g ml⁻¹ for aminophylline (3σ). The relative standard deviations (R.S.D.) for 11 parallel measurements of 2.0×10⁻⁷ g ml⁻¹ aminomethylbenzoic acid and 1.0×10⁻⁶ g ml⁻¹ aminophylline are 2.6 and 3.0%, respectively. The proposed methods have been applied for the determination of the studied drugs in their pharmaceutical formulations with satisfactory results. The possible use of the proposed system for the determination of aminomethylbenzoic acid in plasma sample was also tested. The possible inhibition mechanism of aminomethylbenzoic acid and aminophylline on luminol-NBS system was discussed briefly.     

Selectivity for Cs and Sr in Nb-substituted titanosilicate with sitinakite topology

The 25% niobium substituted crystalline titanosilicate with the composition Na_1.5Nb_0.5Ti_1.5O₃SiO₄·2H₂O (Nb-TS) was synthesized under hydrothermal conditions. Its selectivity for radioactive ¹³⁷Cs and ⁸⁹Sr was compared with the TS, Na₂Ti₂O₃SiO₄·2H₂O, having sitinakite topology. The Nb-TS shows significantly higher uptake value for ¹³⁷Cs but lower for ⁸⁹Sr than the TS. To investigate the origin of selectivity, the ion exchanged Cs⁺ and Sr²⁺ forms with the composition, Cs_xNaH_yNb_0.5Ti_1.5O₃SiO₄·zH₂O (x=0.1, 0.2 and 0.3, x+y=0.5 and z=1-2) and Sr_0.2Na_0.6H_0.5Nb_0.5Ti_1.5O₃SiO₄·H₂O, respectively, were structurally characterized from the X-ray powder diffraction data using the Rietveld refinement technique. Simultaneously the kinetics of ¹³⁷Cs and ⁸⁹Sr uptake was investigated for the Nb^V free and doped samples. While the Cs⁺ and Sr²⁺ exchanged form of Nb-TS and the Cs⁺ exchanged form of TS retain the symmetry of the parent compound, the Sr²⁺ exchanged form of TS undergoes a symmetry change. The differences in the uptake of Cs⁺ and Sr²⁺ result from the different coordination environments of cesium and strontium in the eight-ring channel, that result from various hydration sites in the tunnel. The origin of selectivity appears to arise from the higher coordination number of cesium or strontium. Other effects due to Nb^V substitution are reflected in the increase of both, the a- and c-dimensions and thus the unit cell volume, and the population of water vs. Na⁺ in the channel to charge-balance the Nb⁵⁺↔Ti⁴⁺ substitution.     

A structural study of ternary lanthanide orthoscandate perovskites

Ternary lanthanide scandates (Ln=La, Pr, Nd, Sm, Eu, Gd, Tb, Dy, and Ho) have been synthesized at ambient pressure. Their structure has been investigated at room temperature by Rietveld analysis of powder X-ray diffraction data. The Ln-scandates are orthorhombic perovskites, adopting space group Pbnm (? 62), a≈b≈√2a_p, c≈2a_p, Z=4. Heavy lanthanides (Er-Lu), and Y do not form perovskites at ambient conditions. Compositionally driven phase transitions were not observed. The unit-cell parameters decrease with increasing ScO₆ octahedron rotation and atomic number of the Ln cation. In common with lanthanide orthoferrites, the uniform structural evolution is interrupted at the middle-heavy part of the lanthanide sequence. This is probably due to an interplay between: (i) enlargement of the ScO₆ octahedra relative to BO₆ in other perovskites (e.g., FeO₆ in GdFeO₃); (ii) reduction in size of the first coordination sphere of Ln³⁺ coincident with the lanthanide contraction; (iii) coincident expansion of the second coordination sphere due to screening effects of O^I1 on O^I2, and entry of Sc to the lanthanide coordination sphere; (iv) complex mixing between oxygen and lanthanide lanthanide f- and scandium d-orbitals. In the series studied, Ln³⁺ are in eight-fold coordination (tetragonal antiprism), and are considerably displaced from the center of the LnO₈ polyhedron along [001]. Evolution of the crystallochemical characteristics through the Ln orthoscandate series is complex due to both the antipathetic distortions of A- and B-site coordination polyhedra and interaction of the orbitals of oxygen, Ln and Sc. Empirically obtained limits of Goldschmidt and observed ^viiit_o tolerance factors for ternary LnBO₃ compounds adopting the Pbnm structure are 0.795 and 0.841, respectively.     

