Sterically Shielded Heptamethine Cyanine Dyes for Bioconjugation and High Performance Near‐Infrared Fluorescence Imaging

The near‐infrared window of fluorescent heptamethine cyanine dyes greatly facilitates biological imaging because there is deep penetration of the light and negligible background fluorescence. However, dye instability, aggregation, and poor pharmacokinetics are current drawbacks that limit performance and the scope of possible applications. All these limitations are simultaneously overcome with a new molecular design strategy that produces a charge balanced and sterically shielded fluorochrome. The key design feature is a meso‐aryl group that simultaneously projects two shielding arms directly over each face of a linear heptamethine polyene. Cell and mouse imaging experiments compared a shielded heptamethine cyanine dye (and several peptide and antibody bioconjugates) to benchmark heptamethine dyes and found that the shielded systems possess an unsurpassed combination of photophysical, physiochemical, and biodistribution properties that greatly enhance bioimaging performance.     

Two‐Photon‐Induced Fluorescence in New π‐Expanded Diketopyrrolopyrroles

Structurally unique π‐expanded diketopyrrolopyrroles (EDPP) were designed and synthesized. Strategic placement of a fluorene scaffold at the periphery of a diketopyrrolopyrrole through tandem Friedel–Crafts‐dehydration reactions resulted in dyes with supreme solubility. The structure of the dyes was confirmed by X‐ray crystallography verifying a nearly flattened arrangement of the ten fused rings. Despite the extended ring system, the dye still preserved good solubility and was further functionalized by using Pd‐catalyzed coupling reactions, such as the Buchwald–Hartwig amination. Photophysical studies of these new functional dyes revealed that they possess enhanced properties when compared with expanded DPPs in terms of two‐photon absorption cross‐section. It is further demonstrated that in addition to the initial diacetals, the final electrophilic cyclization step can also be applied to diketones. By placing two amine groups at peripheral positions of the resulting dyes, values of two‐photon absorption cross‐section on the level of 2000 GM around 1000 nm were achieved, which in combination with high fluorescence quantum yield (Φ_fl), generated a two‐photon brightness of approximately 1600 GM. These characteristics in combination with strong red emission (665 nm) make these new π‐expanded diketopyrrolopyrroles of major promise as two‐photon dyes for bioimaging applications. Finally, the corresponding N‐alkylated DPPs displayed a solid‐state fluorescence.     

Multilayer Microcapsules for FRET Analysis and Two‐Photon‐Activated Photodynamic Therapy

Microcapsules obtained by layer‐by‐layer assembly provide a good platform for biological analysis owing to their component diversity, multiple binding sites, and controllable wall thickness. Herein, different assembly species were obtained from two‐photon dyes and traditional photosensitizers, and further assembled into microcapsules. Fluorescence resonance energy transfer (FRET) was shown to occur between the two‐photon dyes and photosensitizers. Confocal laser scanning microscopy (CLSM) with one‐ and two‐photon lasers, fluorescence lifetime imaging microscopy (FLIM), and time‐resolved fluorescence spectroscopy were used to analyze the FRET effects in the microcapsules. The FRET efficiency could easily be controlled through changing the assembly sequence. Furthermore, the capsules are phototoxic upon one‐ or two‐photon excitation. These materials are thus expected to be applicable in two‐photon‐activated photodynamic therapy for deep‐tissue treatment.     

Diketopyrrolopyrrole‐Porphyrin Conjugates with High Two‐Photon Absorption and Singlet Oxygen Generation for Two‐Photon Photodynamic Therapy

Two‐photon photodynamic therapy is a promising therapeutic method which requires the development of sensitizers with efficient two‐photon absorption and singlet‐oxygen generation. Reported here are two new diketopyrrolopyrrole‐porphyrin conjugates as robust two‐photon absorbing dyes with high two‐photon absorption cross‐sections within the therapeutic window. Furthermore, for the first time the singlet‐oxygen generation efficiency of diketopyrrolopyrrole‐containing systems is investigated. A preliminary study on cell culture showed efficient two‐photon induced phototoxicity.     

Sterically Shielded Heptamethine Cyanine Dyes for Bioconjugation and High Performance Near-Infrared Fluorescence Imaging

The near-infrared window of fluorescent heptamethine cyanine dyes greatly facilitates biological imaging because there is deep penetration of the light and negligible background fluorescence. However, dye instability, aggregation, and poor pharmacokinetics are current drawbacks that limit performance and the scope of possible applications. All these limitations are simultaneously overcome with a new molecular design strategy that produces a charge balanced and sterically shielded fluorochrome. The key design feature is a meso-aryl group that simultaneously projects two shielding arms directly over each face of a linear heptamethine polyene. Cell and mouse imaging experiments compared a shielded heptamethine cyanine dye (and several peptide and antibody bioconjugates) to benchmark heptamethine dyes and found that the shielded systems possess an unsurpassed combination of photophysical, physiochemical, and biodistribution properties that greatly enhance bioimaging performance.     

