Efficient Nondoped Pure Blue Organic Light‐Emitting Diodes Based on an Anthracene and 9,9‐Diphenyl‐9,10‐dihydroacridine Derivative

Organic light‐emitting diodes (OLEDs) have been greatly developed in recent years owing to their abundant advantages for full‐color displays and general‐purpose lightings. Blue emitters not only provide one of the primary colors of the RGB (red, green and blue) display system to reduce the power consumption of OLEDs, but are able able to generate light of all colors, including blue, green, red, and white by energy transfer processes in devices. However, it remains a challenge to achieve high‐performance blue electroluminescence, especially for nondoped devices. In this paper, we report a blue light emitting molecule, DPAC‐AnPCN, which consists of 9,9‐diphenyl‐9,10‐dihydroacridine and p‐benzonitrile substituted anthracene moieties. The asymmetrically decoration on anthracene with different groups on its 9 and 10 positions combines the merits of the respective constructing units and endows DPAC‐AnPCN with pure blue emission, high solid‐state efficiency, good thermal stability and appropriate HOMO and LUMO energy levels. Furthermore, DPAC‐AnPCN can be applied in a nondoped device to effectively reduce the fabrication complexity and cost. The nondoped device exhibits pure blue electroluminescence (EL) locating at 464 nm with CIE coordinates of (0.15, 0.15). Moreover, it maintains high efficiency at relatively high luminescence. The maximum external quantum efficiency (EQE) reaches 6.04 % and still remains 5.31 % at the luminance of 1000 cd m^?2 showing a very small efficiency roll‐off.     

Red/Near‐Infrared Thermally Activated Delayed Fluorescence OLEDs with Near 100 % Internal Quantum Efficiency

Developing red thermally activated delayed fluorescence (TADF) emitters, attainable for both high‐efficient red organic light‐emitting diodes (OLEDs) and non‐doped deep red/near‐infrared (NIR) OLEDs, is challenging. Now, two red emitters, BPPZ‐PXZ and mDPBPZ‐PXZ, with twisted donor–acceptor structures were designed and synthesized to study molecular design strategies of high‐efficiency red TADF emitters. BPPZ‐PXZ employs the strictest molecular restrictions to suppress energy loss and realizes red emission with a photoluminescence quantum yield (Φ_PL) of 100±0.8 % and external quantum efficiency (EQE) of 25.2 % in a doped OLED. Its non‐doped OLED has an EQE of 2.5 % owing to unavoidable intermolecular π–π interactions. mDPBPZ‐PXZ releases two pyridine substituents from its fused acceptor moiety. Although mDPBPZ‐PXZ realizes a lower EQE of 21.7 % in the doped OLED, its non‐doped device shows a superior EQE of 5.2 % with a deep red/NIR emission at peak of 680 nm.     

Highly Efficient Near‐Infrared Delayed Fluorescence Organic Light Emitting Diodes Using a Phenanthrene‐Based Charge‐Transfer Compound

Significant efforts have been made to develop high‐efficiency organic light‐emitting diodes (OLEDs) employing thermally activated delayed fluorescence (TADF) emitters with blue, green, yellow, and orange–red colors. However, efficient TADF materials with colors ranging from red, to deep‐red, to near‐infrared (NIR) have been rarely reported owing to the difficulty in molecular design. Herein, we report the first NIR TADF molecule TPA‐DCPP (TPA=triphenylamine; DCPP=2,3‐dicyanopyrazino phenanthrene) which has a small singlet–triplet splitting (ΔE_ST) of 0.13 eV. Its nondoped OLED device exhibits a maximum external quantum efficiency (EQE) of 2.1 % with a Commission International de L′Éclairage (CIE) coordinate of (0.70, 0.29). Moreover, an extremely high EQE of nearly 10 % with an emission band at λ=668 nm has been achieved in the doped device, which is comparable to the most‐efficient deep‐red/NIR phosphorescent OLEDs with similar electroluminescent spectra.     

