Dye‐Sensitized Solar Cells Based on (Donor‐π‐Acceptor)2 Dyes With Dithiafulvalene as the Donor

Dipolar metal‐free sensitizers (D‐π‐A; D=donor, π=conjugated bridge, A=acceptor) consisting of a dithiafulvalene (DTF) unit as the electron donor, a benzene, thiophene, or fluorene moiety as the conjugated spacer, and 2‐cyanoacrylic acid as the electron acceptor have been synthesized. Dimeric congeners of these dyes, (D‐π‐A)₂, were also synthesized through iodine‐induced dimerization of an appropriate DTF‐containing segment. Dye‐sensitized solar cells (DSSCs) with the new dyes as the sensitizers have cell efficiencies that range from 2.11 to 5.24 %. In addition to better light harvesting, more effective suppression of the dark current than the D‐π‐A dyes is possible with the (D‐π‐A)₂ dyes.     

Fine Tuning the Performance of DSSCs by Variation of the π‐Spacers in Organic Dyes that Contain a 2,7‐Diaminofluorene Donor

Organic dyes that contain a 2,7‐diaminofluorene‐based donor, a cyanoacrylic‐acid acceptor, and various aromatic conjugation segments, which are composed of benzene, fluorene, carbazole, and thiophene units, as a π‐bridge have been synthesized and characterized by optical, electrochemical, and theoretical investigations. The trends in the absorption and electrochemical properties of these dyes are in accordance with the electron‐donating ability of the conjugating segment. Consequently, the dyes that contained a 2,7‐carbazole unit in the π‐spacer exhibited red‐shifted absorption and lower oxidation potentials than their corresponding fluorene‐ and phenylene‐bridged dyes. However, the enhanced power‐conversion efficiency that was exhibited by the fluorene‐bridged dyes in the DSSCs was attributed to their broader and intense absorption. Despite the longer‐wavelength absorption and reasonable optical density, carbazole‐bridged dyes exhibited lower power‐conversion efficiencies, which were ascribed to the poor alignment of the LUMO level in these dyes, thereby leading to the inhibition of electron injection into the TiO₂ conduction band.     

Metal‐Free Sensitizers for Dye‐Sensitized Solar Cells

This review focuses on our work on metal‐free sensitizers for dye‐sensitized solar cells (DSSCs). Sensitizers based on D?A′?π?A architecture (D is a donor, A is an acceptor, A′ is an electron‐deficient entity) exhibit better light harvesting than D?π?A‐type sensitizers. However, appropriate molecular design is needed to avoid excessive aggregation of negative charge at the electron‐deficient entity upon photoexcitation. Rigidified aromatics, including aromatic segments comprising fused electron‐excessive and ‐deficient units in the spacer, allow effective electronic communication, and good photoinduced charge transfer leads to excellent cell performance. Sensitizers with two anchors/acceptors, D(–π–A)₂, can more efficiently harvest light, inject electrons, and suppress dark current compared with congeners with a single anchor. Appropriate incorporation of heteroaromatic units in the spacer is beneficial to DSSC performance. High‐performance, aqueous‐based DSSCs can be achieved with a dual redox couple comprising imidazolium iodide and 2,2,6,6‐tetramethylpiperidin‐N‐oxyl, and/or using dyes of improved wettability through the incorporation of a triethylene oxide methyl ether chain.

     

A Highly Conjugated Benzimidazole Carbene‐Based Ruthenium Sensitizer for Dye‐Sensitized Solar Cells