Fluorimetric determination of phytic acid in urine based on replacement reaction

A sensitive fluorimetric method for determination of phytic acid in human urine samples was described. The method was based on a fluorimetric replacement reaction, in which the added phytic acid replaced the Cu²⁺ ion from Cu²⁺-gelatin complex, liberating the fluorescent gelatin molecule. The fluorescence of the solution was accordingly recovered proportionally to the amount of the foreign phytic acid. The excitation wavelength was 273.5 nm and the characteristic emission wavelength was 305.0 nm, respectively. The calibration graph was obtained by plotting the recovered fluorescent intensity at maximum 305.0 nm against the added standard phytic acid, and was divided into two sections. One section was linear over the range of 0.40-2.40 mg L⁻¹ with a linear regression equation of I_f = −0.895 + 15.146c (R² > 0.9993), and the other over the range of 2.40-9.20 mg L⁻¹ with a linear regression equation of I_f = −29.526 + 26.113c (R² > 0.9996), respectively. The relative standard deviation (R.S.D.) at 95% confidence degree for a 2.0 mg L⁻¹ of standard phytic acid within 1 month was less than 1.26% (n = 5), indicating the procedure is reproducible. The detection and the quantification limits of phytic acid were estimated to be 0.23 and 0.40 mg L⁻¹, respectively. The proposed method was applied to the determination of phytic acid in urine samples and the found concentrations of phytic acid in urine were in the range of 0.49-0.75 mg L⁻¹ with recoveries of 96.2-108.8%. Comparison of the obtained results with the reported HPLC was performed, indicating the proposed method was reliable.     

Characterization of Ascentis RP-Amide column: Lipophilicity measurement and linear solvation energy relationships

This study investigates lipophilicity determination by chromatographic measurements using the polar embedded Ascentis RP-Amide stationary phase. As a new generation of amide-functionalized silica stationary phase, the Ascentis RP-Amide column is evaluated as a possible substitution to the n  -octanol/water partitioning system for lipophilicity measurements. For this evaluation, extrapolated retention factors, log k^′_w$\text{log}{k^{\prime }}_w$, of a set of diverse compounds were determined using different methanol contents in the mobile phase. The use of n-octanol enriched mobile phase enhances the relationship between the slope (S  ) of the extrapolation lines and the extrapolated log k^′_w$\text{log}{k^{\prime }}_w$ (the intercept of the extrapolation), as well as the correlation between log P   values and the extrapolated log k^′_w$\text{log}{k^{\prime }}_w$ (1:1 correlation, r² = 0.966). In addition, the use of isocratic retention factors, at 40% methanol in the mobile phase, provides a rapid tool for lipophilicity determination. The intermolecular interactions that contribute to the retention process in the Ascentis RP-Amide phase are characterized using the solvation parameter model of Abraham. The LSER system constants for the column are very similar to the LSER constants of the n-octanol/water extraction system. Tanaka radar plots are used for quick visual comparison of the system constants of the Ascentis RP-Amide column and the n-octanol/water extraction system. The results all indicate that the Ascentis RP-Amide stationary phase can provide reliable lipophilic data.     

1D + 1D model of a DMFC: localized solutions and mixedpotential

Our 1D + 1D model of DMFC reveals a new effect. At infinitely small total current in the cell, near the channel inlet forms a “bridge”, a narrow region with finite local current density. The bridge short-circuits the electrodes, thus reducing cell open-circuit voltage. In our previous work the effect is described for the case of equal methanol λ^a and oxygen λ^c stoichiometries. In this Letter, we analyze the general case of arbitrary λ^a and λ^c. In the case of λ^a > λ^c current may occupy finite domain of the cell surface. Asymptotic solution for the case of λ^a  λ^c shows, that the size of this domain is proportional to oxygen stoichiometry. In the opposite limit of λ^a  λ^c local current exponentially decreases with the distance along the channel. Asymptotic solutions suggest that the bridge forms regardless of the relationship between λ^a and λ^c. In all cases local current density in the bridge increases with the rate of methanol crossover and decreases with the growth of the “rate-determining” stoichiometry. The expression for voltage loss at open-circuit is derived.     