Efficient Deep‐Blue Electroluminescence Based on Phenanthroimidazole‐Dibenzothiophene Derivatives with Different Oxidation States of the Sulfur Atom

Developing efficient deep‐blue materials is a long‐term research focus in the field of organic light‐emitting diodes (OLEDs). In this paper, we report two deep‐blue molecules, PITO and PISF, which share similar chemical structures but exhibit different photophysical and device properties. These two molecules consist of phenanthroimidazole and dibenzothiophene analogs. The distinction of their chemical structures lies in the different oxidation states of the S atom. For PITO, the S atom is oxidized and the resulting structure dibenzothiophene S,S‐dioxide becomes electron deficient. Therefore, PITO displays remarkable solvatochromism, implying a charge‐transfer (CT) excited state formed between the donor (D) phenanthroimidazole and acceptor (A) dibenzothiophene S,S‐dioxide. For PISF, it is constituted of phenanthroimidazole and dibenzothiophene in which the S atom is not oxidized. PISF displays locally excited (LE) emission with little solvatochromism. Compared with PISF, the D–A molecule PITO with an electron‐deficient group shows a much lower LUMO energy level, which is in favor of electron injection in device. In addition, PITO exhibits more balanced carrier transport. However, PISF is capable of emitting in the shorter wavelength region, which is beneficial to obtain better color purity. The doped electroluminescence (EL) device of the D–A molecule PITO manifests deep‐blue emission with CIE coordinates of (0.15, 0.08) and maximum external quantum efficiency (EQE) of 4.67 %. The doped EL device of the LE molecule PISF, however, reveals an even bluer emission with CIE coordinates of (0.15, 0.06) and a maximum EQE of 4.08 %.     

Intermolecular Charge‐Transfer Transition Emitter Showing Thermally Activated Delayed Fluorescence for Efficient Non‐Doped OLEDs

A novel molecular model of connecting electron‐donating (D) and electron‐withdrawing (A) moieties via a space‐enough and conjugation‐forbidden linkage (D‐Spacer‐A) is proposed to develop efficient non‐doped thermally activated delayed fluorescence (TADF) emitters. 10‐(4‐(4‐(4,6‐diphenyl‐1,3,5‐triazin‐2‐yl) phenoxy) phenyl)‐9,9‐dimethyl‐9,10‐dihydroacridine (DMAC‐o‐TRZ) was designed and synthesized accordingly. As expected, it exhibits local excited properties in single‐molecule state as D‐Spacer‐A molecular backbone strongly suppress the intramolecular charge‐transfer (CT) transition. And intermolecular CT transition acted as the vital radiation channel for neat DMAC‐o‐TRZ film. As in return, the non‐doped device exhibits a remarkable maximum external quantum efficiency (EQE) of 14.7 %. These results prove the feasibility of D‐Spacer‐A molecules to develop intermolecular CT transition TADF emitters for efficient non‐doped OLEDs.     

Tri‐Spiral Donor for High Efficiency and Versatile Blue Thermally Activated Delayed Fluorescence Materials

Blue thermally activated delayed fluorescence (TADF) emitters that can simultaneously achieve high efficiency in doped and nondoped organic light‐emitting diodes (OLEDs) are rarely reported. Reported here is a strategy using a tri‐spiral donor for such versatile blue TADF emitters. Impressively, by simply extending the nonconjugated fragment and molecular length, aggregation‐caused emission quenching (ACQ) can be greatly alleviated to achieve as high as a 90 % horizontal orientation dipole ratio and external quantum efficiencies (EQEs) of up to 33.3 % in doped and 20.0 % in nondoped sky‐blue TADF‐OLEDs. More fascinatingly, a high‐efficiency purely organic white OLED with an outstanding EQE of up to 22.8 % was also achieved by employing TspiroS‐TRZ as a blue emitter and an assistant host. This compound is the first blue TADF emitter that can simultaneously achieve high electroluminescence (EL) efficiency in doped, nondoped sky‐blue, and white TADF‐OLEDs.     