Keto‐benzo[h]‐Coumarin‐Based Near‐Infrared Dyes with Large Stokes Shifts for Bioimaging Applications

Fluorescence imaging is a promising tool for the visualization of biomolecules in living systems and there is great demand for new fluorescent dyes that absorb and emit in the near‐infrared (NIR) region. Herein, we constructed three new fluorescent dyes ( NBC dyes) based on keto‐benzo[h]coumarin ( k‐BC ) and benzopyrilium salts. These dyes showed large Stokes shifts (>100 nm) and NIR emission (>800 nm). The relationship between the structures and optical properties of these dyes was further investigated by using density functional theory calculations at the B3LYP/6‐3G level of theory. Fluorescence images indicated that the fabricated dyes exhibited good photostability and low cytotoxicity and, thus, have potential applications as imaging agents in living cells and animals.     

Molecular Encapsulation of Fluorescent Dyes Affords Efficient Narrow‐band Dye Laser Operation in Water

A water‐based narrow‐band high‐efficiency dye laser was designed by means of a supramolecular host–guest chemical approach. The lasing characteristics of rhodamine B and sulforhodamine B (Kiton Red S) dyes in aqueous solution with the macrocyclic host cucurbit[7]uril (CB7) as additive were investigated in a narrow‐band dye laser setup. Significant improvements in both photostability and thermo‐optical properties of the aqueous CB7‐complexed dye systems were observed as compared to the uncomplexed dyes in ethanol solution. The tuning curves for the new dye–CB7–water systems were constructed by measuring the laser output at different wavelengths, which showed similar peak efficiencies and red‐shifted gains compared to the ethanolic solutions of the dyes, while dye laser operation revealed comparable pump threshold energies and slope efficiencies. The combined results render the dye–CB7–water system an attractive active medium for high‐repetition rate dye laser operation.     

Enhanced Charge Separation Efficiency in Pyridine‐Anchored Phthalocyanine‐Sensitized Solar Cells by Linker Elongation

A series of zinc phthalocyanine sensitizers ( PcS22 – 24 ) having a pyridine anchoring group are designed and synthesized to investigate the structural dependence on performance in dye‐sensitized solar cells. The pyridine‐anchor zinc phthalocyanine sensitizer PcS23 shows 79 % incident‐photon to current‐conversion efficiency (IPCE) and 6.1 % energy conversion efficiency, which are comparable with similar phthalocyanine dyes having a carboxylic acid anchoring group. Based on DFT calculations, the high IPCE is attributed with the mixture of an excited‐state molecular orbital of the sensitizer and the orbitals of TiO₂. Between pyridine and carboxylic acid anchor dyes, opposite trends are observed in the linker‐length dependence of the IPCE. The red‐absorbing PcS23 is applied for co‐sensitization with a carboxyl‐anchor organic dye D131 that has a complementary spectral response. The site‐selective adsorption of PcS23 and D131 on the TiO₂ surface results in a panchromatic photocurrent response for the whole visible‐light region of sun light.     

Synthesis and Characterization of Organic Dyes with Various Electron‐Accepting Substituents for p‐Type Dye‐Sensitized Solar Cells

Four new donor‐π‐acceptor dyes differing in their acceptor group have been synthesized and employed as model systems to study the influence of the acceptor groups on the photophysical properties and in NiO‐based p‐type dye‐sensitized solar cells. UV/Vis absorption spectra showed a broad range of absorption coverage with maxima between 331 and 653 nm. Redox potentials as well as HOMO and LUMO energies of the dyes were determined from cyclic voltammetry measurements and evaluated concerning their potential use as sensitizers in p‐type dye‐sensitized solar cells (p‐DSCs). Quantum‐chemical density functional theory calculations gave further insight into the frontier orbital distributions, which are relevant for the electronic processes in p‐DSCs. In p‐DSCs using an iodide/triiodide‐based electrolyte, the polycyclic 9,10‐dicyano‐acenaphtho[1,2‐b]quinoxaline (DCANQ) acceptor‐containing dye gave the highest power conversion efficiency of 0.08 %, which is comparable to that obtained with the perylenemonoimide (PMI)‐containing dye. Interestingly, devices containing the DCANQ‐based dye achieve a higher V_OC of 163 mV compared to 158 mV for the PMI‐containing dye. The result was further confirmed by impedance spectroscopic analysis showing higher recombination resistance and thus a lower recombination rate for devices containing the DCANQ dye than for PMI dye‐based devices. However, the use of the strong electron‐accepting tricyanofurane (TCF) group played a negative role in the device performance, yielding an efficiency of only 0.01 % due to a low‐lying LUMO energy level, thus resulting in an insufficient driving force for efficient dye regeneration. The results demonstrate that a careful molecular design with a proper choice of the acceptor unit is essential for development of sensitizers for p‐DSCs.     