Hydrogen bond strength in chromates with kröhnkite-type chains, K2Me(CrO4)2·2H2O (Me = Mg, Co, Ni, Zn, Cd)

Infrared spectra of the title compounds with kröhnkite-type infinite octahedral–tetrahedral chains, K₂Me(CrO₄)₂·2H₂O (Me = Mg, Co, Ni, Zn, Cd), are presented in the regions of the uncoupled O–D stretching modes of matrix-isolated HDO molecules (isotopically dilute samples) and water librations. The strengths of the hydrogen bonds are discussed in terms of the respective O_wO bond distances, the Me–water interactions (synergetic effect), the proton acceptor capability of the chromate oxygen atoms as deduced from Brown's bond valence sum of the oxygen atoms. The spectroscopic experiments reveal that hydrogen bonds of medium strength are formed in the chromates. The hydrogen bond strengths decrease in the order Cd > Zn > Ni > Co in agreement with the decreasing covalency of the respective Me–OH₂ bonds in the same order, i.e. decreasing acidity of the water molecules. The infrared band positions corresponding to the water librations confirm the claim that the hydrogen bonds in K₂Cd(CrO₄)₂·2H₂O are stronger than those formed in K₂Mg(CrO₄)₂·2H₂O on one hand, and on the other—the hydrogen bonds in K₂Ni(CrO₄)₂·2H₂O are stronger than those in K₂Co(CrO₄)₂·2H₂O.     

(Ca,Me)La4Si3O13:Eu3+(Me=Sr,Ba)荧光粉的结构和发光特性

采用高温固相法制备了(Ca,Me)La4Si3O13∶Eu3+(Me=Sr,Ba)系列红色荧光体,考察了Eu3+掺杂浓度和Sr2+,Ba2+置换对荧光体结构和发光特性的影响。Eu3+最佳掺杂浓度为nEu3+∶nLa3+=1∶7,5D0-7F2与5D0-7F1跃迁发射强度比为2.55。Eu3+掺杂使晶胞参数a和c呈线性变小,对c的影响大于a,使a/c比增大。Sr2+和Ba2+分别置换基质中的Ca2+可以形成完全固溶体,晶胞参数随Sr2+或Ba2+的置换量增加呈线性增大,使a/c比减小。各发射峰强度在Sr2+置换量为0.4 mol时出现极大值,但随Ba2+置换量的增加而不断增强,全置换后荧光强度最大。荧光体的色坐标为(0.638 5,0.353 0)。     

Raman spectra and structural features of ClOF2 + cation in a solution of anhydrous HF

The Raman spectra of ClOF₂ ⁺ cation in solutions of anhydrous HF were studied. In the ClOF₂ ⁺HF₂ ⁻ and ClOF₂ ⁺BF₄ ⁻−HF systems, this cation exists as a pyramidal structure (C _s symmetry), while in the ClOF₂ ⁺AuF₆ ⁻−HF system, it exists as a planar structure (C _2v symmetry). Based on nonempirical calculations by the Hartree-Fock-Roothaan method, an explanation for the dependence of the structure of the ClOF₂ ⁺ cation on the nature of the anion was proposed. For the Cl−O bond vibrations, the correlation functions of vibrational and rotational relaxations were calculated, and the characteristic times of these processes were determined. The main contribution to the formation of the band contours corresponding to the above-mentioned modes is made by the vibrational dephasing. Translated fromIzvestiya Akademii Nauk, Seriya Khimicheskaya, No. 3, pp. 432–437, March, 1998.     

Crystal structure, microstructure and reducibility of LaNixCo1−xO3 and LaFexCo1−xO3 Perovskites (0<x≤0.5)