A new type of carbene‐based ruthenium sensitizer, CB104, with a highly conjugated ancillary ligand, diphenylvinylthiophene‐substituted benzimidazolepyridine, was designed and developed for dye‐sensitized solar cell applications. The influence of the thiophene antenna on the performance of the cell anchored with CB104 was investigated. Compared with the dye CBTR, the conjugated thiophene in the ancillary ligand of CB104 enhanced the molar extinction coefficient of the intraligand π–π* transition and the intensity of the lower energy metal‐to‐ligand charge‐transfer band. However, the incident photon‐to‐current conversion efficiency spectrum of the cell anchored with CB104 (0.15 mM ) showed a maximum of 63 % at 420 nm. The cell sensitized with the dye CB104 attained a power conversion efficiency of 7.30 %, which was lower than that of the cell with nonconjugated sensitizer CBTR (8.92 %) under the same fabrication conditions. The variation in the performance of these two dyes demonstrated that elongating the conjugated light‐harvesting antenna resulted in the reduction of short‐circuit photocurrent density, which might have been due to the aggregation of dye molecules. In the presence of a coabsorbate, chenodeoxycholic acid, the CB104‐sensitized cell exhibited an enhanced photocurrent density and achieved a photovoltaic efficiency of 8.36 %.     

Structure–Performance Correlations of Organic Dyes with an Electron‐Deficient Diphenylquinoxaline Moiety for Dye‐Sensitized Solar Cells

The high performances of dye‐sensitized solar cells (DSSCs) based on seven new dyes are disclosed. Herein, the synthesis and electrochemical and photophysical properties of a series of intentionally designed dipolar organic dyes and their application in DSSCs are reported. The molecular structures of the seven organic dyes are composed of a triphenylamine group as an electron donor, a cyanoacrylic acid as an electron acceptor, and an electron‐deficient diphenylquinoxaline moiety integrated in the π‐conjugated spacer between the electron donor and acceptor moieties. The DSSCs based on the dye DJ104 gave the best overall cell performance of 8.06 %; the efficiency of the DSSC based on the standard N719 dye under the same experimental conditions was 8.82 %. The spectral coverage of incident photon‐to‐electron conversion efficiencies extends to the onset at the near‐infrared region due to strong internal charge‐transfer transition as well as the effect of electron‐deficient diphenylquinoxaline to lower the energy gap in these organic dyes. A combined tetraphenyl segment as a hydrophobic barrier in these organic dyes effectively slows down the charge recombination from TiO₂ to the electrolyte and boosts the photovoltage, comparable to their Ru^II counterparts. Detailed spectroscopic studies have revealed the dye structure–cell performance correlations, to allow future design of efficient light‐harvesting organic dyes.     

Benzotriazole‐Containing D–π–A Conjugated Organic Dyes for Dye‐Sensitized Solar Cells

A series of metal‐free benzotriazole‐based dipolar dyes have been developed as sensitizers for dye‐sensitized solar cells (DSSCs). Different heteroaromatic rings such as furan, thiophene, and selenophene, were used in combination with benzotriazole as the conjugated spacer group. Light harvesting, charge recombination, and electron injection of the cells fabricated are affected by the heteroaromatic ring used in the spacer. The DSSC with the thiophene‐containing dye has the highest conversion efficiency of 6.20 %, which reaches 85 % of the standard cell based on N719.     

New Synthetic Routes towards Soluble and Dissymmetric Triphenodioxazine Dyes Designed for Dye‐Sensitized Solar Cells

New π‐conjugated structures are constantly the subject of research in dyes and pigments industry and electronic organic field. In this context, the triphenodioxazine (TPDO) core has often been used as efficient photostable pigments and once integrated in air stable n‐type organic field‐effect transistor (OFET). However, little attention has been paid to the TPDO core as soluble materials for optoelectronic devices, possibly due to the harsh synthetic conditions and the insolubility of many compounds. To benefit from the photostability of TPDO in dye‐sensitized solar cells (DSCs), an original synthetic pathway has been established to provide soluble and dissymmetric molecules applied to a suitable design for the sensitizers of DSC. The study has been pursued by the theoretical modeling of opto‐electronic properties, the optical and electronic characterizations of dyes and elaboration of efficient devices. The discovery of new synthetic pathways opens the way to innovative designs of TPDO for materials used in organic electronics.     

