Determination of dimethylselenide and dimethyldiselenide in milk and milk by-products by solid-phase microextraction and gas chromatography with atomic emission detection

A method based on solid-phase microextraction (SPME) followed by gas chromatography with microwave-induced plasma atomic emission detection for determining dimethylselenide (DMSe) and dimethyldiselenide (DMDSe) in milk and milk by-products is proposed. Parameters affecting the SPME, such as sample volume or mass, ionic strength, adsorption and desorption times and temperatures were optimized in the headspace mode. The matrix effect was evaluated for the different samples studied, concluding that standard additions calibration was required for quantification purposes. The detection limits ranged from 70 to 110 pg mL⁻¹ for DMSe and from 80 to 400 pg mL⁻¹ for DMDSe, depending on the sample under analysis. None of the twenty-three samples analyzed contained the studied compounds at concentrations above the corresponding detection limits.     

Determination of dimethylsulfide and dimethylselenide in human urine by portable gas chromatography–photoionization detection with headspace sampling

A simple and sensitive method for the determination of dimethylsulfide (DMS) and dimethylselenide (DMSe) employing a gas chromatograph–photoionization detector with headspace sampling (HS-GC-PID) was developed. Parameters affecting the HS-GC-PID sensitivity including matrix effect, heating temperature, extraction time and carrier gas flow-rate were optimized. The matrix effect was required for standard addition calibration method for quantification purposes. The method has been validated when rectilinear relationship was between the concentrations of analytes and peak area in the range of 0.2–50 ng mL^{− 1} for DMSe and 0.5–100 ng mL^{− 1} for DMS, the correlation coefficients were from 0.995–0.998, and the limits of detection for DMS and DMSe were 25 pg mL^{− 1} and 48 pg mL^{− 1}, respectively. The proposed method was further applied to quantification of DMS and DMSe in urine samples.     

Purge and trap/thermal desorption device for the determination of dimethylselenide and dimethyldiselenide

A method is described for the determination of dimethylselenide and dimethyldiselenide using a purge-and-trap/thermal desorption device (PT/TD) coupled to a capillary column gas chromatograph with a six-way Valco valve. The system is constructed in such a way that it allows also on-column injections of the volatile compounds in organic solvents for external calibration purposes without the need to disassemble the PT/TD. The influence of the purge flow, purge time and volume of sample, on the purge efficiency of the PT system is studied. Desorption time and temperature are optimised for the TD mode of operation. Atomic absorption spectrometry (AAS) and flame photometric detection (FPD) have been used for the final determination of the volatile compounds. The figures of merit achieved with both detectors are reported.     

Gas chromatography with atomic emission detection for dimethylselenide and dimethyldiselenide determination in waters and plant materials using a purge-and-trap preconcentration system

Dimethylselenide (DMSe) and dimethyldiselenide (DMDSe) were determined in plant and water samples by capillary gas chromatography using microwave induced-plasma atomic emission spectrometry for detection. The analytes were leached from the solid samples into methanol by using an ultrasonic probe, and a portion of the extract was preconcentrated by means of a purge-and-trap system before being chromatographed. The analytes were directly purged from the water samples in the presence of 6% (v/v) methanol. Element-specific detection and quantification was carried out by monitoring the selenium (196 nm) emission line. Calibration curves were obtained by plotting peak area versus concentration and the correlation coefficients for linear calibration were 0.9999 for both analytes. Detection limits of 0.8 and 1.1 ng l(-1) were obtained for DMSe and DMDSe, respectively, for water samples. For plant materials, the detection limits calculated for 0.5 g samples were 0.3 and 0.4 ng g(-1) for DMSe and DMDSe, respectively. Concentration levels of DMSe ranging from 1.2 to 4.2 ng g(-1) were found in some of the plant materials analyzed. No DMDSe was found in any of the samples. The accuracy of the method was checked by analyzing different spiked water and plant samples.     