Nickel and iron substituted LaCoO₃ with rhombohedrally distorted perovskite structure were obtained in the temperature range of 600-900 °C by thermal decomposition of freeze-dried citrates and by the Pechini method. The crystal structure, morphology and defective structure of LaCo_1−xNi_xO₃ and LaCo_1−xFe_xO₃ were characterized by X-ray diffraction and neutron powder diffraction, TEM and SEM analyses and electron paramagnetic resonance spectroscopy. The reducibility was tested by temperature programmed reduction with hydrogen. The products of the partial and complete reduction were determined by ex-situ XRD experiments. The replacement of Co by Ni and Fe led to lattice expansion of the perovskite structure. For perovskites annealed at 900 °C, there was a random Ni, Fe and Co distribution. The morphology of the perovskites does not depend on the Ni and Fe content, nor does it depend on the type of the precursor used. LaCo_1−xNi_xO₃ perovskites (x>0.1) annealed at 900 °C are reduced to Co/Ni transition metal and La₂O₃ via the formation of oxygen deficient Brownmillerite-type compositions. For LaCo_1−xNi_xO₃ annealed at 600 °C, Co/Ni metal, in addition to oxygen-deficient perovskites, was formed as an intermediate product at the initial stage of the reduction. The interaction of LaCo_1−xFe_xO₃ with H₂ occurs by reduction of Co³⁺ to Co²⁺ prior to the Fe³⁺ ions. The reducibility of Fe-substituted perovskites is less sensitive towards the synthesis procedure in comparison with that of Ni substituted perovskites.     

Kinetic simulation of living carbocationic polymerizations. II. Simulation of living isobutylene polymerization using a mechanistic model

This paper discusses the kinetic simulation of TiCl₄--coinitiated living carbocationic isobutylene (IB) polymerizations governed by dormant-active equilibria, using a mechanistic model. Two kinetic models were constructed from the same underlying mechanism: one using a commercial simulation software package (Predici^®), and the other using the method of moments. Parameter estimation from experimental batch reactor data with Predici yielded a rate constant of propagation k_p = 4.64 × 10⁸ ± 2.75 × 10⁸ L/mol s, with no constraints imposed. This agrees with k_p data measured with diffusion clock and competition methods, but disagrees with kinetically obtained k_p values. Estimation of rate constants with Predici^® and the GREG parameter estimation software packages revealed that it was difficult to estimate the complete set of kinetic parameters, due to correlated effects of the parameters on model predictions. Estimability analysis confirmed that some of the strongly correlating parameters could not be estimated simultaneously using the available experimental data. Using k_p = 6 × 10⁸ ± 2.75  × 10⁸ L/mol s measured by Mayr, and using starting estimates of other rate constants defined by experimentally observed correlations, yielded the set of rate constants required for the simulations. Both kinetic models yielded good agreement with experimental data, with the exception of M_w values that slightly diverged from the theoretically predicted ‘M_w−M_n = constant’ relationship. This may indicate the occurrence of a minor side reaction. However, the k_p/k₋₁ = 17.5 L/mol average run length calculated from measured and simulated MWD data agrees well with earlier literature values.     

Isomerism in OBe3F3 + cation: anab initio study

Ab initio MP2/6-31G^*//HF/6-31G^*+ZPE(HF/6-31G^*) calculations of the potential energy surface in the vicinity of stationary points and the pathways of intramolecular rearrangements between low-lying structures of the OBe₃F₃ ⁺ cation detected in the mass spectra of μ₄-Be₄O(CF₃COO)₆ were carried out. Ten stable isomers with di- and tricoordinate oxygen atoms were localized. The relative energies of six structures lie in the range 0–8 kcal mol⁻¹ and those of the remaining four structures lie in the range 20–40 kcal mol⁻¹. Two most favorable isomers, aC _2v isomer with a dicoordinate oxygen atom, planar six-membered cycle, and one terminal fluorine atom and a pyramidalC _3v isomer with a tricoordinate oxygen atom and three bridging fluorine atoms, are almost degenerate in energy. The barriers to rearrangements with the breaking of one fluorine bridge are no higher than 4 kcal mol⁻¹, except for the pyramidalC _3v isomer (∼16 kcal mol⁻¹). On the contrary, rearrangements with the breaking of the O−Be bond occur with overcoming of a high energy barrier (∼24 kcal mol⁻¹). A planarD _3h isomer with a tricoordinate oxygen atom and linear O−Be−H fragments was found to be the most favorable for the OBe₃H₃ ⁺ cation, a hydride analog of the OBe₃F₃ ⁺ ion; the energies of the remaining five isomers are more than 25 kcal mol⁻¹ higher. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 420–430, March, 1999.     