New Dual Donor–Acceptor (2D‐π‐2A) Porphyrin Sensitizers for Stable and Cost‐Effective Dye‐Sensitized Solar Cells

A series of porphyrin sensitizers that featured two electron‐donating groups and dual anchoring groups that were connected through a porphine π‐bridging unit have been synthesized and successfully applied in dye‐sensitized solar cells (DSSCs). The presence of electron‐donating groups had a significant influence on their spectroscopic, electrochemical, and photovoltaic properties. Overall, the dual anchoring groups gave tunable electronic properties and stronger attachment to TiO₂. These new dyes were readily synthesized in a minimum number of steps in gram‐scale quantities. Optical and electrochemical data confirmed the advantages of these dyes for use as sensitizers in DSSCs. Porphyrins with electron‐donating amino moieties provided improved charge separation and better charge‐injection efficiencies for the studied dual‐push–pull dyes. Attenuated total reflectance–Fourier‐transform infrared (ATR‐FTIR) and X‐ray photoelectron spectroscopy of the porphyrin dyes on TiO₂ suggest that both p‐carboxyphenyl groups are attached onto TiO₂, thereby resulting in strong attachment. Among these dyes, cis-Zn2BC2A , with two electron‐donating 3,6‐ditertbutyl‐phenyl‐carbazole groups and dual‐anchoring p‐carboxyphenyl groups, showed the highest efficiency of 4.07 %, with J_SC=9.81 mA cm^?2, V_OC=0.63 V, and FF=66 %. Our results also indicated a better photostability of the studied dual‐anchored sensitizers compared to their mono‐anchored analogues under identical conditions. These results provide insight into the developments of a new generation of high‐efficiency and thermally stable porphyrin sensitizers.     

Photophysical and Electrochemical Properties,and Molecular Structures of Organic Dyes for Dye‐Sensitized Solar Cells

Dye‐sensitized solar cells (DSSCs) based on organic dyes adsorbed on oxide semiconductor electrodes, such as TiO₂, ZnO, or NiO, which have emerged as a new generation of sustainable photovoltaic devices, have attracted much attention from chemists, physicists, and engineers because of enormous scientific interest in not only their construction and operational principles, but also in their high incident‐solar‐light‐to‐electricity conversion efficiency and low cost of production. To develop high‐performance DSSCs, it is important to create efficient organic dye sensitizers, which should be optimized for the photophysical and electrochemical properties of the dyes themselves, with molecular structures that provide good light‐harvesting features, good electron communication between the dye and semiconductor electrode and between the dye and electrolyte, and to control the molecular orientation and arrangement of the dyes on a semiconductor surface. The aim of this Review is not to make a list of a number of organic dye sensitizers developed so far, but to provide a new direction in the epoch‐making molecular design of organic dyes for high photovoltaic performance and long‐term stability of DSSCs, based on the accumulated knowledge of their photophysical and electrochemical properties, and molecular structures of the organic dye sensitizers developed so far.     

Recent Developments in Dye‐Sensitized Solar Cells

The knowledge of dye‐sensitized solar cells (DSCs) has expanded considerably in recent years. They are multiparameter and complex systems that work only if various parameters are tuned simultaneously. This makes it difficult to target to a single parameter to improve the efficiency. There is a wealth of knowledge concerning different DSC structures and characteristics. In this review, the present knowledge and recent achievements are surveyed with emphasis on the more promising cell materials and designs.     

The Structure‐property Relationships of D‐π‐A BODIPY Dyes for Dye‐sensitized Solar Cells

BODIPY dyes have attracted considerable attention as potential photosensitizers in dye‐sensitized solar cells (DSSCs) owing to their excellent optical properties and facile structural modification. This account focuses on recent advances in the molecular design of D‐π‐A BODIPY dyes for applications in DSSCs. Special attention has been paid to the structure‐property relationships of D‐π‐A BODIPY dyes for DSSCs. The developmental process in the modified position at the BODIPY core with a donor/acceptor is described. The devices based on 2,6‐modified BODIPY dyes exhibit better photovoltaic performance over other modified BODIPY dyes. Meanwhile, the research reveals the correlation of molecular structures (various donor chromophores, extended units, molecular frameworks, and long alkyl groups) with their photophysical and electrochemical properties and relates it to their performance in DSSCs. The structure‐property relationships give valuable information and guidelines for designing new D‐π‐A BODIPY dyes for DSSCs.