Determination of tobacco alkaloids by gas chromatography with nitrogen-phosphorus detection

An improved method, gas chromatography (GC) with nitrogen-phosphorus detection (NPD), has been used for determination of alkaloids in green and cured tobacco. Tobacco alkaloids of interest included nicotine, nornicotine, myosmine, anabasine, and anatabine. Tobacco samples were treated with a small quantity of aqueous ammonia solution to "loosen" tobacco tissue and to adjust pH, then extracted with solvent. The composition of the extraction solvent solution affected recoveries of the alkaloids, particularly nornicotine, and also contributed to other phenomena such as carry-over in the injection liner and "quenching" of the nitrogen-phosphorus detector. Use of a packed injection liner (e.g. with Carbowax-KOH on Chromosorb) to reduce carry-over was studied. Quenching of the nitrogen-phosphorus detector was eliminated by reducing the injection volume (i.e. increasing the split ratio), by use of a packed injection liner, and by reducing the amount of pretreatment with aqueous ammonia. A narrow bore capillary column (i.e. 0.18 mm id) was used to improve sensitivity and resolution and to increase the speed of GC analysis. An internal standard, 2,4'-dipyridyl, was used for quantitative measurement of these tobacco alkaloids.     

Determination of ultramicro amounts of selenium by gas chromatography with electron-capture detection

Formation of piazselenols by the reaction of Se(IV) with 1,2-diaminobenzene and its derivatives, followed by solvent extraction and gas chromatography with electron-capture detection, provides the most sensitive means of determining selenium. By suitable chemical manipulation, the method can be used for Se(-II), Se(O), Se(IV) and Se(VI). Applications to a wide variety of samples are reviewed.     

Determination of busulfan in human plasma by gas chromatography with electron-capture detection

A simple and highly sensitive gas chromatographic method has been developed for the determination of busulfan in human plasma. After extraction of plasma specimens (clinical or spiked) with ethyl acetate, busulfan and the internal standard [1,8-bis(methanesulfonyloxy)octane] were derivatized with 2,3,5,6-tetrafluorothiophenol to yield compounds monitored by a 63Ni electron-capture detector. Sample recoveries from extraction and derivatization were greater than 78 and 91%, respectively. The limit of quantitation was 0.01 microgram/ml (0.04 microM) in 1 ml of plasma with a linear relationship over the 0.01-1.0 micrograms/ml (0.04-4 microM) concentration range. The method has been applied to analyze the plasma versus time profile of busulfan in human subjects following administration of an oral dose of 4 mg/kg per day as a marrow ablative chemotherapy for bone marrow transplantation.     

Determination of toxaphene enantiomers by comprehensive two-dimensional gas chromatography with electron-capture detection

Comprehensive two-dimensional gas chromatography with micro electron-capture detection (GC x GC-microECD) has been evaluated for the enantioseparation of five chiral toxaphenes typically found in real-life samples (Parlar 26, 32, 40, 44 and 50). From the two enantioselective beta-cyclodextrin-based columns evaluated as first dimension column, BGB-176SE and BGB-172, the latter provided the best results and was further combined with three non-enantioselective columns in the second dimension: HT-8, BPX-50 and Supelcowax-10. The combination BGB-172 x BPX-50 was finally selected because it provided a complete separation among all enantiomers. A satisfactory repeatability and reproducibility of the retention times in both the first and the second dimension were observed for all target compounds (RSDs below 0.8%, n = 4). Linear responses in the tested range of 10-200 pg/microl and limits of detection in the range of 2-6 pg/microl were obtained. The repeatability and reproducibility at a concentration of 100 pg/microl, evaluated as the RSDs calculated for the enantiomeric fraction (EF), was better than 11% (n = 4) in all instances. The feasibility of the method developed for real-life analyses was illustrated by the determination of the enantiomeric ratios and concentration levels of the test compounds in four commercial fish oil samples. These results were compared to those obtained by heart-cut multidimensional gas chromatography using the same enantioselective column.     