Saturated Red‐Light‐Emitting Gold(III) Triphenylamine Dendrimers for Solution‐Processable Organic Light‐Emitting Devices

A novel isoquinoline‐containing C^N^C ligand and its phosphorescent triphenylamine‐based alkynylgold(III) dendrimers have been synthesized. These alkynylgold(III) dendrimers serve as phosphorescent dopants in the fabrication of efficient solution‐processable organic light‐emitting devices (OLEDs). The photophysical, electrochemical, and electroluminescence properties were studied. A saturated red emission with CIE coordinates of (0.64, 0.36) and a high EQE value of 3.62 % were achieved. Unlike other red‐light‐emitting iridium(III) dendrimers, a low turn‐on voltage of less than 3 V and a reduced efficiency roll‐off at high current densities were observed; this can be accounted for by the enhanced carrier transporting ability and the relatively short lifetimes in the high‐generation dendrimers. This class of alkynylgold(III) dendrimers are promising candidates as phosphorescent dopants in the fabrication of solution‐processable OLEDs.     

Combining Charge‐Transfer Pathways to Achieve Unique Thermally Activated Delayed Fluorescence Emitters for High‐Performance Solution‐Processed,Non‐doped Blue OLEDs

Two efficient blue thermally activated delayed fluorescence compounds, B‐oCz and B‐oTC , composed of ortho‐donor (D)–acceptor (A) arrangement were designed and synthesized. The significant intramolecular D–A interactions induce a combined charge transfer pathway and thus achieve small ΔE _ST and high efficiencies. The concentration quenching can be effectively inhibited in films of these compounds. The blue non‐doped organic light emitting diodes (OLEDs) based on B‐oTC prepared from solution processes shows record‐high external quantum efficiency (EQE) of 19.1 %.     

Combining Charge‐Transfer Pathways to Achieve Unique Thermally Activated Delayed Fluorescence Emitters for High‐Performance Solution‐Processed,Non‐doped Blue OLEDs

Two efficient blue thermally activated delayed fluorescence compounds, B‐oCz and B‐oTC , composed of ortho‐donor (D)–acceptor (A) arrangement were designed and synthesized. The significant intramolecular D–A interactions induce a combined charge transfer pathway and thus achieve small ΔE _ST and high efficiencies. The concentration quenching can be effectively inhibited in films of these compounds. The blue non‐doped organic light emitting diodes (OLEDs) based on B‐oTC prepared from solution processes shows record‐high external quantum efficiency (EQE) of 19.1 %.     

High Power Efficiency Blue‐to‐Green Organic Light‐Emitting Diodes Using Isonicotinonitrile‐Based Fluorescent Emitters

Herein, 9,10‐dihydro‐9,9‐dimethylacridine (Ac) or phenoxazine (PXZ)‐substituted isonicotinonitrile (INN) derivatives, denoted as 2AcINN , 26AcINN , and 26PXZINN , were developed as a series of thermally activated delayed fluorescence (TADF) emitters. These emitters showed reasonably high photoluminescence quantum yields of 71–79 % in the host films and high power efficiency organic light‐emitting diodes (OLEDs). Sky‐blue emitter 26AcINN exhibited a low turn‐on voltage of 2.9 V, a high external quantum efficiency (η _ext) of 22 %, and a high power efficiency (η _p) of 66 lm W⁻¹ with Commission Internationale de l′Eclairage (CIE) chromaticity coordinates of (0.22, 0.45), whereas green emitter 26PXZINN exhibited a low turn‐on voltage of 2.2 V, a high η _ext of 22 %, and a high η _p of 99 lm W⁻¹ with CIE chromaticity coordinates of (0.37, 0.58). These performances are among the best for TADF OLEDs to date.     