     

Organic Dyes Containing Pyrenylamine‐Based Cascade Donor Systems with Different Aromatic π Linkers for Dye‐Sensitized Solar Cells: Optical,Electrochemical, and Device Characteristics

New organic dyes containing pyrenylamine donors in a cascade arrangement and cyanoacrylic acid acceptors have been synthesized and characterized by optical, electrochemical, and theoretical studies. The dyes inherit a D ‐π¹‐D ‐π²‐A (D=donor, A=acceptor) molecular architecture where the π linkers π¹ are changed from phenyl to biphenyl and fluorene, whereas the π linker π² that connects the donor fragment with the acceptor is a phenyl unit. The conjugation pathway linking the two donor segments has been found to play a major role in the optical and electrochemical properties. Shorter π linkers such as phenyl groups facilitate the donor–acceptor interaction while the nonplanar biphenyl spacer decreases the electronic communication between the donors and enhances the oxidation propensity of the corresponding dye. All the dyes display an intense longer wavelength electronic transition,which is attributable to the amine‐to‐cyanoacrylic acid charge transfer. The extinction coefficient of this peak grows dramatically on increasing the conjugation pathway length between the two donor segments. The dyes were used as sensitizers in nanocrystalline TiO₂‐based dye‐sensitized solar cells (DSSCs) and the cascade donor system contributed to the enhancement in the device efficiency due to favorable absorption and redox properties.     

Donor‐π‐Acceptors Containing the 10‐(1,3‐Dithiol‐2‐ylidene)anthracene Unit for Dye‐Sensitized Solar Cells

Two donor–acceptor molecular tweezers incorporating the 10‐(1,3‐dithiol‐2‐ylidene)anthracene unit as donor group and two cyanoacrylic units as accepting/anchoring groups are reported as metal‐free sensitizers for dye‐sensitized solar cells. By changing the phenyl spacer with 3,4‐ethylenedioxythiophene (EDOT) units, the absorption spectrum of the sensitizer is red‐shifted with a corresponding increase in the molar absorptivity. Density functional calculations confirmed the intramolecular charge‐transfer nature of the lowest‐energy absorption bands. The new dyes are highly distorted from planarity and are bound to the TiO₂ surface through the two anchoring groups in a unidentate binding form. A power‐conversion efficiency of 3.7 % was obtained with a volatile CH₃CN‐based electrolyte, under air mass 1.5 global sunlight. Photovoltage decay transients and ATR‐FTIR measurements allowed us to understand the photovoltaic performance, as well as the surface binding, of these new sensitizers.     

Tailor‐Made Hole‐Conducting Coadsorbents for Highly Efficient Organic Dye‐Sensitized Solar Cells

The Y‐shaped, low molecular mass, hole‐conductor (HC), acidic coadsorbents 4‐{3,7‐bis[4‐(2‐ethylhexyloxy)phenyl]‐10H‐phenothiazin‐10‐yl}benzoic acid ( PTZ1 ) and 4‐{3,7‐bis[4‐(2‐ethylhexyloxy)phenyl]‐10H‐phenothiazin‐10‐yl}biphenyl‐4‐carboxylic acid ( PTZ2 ) were developed. Owing to their tuned and negative‐shifted HOMO levels (vs. NHE), they were used as HC coadsorbents in dye‐sensitized solar cells (DSSCs) to improve cell performance through desired cascade‐type hole‐transfer processes. Their detailed functions as HC coadsorbents in DSSCs were investigated to obtain evidence for the desired cascade‐type hole‐transfer processes. They have multiple functions, such as preventing π–π stacking of dye molecules, harvesting light of shorter wavelengths, and faster dye regeneration. By using PTZ2 as the tailor‐made HC coadsorbent on the TiO₂ surface with the organic dye NKX2677, an extremely high conversion efficiency of 8.95 % was achieved under 100 mW cm^?2 AM 1.5G simulated light (short‐circuit current J_SC=16.56 mA cm^?2, open‐circuit voltage V_OC=740 mV, and fill factor of 73 %). Moreover, J_SC was increased by 13 %, V_OC by 27 % and power‐conversion efficiency by 49 % in comparison to an NKX2677‐based DSSC without an HC coadsorbent. This is due to the HC coadsorbent having a HOMO energy level well matched to that of the NKX‐2677 dye to induce the desired cascade‐type hole‐transfer processes, which are associated with a slower charge recombination, fast dye regeneration, effective screening of liquid electrolytes, and an induced negative shift of the quasi‐Fermi level of the electrode. Thus, this new class of Y‐shaped, low molecular weight, organic, HC coadsorbents based on phenothiazine carboxylic acid derivatives hold promise for highly efficient organic DSSCs.     