Structural, spectroscopic and photoluminescence studies of LiEu(WO4)2−x(MoO4)x as a near-UV convertible phosphor

A series of lithium europium double tungsto-molybdate phosphors LiEu(WO₄)_2−x(MoO₄)_x (x=0, 0.4, 0.8, 1.2, 1.6, 2.0) have been synthesized by solid-state reactions and their crystal structure, optical and luminescent properties were studied. As the molybdate content increases, the intensity of the ⁵D₀→⁷F₂ emission of Eu³⁺ activated at wavelength of 396 nm was found to increase and reach a maximum when the relative ratio of Mo/W is 2:0. These changes were found to be accompanied with the changes in the spectral feature, which can be attributed to the crystal field splitting of the ⁵D₀→⁷F₂ transition. As the molybdate content increases the emission intensity of the 615 nm peak also increases. The intense red-emission of the tungstomolybdate phosphors under near-UV excitation suggests them to be potential candidate for white light generation by using near-UV LEDs. In this study the effect of chemical compositions and crystal structure on the photoluminescent properties of LiEu(WO₄)_2−x(MoO₄)_x is investigated and discussed.     

FTIR study of the sol–gel synthesis of cementitious gels: C–S–H and N–A–S–H

The study explored the compatibility between the main product of Portland cement hydration and the main product of the alkali activation of fly ash: C–S–H and N–A–S–H gels, respectively. Both gels were synthesized with laboratory reagents at different pH values. Blends of the two were synthesized as well, using the sol–gel procedure. All the gels were characterized with Fourier transform IR spectroscopy (FTIR). The gels synthesized with this procedure were shown to precipitate together with a silica-rich gel. In addition, the pH level was found to play a determinant role in both C–S–H and N–A–S–H gel synthesis. The C–S–H gel is the major phase formed at pH > 11 and N–A–S–H gel for pH > 12. The results relating to the joint synthesis of the two (C–S–H and N–A–S–H) gels were not conclusive. Technique used for the characterization failed to differentiate between them in the blended material.

Fluorimetric and conductometric study of water—n-octane—sodium dodecyl sulfate—n-pentanol microemulsions

The influence of the water concentration in the water—n-octane—sodium dodecyl sulfate—n-pentanol microemulsions on the polarity index I ₁/I ₃, the efficiency of formation of the fluorescent probe (pyrene) excimers I _ex/I _m, and the conductivity of the system in a wide interval of water—oil ratios was studied. Analysis of changes in the polarity index shows that in all types of the microemulsions pyrene is solubilized in the hydrophobic part of the water—oil interface between the surfactant hydrocarbon radicals. Depending on the water—oil ratio, the site of its localization changes, and the effective permittivity of the medium _eff varies from 5 to 11. Variations of the conductivity and polarity index allow one to observe three structures in the mucroemulsion, viz., water—oil, bicontinual region, and oil—water. Variation of the I _ex/I _m ratio reveals only the transition from the water—oil microemulsion to the oil—water microemulsion.     

Synthesis and Properties of The Solid Solutions Formed in The Fe2V4O13–Cr2V4O13 System

DTA and XRD studies of the Fe₂V₄O₁₃–Cr₂V₄ O₁₃ system have shown that continuous solid solutions of a Fe_2–xCr_xV₄O₁₃ type, bearing a Fe₂ V₄ O₁₃ structure, are formed in the system. With the increasing degree of the Cr3+ ion incorporation into the Fe₂ V₄ O₁₃ structure, a contraction of the solid solution crystal lattice develops. Solid solutions of a Fe_2–x Cr_x V₄ O₁₃ type melt incongruently, their melting temperature increasing from 953 to 1003 K with increase in the degree of the Cr³⁺ ion incorporation. The solid product of melting Fe_2–x Cr_x V₄ O₁₃ solid solutions for 0.2<x >1.2 is the Fe_1–x Cr_x VO₄ solution phase, and for x ≤0.2 and x ≥1.4 – the Fe_1–x Cr_x VO₄ phase as well as FeVO₄ or CrVO₄ , respectively. This revised version was published online in July 2006 with corrections to the Cover Date.     

