Water‐Regulated Self‐Assembly Structure Transformation and Gelation Behavior Prediction Based on a Hydrazide Derivative

Herein, we report the water‐regulated supramolecular self‐assembly structure transformation and the predictability of the gelation ability based on an azobenzene derivative bearing a hydrazide group, namely, N‐(3,4,5‐tributoxyphenyl)‐N′‐4‐[(4‐hydroxyphenyl)azophenyl] benzohydrazide (BNB‐t4). The regulation effects are demonstrated in the morphological transformation from spherical to lamellar particles then back to spherical in different solvent ratios of n‐propanol/water. The self‐assembly behavior of BNB‐t4 was characterized by minimum gelation concentration, microstructure, thermal, and mechanical stabilities. From the spectroscopy studies, it is suggested that gel formation of BNB‐t4 is mainly driven by intermolecular hydrogen bonding, accompanied with the contribution from π–π stacking as well as hydrophobic interactions. The successfully established correlation between the self‐assembly behavior and solubility parameters yields a facile way to predict the gelation performance of other molecules in other single or mixed solvents.     

Construction of Alkynylplatinum(II) Bzimpy‐Functionalized Metallacycles and Their Hierarchical Self‐Assembly Behavior in Solution Promoted by Pt⋅⋅⋅Pt and π–π Interactions

A family of new alkynylplatinum(II) 2,6‐bis(benzimidazol‐2′‐yl)pyridine (bzimpy)‐functionalized supramolecular metallacycles with different shapes and sizes have been successfully prepared by coordination‐driven self‐assembly. The obtained metallacycles showed switchable emission and a strong tendency to form intermolecular Pt???Pt and π–π stacking interactions in solution that were not displayed by their individual precursors. Further investigation revealed that the existence of the metallacyclic scaffold at the core could facilitate the formation of intermolecular Pt???Pt and π–π stacking interactions of peripheral alkynylplatinum(II) bzimpy units. Moreover, the shapes and sizes of the metallacyclic scaffold have a significant influence on the hierarchical self‐assembly behavior. Among the three metallacycles, hexagonal metallacycle A , with a relatively small size, could spontaneously self‐assemble into an aromatic guest stimuli‐responsive metallogel at room temperature without a heating–cooling process.     

Emergent Catalytic Behavior of Self‐Assembled Low Molecular Weight Peptide‐Based Aggregates and Hydrogels

We report a series of short peptides possessing the sequence (FE)_n or (EF)_n and bearing l ‐proline at their N‐terminus that self‐assemble into high aspect ratio aggregates and hydrogels. We show that these aggregates are able to catalyze the aldol reaction, whereas non‐aggregated analogues are catalytically inactive. We have undertaken an analysis of the results, considering the accessibility of catalytic sites, pK_a value shifts, and the presence of hydrophobic pockets. We conclude that the presence of hydrophobic regions is indeed relevant for substrate solubilization, but that the active site accessibility is the key factor for the observed differences in reaction rates. The results presented here provide an example of the emergence of a new chemical property caused by self‐assembly, and support the relevant role played by self‐assembled peptides in prebiotic scenarios. In this sense, the reported systems can be seen as primitive aldolase I mimics, and have been successfully tested for the synthesis of simple carbohydrate precursors.     

Synthesis and Applications of (ONO Pincer)Ruthenium‐Complex‐Bound Norvalines

Two (ONO pincer)ruthenium‐complex‐bound norvalines, Boc?[Ru(pydc)(terpy)]Nva?OMe ( 1 ; Boc=tert‐butyloxycarbonyl, terpy=terpyridyl, Nva=norvaline) and Boc?[Ru(pydc)(tBu‐terpy)]Nva?OMe ( 5 ), were successfully synthesized and their molecular structures and absolute configurations were unequivocally determined by single‐crystal X‐ray diffraction. The robustness of the pincer Ru complexes and norvaline scaffolds against acidic/basic, oxidizing, and high‐temperature conditions enabled us to perform selective transformations of the N‐Boc and C?OMe termini into various functional groups, such as alkyl amide, alkyl urea, and polyether groups, without the loss of the Ru center or enantiomeric purity. The resulting dialkylated Ru‐bound norvaline, n‐C₁₁H₂₃CO?l ‐[Ru(pydc)(terpy)]Nva?NH‐n‐C₁₁H₂₃ (l ‐ 4 ) was found to have excellent self‐assembly properties in organic solvents, thereby affording the corresponding supramolecular gels. Ru‐bound norvaline l ‐ 1 exhibited a higher catalytic activity for the oxidation of alcohols by H₂O₂ than parent complex [Ru(pydc)(terpy)] ( 11 a ).     