High Molar Extinction Coefficient Organic Sensitizers for Efficient Dye‐Sensitized Solar Cells

We have designed and synthesized highly efficient organic sensitizers with a planar thienothiophene–vinylene–thienothiophene linker. Under standard global AM 1.5 solar conditions, the JK‐113 ‐sensitized cell gave a short circuit photocurrent density (J_sc) of 17.61 mA cm^?2, an open‐circuit voltage (V_oc) of 0.71 V, and a fill factor (FF) of 72 %, corresponding to an overall conversion efficiency (η) of 9.1 %. The incident monochromatic photo‐to‐current conversion efficiency (IPCE) of JK‐113 exceeds 80 % over the spectral region from 400 to 640 nm, reaching its maximum of 93 % at 475 nm. The band tails off toward 770 nm, contributing to the broad spectral light harvesting. Solar‐cell devices based on the sensitizer JK‐113 in conjunction with a volatile electrolyte and a solvent‐free ionic liquid electrolyte gave high conversion efficiencies of 9.1 % and 7.9 %, respectively. The JK‐113 ‐based solar cell fabricated using a solvent‐free ionic liquid electrolyte showed excellent stability under light soaking at 60 °C for 1000 h.     

High‐Performance Dipolar Organic Dyes with an Electron‐Deficient Diphenylquinoxaline Moiety in the π‐Conjugation Framework for Dye‐Sensitized Solar Cells

We report here the synthesis and electrochemical and photophysical properties of a series of easily prepared dipolar organic dyes and their application in dye‐sensitized solar cells (DSSCs). For the six organic dyes, the molecular structures comprised a triphenylamine group as an electron donor, a cyanoacrylic acid as an electron acceptor, and an electron‐deficient diphenylquinoxaline moiety integrated in the π‐conjugated spacer between the electron donor and acceptor moieties. The incorporation of the electron‐deficient diphenylquinoxaline moiety effectively reduces the energy gap of the dyes and broadly extends the spectral coverage. DSSCs based on dye 6 produced the best overall cell performance of 7.35 %, which translates to approximately 79 % of the intrinsic efficiency of the DSSCs based on the standard N719 dye under identical experimental conditions. The high performance of DSSCs based on dye 6 among the six dyes explored is attributed to the combined effects of high dye loading on a TiO₂ surface, rapid dye regeneration, and effective retardation of charge recombination.     

Molecular Design Principle of All‐organic Dyes for Dye‐Sensitized Solar Cells

All‐organic dyes have shown promising potential as an effective sensitizer in dye‐sensitized solar cells (DSSCs). The design concept of all‐organic dyes to improve light‐to‐electric‐energy conversion is discussed based on the absorption, electron injection, dye regeneration, and recombination. How the electron‐donor–acceptor‐type framework can provide better light harvesting through bandgap‐tuning and why proper arrangement of acceptor/anchoring groups within a conjugated dye frame is important in suppressing improper charge recombination in DSSCs are discussed. Separating the electron acceptor from the anchoring unit in the donor–acceptor‐type organic dye would be a promising strategy to reduce recombination and improve photocurrent generation.