Determination of pesticides in olives by gas chromatography using different detection systems

A multiresidue method has been developed and optimized for the quantitative analysis of 32 pesticides in olives. The extraction was based on homogenization with light petroleum using a high speed homogenizer. A gel permeation chromatography (GPC) clean-up process with ethyl acetate/cyclohexane (1:1) as mobile phase was applied to the extracts to separate the low-molecular mass pesticides from the high-molecular mass fat constituents of the oil. The target compounds were quantified in the final extract by gas chromatography (GC) using thermoionic specific detection (TSD) and electron-capture detection (ECD). In the case of positive samples, the amounts found were confirmed by GC-MS/MS. The obtained recovery (with mean values between 70 and 121, 71 and 114, and 82 and 134% for ECD, TSD and MS/MS systems, respectively) and RSD values (repeatability, n=10) below 16% in all cases confirm the usefulness of the proposed method for the analysis of this complex sample. Diuron, terbuthylazine and endosulfan sulfate were the most frequently detected residues in olive samples collected during the harvest 2004-2005. Finally, in order to know the proportion of pesticides that are transferred to the oil during olive oil production in olive mills, obtained results in some of the sampled olives applying the proposed method were compared to levels found in the corresponding olive oil, which was obtained by means of the Abencor method.     

Determination of pesticide residues in lettuce by gas chromatography with electron-capture detection

A sensitive, rapid, and simple multiresidue method for the simultaneous determination of 19 pesticides in different varieties of lettuce (Lactuca sativum) was developed. Lettuce samples were extracted by homogenization with acetone and partitioned into ethyl acetate-cyclohexane. Subsequent sample cleanup was not needed. Final determination was made by capillary gas chromatography (GC) with electron-capture detection (ECD). Confirmation analysis of pesticides was performed by GC coupled with mass spectrometry in the selected ion monitoring mode. The average recovery by the GC-ECD method obtained for these compounds varied from 66.4 to 119.2% with relative standard deviations < 7.7%. The GC-ECD method has good linearity, and the detection limit for the pesticides studied varied from 0.1 to 3.8 microg/kg. The proposed method was used to determine pesticide levels in different types of lettuce grown in soils from experimental fields.     

Determination of N tau-methylhistamine in urine by gas chromatography using nitrogen-phosphorus detection

The determination of N tau-methylhistamine in urine, using gas chromatography with nitrogen-phosphorus detection and the homologue N tau-ethylhistamine as internal standard, is described. A comparison between the present method and a previously described stable isotope dilution mass fragmentographic method resulted in a regression line of Y = 0.023 + 0.944X mumol/l with a correlation coefficient of 0.996. The 24-h excretions of 35 normal adults on a free diet ranged from 0.4 to 1.8 mumol. Patients with mastocytosis, chronic myelocytic leukemia, anaphylactic reactions and a patient after bronchial provocation showed above normal values.     

Determination of fluvalinate residues in beeswax by gas chromatography with electron-capture detection

A simple, rapid, and accurate method is described for the determination of residual fluvalinate in beeswax. The procedure consists of partitioning on a disposable column of diatomaceous earth (Extrelut), followed by chromatographic cleanup on a Florisil cartridge. The final extract is analyzed by capillary gas chromatography with electron-capture detection (GC-ECD). Briefly, wax samples were dissolved in n-hexane, and the solutions were sonicated and transferred to Extrelut columns. The fluvalinate was extracted with acetonitrile, and a portion of the extract was cleaned up on a Florisil cartridge. The fluvalinate was eluted with diethyl ether-n-hexane (1 + 1) and directly determined by GC-ECD. Recoveries from wax samples spiked at 5 fortification levels (100-1500 microg/kg) ranged from 77.4 to 87.3%, with coefficients of variation of 5.12-8.31%. The overall recovery of the method was 81.4 +/- 3.2%, and the limit of determination was 100 microg/kg.     