New Bithiazole‐Based Sensitizers for Efficient and Stable Dye‐Sensitized Solar Cells

A series of new push–pull organic dyes ( BT‐I – VI ), incorporating electron‐withdrawing bithiazole with a thiophene, furan, benzene, or cyano moiety, as π spacer have been synthesized, characterized, and used as the sensitizers for dye‐sensitized solar cells (DSSCs). In comparison with the model compound T1 , these dyes containing a thiophene moiety between triphenylamine and bithiazole display enhanced spectral responses in the red portion of the solar spectrum. Electrochemical measurement data indicate that the HOMO and LUMO energy levels can be tuned by introducing different π spacers between the bithiazole moiety and cyanoacrylic acid acceptor. The incorporation of bithiazole substituted with two hexyl groups is highly beneficial to prevent close π–π aggregation, thus favorably suppressing charge recombination and intermolecular interaction. The overall conversion efficiencies of DSSCs based on bithiazole dyes are in the range of 3.58 to 7.51 %, in which BT‐I ‐based DSSCs showed the best photovoltaic performance: a maximum monochromatic incident photon‐to‐current conversion efficiency (IPCE) of 81.1 %, a short‐circuit photocurrent density (J_sc) of 15.69 mA cm^?2, an open‐circuit photovoltage (V_oc) of 778 mV, and a fill factor (ff) of 0.61, which correspond to an overall conversion efficiency of 7.51 % under standard global AM 1.5 solar light conditions. Most importantly, long‐term stability of the BT‐I – III ‐based DSSCs with ionic‐liquid electrolytes under 1000 h of light soaking was demonstrated and BT‐II with a furan moiety exhibited better photovoltaic performance of up to 5.75 % power conversion efficiency.     

Boron Difluoride Curcuminoid Fluorophores with Enhanced Two‐Photon Excited Fluorescence Emission and Versatile Living‐Cell Imaging Properties

The synthesis of boron difluoride complexes of a series of curcuminoid derivatives containing various donor end groups is described. Time‐dependent (TD)‐DFT calculations confirm the charge‐transfer character of the second lowest‐energy transition band and ascribe the lowest energy band to a “cyanine‐like” transition. Photophysical studies reveal that tuning the donor strength of the end groups allows covering a broad spectral range, from the visible to the NIR region, of the UV–visible absorption and fluorescence spectra. Two‐photon‐excited fluorescence and Z‐scan techniques prove that an increase in the donor strength or in the rigidity of the backbone results in a considerable increase in the two‐photon cross section, reaching 5000 GM, with predominant two‐photon absorption from the S₀–S₂ charge‐transfer transition. Direct comparisons with the hemicurcuminoid derivatives show that the two‐photon active band for the curcuminoid derivatives has the same intramolecular charge‐transfer character and therefore arises from a dipolar structure. Overall, this structure–relationship study allows the optimization of the two‐photon brightness (i.e., 400–900 GM) with one dye that emits in the NIR region of the spectrum. In addition, these dyes demonstrate high intracellular uptake efficiency in Cos7 cells with emission in the visible region, which is further improved by using porous silica nanoparticles as dye vehicles for the imaging of two mammalian carcinoma cells type based on NIR fluorescence emission.     

Assessment of Luminescent Downshifting Layers for the Improvement of Light‐Harvesting Efficiency in Dye‐Sensitized Solar Cells

Luminescence downshifting (LDS) of light can be a practical photon management technique to compensate the narrow absorption band of high‐extinction‐coefficient dyes in dye‐sensitized solar cells (DSSCs). Herein, an optical analysis on the loss mechanisms in a reflective LDS (R‐LDS)/DSSC configuration is reported. For squaraine dye (550–700 nm absorption band) and CaAlSiN₃:Eu²⁺ LDS material (550–700 nm emission band), the major loss channels are found to be non‐unity luminescence quantum efficiency (QE) and electrolyte absorption. By using an ideal LDS layer (QE=100 %), a less absorbing electrolyte (Co‐based), and antireflection coatings, approximately 20 % better light harvesting is obtained. If the absorption/emission band of dye/LDS is shifted to 800 nm, a maximal short‐circuit current density (J_sc) of 22.1 mA cm^?2 can be achieved. By putting the LDS layer in front of the DSSC (transmissive mode), more significant loss channels are observed, and hence a lower overall efficiency than the R‐LDS configuration.     