Highly Efficient Blue Thermally Activated Delayed Fluorescence Emitters Based on Multi-Donor Modified Oxygen-Bridged Boron Acceptor

The employment of thermally activated delayed fluorescence (TADF) emitters is one of the most promising ways to realize the external quantum efficiency (EQE) of over 25% for organic light-emitting diodes (OLEDs). In addition, the TADF emitter based on oxygen-bridged boron (BO) fragment can maintain blue emission with high color purity. Herein, we constructed two blue TADF emitters, 3TBO and 5TBO, for OLEDs application. Both emitters consist of three donors linked at the oxygen-bridged boron acceptor. OLED devices based on 3TBO and 5TBO exhibited both high excellent device efficiency and high color purity with a maximum EQE; full-width at half-maximum (FWHM); and CIE coordinates of 17.3%, 47 nm, (0.120, 0.294), and 26.2%, 57 nm, (0.125, 0.275), respectively.     

Twisted penta‐Carbazole/Benzophenone Hybrid Compound as Multifunctional Organic Host,Dopant or Non‐doped Emitter for Highly Efficient Solution‐Processed Delayed Fluorescence OLEDs

A new multi‐functional penta‐carbazole/benzophenone hybrid compound 5CzBP was designed and synthesized through a simple one‐step catalyst‐free C—N coupling reaction by using 2,3,4,5,6‐pentafluorobenzophenone and carbazole as starting materials. 5CzBP is very soluble in tetrahydrofuran (THF), which brings an environmentally friendly device fabrication for solution‐processed OLEDs instead of most widely used chlorinated solvents when 5CzBP is employed as the bulk‐phase of organic host or non‐doped emitter in the emissive layer. 5CzBP exhibits thermally activated delayed fluorescence (TADF) characteristic with relatively high triplet energy of 2.60 eV and a low ΔE_ST of 0.01 eV. By using the new TADF material as organic host for another green TADF emitter, maximum external quantum efficiency (EQE) of 12.5% has been achieved in simple solution‐processed OLED device. Besides, a maximum EQE of 8.9% and 5.7% was further obtained in TADF devices based on 5CzBP as dopant and non‐doped emitter, respectively. The simultaneously acting as efficient TADF host and non‐doped TADF emitter provides the potential guidance of the future simple single‐layer two‐color white OLEDs based on low‐cost pure organic TADF materials.     

High‐Performance Blue OLEDs Based on Phenanthroimidazole Emitters via Substitutions at the C6‐ and C9‐Positions for Improving Exciton Utilization

Donor–acceptor (D–A) molecular architecture has been shown to be an effective strategy for obtaining high‐performance electroluminescent materials. In this work, two D–A molecules, Ph‐BPA‐BPI and Py‐BPA‐BPI, have been synthesized by attaching highly fluorescent phenanthrene or pyrene groups to the C6‐ and C9‐positions of a locally excited‐state emitting phenylamine–phenanthroimidazole moiety. Equipped with good physical and hybridized local and charge‐transfer properties, both molecules show high performances as blue emitters in nondoped organic light‐emitting devices (OLEDs). An OLED using Ph‐BPA‐BPI as the emitting layer exhibits deep‐blue emission with CIE coordinates of (0.15, 0.08), and a maximum external quantum efficiency (EQE), current efficiency (CE), and power efficiency (PE) of 4.56 %, 3.60 cd A^?1, and 3.66 lm W^?1, respectively. On the other hand, a Py‐BPA‐BPI‐based, sky‐blue OLED delivers the best results among nondoped OLEDs with CIE_y values of < 0.3 reported so far, for which a very low turn‐on voltage of 2.15 V, CIE coordinates of (0.17, 0.29), and maximum CE, PE, and EQE values of 10.9 cd A^?1, 10.5 lm W^?1, and 5.64 %, were achieved, respectively. More importantly, both devices show little or even no efficiency roll‐off and high singlet exciton‐utilizing efficiencies of 36.2 % for Ph‐BPA‐BPI and 39.2 % for Py‐BPA‐BPI.     