气相色谱-氮化学发光检测法分析催化汽油中含氮化合物类型的分布

建立了催化汽油馏分中各种含氮化合物类型分布的气相色谱-氮化学发光检测分析方法,考察了各种色谱条件对含氮化合物分离的影响。采用化学预处理的方法浓缩了催化汽油中的含氮化合物,并结合气相色谱-质谱检测以及部分含氮化合物标准样品,对某催化汽油中的20多个含氮化合物进行了定性(或归类)。催化汽油中几种主要含氮化合物(苯胺、2-甲基苯胺、二甲基苯胺)含量测定值的相对标准偏差(RSD)均不大于2.5%。当信噪比(S/N)为3时,苯胺氮的检出限为1.0 mg/L。该方法可用于不同来源和不同加工工艺的汽油馏分中各种含氮化合物类型分布的研究。     

Determination of trichothecenes in cereals by gas chromatography with ion trap detection

Summary A method for determination of the trichothecene toxins, deoxynivalenol, 3α-acetyl-deoxynivalenol, nivalenol, T-2 toxin, HT-2 toxin and diacetoxyscirpenol in cereals (wheat, barley, oats, corn) is described. Extraction was performed according to Tanaka et al. (J. Chromatogr.328, 271 (1985)) [33], derivatization by trifluoroacylation with trifluoroacetic acid anhydride. For quantitation and confirmation a capillary gas chromatograph combined with a selective mass detector (ion trap) working in CI-mode with methanol as reagent gas was used. The quantitation limit for the complete method is 1–5 μg/kg, depending on the chemical characteristics of each toxin and cleanness of the extracts. Recoverics from spiked cereals were 78–89%.     

Determination of pesticide residues in peaches by using gas chromatography and mass spectrometric detection

ABSTRACT

A multi-residue method using selected ion monitoring mode GC-MSD has been developed for the quantitative analysis of 30 widely used pesticides in fresh peaches produced in Swat Malakand, Pakistan. The planned methodology involved a sample extraction procedure using liquid-liquid partition with acetonitrile followed by a clean-up step based on solid-phase extraction (SPE). Method validation was performed in accordance with European Union guidelines. The European Union criteria (recovery 70–120%, RSD <20%) were met for majority of pesticides. For most of the pesticides, signal-to-noise ratios were good and background-corrected mass spectra often contained sufficient diagnostic to enable identity and confirmation. The limits of quantification (LOQs) were in the range 0.01–1.0 mg/kg. The above method was successfully applied to the analysis of peach samples (n = 30) from the field. Pesticide concentration in real peach samples was compared with the maximum residue levels (MRLs). Pesticide residues were detected in 73% of the peach samples. Most frequent residues were metalaxyl, α-cypermethrin, azoxystrobin, dimethoate, tebuconazol, λ-cyhalothrin and spiromesifin in peach samples.     

气相色谱法测定溴己新血药浓度及药代动力学研究

 建立了人血浆中溴己新的气相色谱 电子捕获测定法 ,对溴己新胶囊在健康人体内的药代动力学进行了研究。色谱柱为 5 %SE 30 (2m× 3mmi.d .)硅烷化玻璃柱。 5 氯 2 氨基二苯甲酮为内标 ,血浆样品加入磷酸盐缓冲液 (pH 6 0 )后用正己烷 二氯甲烷 (体积比为 9∶1)提取。线性范围为 1 0 μg/L～ 5 0 0 μg/L ,r =0 9994。人血浆中最小检测质量浓度为 0 5 μg/L。方法重现性好 ,日内、日间RSD分别小于 4 5 6 %和 7 11% ,平均回收率 97 5 %。 8名健康志愿者口服 8mg溴己新胶囊后 ,其体内代谢过程符合一房室模型。