Click assembly of dye-functionalized octasilsesquioxanes for highly efficient and photostable photonic systems

New hybrid organic–inorganic dyes based on an azide‐functionalized cubic octasilsesquioxane (POSS) as the inorganic part and a 4,4‐difluoro‐4‐bora‐3a,4a‐diaza‐s‐indacene (BDP) chromophore as the organic component have been synthesized by copper(I)‐catalyzed 1,3‐dipolar cycloaddition of azides to alkynes. We have studied the effects of the linkage group of BDP to the POSS unit and the degree of functionalization of this inorganic core on the ensuing optical properties by comparison with model dyes. The high fluorescence of the BDP dye is preserved in spite of the linked chain at its meso position, even after attaching one BDP moiety to the POSS core. The laser action of the new dyes has been analyzed under transversal pumping at 532 nm in both the liquid phase and when incorporated into solid polymeric matrices. The monosubstituted new hybrid dye exhibits high lasing efficiency of up to 56 % with high photostability, with its laser output remaining at the initial value after 4×10⁵ pump pulses in the same position of the sample at a repetition rate of 30 Hz. However, functionalization of the POSS core with eight fluorophores leads to dye aggregation, as quantum mechanical simulation has revealed, worsening the optical properties and extinguishing the laser action. The new hybrid systems based on dye‐linked POSS nanoparticles open up the possibility of using these new photonic materials as alternative sources for optoelectronic devices, competing with dendronized or grafted polymers.     

Dipolar Dyes with a Pyrrolo[2,3‐b]quinoxaline Skeleton Containing a Cyano Group and a Bridged Tertiary Amino Group: Synthesis,Solvatofluorochromism, and Bioimaging

Two strongly polarized dipolar chromophores possessing a cyclic tertiary amino group at one terminus of the molecule and a CN group at the opposite terminus were designed and synthesized. Their rigid skeleton contains the rarely studied pyrrolo[2,3‐b]quinoxaline ring system. The photophysical properties of these regioisomeric dyes were different owing to differing π conjugation between the CN group and the electron‐donor moiety. These dipolar molecules showed very intense emission, strong solvatofluorochromism, and sufficient two‐photon brightness for bioimaging. One of these regioisomeric dyes, namely, 11‐carbonitrile‐2,3,4,5,6,7‐hexahydro‐1H‐3a,8,13,13b‐tetraazabenzo[b]cyclohepta[1,2,3‐jk]fluorene, was successfully utilized in two‐photon imaging of mouse organ tissues and showed distinct tissue morphology with high resolution.     

Energy Transfer in Dye‐Coupled Lanthanide‐Doped Nanoparticles: From Design to Application

Surface modification with organic dye molecules is a useful strategy to manipulate the optical properties of lanthanide‐doped nanoparticles (LnNPs). It enables energy transfer between dyes and LnNPs, which provides unprecedented possibilities to gain new optical phenomena from the dye–LnNPs composite systems. This has led to a wide range of emerging applications, such as biosensing, drug delivery, gene targeting, information storage, and photon energy conversion. Herein, the mechanism of energy transfer and the structural‐dependent energy‐transfer properties in dye‐coupled LnNPs are reviewed. The design strategies for achieving effective dye–LnNP functionalization are presented. Recent advances in these composite nanomaterials in biomedicine and energy conversion applications are highlighted.     

DNA Photocleavage by a Cationic BODIPY Dye through Both Singlet Oxygen and Hydroxyl Radical: New Insight into the Photodynamic Mechanism of BODIPYs

Two new NIR‐absorbing BODIPY dyes, each bearing two pyridinium groups, are synthesized and their DNA‐binding affinities and DNA photocleavage abilities examined in depth. While one BODIPY dye photocleaves DNA mainly through singlet oxygen, the other photocleaves DNA through both singlet oxygen and hydroxyl radical. To the best of our knowledge, this is the first example of a hydroxyl radical being involved in the photodynamic behavior of BODIPY‐type dyes. EPR experiments confirm the ability of these and several related BODIPYs to generate superoxide anion radical and hydroxyl radical. This finding may shed light on the mechanism of BODIPY‐based photodynamic therapy (PDT) and open a new avenue for development of more efficient BODIPY‐type PDT agents.     