Zn4Si2O7(OH)2H2O盐修饰的纳米Ru催化剂催化苯选择加氢制环己烯

利用沉淀法制备了纳米Ru催化剂,在ZnSO₄存在下考察了Na₂SiO₃·9H₂O和二乙醇胺作反应修饰剂对Ru催化剂催化苯选择加氢制环己烯性能的影响,并用X-射线衍射(XRD)、X-射线荧光光谱(XRF)和透射电镜-能量散射谱(TEM-EDS)等物理化学手段对加氢前后Ru催化剂进行了表征。结果表明,在水溶液中Na₂SiO₃与ZnSO₄可以反应生成Zn₄Si₂O₇(OH)₂H₂O盐、H₂SO₄和Na₂SO₄,化学吸附在Ru催化剂表面上的Zn₄Si₂O₇(OH)₂H₂O盐起着提高Ru催化剂环己烯选择性的关键作用。Na₂SiO₃·9H₂O量的增加,生成的Zn₄Si₂O₇(OH)₂H₂O盐逐渐增加,Ru催化剂的活性降低,环己烯选择性逐渐升高。向反应体系中加入二乙醇胺,它可以中和Na₂SiO₃与ZnSO₄反应生成的硫酸,使化学平衡向生成更多的Zn₄Si₂O₇(OH)₂H₂O盐的方向移动,导致Ru催化剂环己烯选择性增加。当Ru催化剂与ZnSO₄·7H₂O、Na₂SiO₃·9H₂O和二乙醇胺、分散剂ZrO₂的质量比为1.0:24.6:0.4:0.2:5.0时,2 g Ru催化剂上苯转化73%时环己烯选择性和收率分别为75%和55%,而且该催化剂体系具有良好的重复使用性和稳定性。     

Electronic state of Fe used as Mössbauer probe in the perovskites LaMO3 (M=Ni and Cu)

For the first time a comparative study of rhombohedral LaNiO₃ and LaCuO₃ oxides, using ⁵⁷Fe Mössbauer probe spectroscopy (1% atomic rate), has been carried out. In spite of the fact that both oxides are characterized by similar crystal structure and metallic properties, the behavior of ⁵⁷Fe probe atoms in such lattices appears essentially different. In the case of LaNi_0.99Fe_0.01O₃, the observed isomer shift (δ) value corresponds to Fe³⁺ (3d⁵) cations in high-spin state located in an oxygen octahedral surrounding. In contrast, for the LaCu_0.99Fe_0.01O₃, the obtained δ value is comparable to that characterizing the formally tetravalent high-spin Fe⁴⁺(3d⁴) cations in octahedral coordination within Fe(IV) perovskite-like ferrates. To explain such a difference, an approach based on the qualitative energy diagrams analysis and the calculations within the cluster configuration interaction method have been developed. It was shown that in the case of LaNi_0.99Fe_0.01O₃, electronic state of nickel is dominated by the d⁷ configuration corresponding to the formal ionic “Ni³⁺-O²⁻” state. On the other hand, in the case of LaCu_0.99Fe_0.01O₃ a large amount of charge is transferred via Cu-O bonds from the O:2p bands to the Cu:3d orbitals and the ground state is dominated by the d⁹L configuration (“Cu²⁺−O” state). The dominant d⁹L ground state for the (CuO₆) sublattice induces in the environment of the ⁵⁷Fe probe cations a charge transfer Fe³⁺+O⁻(L)→Fe⁴⁺+O²⁻, which transforms “Fe³⁺” into “Fe⁴⁺” state. The analysis of the isomer shift value for the formally “Fe⁴⁺” ions in perovskite-like oxides clearly proved a drastic influence of the 4s iron orbitals population on the Fe−O bonds character.     

Fluorescence enhancement effect for the determination of DNA with calcein-cetyl trimethyl ammonium bromide system

A new spectrofluorimetric method was developed for the determination of trace amounts of DNA using the calcein as a fluorescent probe. In the presence of appropriate amounts of the cationic surfactant cetyl trimethyl ammonium bromide (CTAB), the anionic dye calcein dimerizes. The weak fluorescence intensity of the dimer was enhanced by adding DNA at pH 6–7. The interaction between calcein–CTAB and DNA was studied on the basis of this behavior and a new method was developed for determining DNA. Under the optimal conditions, the enhanced fluorescence intensity was in proportion to the concentration of DNA in the range of 4.0 × 10⁻⁶ to 8.0 × 10⁻⁵ g L⁻¹ for fsDNA and thermally denatured ctDNA (4.5 × 10⁻⁶ to 9.0 × 10⁻⁵ g L⁻¹). The detection limits (S/N = 3) were 2.0 × 10⁻⁶ and 2.2 × 10⁻⁶ g L⁻¹, respectively. This method was used for determining the concentration of DNA in synthetic samples with satisfactory results.