Nondoped Deep‐Blue Organic Light‐Emitting Diodes with Color Stability and Very Low Efficiency Roll‐Off: Solution‐Processable Small‐Molecule Fluorophores by Phosphine Oxide Linkage

A series of solution‐processable small molecules PO1 – PO4 were designed and synthesized by linking N‐phenylnaphthalen‐1‐amine groups to a phenyl phosphine oxide core through a π‐conjugated bridge, and their thermal, photophysical, and electrochemical properties were investigated. The phosphine oxide linkage can disrupt the conjugation and allows the molecular system to be extended to enable solution processability and high glass transition temperatures (159–181 °C) while preserving the deep‐blue emission. The noncoplanar molecular structures resulting from the trigonal‐pyramidal configuration of the phosphine oxide can suppress intermolecular interactions, and thus these compounds exhibit strong deep‐blue emission both in solution and the solid state with high photoluminescent quantum yield (PLQY) of 0.88–0.99 in dilute toluene solution. Solution‐processed nondoped organic light‐emitting diodes featuring PO4 as emitter achieve a maximum current efficiency of 2.36 cd A^?1 with CIE coordinates of (0.15, 0.11) that are very close to the NTSC blue standard. Noticeably, all devices based on these small‐molecular fluorescent emitters show striking deep‐blue electroluminescent color stability and extremely low efficiency roll‐off.     

Carbazole Dendrimers as Solution‐Processable Thermally Activated Delayed‐Fluorescence Materials

Recently, thermally activated delayed fluorescence (TADF) materials have received increasing attention as effective emitters for organic light‐emitting diodes (OLEDs). However, most of them are usually employed as dopants in a host material. In this report, carbazole dendrimers with a triphenyl‐s‐triazine core are reported, which are the first solution‐processable, non‐doped, high‐molecular‐weight TADF materials. The dendrimers were obtained by a new and facile synthetic route using the tert‐butyldimethylsilyl moiety as a protecting group. All dendrimers showed TADF in toluene. Measurements of the temperature‐dependent luminescence lifetime revealed that spin‐coated neat films also showed TADF with moderate quantum yields. OLED devices incorporating these dendrimers as spin‐coated emitting layers gave external quantum efficiencies of up to a 3.4 %, which suggests that this device is harvesting triplet excitons. This result indicates that carbazole dendrimers with attached acceptors are potential TADF materials owing to their polarized electronic structure (with HOMO–LUMO separation).     

Adamantane‐Substituted Acridine Donor for Blue Dual Fluorescence and Efficient Organic Light‐Emitting Diodes

To date, blue dual fluorescence emission (DFE) has not been realized because of the limited choice of chemical moieties and severe geometric deformation of the DFE emitters leading to strong intramolecular charge transfer (ICT) with a large Stokes shift in excited states. Herein, an emitter (1′r,5′R,7′S)‐10‐(4‐(4,6‐diphenyl‐1,3,5‐triazin‐2‐yl)phenyl)‐10H‐spiro [acridine‐9,2′‐adamantane] (a‐DMAc‐TRZ) containing a novel adamantane‐substituted acridine donor is reported, which exhibits unusual blue DFE. The introduction of the rigid and bulky adamantane moiety not only suppressed the geometry relaxation in excited state, but also induced the formation of quasi‐axial conformer (QAC) and quasi‐equatorial conformer (QEC) geometries, leading to deep‐blue conventional fluorescence and sky‐blue thermally activated delayed fluorescence (TADF). The resulting organic light‐emitting diodes (OLEDs) achieved a maximum external quantum efficiency (EQE) of about 29 %, which is the highest reported for OLEDs based on dual‐conformation emitters.     

Solution‐Processed,Undoped, Deep‐Blue Organic Light‐Emitting Diodes Based on Starburst Oligofluorenes with a Planar Triphenylamine Core

A series of starburst oligomers (T1–T3) that contained a fully diarylmethene‐bridged triphenylamine core and oligofluorene arms were designed and synthesized through Suzuki cross‐coupling reactions. Their thermal, photophysical, and electrochemical properties were also investigated. These materials showed high glass transition, in the range of 123–129 °C, and good film‐forming abilities. They displayed deep‐blue emission both in solution and as thin films. Solution‐processed devices based on these oligomers exhibited highly efficient deep‐blue electroluminescence and the device performances were significantly enhanced with the extension of the oligofluorene arms. The double‐layered device that contained T3 as an emitter showed a maximum current efficiency of 3.83 cd A^?1 and a maximum external quantum efficiency of 4.19 % with CIE coordinates of (0.16, 0.09), which are among the highest values for undoped deep‐blue OLEDs that are based on solution‐processable starburst oligomers.     