An Easy Access to Organic Salt‐Based Stimuli‐Responsive and Multifunctional Supramolecular Hydrogels

By exploiting orthogonal hydrogen bonding involving supramolecular synthons and hydrophobic/hydrophilic interactions, a new series of simple organic salt based hydrogelators derived from pyrene butyric acid and its β‐alanine amide derivative, and various primary amines has been achieved. The hydrogels were characterised by microscopy, table‐top rheology and dynamic rheology. FTIR, variable‐temperature ¹H NMR and emission spectroscopy established the role of various supramolecular interactions such as hydrogen bonding and π–π stacking in hydrogelation. Single‐crystal X‐ray diffraction (SXRD) studies supported the conclusion that orthogonal hydrogen bonding involving amide–amide and primary ammonium monocarboxylate (PAM) synthons indeed played a crucial role in hydrogelation. The hydrogels were found to be stimuli‐responsive and were capable of sensing ammonia and adsorbing water‐soluble dye (methylene blue). All the hydrogelators were biocompatible (MTT assay in RAW 264.7 cells), indicating their suitability for use in drug delivery.     

Triazolyl‐Based Molecular Gels as Ligands for Autocatalytic ‘Click’ Reactions

The catalytic performance of triazolyl‐based molecular gels was investigated in the Huisgen 1,3‐dipolar cycloaddition of alkynes and azides. Low‐molecular‐weight gelators derived from l ‐valine were synthesized and functionalized with a triazole fragment. The resultant compounds formed gels either with or without copper, in a variety of solvents of different polarity. The gelators coordinated Cu^I and exhibited a high catalytic activity in the gel phase for the model reaction between phenylacetylene and benzylazide. Additionally, the gels were able to participate in autocatalytic synthesis and the influence of small structural changes on their performance was observed.     

Gel Sculpture: Moldable,Load‐Bearing and Self‐Healing Non‐Polymeric Supramolecular Gel Derived from a Simple Organic Salt

An easy access to a library of simple organic salts derived from tert‐butoxycarbonyl (Boc)‐protected L ‐amino acids and two secondary amines (dicyclohexyl‐ and dibenzyl amine) are synthesized following a supramolecular synthon rationale to generate a new series of low molecular weight gelators (LMWGs). Out of the 12 salts that we prepared, the nitrobenzene gel of dicyclohexylammonium Boc‐glycinate ( GLY.1 ) displayed remarkable load‐bearing, moldable and self‐healing properties. These remarkable properties displayed by GLY.1 and the inability to display such properties by its dibenzylammonium counterpart ( GLY.2 ) were explained using microscopic and rheological data. Single crystal structures of eight salts displayed the presence of a 1D hydrogen‐bonded network (HBN) that is believed to be important in gelation. Powder X‐ray diffraction in combination with the single crystal X‐ray structure of GLY.1 clearly established the presence of a 1D hydrogen‐bonded network in the xerogel of the nitrobenzene gel of GLY.1 . The fact that such remarkable properties arising from an easily accessible (salt formation) small molecule are due to supramolecular (non‐covalent) interactions is quite intriguing and such easily synthesizable materials may be useful in stress‐bearing and other applications.     

Hybrid Self-Assembled Gel Beads for Tuneable pH-Controlled Rosuvastatin Delivery

This article describes the fabrication of new pH-responsive hybrid gel beads combining the polymer gelator calcium alginate with two different low-molecular-weight gelators (LMWGs) based on 1,3 : 2,4-dibenzylidene-d -sorbitol: pH-responsive DBS-COOH and thermally responsive DBS-CONHNH₂, thus clearly demonstrating that different classes of LMWG can be fabricated into gel beads by using this approach. We also demonstrate that self-assembled multicomponent gel beads can be formed by using different combinations of these gelators. The different gel bead formulations exhibit different responsiveness – the DBS-COOH network can disassemble within those beads in which it is present upon raising the pH. To exemplify preliminary data for a potential application for these hybrid gel beads, we explored aspects of the delivery of the lipid-lowering active pharmaceutical ingredient (API) rosuvastatin. The release profile of this statin from the hybrid gel beads is pH-dependent, with greater release at pH 7.4 than at pH 4.0 – primary control of this process results from the pK_a of the API. The extent of pH-mediated API release is also significantly further modified according to gel bead composition. The DBS-COOH/alginate beads show rapid, highly effective drug release at pH 7.4, whereas the three-component DBS-COOH/DBS-CONHNH₂/alginate system shows controlled slow release of the API under the same conditions. These initial results indicate that such gel beads constitute a promising, versatile and easily tuned platform suitable for further development for controlled drug-delivery applications.     

Photoresponsive Cyclodextrin‐Covered Nanocontainers and Their Sol‐Gel Transition Induced by Molecular Recognition

Springing the trap : Cyclodextrin‐covered mesoporous silica nanoparticles with photocleavable linkers exhibit photoinduced release characteristics and a sol–gel transition that is induced by molecular recognition (see picture). Upon exposure to UV light, the guest molecules were released from the pore by removal of the CD “gatekeeper”, which was linked on the surface of the silica nanoparticle through a photocleavable o‐nitrobenzyl ester moiety.