Benzo[1,2‐d:4,5‐d′]bisimidazoles as a Convenient Platform Towards Dyes that are Capable of Excited‐State Intramolecular Proton Transfer and of Two‐Photon Absorption

New, strongly fluorescent benzo[1,2‐d:4,5‐d′]bisimidazoles have been prepared by the reaction of Bandrowski′s base with various aldehydes. Their structures were carefully designed to achieve efficient excited‐state intramolecular proton transfer and good two‐photon‐absorption (2PA) cross‐sections. Functional dyes that possessed both high fluorescence quantum yields and large Stokes shifts were prepared. A π‐expanded D‐A‐D derivative that possessed Φ_fl=50 % and σ₂=230 GM in the spectroscopic area of interest for biological imaging is an excellent candidate as a fluorescent probe. Thanks to the presence of two reactive amino groups, such compounds can be easily transformed into probes for bioconjugation. All of these benzo[1,2‐d:4,5‐d′]bisimidazoles were also strongly fluorescent in the solid state.     

Near‐Infrared Croconaine Rotaxanes and Doped Nanoparticles for Enhanced Aqueous Photothermal Heating

The photothermal effect is the generation of heat by molecules or particles upon high‐energy laser irradiation, and near‐infrared absorbers such as gold nanoparticles and organic dyes have a range of potential photothermal applications. The favourable photothermal properties of thiophene‐functionalised croconaine dyes were recently discovered. The synthesis and properties of novel croconaine rotaxane and pseudorotaxane architectures capable of efficient photothermal performance in both organic and aqueous environments are reported. The versatility of this dye‐encapsulation strategy was demonstrated by the preparation of two organic croconaine rotaxanes using different synthetic methods: the formation of an aqueous pseudorotaxane association complex, and the synthesis of water‐soluble, croconaine‐doped silicated micelle nanoparticles. All of these near‐infrared‐absorbing systems exhibit excellent photothermal behaviour, with pseudorotaxane and rotaxane formation vital for effective aqueous heat generation. Dye encapsulation provides steric protection to enhance the stability of a water‐sensitive croconaine dye, while rotaxane‐doped nanoparticles avoid detrimental band broadening caused by chromophore coupling.     

Laser welding of polymers using unsymmetrical squaraine dyes

Transmission laser welding of plastic is typically achieved by incorporating a laser absorbing dye into one of the two pieces of plastic one wishes to weld together and mediating the welding process using a laser emitting light at a suitable wavelength. Desirable properties of laser absorbing dyes include: (1) the dye is colorless in the visible region but absorbs strongly in the region at the wavelength where the laser emits, (2) the dye has a good conversion of the energy from the laser to heat, (3) the dye is stable enough to be incorporated into the molten plastic, (4) the dye is soluble in the plastic of choice to give an even distribution in the plastic, and (5) the dye is nontoxic. Here, we explore an alternative approach to achieve laser welding of colorless plastics using a laser dye that is colored, but that can be bleached after the welding process. Nonsymmetrical squaraine dyes were prepared by condensation of squaric acid and two equivalents of various 3,5-dimethoxy-N,N-dialkylanilines. After the incorporation into polyethylene and laser welding, the plastic was bleached either by heat treatment or by irradiation with a high pressure Xe-lamp giving colorless polyethylene. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2245–2254     

The Role of π Bridges in High‐Efficiency DSCs Based on Unsymmetrical Squaraines

A series of squaraine‐based sensitizers with various π bridges and anchors were prepared and examined in dye‐sensitized solar cells. The carboxylic anchor group was attached onto a squaraine dye through π bridges with and without an ethynyl spacer. DFT studies indicate that the LUMO is delocalized throughout the dyes, whilst the HOMO resides on the squaraine core. The dye that incorporates a 4,4‐di‐n‐hexyl‐cyclopentadithiophene group that is directly attached onto the π bridge, JD10 , exhibits the highest power conversion efficiency in a DSC; this result is attributed, in part, to the deaggregative properties that are associated with the gem‐di‐n‐hexyl substituents, which extend above and below the π‐conjugated dye plane. Dye JD10 demonstrates a power‐conversion efficiency of 7.3 % for liquid‐electrolyte dye‐sensitized solar cells and 7.9 % for cells that are co‐sensitized by another metal‐free dye, D35 , which substantially exceed the performance of any previously tested squaraine sensitizer. A panchromatic incident‐photon‐to‐current‐conversion efficiency curve is realized for this dye with an excellent short‐circuit current of 18.0 mA cm^?2. This current is higher than that seen for other squaraine dyes, partially owing to a high molar absorptivity of >5 000 M ^?1 cm^?1 from 400 nm to the long‐wavelength onset of 724 nm for dye JD10 .