Precise Regulation of Emission Maxima and Construction of Highly Efficient Electroluminescent Materials with High Color Purity

Advanced multiple resonance induced thermally activated delayed fluorescence (MR-TADF) emitters have emerged as a privileged motif for applications in organic light-emitting diodes (OLEDs), because they furnish highly tunable TADF characteristics and high color purity emission. Herein, based on the unique nitrogen-atom embedding molecular engineering (NEME) strategy, a series of compounds BN-TP-Nx (x=1, 2, 3, 4) have been customized. The nitrogen-atom anchored at different position of triphenylene hexagonal lattice entails varying degrees of perturbation to the electronic structure. The newly-constructed emitters have demonstrated the precise regulation of emission maxima of MR-TADF emitters to meet the actual industrial demand, and further enormously enriched the MR-TADF molecular reservoir. The BN-TP-N3-based OLED exhibits ultrapure green emission, with peak of 524 nm, full-width at half-maximum (FWHM) of 33 nm, Commission Internationale de L'Eclairage (CIE) coordinates of (0.23, 0.71), and maximum external quantum efficiency (EQE) of 37.3 %.     

Efficient Non‐doped Blue Fluorescent Organic Light‐Emitting Diodes Based on Anthracene–Triphenylethylene Derivatives

The development of efficient blue materials has been a continuous research topic in the field of organic light‐emitting diodes (OLEDs). In this paper, three aggregation‐induced emission enhancement active blue emitters, PIAnTPE, TPAAnTPE and CzAnTPE, are successfully synthesized by attaching a triphenylethylene unit and phenanthroimidazole/triphenylamine/carbazole moieties to the 9,10‐positions of anthracene, respectively. The three compounds exhibit good thermal stabilities, appropriate for the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO) energy levels and display high photoluminescence quantum yields (PLQYs) of 65, 70 and 46 % in the solid state. Non‐doped blue devices using PIAnTPE, TPAAnTPE and CzAnTPE as the emitting layers show good electroluminescent performances, with the maximum external quantum efficiencies (EQEs) of 4.46, 4.13 and 4.04 %, respectively. More importantly, EQEs of all the three devices can be still retained when the luminescence reaches 1000 cd m^?2, exhibiting quite small efficiency roll‐offs in the non‐doped OLEDs.     

Constructing a Novel Dendron for a Self‐Host Blue Emitter with Thermally Activated Delayed Fluorescence: Solution‐Processed Nondoped Organic Light‐Emitting Diodes with Bipolar Charge Transfer and Stable Color Purity

Self‐host thermally activated delayed fluorescence (TADF) materials have recently been identified as effective emitters for solution‐processed nondoped organic light‐emitting diodes (OLEDs). However, except for the carbazole unit, few novel dendrons have been developed to build self‐host TADF emitters. This study reports two self‐host blue materials, tbCz‐SO and poCz‐SO, with the same TADF emissive core and different dendrons. The influence of the peripheral dendrons on the photophysical properties and electroluminescent performances of the self‐host materials were systematically investigated. The transient fluorescence and electroluminescence spectra indicated that the diphenylphosphoryl carbazole units could effectively encapsulate the emissive core to reduce the concentration quenching effect and to enhance reverse intersystem crossing. By using tbCz‐SO and poCz‐SO as host‐free blue emitters, the performance of the solution‐processed nondoped OLED device demonstrated that a more balanced charge transfer from the bipolar dendrons would offer a better current efficiency of 10.5 cd A⁻¹ and stable color purity with Commission Internationale de L'Eclairage units of (0.18, 0.27).