     

Distance‐Dependent Attractive and Repulsive Interactions of Bulky Alkyl Groups

The stabilizing and destabilizing effects of alkyl groups on an aromatic stacking interaction were experimentally measured in solution. The size (Me, Et, iPr, and tBu) and position (meta and para) of the alkyl groups were varied in a molecular balance model system designed to measure the strength of an intramolecular aromatic interaction. Opposite stability trends were observed for alkyl substituents at different positions on the aromatic rings. At the closer meta‐position, smaller groups were stabilizing and larger groups were destabilizing. Conversely, at the farther para‐position, the larger alkyl groups were systematically more stabilizing with the bulky tBu group forming the strongest stabilizing interaction. X‐ray crystal structures showed that the stabilizing interactions of the small meta‐alkyl and large para‐alkyl groups were due to their similar distances and van der Waals contact areas with the edge of opposing aromatic ring.     

Controlled Self‐Assembly—Synthetic Tunability and Covalent Capture of Nanoscale Gel Morphologies

Tuning structures : We report a synthetically simple yet structurally rich gelator that self‐assembles through hydrogen bonding under different cooling regimes into different nanoscale morphologies (see figure), which can be covalently captured and stabilised by alkene metathesis.

     

Amine‐Directed Hydrogen‐Bonded Two‐Dimensional Supramolecular Structures

Utilizing pure amine hydrogen bonding is a novel approach for constructing two‐dimensional (2D) networks. Further, such systems are capable of undergoing structural modifications due to changes in pH. In this study, we designed a 2D network of triaminobenzene (TAB) molecules that by varying the pH from neutral to acidic, form either ordered or disordered structures on Au(111) surface as revealed in scanning tunneling microscopy images. In near‐neutral solution (pH ≈5.5), protonation of TAB generates charged species capable of forming H‐bonds between amine groups of neighboring molecules resulting in the formation of a 2D supramolecular structure on the electrified surface. At lower pH, due to the protonation of the amine groups, intermolecular hydrogen bonding is no longer possible and no ordered structure is observed on the surface. This opens the possibility to employ pH as a chemical trigger to induce a phase transition in the 2D molecular network of triaminobenzene molecules.     

Insights into the Formation and Structures of Molecular Gels by Diimidazolium Salt Gelators in Ionic Liquids or “Normal” Solvents

Insights are provided into the properties of molecular gels formed by diimidazolium salts both in “normal” solvents and ionic liquids. These materials can be interesting for applications in green and sustainable chemistry in which ionic liquids play a significant role, like catalysis and energy. In particular, two positional isomers of a diimidazolium cation have been examined with a wide range of anions for their ability to form gel phases. In particular, di‐, tri‐, and tetravalent anions bearing aliphatic or aromatic spacers were paired with the divalent cations. The properties of the organo‐ and ionogels formed have been analyzed by means of several different techniques, including calorimetry, rheology, resonance light scattering, UV/Vis absorption, polarizing optical microscopy, and powder X‐ray diffraction measurements. The investigations performed enabled us to obtain a wide range of conductive materials characterized by a high thermal stability and a low corrosiveness of the gelator (organogels) or of both gelator and solvent (ionogels). The information gained should be useful in the broader quest to identify and promote their applications.     

Light‐Controlled Formation of Vesicles and Supramolecular Organogels by a Cholesterol‐Bearing Amphiphilic Molecular Switch

A new responsive material composed of an amphiphilic light‐switchable dithienylethene unit functionalized with a hydrophobic cholesterol unit and a hydrophilic poly(ethylene glycol)‐modified pyridinium group has been designed. This unique single‐molecule system shows responsive light‐switchable self‐assembly in both water and organic solvents. Light‐triggered reversible vesicle formation in aqueous solutions is reported. The molecule shows a different behavior in apolar aromatic solvents, in which light‐controlled formation of organogel fibers is observed. The light‐triggered aggregation behavior of this molecule demonstrates that control of a supramolecular structure with light can be achieved in both aqueous and organic media and that this ability can be present in a single molecule. This opens the way toward the effective development of new strategies in soft nanotechnology for applications in controlled chemical release systems.     

Improved Efficiency of Molecular‐Gel Formation by Adjusting Preorganization of Amino‐Acid‐Derived Flexible Molecules: A NMR and Thermodynamic study

The efficiency of the formation of molecular gels of simple derivatives of l ‐valine and l ‐isoleucine is greatly improved in different organic solvents when a hexyl fragment is replaced by a bulkier cyclohexyl one. A study using NMR and IR spectroscopy provides information on the preferred conformations of the molecules, indicating that the cyclohexyl moiety precludes intramolecular H bonding and preorganises the system for intermolecular interactions, which are responsible for fiber formation. NMR data of the gels provides thermodynamic data on fibrillization, revealing that the origin of this effect is mainly entropic. Electron microscopy (SEM and TEM) images show fibrillar and tape‐like objects, which are observed commonly in molecular gels. Rheological measurements reveal significant differences between cyclohexyl and hexyl appended gelators. These findings could contribute to the rational design of small, flexible, building blocks for self‐assembly.